Create a network safe data collection screen

I am trying to create a data collection screen that will be fool proof if the network should have to fail.
I have created an irpt page that allows inputs and does calculations of this data. I will also have an irpt page that will replace our error page that will appear when the network fails.
The question is can I have the data append to an xml file or append a text file locally on the hard drive? Can I have it smart enough that it will ping the network and/or the database. If everything is up and running to upload the data, delete the xml or text file and reload the original irpt page?

You can also try using AJAX. Maybe make a HTTP call to the backend every few seconds and if the network is down, maybe give a pop-up. GMail does the same thing if it fails to send your mail, for e.g.
But be forewarned that the moment you close the web page, your data will be lost and there will be no way of getting it back. Alternatively you can save the data on the server (using AJAX, again) every few seconds and then when the network is down maybe warn the user with a popup. This way the last saved data will still be available to you.

Similar Messages

Create New Operations for data collection(View Object)

ADF data collection(View Object) supports Create, CreateInsert, Delete, etc operations.
And would like to add more operations like clear, etc. How do i create my own operation and add it to data control for all the view objects in the data control.
Thanks
JP

hi esjp2000
I'm not sure what kind or "clear operation" you are looking for, but I recently asked about a "clear search" in this forum thread:
" ADF BC : "clear search" using executeEmptyRowSet() "
ADF BC : "clear search" using executeEmptyRowSet()
It is about the executeEmptyRowSet() method, and that might not be what you are looking for. (It might not even be what I am looking for because it is undocumented and that is what my question is about and I haven't had an aswer yet.)
But ... it does provide an example of a "service method" Shay is referring to, in the example application:
http://verveja.footsteps.be/~verveja/files/oracle/ClearSearchStuff-v0.01.zip
(So, the specific service method implementation, "ScottServiceImpl.executeEmptyRowSetOnEmpWithParamsVOVI()" in the example, would be different in your case, depending on the specific "clear operation" you are looking for.)
success
Jan Vervecken

Interactive PDF created in CS6 InDesign data collection issue

Created an interactive form from within CS6 InDesign. Uses text fields and check boxes with a submit button to forward the completed form to an email address. When tested in Acrobat Reader, the collected information will not be submitted, just a copy of the form -- blank. Any obvious solutions to this, perhaps a step I missed when creating in InDesign?
Also, my submit button creates an email to send with form completed data input, and attachements too, can then be included. Is there a way to bypass the attachements step for the email and simply have an Include (browse) for attachements while within the interactive PDF?

Which version of Adobe Reader are you using for testing purposes? Adobe Reader XI introduced the ability to save filled out PDF forms and submit them. For earlier versions as far as I'm aware you'd need to create a Reader Extended PDF, which is something you can do in Acrobat, not InDesign.
If you have Adobe Acrobat:
Open the PDF form you created in InDesign then
File > Save as Other > Reader Extended PDF > Enable More Tools... and test it in Adobe Reader again.
To answer your second question, not that I know... (neither in InDesign or Acrobat).
However, if you have a copy of Adobe LivecycleDesigner, you can add a form object that can be used by users to include attachments.
Cari

Can we create a pdf using data collected from a forms central form?

I have a form in Forms Central that is collecting data and I want to take the data and merge the fields into a pdf document with merge fields. Then send the completed merged pdf to someone else automatically?

Hi,
Kindly post your query in FormsCentral forums:https://forums.adobe.com/community/formscentral
Regards,
Florence

How do I create a form using data collected from a previously completed form?

I need my users to fill in an initial registration form with a range of details. Six months or so later I need to ask the users to confirm the details and also fill in new information. Is there a way I can have the second form be automatically populated with the initial form information so they only have to fill in the new information. I need all the information to be stored in the one database. Thanks

Sorry we do not support this workflow.
Gen

Campus Manager No Data Collected from Network

Just intergraged CiscoWorks with ACS. Now when we select Campus Manager | Visualization | Topology Services we get the following error message:
No Data Collected from Network
1.Devices are not availiable from DCR or
2.You have not performed data collection at least once
When we look at Common Services | Devices and Credentials | Device Discovery the total devices discovered and the devices reachable indicate there are devices that were found.
We could see devices fine before the ACS intergration but now, we cannot see any devices.
Any thoughts?

The devices (original clients) that I defined are as follows:
10.0.1.*
10.0.10.*
10.0.2.*
I was able to see these clients. Deleted the above clients from ACS and added:
10.0.1-10.*
So that I can see the above clients and others (10.0.3.*, 10.0.4.*,etc).
I can still see the original clients only. The others show up in Devices not configured in ACS report.
What do I need to do? What did I miss?

Please help with creating a summary report from data collected in a fillable PDF form.

I'm sure this has been asked before so I apologize in advance - I'm new to this forum and I'm not quite sure of which section I should be in. If I may just describe a certain scenario of something I am trying to create - could you please point me in the right direction?
I'm looking to create a summary report/form to help me better organize my patients after each appointment. So data collected from other fillable forms I've created, will lead to the final page to print that will include selections from fillable text boxes or drop down lists, etc to basically summarize each encounter. It should go something like this:
FORM 1:
-pt chart #
-pg age
-purpose for visit
-date of visit
-diagnosis
-prognosis
-etc
SUMMARY page
On (-date of visit), patient (-pt chart #) arrived with complaint of (-purpose for visit)....
The diagnosis was determined to be (-diagnosis), treatment to be performed is suggested to be (-treatment) with a (-prognosis) prognosis. Treatment was (accepted or not) and completed on... etc. etc... you get the idea
Does anyone know how I can do this?
Thank you all for your time and advice!

I have downloaded Castor and got some good tutorials, but.......
There is a problem, when I try to use the Marshaller to get an XML document the following error is reported:
java.lang.NoClassDefFoundError: org/apache/xml/serialize/XMLSerializer
I have scanned the Internet looking for a solution, some recommend including Xecers in the Classpath. I downloaded Xerces 2.7.1 and added it to as instructed but this did not work.
Hope you can help

Data collection task execution in UCMON

Dear Friends
I am using flexible upload method and load from data streams for data upload. Both methods are assigned to my data collection method which in turn is assigned to the task. When i execute the data collection task in consolidation monitor the system executes only the load from data streams and does not give me the option of selecting the method to execute.
To differenciate it i created a new task and assigned only flexible upload method and when i execute this task the system still executes the load from data streams method.
Can anyone guide me as to where i am going wrong?
Cheers
Shivkumar

Hi Mani
I could not follow what you meant to say
"I have done same what u describe, but do not have the issue. Create seperate method for data steam and FU. Then merged both in one method and assigned such method to one task and no issue.. I face that u described,
Can you assign the method to the task, starting from the same starting period and check again."
Do you mean to say that you did whatever i am doing and you too faced the same problem. But the strange behaviour of the system is when i execute it in "Execute with selection screen" mode the system shows all the methods, however if i run it in update mode the system executes only the "Load from data streams" even if the "Flexible upload" method is assigned.
BTW where do you set the validity for a task?
Cheers
Shivkumar

Collections screen tables in R12

Hi,
I have a requirement to create a new Collector Call history in R12 as these report have been dicommissioned in R12. User is entering the data in Notes and Task tab in the Collection screen. When we select the Organization and select View -Customer- Then it will display all notes in notes tab. I am not able to find out the link between these two.How notes data is displaying customer wise.The table/view AST_NOTES_DETAILS_Vl is having source_object_id field which contains the Customer account ID but when when user enter the notes using Interaction screen then there is no cust_Accout_id. Then how it displays the data? I am really confused... What are the tables names of Interaction screen and what is the link???
Please help..
Thanks,
Joohi

1. choose a db
3. learn sql
3. learn jdbc
4. build db and tables
5. connect to db
6. execute appropriate sql statements
7. btw, consider db connection pooling and dao layer
8. have a nice day

TS2570 Mac will not start up after software up date, just screen with Apple logo and spinning icon?

Mac will not start up after software up date, just screen with Apple logo and spinning icon? I have tried safe start up, unplugged all other cables, no luck?

How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

Is it safe to collect credit card information from donors using a fillable emailable form?

I work for a nonprofit and would like to create a fillable pledge form that we would email to current donors. Our pledge form (which is currently sent and recieved by mail) gives them the opportunity to say how much they'd like to donate and exactly how it should be done (check, credit card, installments, payroll deduction etc). I know how to create the form and how to put an email / print button on the form. What I can't seem to find on any threads is an answer regarding how safe the collected information that is EMAILED back to us would be. Would we be putting our donors at risk by collecting that kind of data via email? If so is there a way to make it safe - and that doesn't make it complicated for our less tech-savvy friends? Would there be any safety difference between creating the form using LiveCycle vs using the pdf form wizard?
Any advice would be much appreciated.

As you are using email as the vehichle for delivery the question isn't how safe is the form ...it is how safe is the email system that is being used.
The form itself will be a PDF so by virtue of that anyone can open it (unless you employ an encryption strategy but that woudl be a nuisance to your clients). You coudl employ a password to open the PDF but again that is a nuisance for your clients. So secure email might be the easiest way.
Normally this is done by posting the form to a web server using https protocols (secure and encypted) and not through email.
Paul

Customer Name on Sales Order not in Data Collections

Hi,
I am looking for some help. My company just did an upgrade from 11i to R12 in the middle of May. As part of the upgrade we installed ASCP. We have noticed that certain customers are not being collected when running Standard Data Collections. We have open sales orders in the system for the customer. The sales order are being collected properly and appear in the plan. When we show the Customer field in the 'Supply/Demand Screen' in ASCP, the field is blank for select customers. Is there anything on the customer master or sales order line that would prevent the customer name from being collected? Any insight would be helpful.
Thanks
Rich

You can go to order organizer screen select the OA NO which you are not able to see in the ASCP workbench, go to line items---using show field get the Demand visible
tab on screen-----default value should be 'Y' if blank then then that could be the one of the reason.

I cant use facetime. but my sister can. we share the same account for itunes.but when i go to face itme and click on create a new account a blank screen pops up. what do i do?when i go to make a new facetime account nothing comes up

i cant use facetime. but my sister can. we share the same account for itunes.but when i go to facetime on my ipod touch and click on create a new account a blank screen pops up and the only thing it says is cancel and account. what do i do?

Please follow these directions to delete the Mail "sandbox" folder.
Back up all data.
Triple-click the line below to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
Quit and relaunch Mail, and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Post your results.
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

No batch input data for screen for VF01

Hi All,
Iam trying to to create billing document using BDC for VF01 with sales order. For single line item it is working fine and that to in Mode 'A'. But while creating invoices using multiple sales orders , Iam getting the following error.
No batch input data for screen 'SAPMV60A' '0102' . Error - 0344.
Kindly help me as I was strucked here.
My code .
    PERFORM bdc_dynpro      USING 'SAPMV60A' '0102'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'KOMFK-VBELN(01)'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_field       USING 'KOMFK-VBELN(01)'
                                  gwa_bdc-vbeln.
    PERFORM bdc_dynpro      USING 'SAPMV60A' '0104'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'VBRK-FKART'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_dynpro      USING 'SAPMV60A' '0104'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'VBRK-FKART'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '=SICH'.
    REFRESH messtab[].
    CALL TRANSACTION 'VF01' USING bdcdata
                     OPTIONS FROM wa_options
                     MESSAGES INTO messtab.
Please <removed by moderator> help.
Thanks ,
Srikanth.A
Edited by: Thomas Zloch on Sep 15, 2011 1:47 PM

Hi Jurgen
LOOP AT git_bdc INTO gwa_bdc.
   refresh messtab[].
    PERFORM bdc_dynpro      USING 'SAPMV60A' '0102'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'KOMFK-VBELN(01)'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_field       USING 'KOMFK-VBELN(01)'
                                  gwa_bdc-vbeln.
    PERFORM bdc_dynpro      USING 'SAPMV60A' '0104'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'VBRK-FKART'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_dynpro      USING 'SAPMV60A' '0104'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'VBRK-FKART'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_dynpro      USING 'SAPMV60A' '0104'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'VBRK-FKART'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '=SICH'.
    REFRESH messtab[].
    CALL TRANSACTION 'VF01' USING bdcdata
                     OPTIONS FROM wa_options
                     MESSAGES INTO messtab.
Error message population....
REFRESH bdcdata[].
ENDLOOP.
Thanks,
Srikanth.A

Error in LSMW for MM41 - "No batch input data for screen SAPLMGMW 0100"

I'm trying to create an LSMW for MM41 to create new Retail articles en Mass. This will be used to only create the Basic view as other LSMW's already exist to maintain the other views. I've created the Recording and setup the LSMW already. My data is read correctly from the source file. When I execute the batch session it fails with the following error - "No batch input data for screen SAPLMGMW 0100".
I assume the fields in MM41 screen are not setup for batch processing. Could someone with more knowledge or experience in SAP Retail please confirm my assumption and explain where this is setup or provide an alternative to creating new articles en Mass via MM41? The direct input method is more suited for MM01 and not MM41.
Regards
Fawaaz

Hi Guys,
Thanks so much for all the prompt responses. My issue is now resolved.
The issue, I'm sure, was my default settings in the MM41 screen which the recording probably took into account or the batch program didn't like. I deleted my recording and created a new one but before I started the recording, I went into the MM41 screen and removed all default values AND view selections. I made my Basic view selection constant in my recording and also in my field mapping. My LSMW for MM41 is now working perfectly.
Just to answer some of the questions above, my LSMW was Reading and Converting the data in my source file fine. When I display the Read and Converted data, it shows the data fields in the correct place.
Thanks again.
Regards
Fawaaz

Create a network safe data collection screen

Similar Messages

Maybe you are looking for