Create a new software component release in sld

hi,
i have a software component ABC whose version is 1.0 and vendor is SDN
software component: ABC
vendor: SDN
version: 1.0
now I created a new software component like
software component: ABC
vendor: SDN
version: 2.0
but in the SLD, when I check the release history tab of one software component, there is no any information about the release relation between these two software component.
Does anyone know how to make it?
Regards,
Hui

Hui,
Please check this michals weblog for any dependencies:
/people/michal.krawczyk2/blog/2005/08/26/xi-are-you-independentfrom-your-dependencies
---Satish

Similar Messages

  • How to Create a New Software Component

    Dear All,
    I am trying to prepare a list of steps to develop add-on products over SAP ECC 6.0.  I was just wondering how to create a Software component for my namespace development, which I would like to assign my development package to.
    Any ideas or guidance is highly appreciated.
    Regards
    VG

    Hi VG,
    I think I am just facing the same issue right now. Like you we do not want to do XI/PI development. We registered namespace and starting on developing a product based on ECC, which should be on a seperate namespace. We have read of AddOn Assembly Kit, but we don't have it for th emoment. We might have it at a later stage.
    Still we would like to create an own Product and SC for shipment purposes. We created Product and SC in SLD but we are not able to select it in the SE80 dialogues of creating development objects. We haven't found away or documentation on how to sychnronize the SCs from SLD to ABAP system.
    Is it possible to create SCs in the systme directly which will then show up for development objects?
    Is it mandatory to have the Assembly Kit? (costs good money)
    Is it possible to do all that in a later stage? (we saw it's possible to reassign SC for dev ojects)
    I know it's been quite some time, I would still highly appreciate a feedback as SAP docu is very limited.
    best,
    Stefan

  • Insufficient authorization to import software component version from SLD

    hi guru
    i can not import software component version from SLD into ESR. once the software component version has been chosen, a message will be displayed,  Insufficient authorization to create object ElementTypeId: 0, Name: SALES, Vendor: sap, Version: 1.0, GUID: 32e93300b3e511decc06ecae0a421877, after CREATE button has been clicked.
    any ideas? thanks
    Edited by: Stephen Xue on Oct 8, 2009 12:00 PM

    Hi Stephen,
    If you want to create the SWCV and import that SWCV to the IR/ESR then your user having either one of the below roles.
    SAP_XI_ADMINISTRATOR
    SAP_XI_CONTENT_ORGANIZER
    Go to transaction SU01 and give your user name and click on display.
    Now click on Roles tab, here you check the above roles are appearing or not, if not then you don't have privilizes to do that things.
    If you don't have that credentials then contact your BASIS guy.
    FYI
    http://www.erpgenie.com/sap/netweaver/xi/xiauthorizations.htm
    Regards
    Ramesh

  • Creating a new software instrument track in Logic Pro 9

    When I create a new software instrument track in Logic 9, the newly-created track always defaults to "EVP 88 Electric Piano" instead of "Inst 1" like it's supposed to. Why does Logic do this and how can I restore the settings so that it opens the new track as "Inst 1."
    Thanks much!!
    Alex

    That was added around 9.1.1 - presumably so people wouldn't create an instrument and then ask "I created an instrument, but it don't make no sound." 
    You can uncheck the open library box or go to HD>Library>App support>Logic>channel strip settings>Instrument>01 Logic instruments and change the one called something like "EVP88 Electric Piano" to just "Electric Piano."

  • Can not change vendor when creating a new Development Component in NWDS

    Dear friends,
    Im trying to create a new Development Component in NWDS. Our NWDS is connected to NWDI and we are using CM Services option of NWDI.
    Before I could create a DC and change the vendor but now I cant change it anymore. Now, the vendor is by default sap.com and we cant change it and it seems that we also have to put our project in a separate directory. home/ directory or other directories in the list.
    See below screen shots...
    If I make a new DC than we see it like this: home/bpm_test [sap.com].
    If I make a new DC in my LocalDevelopment I can change the vendor and I dont have to choose a home directory.
    Do you have any idea how to change that?
    Any help would be greatly appreciated.
    Thank you in advance,

    HI,
    it seems that the vendor is defined in the NWDI track. That's why you can't change it.
    regards,
    Vasils

  • Problem with importing software component versions from SLD to I.R

    Hi Guys,
    I have some problem in importing my software component versions from SLD to IR. While connecting to SLD it is using the port 50100. Instead of 50000. We are manually correcting it while connecting to SLD. but when we try to import the Software Component Versions from the SLD to IR. It is saying no objects available in 50100. It is not connecting to port 50000. Pls any body help me with some solution. Thanks in advance.
    Regard's
    Kiran.B

    In the Integration Builder page, Click on the Administration and check the following parameters to make sure they are pointing to right SLD system and port.
    com.sap.aii.connect.cr.httpport,com.sap.aii.connect.cr.name,com.sap.aii.connect.landscape.httpport,com.sap.aii.connect.landscape.name
    Also check with Tcode SLDCHECK too

  • Does the updated CC 2014 create a new softwares or just update the old ?

    Hi everyone,
    This question's for saving free space on my hard disk :
    - Does the updated CC 2014 create a new softwares or just update the old ?
    - In that event, can I uninstall the old version of CC ?
    THX !

    Hello,
    here a publication from outside of Adobe. (I fear they have some problems at the moment, I cant reach their wesites):
    http://www.zdnet.com/adobes-2014-creative-cloud-update-desktop-upgrades-new-mobile-apps-cr eative-hardware-7000030627/
    and a German article (I'm sure you can translate it).
    http://www.digitalproduction.com/de/film-video-vfx/details/artikel/adobe-cc-2014/
    What concerns "can I uninstall the old version of CC ?" yes you can, I for my part would keep it for a while, if your harddisk has enough space.
    Hans-Günter

  • Importing a DC and Creating a new development component

    Hi,
    After importing a DC and Creating a new development component, my netweaver developer studio is complaining that the com.sap.tc.webdynpro.progmodel.api.* cannot be resolved.
    And the strange thing is that if i create a local project and then create a development component, the API can be resolved without any problem.
    Can anyone advise what i should do to fix this problem ?
    Thanks.
    Best Regards,
    Daniel

    Hi Daniel
        Go to your project properties and then go to Java build path and in that Libraries tab there you can find number of JARs included in it for reference of the project just compare both imported and newly created projects and try to add the missing JARs in the imported project
    thanks
    Ninad

  • Unable to create new software component

    Hello All,
    I am having these troubles with SLD.
    1) I am unable to create products for SAP Systems in the catalog. Whenver I select a new product the message always says new product for non-SAP system.
    2) I am unable to create software components for products for non SAP systems. Whenever I try adding new software components I get an error on the production state
    Value not allowed by VALUEMAP for property SAP_SoftwareComponent.ProductionState:Released
    Any ideas? I am using NW2004S SP4.
    Thanks

    Hi,
    I am using NW2004s SP06. The same problem persists in SP6 also. As Wolfgang says, If this issue has been resolved in SP5, how come it still persists in SP6?
    Does anyone have any solution?
    Please guide.
    Thanks & regards,
    Sandeep

  • Unable to create DC using software component

    Hi,
    I have created Software component, and later downloaded track into my NWDS but while I am trying to create DC using above Software Component which is in gray out.
    The software component does not support the selected development component type. At least one required DC is not visible.
    I am working on CE7.2,  NWDS v7.2 SP04 PAT0008
    Please let me know how to fix the issue. Appreciate your quick response.
    Thanks in advance.
    cheers
    dev

    Hi Dev,
    Please check required dependancy for the software component which you have created for CE7.2 track and make entries in the Name reservation for custom development. Once you modify then stop/start SLD server. then in the landscape configurator, do the update CMS.
    Please check all the required parameters in CMS are updated properly and you have checkin and imported component in checkin and development tab repestively in transport studio.
    Best Regards,
    Arun Jaiswal
    Edited by: Ervin Szolke on May 17, 2011 3:23 PM

  • Unable to import software component version  from sld

    hi,
    i have also problem with "import software componenet version "
    i got a message like
    "unable to import software component version from
    system landscape directory ......."
    than i gone for SLDCHECK...i got an error it is ............
    calling function LCR_LIST_BUSSINESS_SYSTEM
    Retreiveing data from the sld server function call returned exception code 4
    connection to sld does not work
    check sld function and configuration
    what that i have to do ...to make it work ....please give me any solution for that please give me detailed info
    with regards

    Hi,
    Make sure you have did all the configuration.....
    http://help.sap.com/saphelp_nw70/helpdata/EN/c9/7a1041ebf0f06fe10000000a1550b0/frameset.htm
    cheers
    Sunil.

  • Can we change the Software Component Version's Name?

    Hi everyone,
    Can we change the Software Component Version's Name in the Integration Repository? If we can, how can we change it?
    Regards,
    Nick

    hi Nick,
    Procedure:
    1. create a new software component in SLD
    2. create a new version of this software component in SLD
    3. import in into the repository
    4. try using release transfer to transfer objects
    from old on to the new one
    http://help.sap.com/saphelp_nw04/helpdata/en/e8/e8573ba5f13048be50532fc3fcea9c/content.htm
    5.delete the old software component
    /people/siva.maranani/blog/2005/05/22/how-to-delete-software-component-from-integration-builder
    BTW
    <b>do not chage it in the database!</b>
    Regards,
    michal
    <a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

  • How to create Product, Software Component..after the XI Installation

    Hi Experts,
    SAP XI was installed completely. After this, I would like to test some sample File – File scenario. But I am not sure, how to create the Product, Software Component etc. I am able to login and run the SXMB_IFR to get the XI tools.
    Can some one please provide the initial steps / procedure, what else I need to do (like creating Product, Software Component etc) as soon as the XI installation was finished.
    Thanks in advance.
    Sree

    hi Sree,
    You can create this in SLD>Software Catalog>new Software component and create the SWC with the new version.
    As you know, the SWC acts as place holder for all your design objects. In simple terms, the newer version will be an enhancement to your older released version with added functionality.
    Also refer to the following links on help.sap.com for more detailed explanation and look for the compatibility changes when developing a new software component version.
    http://help.sap.com/saphelp_nw04/helpdata/en/29/17647d028113439108ce1161263b6e/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/71/0b99063e1f974d9f25951746d04dc3/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/87/59c5726d8b5141bf22831a6ce79d8a/content.htm
    /people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
    /people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
    /people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
    /people/scott.braker/blog/2005/01/20/software-deploymentcomponent-archive-basics
    please reward points
    Regards
    Sreeram.G.Reddy

  • Not able to import software component into Integration Repository from SLD

    Hi,
    I am new in XI(PI). I have created Technical system, business system and software component properly.
    But when I go to IR and import the software component, it gives me an error message +*'Unable to read software component versions from System Landscape Directory "sapxi:50000".
    Can anyone tell me the reason for this...and solution...Please help me out...
    Thanks/Regards
    Dinesh Singh.

    Hi,
    As your question says that,your are not able to import your software component version in to IR.
    First better you cross check your software component is available or not in the SLD.
    Can you please go to SLD and got to search field and give your software component name and search for the availablity.If you are able to see your software component detailse and after referesh your cache.environment->clear sld data cache
    and try once and also please check your SLD information like logical system name and everything and try If still your facing the same problem let me know.
    Just check if the replies in this thread help you:
    unable to import from SLD
    Unable to read software component versions from SLD
    Please reward points
    Thanks
    Vikranth

  • Unable to import Software component from SLD :PI71 SP05

    HI Friends,
         We have created  SWC in SLD.
    From ESR when we click on "Import from SLD".I am getting error "Could not read list of Software component versions from SLD".In details the error is as follows.
    "-- error description--
    Could not read list of software component versions
    from SLD (COULD_NOT_READ_SWCV)
    User credentials are invalid or user is denied access
    All the eight roles for SLD have been provided in SU01.
    SAP_SLD_ADMINISTRATOR
    SAP_SLD_CONFIGURATOR     
    SAP_SLD_DATA_SUPPLIER     
    SAP_SLD_DEVELOPER
    SAP_SLD_GUEST     
    SAP_SLD_ORGANIZER
    SAP_SLD_SUPPORT
    SAP_SLD_CONTENT_SYNC
    In Addition to this any new role need to be assigned?
    Regards
    chandra dasari

    Hi,
    Refer this thread..
    unable to import from SLD
    Hope it helps...
    Thanks,
    Kumar.

Maybe you are looking for

  • What is the purchase register report?

    Hi, Can anyone tell  me what is significance of purchase register .   How this report get in R/3 and BI Thanks and Regards Anil

  • Why my macbook air camera not working? Neither Photo Booth nor Face time.

    I have not been able to use Face Time, Photo Booth and Skype as the camera of my Macbook air is not responding? Any solution guys? Will appreciate the answers from the people who have experienced this problem and have solved it successfully.

  • Doubt in Integration Scenario Creation

    Hi All, My scenario is file to Idoc.Need to create a Integration Scenario. I have stored all the Interface and Mapping objects in teh same Software Component Version (say SWCA). So in Integration Scenario, What will be the Sender and Receiver Softwar

  • RoboHelp HTML Version 8 multiple skins in merged projects?

    Hello, Is it possible to brand different pages in a merged help project w/ different skins, or do you have to use only one skin for the entire project? Thank you, -Jerod

  • X in the battery ICON of my battery.

    I am having a problem where instead of the charge indicator appearing in the right hand corner of the battery icon, an X is being shown...Also, my battery is not fully charging and will only last on its' own for about 30 min...I know something is wro