Create a Storage Location
Hi,
How to create a Storage Location. Plz give me path.
Regards..
Hi,
Path is
SPRO-> Enterprise Structure->Definition-> Material Management-> Maintain Storage location
Regards,
Biju K
Similar Messages
-
Hi all,
How do I create a new storage location.
Thanks in advance.HI,
New Storage Location can be created by using the T.Code:OX09.
After Executing the T.Code OX09,
Give the Plant Name for which you need to create storage location.
Click on Go to New Entries, Enter S.Loc Code and Description and then save.
Number of Storage Locations created for a Plant can be seen at Table T001L.
Thnaks
Sunil. -
Create assign Storage location into Existence Material
Dear Expert in Forums,
I missed to input Storage location in one Existence Material master. Is there any way to assign missing storage location in material master.
Pls help me.
Thanks
Bishnu
02/04hi there
You can use the transation MM01 for extend the material to an storage location, just go to mm01 give your material code go for organization elements mention your plant where you have already created the material and give the storage location in which you want to extend your material, after view selection when you will press enter the system will issue the message that material already exists and will be extended for say X storage location.
Even you can extend your material to an storage location using transaction MMSC by using materal code and plant combination.
Reward if usefull
Regards
Sujoy -
Create storage location at the time of goods receipt
Hi
How do i create the storage location automatically at the time of GR
thanksIn Plant parameter setting flag create storage location automatically
-
Creating storage location in BDC
hi friends
i am creating a storage location through BDC(ox09),
the problem is while saving the records it is asking for customizing request
to avoid that what i need to do?
can any body help in this regard.
it is possible with red book entries
can any body tell me the transaction for that?
with regards
s.janagarHello,
As per my understanding, Creation of Storage Location is Client Specific and does require a Customizing Request to be assigned. So, I think we cannot avoid the Customizing Request.
Thanks and Regards,
Venkat Phani Prasad Konduri -
Hi,
There is a requirement to do a mass creation of storage locations. While creating a storage location, I have to upload data such as
1) Address realted data for storage location(Name, streetm Postal code,city
2) storage type, storage section, print params from storage location
3) WM connect, MRP, fixed bin assignment
Is there any BAPI that suits this requirement.
What is the tcode for storage location creation and updation of this data.
Thanks in advance,
Vishnu PriyaHi,
In OX09 tcode on the left pane, if the 'Address of storage locations' is selected, I got a list with a field labelled 'No.' Is that the address number? Where do I need to update the street/houseno, postal code, city details etc.
Thanks for your quick replies.
Regards,
Vishnu Priya
Message was edited by:
Vishnu priya -
New storage location created in R3- How to push to BW?
HI Friends,
Our R3 consultants created new storage location and how should i push it BW? I checked infoobject: 0Stor_loc. But this is not in 0plant as attribute . How to load the new storage location?
Regards,
SiddhuHi,
Storage location infoobject (0STOR_LOC) has to bring as attribute of 0PLANT. Move this from right panel to left so hat storage location will be visible in attributes of Plant.
Sometimes you can maintain as compounding attribute also. Adjust as per your requirement.
Check this once and then load data accordingly.
Also, check the relevant data in ECC before loading to BI.
Hope this helps,
Regards,
Rama Murthy.
Edited by: Rama Murthy Pvss on Nov 26, 2009 6:33 AM -
Automatically creation of storage location for material, in MF60
Hi all,
my collegue of PP module uses MF60 transaction.
When he puts XXXX as Replenishment storage location, the system tells him this error: To stge loc. XXXX does not exist for material M1010000182 in plant 0001.
In MM i have activate the automatic creation of storage location for plant 0001 and for all movement types.
Why MF60 does not respect this requirement?
If I try to do movement type 311 with MIGO, manually, there's no problem to transfer the material from a storage location to , XXXX s.loc.
Is there something more that I have to do?
Thanks in advance!
Best regards
AlbaThanks a lot...
the note says:
Summary
Symptom
A material without storage location view exists.
If within a single material document, this material is moved in such a way that no change in stock occurs in total, the system does not create a storage location automatically even if this is set in Customizing.
Additional key words
OMC3, XLAUT
Cause and prerequisites
All postings to a segment (for example, material, plant, storage location) are only executed if a change in stock occurs. Only in this case, storage locations are created automatically. This way it is made sure that no empty segments are created.
Solution
The system behaves correctly.
Header Data
Release Status:
Released on: 07.07.2000 22:00:00
BUT why IF i do 311 in MIGO, system creates automatically storage location (also if no change in stock occurs in total).
AND if doMF60 (that does mouvement 311), system does not create automatically the storage location?
Best regards
Alba -
Criteria or points to consider while deciding storage locations
Hi buddies,
We are implementing SAP in steel industry, can anyone let me know wht is the criteria or points to consider while deciding storage locations and what should be an ideal naming convention for storage locations.
Regards,
Sachin NarvekarIt is also depends on the business requirement .If the existing system does not follow any logic then you can use as below
1. You can create material type wise storage location
Raw material Sto loc - 1001
Packing material - 2001
SFG - 3001
Trading goods - 4001
FG godds - 0001
advantage of this approach is stock reports ,inventory documents can be created at storage location level and easy to track material and logicaly correct.
2. Some exceptional cases you have to use separeate storage location .for example production return to some blocked storage location -
Use of Vendor and Customer in 'Define Shipping Data for Storage Location"
Under the stock transfer order configuration, there is a IMG step <b>"Define Shipping Data for Storage Location".</b>
In this at storage location level, we can assign, sales org/distribution channel, division and VENDOR and CUSTOMER to storage location.
The customer number is used a sold-to-party in outbound deliveries.
<b>But I am not able to figure out what's the use of VENDOR number we are specifying in this step.</b>
If I am assiging the VENDOR Number here to every storage location, then when I am creating cross-company code Stock transport order, which vendor code I will select the one assigned to PLANT or one Assigned to Storage location.
<b>Also I need to know what vendor account group I will use for creating this storage location vendor.</b> I have more than one storage locations) under one plant. Soif I used account group as "0007" plant, SAP doesn't allow me to assigne one plant code to 2 vendors and in vendor master on 'additional purchasing data' screen I am not seeing storage location field, it has only 'PLANT' field.
<b>So I need to know-
1. Which account group to use for creating storage location vendor
2. What's the ultimaye use of this vendor code
3. What vendor # I will use while creating cross-company PO (one for plant or one for storage location.</b>
ThanksHi,
Define Shipping Data
Here in this step you maintain the customer number of the receiving plant. This customer number is used in SD shipping processing to identify the goods recipient (ship-to party) if stock transfer to be carried out with an SD delivery
A goods receipt can be planned in the receiving plant.
You can enter a vendor (transport vendor) in the stock transport order
In IMG step "Define Shipping Data for Storage Location".
You can assign sales org/distribution channel, division and VENDOR and CUSTOMER to storage location through Plant only.Means this Vendor is created for entering in the STO .This vendor is created for the the Plant (Supplying Plant)so as u can create STO.
Rewards If usful
Regards
Sanjay L -
Purchase info record for PO determine by Storage location
Dear Guru,
Can you please advice when during the creation of PO, is there possible to determine the Purchase info record by the Purchasing Org, material, Vendor as well as "Storage Location".
Reason,
Sometime we need to raise the PO those customer who will be exempted from the governamt VAT or duty which the goods has to delivery to the country Bonded warehouse.
I created 2 Storage location;
1.) 1000 for general WH
2.) 2000 for Bonded Wh
So i would like to know if we can create 2 different info record determine by Storage Location?
Thank you very much,
Regards
Chee WeeHi
In Standard SAP it is not possible -
Storage Location Error duing GR of Subcontarct for The Sales Order Stock.
HI ,
Is there any settings to avoid individual entry of Storage Location field for the child components during the Goods Receipt from Subcontractor for the Sales Order Stock.
As per SAP standard , I have created Separate storage location for Sales order stock components as the Stock provided to vendor . While receiving the header component , System showing error to enter storage location for all the BOM component s . My Requirement is , Storage location should come automatically for the child component while receiving the Header Component.
Yogesh.K.Hi Jurgen,
He's right, the posting is not a bug.
In case of MTO scenario, if components are managed in the sales order / project stock system withdraw them from storage location.
http://help.sap.com/erp2005_ehp_04/helpdata/EN/4d/2b90b043ad11d189410000e829fbbd/frameset.htm
The subcontracting orders are account-assigned to a sales order or a WBS element. Thus, the components are not transferred (using a transfer posting) to the "stock of material provided to vendor" but are directly withdrawn from the sales order stock or the project stock at the time of the goods receipt.
Since the components are not transferred to the "stock of material provided to vendor", we recommend that you use a transfer posting to transfer the provided components to a new storage location (for example, 9999). This enables you to obtain an overview of those stocks that are physically located at the subcontractor. This information is particularly important when you carry out a physical inventory of the sales order stocks and project stocks.
Cs.
Edited by: Csaba Szommer on Jan 5, 2010 7:17 PM -
MD04 - Subreq - Storage location MRP area
Hi all,
I have an issue of Subreq in MD04 which is not assigned to the the good MRP area.
I'm explaining :
Business process
-> I work with a subcontractor
case 1 : either I buy raw material to be processed and delivered it directly to my subcontractor
case 2 : either I send raw material from my physical stock to my subcontractor
-> I create subcontracting purchase order with indication as components, the raw material.
-> In case of the components are already in my subcontractor (case 1), the reservation (Subreq) should not consume my physical stock.
-> In case of the components are in my physical stock (case 2), the reservation (Subreq) should consume the physical stock.
Solution choosen
Then I decided to create a storage location MRP area : "EXTERN" as External.
I assigned a storage location "EXT" to this MRP area.
I assigned this MRP area to the material in MRP1 / MRP Area.
In the purchase order, in the components popup,
For case 1 : I assigned "EXT" as Prod.Stor.Loc and Supply area
For case 2 : nothing special is filled
Issue
For the case 1, althought I assigned the storage location "EXT", the Subcontractor Requirement is not attached to the good MRP area.
WHY?
Remark : I didn't use the subcontracting MRP area because I would like to have 2 cases : case 1 & case 2.
Thank you in advance for your help about this problem which make me nervous !Hello Catherine
Your system is working as designed. The following note explains the system design in more detail:
503497 - Subcontracting and MRP areas
Take a look on the relevant information provided by this note below:
Reason and Prerequisites
The most important point to understand the system behavior is the fact that the withdrawal of the (subcontracting) component is generally carried out during the goods receipt for an SC procurement proposalfrom the subcontractor stock that is managed at plant level from an inventory management point of view and that has no reference to a storage location at all.
This causes that subcontractor requirements can never enter a storage location MRP area, since you can later not post the withdrawal from this MRP area.
Thus SC-requirements always enter the SC segment of the plant MRP area or the SC-MRP area.
The SC MRP area in turn is supplied by stock transfer reservations from the plant MRP area or via third-party order processing through procurement proposals with goods receipt directly to the subcontractor. A supply through the materials planning from a storage location MRP area is not possible.
For the above reason, SC-requirements do also not carry any storage location, since the storage location does not have any control function at all for SC-requirements:
You cannot and you should not determine a storage location MRP area (see above), and the subcontractor MRP area is determined via the vendor of the procurement proposal, thus it is independent of the storage location.
See also Note 376050 on this topic that makes a modification available which prevents the deletion of the storage location in the subcontractor requirements, so that you can use, for example, customer-specific reports to analyze the storage location.
Please observe that the mentioned modification note 376050 only makes the storage location available on table RESB, so that you can use it on custom report. This modification will not make the storage location to be considered by MRP or on MD04.
BR
Caetano -
Inspection lot for Mvt type 311 between two storage location only
Hello all,
I want to create an inspection lot only whenever my material transfer between two particulars storage locations. e.g if i have multiple storage locations, then i need an inspection lot to be created whenever my material transferred from say X S.Loc to Y S.loc only. For other transfers i don't need to create an inspection lot even from Y to X.
For more clarity, suppose i have ten storage locations. i have also created one storage location for my Lab. So I want an inspection lot to be created only when my material transfer to my Lab storage location from any other storage location, not when i transfer from my LAB to any other S.Loc or between two S.Loc other than LAB.
I have activated inspection type 08 but it does not have a restricition on S.Loc.
So please suggest some solution for the same.Dear Amit
In this case what you can do is make a copy of 311 movement type, say Z11. Deactivate QM for 311 and activate QM for Z11
So whenever you want inspection lot to be created use Z11.
You can activate and deactivate QM in QCCO > Quality inspection > Inspection lot creation > inspection for goods movement
Regards
Gajesh -
Transfer material from Storage location to Storage type.
Hello,
At the time of usage decision we are posting the stock in "To Reserve stock" for that we have created seperate storage location ie for Sample material.
we having two samples one is customer sample and other is in house sample both the samples we are posting in same storage location.
Client want to differentiate these two samples, so we have created two storage types.
Now My question is " can we transfer the samples in different storage types from Storage location.
This is the QM and WM integration.
Please advice
Thanks in advance.
Regards
AnilHello Anil
I don't think you can transfer from storage location to storage type.
If your purpose is to differentiate these two samples, then why not use different Sample types with different number ranges and thus identify them. You don't have to get into QM-WM integration just for that.
If you want you may also set up 2 different physical sample locations: That would be ideal.
SPRO/IMG/Quality Management/Quality Inspection/Sample Management/Define Physical-Sample Types
SPRO/IMG/Quality Management/Quality Inspection/Sample Management/Define Number Range
SPRO/IMG/Quality Management/Quality Inspection/Sample Management/Define Physical-Sample Locations
On the application side you may use the sample management procedures to deal with samples. See the following link:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/b8/b9b3341a933f50e10000009b38f83b/frameset.htm
Does that work? Let me know.
Maybe you are looking for
-
Can't open files from My Documents when I'm in Photoshop, Illustrator CS6
When trying to upload a pdf file (or any file) to a website such as a job application site, I get the spinning ball; just hangs up. My only alternative is to force quit Safari or Chrome or whatever I'm using; then I get the error message: Dispatch Th
-
Work flow( step by step procedure)
workflow for release procedure of purchase order
-
I have setup the SMD agent on the satellite system and installed Wily EM. Now I want to setup the introscope agent on the satellite system. I go to Diagnostics setup-> Managed Systems-> Introscope Agent-> I select the Systems - I dont see any J2ee n
-
Only Part of Photos in the iCloud
Hello, I have a PC with Win7 64-bit version and an iPad 1. I set up the Photo Stream on the PC, and the iPad can receive part of the pictures I copied in the upload folder in the PC. I only have around 100 photos in this folder so I don't think it is
-
Hello, could someone point me in the right direction. I am trying to export an image of a plot into a blank Word document using ActiveX. I have attached an image of my attempt. I would like to export it directly without saving to file. I only hav