Create a user report showing feedback

Hi,
I want to be able to give end users some way of viewing feedback (to prevent duplication and check progress) raised against an application and was thinking of using a interactive report that queries the wwv_flow_feedback table. Is this a suitable method or is there another ( more convenient/declarative ) method I could/should use. Any feedback is gratefull received,
Regards,
Kevin.
p.s. I am using APEX v4.2.2 with the EPG

Hi,
You can create end user that can login to application builder, but access only to team development.
Never tested what kind privileges user then have e.g. delete feedback.
But I do not think it is bad idea create app where is interactive report top of APEX_TEAM_FEEDBACK view
Regards,
Jari

Similar Messages

Active users report shows REP-0004: Warning

Hi,
Active users request logfile showing
Enter Password:
REP-0004: Warning: Unable to open user preference file.
How to solve this wraning?And actually what it means
Regards

Hi,
Have a look at the following documents and see if it helps.
Note: 742122.1 - Reports Fail With REP-0004 REP-3000 REP-0069 REP-57054 On a Cloned R12 (12.0.4) Instance
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=742122.1
Note: 210795.1 - Troubleshooting Guide for REP-4 error
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=210795.1
Regards,
Hussein

How to bind the data from user table into user report

Hi All,
Please assist me to bind the data from user table into user report. I did create an user table with data and create a user report template (using Query Print Layout). How can I display my data into report format which I created before? Any sample program or document I can refer?
Platform: SAPB1 2005A
Add On Language: VB.Net 2003
Thanks.
rgds
ERIC

Hi Ibai,
Thanks for your feed back. I give you an example.
Let say now i wanna print employee list, so i will go
1. Main Menu -> Reports -> HR -> Employee List
2. Choose the Selection Criteria -> OK
3. Matrix will display (Employee List)
4. I can print the report click on print button
5. Printing report
My target
1. Main Menu -> Eric_SubMenu -> Employee List
2. Matrix will display (Employee List)
3. Print button
4. Print report
My problem
Now I would like to use my own report format. My own report format means I wanna add on my logo or do some customization within the employee report. So how I am going to do? I only able to display the employee list in matrix. How do I create a new report format and display it.
Thanks.
rgds
ERIC

Use variable in user report ...

hi all, once i create the query with variabel [%0] and [%1] and then i create the user report on saved query form. In report designer i want to display the value of [%0] and [%1] on the report on data field how can i do that ? and what is the use of textbox variabel number and edi box variable on datafilend properties. Thanks

It is my understanding that you cannot print the user input variables in a report. I believe that will be available in a future version, probably 2004.

EM12c User Reported Event from PL/SQL

Hi,
Is there a way to create a user reported event from PL/SQL (similar to emcli publish_event) ?
Thanks

Can you describe your use case? Maybe there are other ways to address the issue.
-Mughees

DIAdem create an user variable for Report

Hi,
I know that i can display in a DIAdem report some pre-defined DIAdem vairiable (such as CurrDate) using @@Variable@@.
I would like to create a DIAdem user variable (from a DIAdem script) to be used in DIAdem report.
1) I have created a variable in my script
Dim myvariable
myvariable = "hello"
2) I have run the scirpt
3) I have put @@myvariable@@ in a Text
But a error message appears : Variable is undefined : 'myvariable'
How could a create a user varaible to be displayed in my report?
Thank
Solved!
Go to Solution.

Hi malexman,
The other option is to create a global variable from a normal (non-user-command) VBScript. There are several ways to do this, but the one we instruct new users to implement is the "GlobalDim" command, like this:
GlobalDim "UserVariable"
UserVariable = "hello"
You will notice that after this short VBScript runs the "UserVariable" changes color to show that it has become a global variable-- at that point you can use it in REPORT (and everywhere else in DIAdem, thus the name "global" variable).
Brad Turpin
DIAdem Product Support Engineer
National Instruments

How to create Variables(User Input Selections) in WEBI Report

Hi Team,
              My requirement is to create a WEBI Report on top of BEx query,I have created a Universe and WEBI Report on this Universe but my doubt is How to create Variables for the User to select.The Input selection should be
User Iputs(All are drop downs)
Distribution Channel :       ->drop down,user can select one
Division:                          -> drop down,user can select one
Department:
Season:
Collection:
Date Format              Valid From:                                 Fiscal Week:
When the user gives the above selections the output should be displayed as
Material No   Description     Markdown Week     Reason code1(under this)        Reason code2(under this)   like that for all the
                                                                            valid from         Amount              Valid from          Amount            Reason code.
I have designed the basic layout of the Report but wanted to know how to design like this,Please help me out in this Format.
Thanks & Regards,
Somu

Hi, depending on the way you set this up (it is not entirely clear if you are talking bex variables or report drop down filters), use the following;
For BEX variables, the choice will be in the
UserResponse("prompt message")
this you can display in the message format you want.
For drop down filters the choice will be in the DrillFilters(), this one will show all selections in one string.
However, if you want to format this to a certain message, you need to use the Formula
DrillFilters([object from drill bar])
This will give you the result of just that one selection. If the user did not select (yet), the value will be "".
Hope this helps,
Marianne

Office365- I created shared mailboxes for a user- they show on web but not on Outlook2013

I created shared mailboxes for a user- they show on web but not on Outlook2013-
If the user logs on to office365 web - I can see the 3 shared folders- but if when she opens Outlook she is not able to see them-
Do they - should they be manually added ? How ?
Thanks !!

Hi,
Thanks for your question.
Not sure what exactly you mean by "created shared mailboxes for a user", by default, Outlook automatically loads all mailboxes to which the user has "Full Access" permission. So please first check if you have granted the right permissions
for that mailbox to the user.
When I say "By default", I mean you didn't disable the Outlook Auto-Mapping service. If you did, then the shared mailbox will not be automatically added to the user's Outlook profile. So please have a check on this:
https://support.microsoft.com/kb/2646504
Also, please note if the shared mailbox was just created, or the user was just added as a member of that shared mailbox, you probably will need to wait for a few hours for the shared mailbox to appear in the user's Outlook folder.
Regards,
Ethan Hua
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Can Power Users or Mgt Create and Design Reports Through Query Designer ?

Dear BI consultants,
Iam new to BI.
My management has requested me to Train Power users from All Modules(FICO,HR,QM,PP,SD,MM) to Create Queries and Design Through Query Designer.
My question is are we suppose to Give query Designer Access to Power users or Mgt so that they can create Queries and reports by themselves.Please Suggest me wht is the Best Practices.
is it feasable to train power users and Mgt as to how 2 create queries. will there be any side effect on the System or our end.
Plz suggest.
wht are the advantages and disadvantages of this.
If I train the Power users then is there any risk of my Job.
since they will be creating all reports by themselves.
wht else can a BI consultant do since iam in a support project.
how do i convince my Mgt?
Plz Suggest.
Thanks Awaiting

This is common procedure maintained in most of the company's for end users.
There is no issue if you train the power users.you will be the first point of contact if they have any doubts.and more over you are supporting for your client right? this can't be handed over to power user or end user. data is imp for the client so there will not be any problem for you, if any issue comes while loading you need to take care of the errors and fix the.
power users or end user will be familiar with Business requirement not with the Query building logic's not with the BW procedure so no worries for you.
as vineeth said its better to keep control regarding the global and key things at your end so that you will not loose contol on the reports.

Report showing Contract, sales order and invoices created

Hii All,
Is there any standard report showing the sales contract, sales orders created with reference to contract and the invoices with some relevant details such as customer, material, invoice value etc.
If i go to VF05 and then select the a line and see the document flow, i get the contract number, sales order number.

Hi,
You need to create a report of this requirement only through development.
Rgds,
Sivarajesh. J

How to show register attribute value in my register users report in FIM 2010 R2

Hi,
How to show register attribute value in my register users report in FIM 2010 R2?
Please suggest on this.
Regards
Anil Kumar

hello,
the only way I know is manage the attribute descriptiona s a property and then enable the pivot table option "Show properties in tooltip".
But I'm interested in what you mean with "using
"OLAP pivot table extension" is an option". How this works?
Thanks
bye
Norman

Creating a custom role does not show up whe creating a user

On portal 10.1.4 I have followed the directions in 10.1.4 Oracle Server Portal Configuration Guide.section 6.1.6.9.1 Example: Defining a User Administrator Role.
However, the newly created role does not show up when I create a new user.
Any suggestions?

This is a bug in 10.1.2.0.2. It works if you create the group from the directory page OID

I've created a character report without user

I've created a character report without user parameters that works just fine.
The moment I've created a user parameter, without even putting it in a query, instead of
a report I've got the message: "REP-1219: 'repeating_frame_name' has no size - length or with is zero".
The same message I've got few times before:
1. When in the Layout Model -> Main Section Width and Height were not set correctly. Setting Width and Height to right numbers solved the problem
2. When 2 frames were overlapping. Turning off Snap to grid and moving the frames just a little from one another solved my problem.
What should I do this time ?
What I have installed is:
Report Builder 6.0.5.35.0
ORACLE Server Release 8.0.5.1.0
Oracle Procedure Builder 6.0.7.2.1
Oracle ORACLE PL/SQL V8.0.5.1.0 - Production
Oracle CORE Version 4.0.5.0.0 - Production
Oracle Tools Integration Services 6.0.5.32.0
Oracle Tools Common Area 6.0.5.32.1
Oracle Toolkit 2 for Windows 32-bit platforms 6.0.5.35.0
Resource Object Store 6.0.5.0.1
Oracle Help 6.0.5.35.0
Oracle Sqlmgr 6.0.5.33.0
Oracle Query Builder 6.0.5.6.0 - Production
PL/SQL Editor (c) WinMain Software (www.winmain.com), v1.0 (Production)
Oracle ZRC 6.0.5.24.0
Oracle Express 6.0.5.11.0
Oracle Virtual Graphics System 6.0.5.32.1
Oracle Image 6.0.5.34.0
Oracle Multimedia Widget 6.0.5.34.0
Oracle Tools GUI Utilities 6.0.5.35.0

SEGURAMENTE UN FRAME TIENE POCA ALTURA,
A MI ME HA PASADO LO MISMO,LO QUE HAGO ES QUE LOCALIZO EL ITEM Y LE DOY MAS ALTURA, POR ALGUNA RAZON REPORTS EN MODO CARACTER NO ACEPTA UNA ALTURA CORTA

How to create a user parameter for a report

Hi,
I am writing a report in ORACLE 6.0, and I need to create a user
parameter for my report.
My database includes fields: item_id, item_cost, and item_desc.
What I want to do is: set up a user parameter for item_cost, and
the report will prompt the user to enter number into this
parameter, then the report will display item_id and item_desc
depending the user-entered item_cost.
thanks.
Jun

My SQL code is below:
select item_id, item_invo, item_desc
from tb_item
where item_invo=:p_1
but I got an error message:
REP-0788:Warning: The value of restricted LOV parameter p_1 is
not among the selectedble values.
Would you help me again? Thanks.
Jun

How to create ZPS Report showing specific Project details?

Hi,
How do I create a custom ZPS report which shows Project details and progress The requirements are to see 20 fields in one single report . The fields which to be seen in the report are Labor Cost, Material Cost,Labor hrs,finish dates, billing plan, Milestones, NWA,Responsible person,Work Center,Warranty information all in one report.
Please advise how to create such a report.
Thanks much!

you can use
ABAP
Query
Report Painter / Writer
to create your won reports
The choice will depend on what exactly you want

Create a user report showing feedback

Similar Messages

Maybe you are looking for