Create Integration Scenario - Step by Step

Hi All,
Can anyone guide me the step by step procedure for creating integration scenario in IR. Thanks
Deno

Hi Deno,
    I think you have got enough idea hw to create a Integration scenaion in the IR itself..any way let me explain my self point ways so you might get atleats one point would give you more advantage.
   First you have to finish the Data types,Message Types,Message Interface and Message Mapping and Interface Mapping after you done with all the above things you will be starting of the below steps for start creating the IntegarationScenario.
1) Click on Integration Scenarios & Integaraton Process in your name space and you will be able to see the three objects..among three select the actions and right click and select new.So enter your action name,here one imoportant point is you need to select two actions one is for sender actiona and another one is receiver action.
2)Give name to the sender action
  For sender:select the outbound interface and select the object type as Message Interface if it is the idoc select the idoc correspondingly,and select the Message Interface for the corresponding sender action (outbound) and same do the for the  receiver action also whre you need to select the Inbound interface.
3) After you done with your actions go to the Integration Scenationand and give name to your Integation Scenation,you will be able to see the one white screen and place the cursor over the white screen and right click and select the Insert Aoppplication Component and select your sender action,select the product  and give name for the role and save it...the process is for sender action and also do the same for the receiver action.
4) After you done with both sender actiona and receiver actions save it and activate.
5)once you activated your integration scenatio go to ID and select the  Tools drop down list and select teh Transfer Integration Scenatio from IR and select the your Integration Scenatio which you have created and click and finish after you done this you will be abel to see your integation scenario in you ID.
Please feel free to ask any doubts when you are doing the same above..
I will be waiting for your queries..
Thanks in Advance.
Chandu

Similar Messages

  • Regarding Integration Scenario and Communication Channel Template

    Dear All,
    1.What is the purpose of creating Integration Scenario in IR?Is it compulsary to create Integration Scenario in Every Case?(I mean Scenario not using BPM and Scenario using BPM).
    2.What is the purpose of creating Communication Channel Template in IR?
    3.If we create Communication Channel Template in IR?Do we need to utilize that Communication Channel Template for creating Communication Channel in ID?
    4.IF we have created Integration Scenario in IR,and we transfered that Scenario from IR to ID,then Do we need to create Sender Agreement,Receiver Agreement,Receiver Determination,Interface Determination?or will they automatically created?
    Please clarify my doubts.Thanks in Advance.
    Regards,
    Ramana.

    Hi Ramana,
    <i>1.What is the purpose of creating Integration Scenario in IR?Is it compulsary to create Integration Scenario in Every Case?(I mean Scenario not using BPM and Scenario using BPM).</i>
    >>> For graphical overview about the sceanrio.It is not compulsary to create Integration Sceanrio.
    <i>2.What is the purpose of creating Communication Channel Template in IR?</i>
    >>> In integration scenario while creating the connection between two actions u need to specify the communication channel templates for Sender and Receiver.
    <i>3.If we create Communication Channel Template in IR?Do we need to utilize that Communication Channel Template for creating Communication Channel in ID?</i>
    >>>You can utilize these templates in ID.After completion to creating the configuration sceanrio need to modify the parameters of the channels.
    <i>4.IF we have created Integration Scenario in IR,and we transfered that Scenario from IR to ID,then Do we need to create Sender Agreement,Receiver Agreement,Receiver Determination,Interface Determination?or will they automatically created?</i>
    >>> From Tools-->Transfer Integration sceanrio from Integration Repository, From input help choose the sceanrio,Continue and click on Finish ,with the same name the configuration scenaro will create in ID.You need to follow the Confiuration steps like <b>Assign services</b> , here need to choose u r source & target business systems and <b>Configure Connections</b> in this step you can cross check the interfaces,mapping,channel templates involved in this sceanrio and <b>Generate</b>. It would automatically generates Sender Agreement,Receiver Agreement,Receiver Determination,Interface Determination. It would shown to u Generation Log, here you can check what are the objects generated and if there are any errors it would shown Number of errors.
    By setting the appropriate channel parameters, activate all objects from change list.Now u can able to test the sceanrio.
    However in latest version it is not compulsoary to create Integration sceanrio in IR and to the above things.You can use Configuration Wizard to do all these things or you can do these mauvally.
    Hope it will helps to clear u r doubts.
    Cheers
    Veera
    >>>Reward points,if it is needful.

  • Not able to add a  business component in Integration Scenario

    Hi Experts,
    I have Imported an Integration Scenario from ESR into ID. I am trying to assign a business component but its showing only the business systems in search result and not any business component. What would be the reason?
    Regards,
    Pranil Shinde

    Hi,
    I have created integration scenario in ESR using two actions for IB and OB interface. Then I have imoprted IS into ID.
    Now in model configurator in ID,  while assigning the business component to Inbound interface action, its not showing me the business compnent created in search result.
    Regards,
    Pranil
    Edited by: pranil shinde on Feb 9, 2012 5:41 PM

  • Configuration Scenario for BPM Using Integration Scenario

    hi All,
    I Have an Scenario where i am using BPM. Most of the blog tells about manually creating all Configuration objects. I had created an Integration Scenario for this scenario by referring to the earlier threads available for same.
    Hoe to Create Integration Scenario for BPM Scenario
    Integration Scenario in BPM  and few more.
    My IS looks like
    Sender App Component - Integration Process - Receiver App Component
    Now when i am trying to create Configuration scenario for same using model configurator, i am getting Model as "Not Configurable"
    And when i click "Configurability Check" Button, i am getting below as status:
    Component view IS_POC_BPM: Connection from receivePayload to getABSPayload does not have an inbound service interface
    Component view IS_POC_BPM : Connection from sendABSPayload to getPayload has no outbound interface
    getABSPayload and sendABSPayload are actions for Abstract interfaces.
    IS_POC_BPM is the Integration Process Name.
    Also in Integration Scenario, when i create connection between sender action to BPM action there is no inbound interface coming. And viceversa.
    Please help me in identifying if i am doing any thing wrong in creating this scenario.
    Is it possible to create Configuration Scenario for BPM Using Integration Scenario?
    Thanks,
    Mayank
    Edited by: Mayank  Gupta on Apr 21, 2010 6:35 AM

    I think you shoudl refer the available Integration Scenarios created for BPMs in IR --> SAP BASIS --> http://sap.com/xi/XI/System/Patterns
    Sender template will have the Action with Outbound Service Interface and then in the BPM Template the action will have Inbound Interface.....then within the BPM itself this inbound will be mapped to Action with Abstract Interface
    may be after looking the Integration scenarios you will get more idea
    Regards,
    Abhishek.

  • Integration scenario and configuration scenario - is it madatory

    Hi,
    Integration Scenarios are not mandatory, the reason for creating them is given in the blog you mentioned:
    The advantages of defining integration scenarios in the Integration Builder (design tool) are as follows:
    · The integration scenario provides you with an overview of the process and the process flow
    · The integration scenario club together all objects like SWVC,Interface objects, mapping objects,integration processes.You can access all of these objects from the integration scenario.
    · The integration scenario gives you the design time information which is required for its configuration.
    The configurtation items are getting created.
    Regards
    Patrick

    Hi Priya,
       There are two things here.
    1) Create the Integration Scenario in the IR.
    2) Use the wizard to configure the integration scenario in ID.
    The Integration scenario created in the IR acts as a template to create the configuration objects in ID.
    The wizard will create the actual configuration objects only (not just documentation).
    But creating integration scenarios is not mandatory.
    YOu can as well create all the configuration objects manually.
    Generally, you will go for Integration scenarios if you are building a general purpose product (Product based ).
    If it is a project that you are building for a particular customer, you can chose to create the configuration objects using the configuration scenario approach.
    Regards,
    Ravi kanth talagana

  • SCENARIO CREATION IN INTEGRATION SCENARIO

    hi
    I have one sender and two receivers. I am creating integration scenario in repository. in integration scenario creation i have to create three swim lanes or
    two swim lanes? can i add both receivers in one swim lane? and how will i made
    connection between sender and both receivers?
    can any one please help me?
    thanks&regards
    venkat

    Hi Venky,
    I guess you will be sending the same data to both receivers.
    So you do not have to use 3 swim lanes. Create only 2 swim lane.
    1. One for Sender
    2. Second one for Receiver (no need to think here for 2 receivers, think it when you do receiver determination)
    Now, Making a connection will be very easy, just select the ACTION of Sender and Receiver and right click and say create connections.
    For creating and working with integration scenario just go through the below link:
    /people/siva.maranani/blog/2005/08/27/modeling-integration-scenario146s-in-xi
    /people/venkat.donela/blog/2006/02/17/companion-guide-to-integration-scenario
    /people/shailesh.mane/blog/2006/06/27/b2b-configuration-part-i--creating-an-integration-scenario
    /people/shailesh.mane/blog/2006/06/29/b2b-configuration-part-ii--creating-the-configuration-using-the-automated-configuration-tool
    If need more help, just reply back.
    Regards,
    Sarvesh
    ****Reward Points if it helped you.
    Message was edited by:
            Sarvesh Singh

  • Integration Scenario's utility in IR/ID ?? & Communication Channel

    Hi All,
    Please clear the following doubt about integration scenario and communication channel.
    1. Is it necessary to create integration scenario in the IR(design) and then to import it in the ID(configuration) ?
       Is it possible to create the integration scenario in the ID without even mentioning the same in the IR ?
    2. During the design phase in the ID we get the option to create the communication channel tempelate, What is the purpose of it ? What if we create the communication channel in ID wihout using the IR option... ?
    Thanks and Regards,
    Mona

    Hi,
    Michal had already answered you questions to the point. I just thought of adding few words..
    Integration Scenario basically helps you to define the integration flow and you can use the same during the configuration> Because of this Ur ID work will be simple. As Michal said this is not mandatory and you can goahead without a Integration Scenario.
    For Eg:
    You think of a development enviorinment that there different consultant for Design and Config. I mean the person who is designing will not be doing the config... In this kind of situation how come the config consultant knows which interface to use where... say for instance if you use BPM it really hard to understand it. So either he needs to have a clear documentation with the clear name before he could do the configuration. The integration scenarios helps a lot in this case... The config guy just have to give few parameters and click next, next and done.
    Thanks,
    Prakash

  • Can u deisgn Integration scenario without Integration repository?

    Hello,
    Is it possible to design an Integration scenario to without Integration repository(without creating any repository objects)?
    if yes, How do we do that?
    regards,
    haritha
    [email protected]

    Haritha,
    Do u mean the Integration Scenario <b>Object</b> in XI? I think we can't create Integration Scenario Object without IR. More over u have to create Integration scenario itself in IR only right?
    Or u mean that u want to create some scenario's without IR object. If yes then its definitely possible.
    Can u clarify which one u refer here.
    raj.

  • Steps to create a Scenario in XI.

    Hi All,
    Can someone send me Step by step procedure to create a Scenario in XI. What all steps are involved in Repository and Directory.
    Thanks,
    Shridhar.

    Hi,
    Here is some of scenarios link, hope this will help.
    /people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters - IDoc to File
    /people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy - ABAP Proxy to File
    /people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30 - File to JDBC
    /people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy - File to ABAP Proxy
    /people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1 - File to File Part 1
    /people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2 - File to File Part 2
    /people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping - Any flat file to any Idoc
    /people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit - File to RFC
    https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] [original link is broken] - File to Mail
    /people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i - Dynamic File Name Part 1
    /people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii - Dynamic File Name Part 2
    /people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm - Collection of IDoc to Single File
    /people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address - Dynamic Mail Address
    /people/siva.maranani/blog/2005/05/25/understanding-message-flow-in-xi - Message Flow in XI
    /people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm - Walk through BPM
    Thanks,
    Prateek

  • Step by Step procedure to create an entire scenario Using CAF

    Dear All,
        I have a scenario to develop using Composite Application Framework.After creating the CAF i need to display the CAF on the portal. step by step procedure(if possible with screen shots) to create a CAF and how to find web services and then display this application on portal.
    Thanks

    Hi Yogi,
    In your sceanario if you are looking to build either Enity or Application service then create it and test that service from "Service Browser". Once your service is working as per your reqyurements then we have to options to bring it into the Portal:
    1. Generate Web Service for you Service (Entity or Application).
    2. Consume that Web Service in WebDynpro application using Model concepts.
    3. Deploy your WebDynpro Application into your portal Server.
    4. Create a WebDynpro iView for your application and assign it any where you want.
                                                         OR
    1. Generate WebDynpro model for your CAF application.
    2. Create a public part for you application webdynpro project of your CAF application.
    3. Create a new WebDynpro DC and use the Models generated for your CAF application.
    4. Deploy your WebDynpro Application into your portal Server.
    5. Create a WebDynpro iView for your application and assign it any where you want.
    If you can give your complete scenario then that would be more helpful for any one to provide best answer which is approapriate for you.
    Thanks,
    Uday.

  • Steps to create a Scenario for VC Demo purpose

    Hello Guru's,
    Will anyone guide me the steps by step procedure  to create a scenario on VC  in a system to show the client.  will guide me to create a simple scenario.  It will be of great help.
    Full points to the scenario steps.

    Is your question pertaining to Variant configuration
    If yes, please go through this link
    http://www.slideshare.net/arun_bala1/variant-configuration-overview/

  • Steps to create a Scenario for VC Demo purpose in a System

    Hello Guru's,
    Will anyone guide me the steps by step procedure  to create a scenario on VC  in a system to show the client.  will guide me to create a simple scenario.  It will be of great help.
    Full points to the scenario steps.

    Hi
    Can you please check the link below should help to a great extent.
    Thanks
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf

  • Step-by-Step procedure to create an InfoPackage Group & a Scenario!!

    Hello BW Experts,
    IF we have 10 InfoPackages and if we need to create an InfoPackage Group for 7 of them, How do we do it??
    Plz provide a detailed Step-by-Step procedure for the same/ create an InfoPackage group!!
    Ur help is really appreciated!!
    Thanks & Regards,
    Sapster.

    Hello Stefan,
    Thanks for ur response...with ur detailed steps..really helpful.
    While sheduling at the last ..by clicking the context menu of our created IP Group.. I am not getting any screen to schedule the same..(I am getting amessage at the mottom saying its not possible to run it in the back ground for my client workstation or similar to this)
    Could u plz let me know.. what it looks like for these remaining steps
    "Right click on the InfoPackage Group that you just created -> Schedule -> Check that all InfoPackages are selected -> Schedule the job just as you normally do with a InfoPackage."... thansk again.. assigend points...

  • Abap to mass create business scenarios, business process, and process steps

    HI,
    Really struggling to figure out how to mass create "folders" in the business blue print structure.      Periodically we will need to add in a new business scenario with everythign associated with it.  the business has already written up all the information in excel sheets and we would like to avoid having to manually enter this data every time..   These scenarios and process etc are project specifc.
    Has anyone done this before? I have been playing with SOLAR_STRUCTURE_CREATE and while i can see the lines being added into table, i can't get anything to appear after wards in SOLAR01.
    Any and all help greatly appreciated
    Sara

    Hello.
    I was searching how to use the program RS_SOLAR_IMPORT_STRUCTURE for mass create business scenarios in Solar01.
    I saw you was in the forums about this. Do you got to do?
    Can give me this development?
    Thank you for your help.

  • BPM integration with BRM step by step

    Hi All,
    I am looking for a blog for complete scenario which includes business rules used in BPM,that is ,complete STEP BY STEP blog for BPM integration with BRM.Searched a lot but finding either BPM or BRM or BRM already created without mentioning steps and imported in BPM process.
    Can you help me with a complete blog for BPM integration with BRM STEP BY STEP blog?
    Thanks in advance

    Hi,
    Please check if the below articles are useful
    http://scn.sap.com/thread/3446620
    http://scn.sap.com/docs/DOC-47066
    http://scn.sap.com/docs/DOC-4588
    Regards,
    Sriram

Maybe you are looking for