Create Project and BBP

Hi,
Iam new to solution manager,clarify my doubts,How to create projects,whats the use of create projcets.I want to generate BBP for textile industries thorugh my solution manager how we have to generate BBP from solution manager.
Thanku

Dear Friend,
This is a very common question you can search the forum and service market place you can get all the relevant data for the same
secondly in solman which role are you playing solution or technical(basis).......
can go thru the learning map of solution or technical consultant....
Also check the below blogs...they r gud and will solve ur purpose ...
/people/sapna.modi/blog/2007/09/17/sap-solution-manager-40--project-preparation-phase-part-ii
/people/sapna.modi/blog/2007/06/28/sap-solution-manager-40-project-management--business-blueprint-phase-part-iii
Also ask ur Basis team to set up the landscape insolman smsy transaction so that you can add the logical comp for the same while project creation..
Regards
Prakhar

Similar Messages

Creating projects and wbs elements

I am running a conversion and for the upload portion I need to create projects and the relevant wbs elements in the system. I have been looking over the forums etc and have seen many notes regarding BAPI_BUS2001_SET_STATUS, BAPI_PROJECTDEF_CREATE, and BAPI_PROJECT_MAINTAIN.
My problem is this.
I need to update the APPR and PREP system statuses of the projects I create and I can find no way to do this with a BAPI. I also need to update the location of the project (stort) and the only BAPI I can find that will allow me to do this is BAPI_PROJECT_SAVEREPLICA which seems incorrect to use in this manner.
in short:
How do I update project system status of PREP and APPR?
How do I update project location (stort)?
Having no luck finding solutions so any help is appreciated.

Hi,
I've used these BAPIs but not for your fields. But maybe I can help you. There is no field LOCATION in the project definition but there is field LOCATION on WBS level. So have you tried to change this field on all WBS elements for your project?
Unfortunately your system statuses are not supported by this BAPI. All supported statuses are mentioned in BAPI documentation. There is a FM STATUS_UPDATE_PROJECT which might help you but you need to be careful what you do. There are some additional FM STATUS_* for generic object status modification but again, you have to be sure that you can set up that system status without any additional checks.
Good luck

Why can´t I create projects and tasks into a External Group?

Why can´t I create projects and tasks into a External Group?

At this time, it's not possible to collaborate on a Project with External Contributors or add an Externally-Facing group to a Project. This is functionality that we we hope to add at some point in the future.

Standard network not creating project and WBS automatically

Hi,
I have a standard network with a standard WBS assignment at BOTH header and activity levels.
I created a link to a material in CN08 with this standard network.
Assembly processing has been configured.
When creating a sales order, entering the material... the network create screen appears and the system requests a WBS element.
At this point the system should have created the WBS element.
When I insert an existing active WBS element as a test..., the system message indicates that the network is already assigned to a Std WBS element.
Why is the system not using this assignment to create a project and WBS element form the standard structure?
Thanks

Hi,
As a test...
I've removed the linking of the material and standard network in CN08 - and the system now displayed a screen asking for standard network details.
I create the material and standard network link again in CN08 - and I'm back to the original issue of the network create screen appearing, but the WBS field is blank. The system is not generating the WBS.
So - the system is recognizing the link of the material entered in the sales order and the standard network via CN08. But its not using the Standard WBS used in the standard network AND CN08 setup....
Note: The Std WBS has the planning and billing indicator ticked.
Once again, when creating the sales order, I get the network create screen asking for a WBS element. If I insert an existing WBS element I get the message below. The issue is - I know the standard WBS assignment exists, why isn't the system generating a new operative WBS at this point?
An assignment to a standard WBS element already exists
Message no. CN044
Diagnosis
You have created a network by copying from a standard network. The standard network is assigned to a standard WBS.
However, at the same time, you have made your own assignments to WBS elements.
System Response
When you manually make assignments to WBS elements, the system does not necessarily take the asignments in the standard stuctures into account.
Procedure
When you call up the function replace standard WBS or when you save the network you decide whether the manually created WBS assignments or those fronm the standard structures are copied.

App-V 5.0 SP2 (Office Deployment Toolkit) - Unable to create Project and Visio with different package ID

We would like to create 2 App-V packages with the
Office Deployment Tool
- Visio Std 2013
- Project Std 2013.
The App-V packages are created successfully, the problem is that the package-id of both packages is the same.
When we deploy for example, Visio to a client and afterwards Project, Visio gets replaced in App-V by Project.
Is anyone else facing this issue ?

So I wanted to bring everybody up to speed on some changes. You can manage multiple Office packages by generating different PACKAGEGUID attributes (https://technet.microsoft.com/en-us/library/jj219426.aspx?f=255&MSPPError=-2147217396)
using the Office Deployment Toolkit BUT - the following still applies:
Only one Office package can be deployed to a machine at a time.
Only VL and Subscription Pro options are available for packaging via App-V.
Steve Thomas, Senior Consultant, Microsoft
App-V/MED-V/SCVMM/Server App-V/MDOP/AppCompat
http://blogs.technet.com/gladiatormsft/
The App-V Team blog: http://blogs.technet.com/appv/
The MED-V Team Blog: http://blogs.technet.com/medv
The SCVMM Team blog: http://blogs.technet.com/scvmm/
“This posting is provided "AS IS" with no warranties, and confers no rights. User assumes all risks.”
Steve is there any chance this stance may change, or is there any feedback we can give (we have already followed up with our TAM and have also put in tickets but effectively have not gone anywhere other then to explain what the model of support is)?
To be perfectly honest its a very hard model to support since users are licenses for Visio and Project separately, not to mention the lack of user publishing (targeting) and Office Standard support.
We have put in advisory and problem tickets with MS for months in hopes of using the ODT packages in our non persistent VDI environment but I don't believe it will possible.
In short if we have to separate our images or pools to support the various possibilities we are losing what App-V gains us: on demand (per user) publishing to limit the number of gold images we need.
The loss of Office Standard support also leaves us in a tricky spot, because at the end of the day we have to find a way to support those users.
Not looking to put you on the spot, just hoping there is a way to give effective feedback or discuss how to use the ODT packages in a way that makes life easier, not more restrictive.

Sales order for service should create project and link equipments.

Hi,
I'm trying to create a sales order for a service material through VA01. The problem is that this sales order should create a proyect, but at the same time i should be able to associate several equipments to the item position.
The problem is that if I want to create a project, option " Sched.Line Allowed" should be marked for the item category, But if do it, when i create a sales order, if i want to associate 1 o more equipments to my item position, (Extras-->Technical Objects), i get this message "Serial number profile is missing for material..." instead of the table where i would introduce my equipments.
Is there any solution to this problem or should i proceed in a different way?
Thanks in advance.
Luis.

Hi Luis,
We both are working on the same vertical, I am also working now in elevators and escalators.
We have enabled similar (not same) scenario like this.
When order is created (sales order) using serial number profile, serial no and equipment number are generated. I think even during service order, this can be enabled. The only thing you have to do is to create a profile and link that to material master. Please explore in SD and MM. This is easy to do. This will create equpment no for every item in the service order.
We have also enabled the creation of whole project for the order and one WBS element and network for each of the line items adn this happens automatically. This is done as explained earlier. Creation of standard project, std WBS, std network adn then linking the material codes to these objects in CN08. To my knowledge, this is the only way. If there is one standard project, which is linked to all related standard WBS, then during order creation, a WBS element is created after the creation of a standard project. When project is created, service order is linked to the project. So for other items, this project is taken and the WBS and network are created using this project.
Now your assembly processing, production order, Purchase requisition are taken care of by the usage of components overview for activities in the network and object dependencies. For Production orders, you also have standard BOM, which can be linked to activities in the NW. You can control the materials of the standard BOM using selection condition dependencies. You can also initiate variant configuration in service order to maintain the nature of service and then use dependencies to trigger respective assembling, PR etc.
If you want to do this for multiple eqpmts, you can also use functional location, which links multiple equipments to one place.
The only thing you have to do is to configure this and see. Only then you will get ideas.
Pls let me know if you need more information.

Can't create Project from the Template or access project template

Dear Experts,
We are facing a issue while trying to access the project template/create the project from project template.
we have 4 project template in place and of these two are working perfectly fine but
From remaining two we are not being able to create project and even templates are not accesible , whenever we are trying to access the project template system rotates a circle for some time and keeps us on the same page.
Even when we are trying to create project from the same template, system does the same again rotates the circle for some time and keeps us on the same screen.
And System is not throwing any error for the same (we have checked in the log as well) just not letting us in and not allowing us to create project.
Any Help Will be Highly Appreciated.
Regards,
Rakesh Daiya

Dear Experts,
We were able to find out the issue,
We added 3 groups to the template with "Reviewer" access with "Document Only" Type in the project template.
When we changed the type to "Template and Document" from "Document Only" and system started allowing us to create projects from the template.
Can anyone please help me with one query,
Can we add a group(which includes all the buyers) with reviewer access and with Document only type?
Does this really be a reason behind projects are not getting created from template?
Any help will be appreciated
Regards,
Rakesh Daiya

While creating Projects Using the API, get two errors: 'Customer name must be passed' and 'class category is invalid'

Hi
While trying to Create Projects using the API, I'm getting two types of errors -
The first is : 'API failed in one stage 1 Customer Name is a mandatory Quick Entry field. Value must be passed'
The second is : '
'API failed in one stage 1 Project: '<Project_Number>'
The class category is invalid.'
Both the messages are produced by our custom program. .. however I am not able to understand why the underlying errors occur.
The first error ( Customer Name is a mandatory quick entry field), is caused by Projects that are to be created from Project templates where it is configured with Quick Entry Customer Name required. We are passing Customer Site number ( Party Bill to site number and Party Ship to side number). The site numbers being passed are also set as 'Primary'. Yet they are failing.
For the second Error ( The Class Category is invalid), I rechecked multiple times, the Class categories for the Projects I am trying to create, with the Config in R12 and they are fine. Can't understand the reason for these two issues. Has anyone encountered such an issue ? If so how was it resolved?
Regards
Vivek

HI All
I resolved both the issues. In case there are others facing similar issues, following was the cause and resolution of my errors
1. Error 1: Customer Name is a Mandatory Quick Entry field. Value must be passed.
The cause was that the data loaded into our custom staging table was not in the right fields. This was because the data file values and the CTL were not in sync.
Resolution:
Corrected the data file to be in Sync with the structure defined in the CTL and this loaded it successfully
2. Error 2: The class category is invalid.
The cause of this error was that in the Projects Template (used to create the project from), the Quick Entry setup had a Class Category set as required and I was not passing a value ( a class code value) for that Class Category.
Hope this helps somebody else
Cheers
Turnbill

Creating project as Disc Image after 1 1/2 hours it appeared to be finished but there was message that there was a multiplex error. Checked and no yellow triangles, music on computer, any ideas.

Creating project as Disc Image after 1 1/2 hours it appeared to be finished but there was message that there was a multiplex error. Checked and no yellow triangles, music on computer, and all resources on computer, any ideas??

Hi
And
• free space on Start-Up hard disk ? How Much ?
• Brand and type of DVD used
• Burn Speed ?
• Did You try to first do a "Save as a DiskImage" ? If so - Did it work ?
Yours Bengt W

BAPI's for creating of Project and WBS elements in SAP system.

Hi Guys,
             I was able to use a Wrapper FM for creating the
We have a FM which combines 5 different BAPIs
FM/Wrapper: "Z_LEED_PROJ_WBSELEMT_CREATE"
1)      BAPI_PS_INITIALIZATION
2)      BAPI_BUS2001_CREATE
3)      BAPI_BUS2054_CREATE_MULTI
4)      BAPI_PS_PRECOMMIT
5)      BAPI_TRANSACTION_COMMIT
Requirement: To automate the process of creation of Project and WBSE(Tasks) and create an entries in the PS tables based on the user inputs from the user interface in Visual Composer.
Basically user should be able to create the Projects and WBSE.
Issue: We were able to create the Project with the FM (BAPI_BUS2001_CREATE) but having the issue with the creation of WBSE(Tasks), the user will be entering the inputs for Project Definition, Project Profile and WBSE which are to be created in the UI.
The problem is we are not able to create the WBS elements using BAPI     BAPI_BUS2054_CREATE_MULTI .i will send u the code below .Can anybody correct
   CLEAR it_return.
CALL FUNCTION 'BAPI_BUS2054_CREATE_MULTI'
    EXPORTING
      I_PROJECT_DEFINITION = i_project_definition-project_definition
    TABLES
      IT_WBS_ELEMENT = it_wbs_element
      ET_RETURN = it_return.
APPEND LINES OF it_return[] TO et_return[].
Thanks,
Gopi.

Hi Ramiro,
               This is the entire FM code which is below.
""Local Interface:
*" IMPORTING
*"     VALUE(I_PROJECT_DEFINITION) LIKE BAPI_BUS2001_NEW STRUCTURE
*"        BAPI_BUS2001_NEW
*" TABLES
*"      IT_WBS_ELEMENT STRUCTURE BAPI_BUS2054_NEW
*"      ET_RETURN STRUCTURE BAPIRET2 OPTIONAL
*"      EXTENSIONIN STRUCTURE BAPIPAREX OPTIONAL
*"      EXTENSIONOUT STRUCTURE BAPIPAREX OPTIONAL
DATA: it_return LIKE STANDARD TABLE OF BAPIRET2 WITH HEADER LINE,
        v_error TYPE boolean VALUE IS INITIAL.
CLEAR: et_return, it_return.
CALL FUNCTION 'BAPI_PS_INITIALIZATION'.
Do checks for creating project definition
CALL FUNCTION 'BAPI_BUS2001_CREATE'
    EXPORTING
      I_PROJECT_DEFINITION = i_project_definition
    TABLES
      ET_RETURN = it_return.
APPEND LINES OF it_return[] TO et_return[].
LOOP AT it_return.
    IF it_return-type CA 'EAX'.
      CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
      v_error = 'X'.
      EXIT.
    ENDIF.
ENDLOOP.
IF v_error = 'X'.
    EXIT.
ENDIF.
Do checks for creating WBS elements
CLEAR it_return.
CALL FUNCTION 'BAPI_BUS2054_CREATE_MULTI'
    EXPORTING
      I_PROJECT_DEFINITION = i_project_definition-project_definition
    TABLES
      IT_WBS_ELEMENT = it_wbs_element
      ET_RETURN = it_return.
   APPEND LINES OF it_return[] TO et_return[].
LOOP AT it_return.
    IF it_return-type CA 'EAX'.
      CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
      v_error = 'X'.
      EXIT.
    ENDIF.
ENDLOOP.
IF v_error = 'X'.
    EXIT.
ENDIF.
CALL FUNCTION 'BAPI_PS_PRECOMMIT'
    TABLES
      ET_RETURN = it_return.
   APPEND LINES OF it_return[] TO et_return[].
LOOP AT it_return.
    IF it_return-type CA 'EAX'.
      CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
      v_error = 'X'.
      EXIT.
    ENDIF.
ENDLOOP.
IF v_error = 'X'.
    EXIT.
ENDIF.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
    EXPORTING
      WAIT = 'X'.
ENDFUNCTION.
can u please look at the code and let me know the changes?
Thanks,
Gopi.

Create a dvd from past project and event moved to external hard drive

i have version 7.04 DVD. Moved several projects and events to external hard drive. How do I go to "existing dvd projects" and create a dvd from a completed past dvd project? do i have to move the project and event back to the iMac hard drive..thanks

A iDVD project contain links to the various elements you have used to make the project. Unless you have actually saved the project as an iDVD Project Archive (an option under FILE in iDVD) which can be a very large file because it actually contains all the elements used in the project with adjusted links, simply moving a project (and/or elements used in the project) breaks all the necessary links. Sometimes you can reestablish the links (iDVD usually gives you a chance to try), but it can't always be done.
Good luck.

I am creating a video using the green screen option- I imported a picture for the background of the project and videotaped someone using a green screen. Is it possible to move the video of the person around so it is not blocking the picture behind it?

I am creating a video using the green screen option in iMovie. I imported a picture for the background of the project and videotaped someone using a green screen. Is it possible to move the video of the person around so it is not blocking the picture behind it?

To enable this right you need Acrobat, not the free Reader.
However, starting from Reader X it is possible to add simple markups to any file, unless it has been specifically disallowed by the creator of the file.

OC4J not running after creating workspace and projects.

Created one workspace and added six projects. Added PostGes jar to library manager. Before doing this, the OC4J would run a test application successfully. After creating the workspace and project, I created another simple workspace with two JSP, on linked to the other. When trying to run this project get the following:
Apr 17, 2008 10:51:53 AM com.evermind.server.jms.JMSMessages log
INFO: JMSServer[]: OC4J JMS server recovering transactions (commit 0) (rollback 0) (prepared 0).
Apr 17, 2008 10:51:53 AM com.evermind.server.jms.JMSMessages log
INFO: JMSServer[]: OC4J JMS server recovering local transactions Queue[jms/Oc4jJmsExceptionQueue].
Apr 17, 2008 10:51:55 AM oracle.j2ee.util.LoggingUtils logAndReturnMessage
WARNING: Exception creating connection pool. Exception: oracle.oc4j.sql.config.DataSourceConfigException: Unable to create : org.postgresql.Driver
08/04/17 10:51:55 SEVERE: ApplicationStateRunning.initConnector Error occurred initializing connectors. Exception is: Exception creating connection pool. Exception: oracle.oc4j.sql.config.DataSourceConfigException: Unable to create : org.postgresql.Driver
08/04/17 10:51:55 SEVERE: ApplicationStateRunning.initConnector Stack trace: oracle.oc4j.sql.DataSourceException: Exception creating connection pool. Exception: oracle.oc4j.sql.config.DataSourceConfigException: Unable to create : org.postgresql.Driver
     at com.evermind.server.ApplicationStateRunning.initDataSourceConnectionPool(ApplicationStateRunning.java:2072)
     at com.evermind.server.ApplicationStateRunning.initDataSourceConnector(ApplicationStateRunning.java:2017)
     at com.evermind.server.ApplicationStateRunning.initConnector(ApplicationStateRunning.java:1272)
     at com.evermind.server.ApplicationStateRunning.initConnectors(ApplicationStateRunning.java:345)
     at com.evermind.server.ApplicationStateRunning.initializeApplication(ApplicationStateRunning.java:206)
     at com.evermind.server.Application.setConfig(Application.java:438)
     at com.evermind.server.Application.setConfig(Application.java:339)
     at com.evermind.server.ApplicationServer.addApplication(ApplicationServer.java:1895)
     at com.evermind.server.ApplicationServer.initializeDeployedApplications(ApplicationServer.java:1651)
     at com.evermind.server.ApplicationServer.setConfig(ApplicationServer.java:1034)
     at com.evermind.server.ApplicationServerLauncher.run(ApplicationServerLauncher.java:131)
     at java.lang.Thread.run(Thread.java:595)
Caused by: javax.resource.ResourceException: oracle.oc4j.sql.config.DataSourceConfigException: Unable to create : org.postgresql.Driver
     at oracle.oc4j.sql.spi.ResourceAdapterImpl.createDataSourceConnectionPool(ResourceAdapterImpl.java:106)
     at oracle.oc4j.sql.DataSourceUtils.getDataSourceConnectionPool(DataSourceUtils.java:330)
     at com.evermind.server.ApplicationStateRunning.initDataSourceConnectionPool(ApplicationStateRunning.java:2053)
     ... 11 more
Caused by: oracle.oc4j.sql.config.DataSourceConfigException: Unable to create : org.postgresql.Driver
     at oracle.oc4j.sql.config.DataSourceConfigUtils.createConnectionFactory(DataSourceConfigUtils.java:283)
     at oracle.oc4j.sql.DataSourceConnectionPoolImpl.<init>(DataSourceConnectionPoolImpl.java:108)
     at oracle.oc4j.sql.spi.ResourceAdapterImpl.createDataSourceConnectionPool(ResourceAdapterImpl.java:99)
     ... 13 more
Caused by: oracle.classloader.util.AnnotatedClassNotFoundException:
     Missing class: org.postgresql.Driver
     Dependent class: oracle.oc4j.sql.config.DataSourceConfigUtils
     Loader: oc4j:10.1.3
     Code-Source: /C:/Jdeveloper10/j2ee/home/lib/oc4j-internal.jar
     Configuration: <code-source> in META-INF/boot.xml in C:\Jdeveloper10\j2ee\home\oc4j.jar
Remove the posgres jar from the library manager and still not able to run simple two page applications.
All the projects in the other workspace compile fine. The prolblem is that now I am not able to use the internal OC4J. I remove the workspace with the five projects, and the JARs and the two page app will not run.
The OC4J is running when launched from the IDE, ti just can find the pages.
New install of JDEV and the two page app will run fine. Add two user two user libraries and the app will not run.
Thank you,
Ben Carter

Do you have a database connection to postgress defined in JDeveloper?
JDev might be picking this up and trying to add a datasource for it to the embedded OC4J - so try removing it, or alternatively add the postgress JDBC driver jar files to the libraries node under tools->embedded OC4J preferences.

I have a 27 inch iMac with maverick os. my current version of iMovie (10.0.6) will not open older projects i created in iMovie 9.0.9. I can find the projects and they have a ".rcproject" file extension

I have a 27 inch iMac with maverick os. my current version of iMovie (10.0.6) will not open older projects i created in iMovie 9.0.9. I can find the projects and they have a ".rcproject" file extension

Thank you GeeD. I'm still stymied.
I have moved the Event and Project Folders to the "top-layer of the drive" as the instructions state, right alongside the System Folder, Users Folder and Applications Folders.
When I open iMovie 10.0.8, the Events and Projects Folders are empty:
When I select File/Update Projects and Events, I get an alert box that says iMovie couldn't find any:
Not knowing exactly what is meant by the "top layer" in the instructions, I moved the Events and Project folders back inside the "Movies" folder where I found them (but then not where I would call the "top" layer, but rather "iMac/Users/Home/Movies/iMovieProjects". Then I tried to "Update Projects and Events" and received the same alert: "iMovie could not find any projects or events to update."
Then I tried to update iMovie 9.0 (iMovie '11 version 9.0 (1073)) to version 9.0.9 .
[As an aside, the nomenclature of iMovie drives me nuts. The latest version is 10.0.8, which us newer than iMovie '11.]
Back to the update of version 9.0 to 9.0.9.
Presumably because I have version 10.0.8 installed, I got this alert box:
So, I cannot update version 9.0
and I cannot "Update" the Events and Projects created in version 9.0.

Sync and Create project operation from DTR is taking more than one hour

Hi All.
Recently basis team has implemented the track for ESS/MSS application.So When we import the track to NWDS its showing 500 Dcs.
I have successfully done the Sync and create project operation from DTR for 150 DCS and its take 5 min per Dcs.
However after that when i am trying to sync Dc or create project DC from DTR the operation is taking more than 3 hour per DC.Which should not be the case because for rest 150 DC that i ahve done Sync operation adn Create project operation from DTR it hardly takes 5 min per Dc.As this operataion is taking so much time finally i have close the NWDS to stop this operation.
I am using NWDS 2.0.15 and EP7.0 portal SP15 and NWDI is 7.0
Can any body tell how to solve this issue so that i can Sync and Create project from DTR for a DC within 5 min?
Thanks
Susmita

Hi Susmita,
If the DCs are fine in CBS build, then I feel there is no need to test all of them locally in NWDS.
You can verify some certain applications in these DCs, then you sync & create project for these DCs & test run these applications.
As I get you only need to check ( no changes will be done ), yes you can verify them in small groups (say 20-25 DCs/group) in different workspaces so that no workspace is overloaded.
But why do you want to keep a copy of them locally as you are not making any changes, you can Unsync & Remove these projects once verified & use the same workspace to work on the next set of DCs.
Hope this clarifies your concerns.
Kind Regards,
Nitin
Edited by: Nitin Jain on Apr 23, 2009 1:55 PM

Create Project and BBP

Similar Messages

Maybe you are looking for