Create Sequence command doesn't work on my MSSMS-Microsoft SQL Server Management Studio 11.0.2100.60

Hi!
For some reason Create Sequence command doens't work on my Management Studtio version mentioned above.
Please advise, thanks

What counts is not the SQL Server Management Studio level, but the release level of the SQL Server you are connected to and the the compatibility of the database you are connected to. Run
Select name, ServerProperty('ProductVersion') As ProductVersion, compatibility_level
From master.sys.databases
Where database_id = DB_ID()
Product Version should show as 11.<something> or higher. compatability_level should show as 110 or higher. If either of those values are lower, then that is your problem.
Tom

Similar Messages

How to create a package without BIDS in Microsoft SQL Server Management Studio

I have inherited some SSIS packages that I found I can edit by opening the .dtsx file in my local copy of Microsoft SQL Server management studio. I then get Control Flow tab, Data Flow tab etc. I can add or change or delete any of the control
or data flows. I have found that if I use the same path to the local file where the packages are stored that exists on the server, I can edit the dtsx file on my local machine and copy the dtsx file to the server into the same directory structure and
sucessfully execute the package on the SQL 2008 server.
I have VS 2010 installed. I have read that I have to install VS 2008 to use BIDS from within VS. However, this has not worked out very well. Since I can basically create a new package by deleteing all of the control and data flows from
an existing package, I am in pretty good shape. However, I would just like to know if there is a way to create a new dtsx file from within Microsoft SQL Server management studio. Also one thing I have not been able to change is the event handler
name or package exploration name....it is just an annoyance since it does not cause any problems, just would like to be able to rename it.

Hi Fred,
We cannot develop SSIS package in SQL Server Management Studio. If we use SQL Server Import and Export Wizard, we can save it as a package but the package is rather simple.
We use Business Intelligence Development Studio (BIDS) or SQL Server Data Tools (SSDT) to develop SSIS packages. To develop SSIS 2008 packages, we must use BIDS installed by SQL Server 2008, and the BIDS 2008 can only be integrated with Visual Studio 2008.
To develop SSIS 2012 packages, we use the SSDT installed by SQL Server 2012 which uses Visual Studio 2010 shell and can only be integrated with Visual Studio 2010.
Different versions of SSIS package have different package formats/schemas. If you can create SSIS packages project in you Visual Studio 2010, it means that you have installed SSDT already, and the packages you design are SSIS 2012 packages. If you open and
eidt SSIS 2008 packages in you Visual Studio 2010, the packages will be upgraded to SSIS 2012 package format. SSIS 2012 packages cannot be downgraded to SSIS 2008 packages or deployed to SSIS 2008 server.
Regards,
Mike Yin
TechNet Community Support

Problem to create "New Database Diagram" in Microsoft SQL Server Management Studio for SQL Server 2012 SQL Express

Hi,
I have installed SQL Server 2012 Express edition (name of installation media: en_sql_server_2012_express_edition_with_advanced_services_x64.exe) from MSDN and I have installed the application on my pc with Windows 7 Exterprise.
Everything is working fine except when I am trying to create "New Database Diagram", where I recieve following error message:
TITLE: Microsoft SQL Server Management Studio
Attempted to read or write protected memory. This is often an indication that other memory is corrupt. (Microsoft.VisualStudio.OLE.Interop)
BUTTONS:
OK
I have tried two times to reinstall SQL Server 2012 Express and I have installed Cumulative Update #3 for SQL Server 2012 and restarted the machine, but I have still the same problem with the same error message.
Installed the following fixes:
1) 2012_RTM_DAC_CU3_2723749_11_0_2332_x64
2) SQLServer2012_RTM_CU3_2723749_11_0_2332_x64
These files was installed successful.
How can I solve the problem?
BR
Jan Nilsson

Hi Jan,
Have you installed Visual Studio in your machine?
The problem seems to be related to installing and uninstalling the VS 2011 RC0 program.
The workaround involves copying the files from another PC with SQL 2008 or 2012 from one machine to another. Just replace this folder:
C:\Program Files (x86)\Common Files\microsoft shared\MSDesigners8
See also the following for further details:
http://social.msdn.microsoft.com/Forums/en-GB/vstsdb/thread/d65c71f5-3887-4f2a-bbd3-e799a4ac6fdc
Best Regards,
Iric
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

SQL Server Management Studio has stopped working when changing fonts and colors

I installed sql server management studio 2012 about 3 months ago to test drive and from time to time I'll attempt to change my background color of the TSql editor "In the fonts and colors option under tools"; however, the entire studio crashes
and restarts.
This has been ongoing since I first installed it 3 or 4 months ago, and have waited on posting to a fourm for help, assuming I am not the only one this is happening to I've waited for an update that might fix the issue.
I've got to start on some heavy scripting and that god awful white background kills my eyes. I've got to have a black background or my work day is cut off by about 3 hours becuase of strain.
What can I provide to someone that would help me with this?
Thank you,
Erik
Specialize in software for the construction industry.

Hello,
Could you please apply the following updates and let us know the results?
http://www.microsoft.com/en-us/download/details.aspx?id=35575
http://support.microsoft.com/kb/2790947
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

How to create a database in Sql server management studio

how to create a database in Sql server management studio

One method is to run the SQL statement below from a SSMS query window:
CREATE DATABASE MyDatabase;
You can also right-click on the Databases node in SSMS Object explorer and select New Database.
Dan Guzman, SQL Server MVP, http://www.dbdelta.com

Using LV 8.6 to access database created in MS SQL Server Management Studio

I am using Labview 8.6 to access a database created in MS SQL Server Mgmt Studio, using LabSQL ADO utilities. I don't have LV's add-on DB connectivity toolkit, but just the ADO utilities. Can i do it? If yes, how? I have no experience whatsoever in connecting and accessing data from a DB. An example would help.
Thanks,

Szi wrote:
As for my opinion you cant access without DB connectivity toolkit.
Nonsense.
With LabSQL, you should first find an on-line SQL tutorial and refer to the Microsoft help files. I would recomend creating a UDL file. This is the connection string you use for the ADO Connection Open function. You might want to to get a little help from the db administrator. You'll certainly need help in getting a login and password.
There are examples that come with LabSQL

How to create a composite nonclustered index using sql server management studio

Hi,
How do I create a composite non clustered index using Manage Index and Keys dialogue box?
sukai

See image below:
Kalman Toth Database & OLAP Architect
SQL Server 2014 Database Design
New Book / Kindle: Beginner Database Design & SQL Programming Using Microsoft SQL Server 2014

Opening SQL Server Management Studio causes server to freeze - mouse stops working

I have a virtual server running Windows Server 2012 with SQL Server 2012 on it. Recently I went to open SSMS and it caused the entire server to freeze. I can't click on anything- nothing in SSMS, on my desktop, my taskbar, or anywhere else.
All I can do is close the remote desktop window, log in as a different user and restart the server to get it to unfreeze. I found that I can use keyboard arrows for basic navigation within SSMS and the Enter key to Connect to the database but that's
it. I've tried uninstalling and reinstalling the software with no luck. Event Viewer doesn't log any errors.
We use this server for GIS data so ESRI's ArcSDE programs are also running on the machine- they are acting buggy for some users but not others. I don't know if this is related. We've also been having issues with the backups from vRanger which
have caused random server crashes. Our Server/Network Admin has temporarily disabled backups. I'm afraid the instability has messed something up at a deeper level but I don't know where to start looking. Any advice would be appreciated.
Christina

The GIS people have wanted to have all their software running directly on the server, including SSMS, based on recommendations from their ESRI consultant. I will ask again why this is necessary.
No matter what the consultant says, you can always connect to the server from another machine. (Unless the instance is configured to not accept remote connections.)
While waiting for the server admin to increase the memory of the VM, you can connect to the server with SQLCMD from the command line and issue these commands:
EXEC sp_configure 'max server memory', 2000
RECONFIGURE
go
This restricts how much memory SQL Server can consume, and you should now be able to run SSMS on the server. The performance of SQL Server may suffer, though.
When you get more memory, run the commands above again, but with 6000 instead of 2000.
Erland Sommarskog, SQL Server MVP, [email protected]

2012 SQL Server Management Studio Intellisense Not Working

Hi,
I have read just about every article and checked many options with SSMS and the Server. The server is MS SQL SERVER 2012 SP1 Version 11.0.3339.0 X64.   SMSS is 11.0.2100.60.
I have refreshed the intellisense cache, made sure I wasn't in the SQLCommand Mode and that I had intellisense enabled under the Tools Options and Text_editor.
Intellsense worked great for me when I was running 2008 R2....now nothing, feeling frustrated.   Any new ideas on how to get intellisense back in line would certainly be appreciated.

We were having problems also with intellisense, as it completely stopped working on a SQL Server 2012 instance that was hosting over 100 client databases in a non-transactional development only environment. We tried everything and nothing seemed to
work until I ran an optimize routine that included running DBCC DBReindex, sp_updateStats, and sp_Recompile. This seemed to clean up what ever was blocking intellisense. Now it is working with no problem. I added a SQL Agent job that runs
once a week to perform this optimization. We have not had a problem with intellisense since.
begin
   select identity(int,1,1) as [ID], sd.name as [DBName] into #Databases from master.sys.databases sd where sd.name not in ('master', 'tempdb', 'model', 'msdb')
   declare @DB varchar(128)
           , @SQL varchar(max)
           , @MinID int
           , @MaxID int
   select @MinID = min(id), @MaxID = max(id) from #Databases
   while @MinID <= @MaxID
   begin
       select @DB = DBName from #Databases where ID = @MinID
       print '*** Processing: ' + @DB + ' *****************************************************************************************************'
       set @SQL = @DB + '.sys.sp_MSforeachtable @command1="print ''?'' dbcc dbreindex (''?'', '' '', 80)"'
       exec (@SQL)
       set @SQL = @DB + '.sys.sp_updatestats'
       exec (@SQL)
       set @SQL = @DB + '.sys.sp_MSforeachtable @command1="exec sp_recompile ''?''";'
       exec (@SQL)
       set @MinID = @MinID + 1 --increment
   end
   drop table #Databases
end

Entity Framework doesn't create the database in SQL Server Management 2012, instead it just creates in (localdb)\v11.0 How to fix it?

Hi, I'm Begginer in Entity Framework. Then I'm having some problems.
I created my entities and I give Save Changes. (Ok)
Then, I Tried to Connect with the database through Server Explorer, if I use the instance of the SQL Server Management Studio 2012(PC-PAULO\INSTANCIAPJ) as Server Name, the database doesn't appears but, if I use the the instance (localdb)\v11.0 the dabase
appears.
How to change the save to the SQL Server Management Studio 2012, I don't know where this (localDB)\v11.0 saves.
Help-me Thank you :D

Hello PauloJos,
The code should be ok and it is really strange that the database is only created into the local database in your machine. I am wondering if it is related with the machine environment, could you please have a try with below demo on your machine which works
on my side and if it is possible, please have a try to run your application on other machines to see if it works:
class Program
static void Main(string[] args)
#region https://social.msdn.microsoft.com/Forums/en-US/00eff3c4-2336-4807-9212-e6f2a6c8812e/entity-framework-doesnt-create-the-database-in-sql-server-management-2012-instead-it-just-creates?forum=adodotnetentityframework
using (CFDbContext db = new CFDbContext())
db.Database.CreateIfNotExists();
#endregion
public class CFDbContext : DbContext
public CFDbContext() : base("UltraFoda3") { }
public DbSet<TestOne> TestOnes { get; set; }
public class TestOne
public int ID { get; set; }
public string Name { get; set; }
Config file is similar:
<?xml version="1.0" encoding="utf-8"?>
<configuration>
<configSections>

<section name="entityFramework" type="System.Data.Entity.Internal.ConfigFile.EntityFrameworkSection, EntityFramework, Version=6.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" requirePermission="false" />
</configSections>
<entityFramework>
<defaultConnectionFactory type="System.Data.Entity.Infrastructure.LocalDbConnectionFactory, EntityFramework">
<parameters>
<parameter value="v11.0" />
</parameters>
</defaultConnectionFactory>
<providers>
<provider invariantName="System.Data.SqlClient" type="System.Data.Entity.SqlServer.SqlProviderServices, EntityFramework.SqlServer" />
</providers>
</entityFramework>
<connectionStrings>
<add name="UltraFoda3" connectionString="Data Source=YourServer;Initial Catalog=UltraFoda3;Integrated Security=True;MultipleActiveResultSets=True" providerName="System.Data.SqlClient" />
</connectionStrings>
</configuration>
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Create Slideshow Display sequence property doesn't work

Create Slideshow Display sequence property doesn't work,
I have selcted random but the slideshow always plays in order. I searched the scripts for any logi related to this and other properties set, but cannot find any refernce to any of these propoerties:
transType='Random' transTime='1' firstImage='1' dispSequence='1'>
How can I make the slideshow start with a random image each time?
thanks
s

Hello,
I am back on this question, about how to get the non-flash version of the Creatr Slideshow v1.6 to display the images in a random sequence. Can anyone point me in the right direction, please?
thanks
juno

Visually handicap, needs to increase font size in logic pro, Command doesn't work

Hi,
I'm visually handicapped, and new to logic-pro. I'm having a miserable time reading the internal logic-pro fonts. Command + doesn't work, and I can't find any preferrence or settings options that affect the default font sizes, any ideas?

Unfortunately you cannot change the font size of the main fonts in Logic...
However, there are a couple of other settings you may not be aware of...
1) Under Logic Pro's preferences... go to Display
Now you can change the size of the playhead and Local Windows under the General Tab
You can increase the size of the Logic plugin windows/fonts sizes under the Mixer Tab (I have mine set to 200%)
Note: This setting does not apply to 3rd party plugins.. only Logic's own plugins...
Under the Piano Roll tab you can change the size of Bar/Beats/Division Lines...
2) Using the screen zoom command... Hold down control and scroll on your mouse... will zoom in the screen...
Note: as you are using Mountain Lion there is also a new setting under System Preferences/Accessability
Choose Zoom on the left hand side
Now choose Zoom Style/Picture in Picture and instead of a full screen zoom it provides you with a magnifying glass of sorts to just magnify the area arund your mouse pointer. I find this setting very useful....
Hope this helps...

HT1338 Safari Hide command doesn't work

Now my Safari 6.0 "Hide Safari" command doesn't work (whether clicking the command-H or going up under the Safari menu and down to the Hide Safari command.
Any suggestions anyone? I am about one more issue away from abandoning Safari altogether and just using Chrome and Firefox.

I've made a number of iWeb websites. I notice that I can't "Command +" the text larger or smaller. Is this a function of an iWeb site .. or is there something I'm missing?
What browser are you talking about? If Safari, is it the same with the other major browsers (Firefox and Opera)? Could you provide the url of an example?

Bash command doesn't work after update

I just ran pacman -Syu as normal, but some got many errors like below:
( 3/11) upgrading binutils
error: command failed to execute correctly
and every package except kernel-headers got a error message like that. and then i found most of my bash command doesn't work any more, just like ls and vim. However, some others like pwd and cd still work correctly.
Any one any ideal?
Last edited by ranjiao (2009-11-12 13:26:01)

ranjiao wrote:I removed /lib64 and make a soft link from /lib64 to /lib, as Matlab09 requires a /lib64 containing crt libs.
is this the cause?
Yes.
I've done that before and got into the same problem when updating glibc, the lesson here, don't mess with the default directory structure.

Unhide library command doesn't work

Unhide library command doesn't work in terminal

Open the Terminal application in your Utilities and paste the following at the prompt:
sudo chflags nohidden ~/Library
Press RETURN. Enter your admin password when prompted. It will not be echoed.
The "sudo" may not even be required, but if it is and you don't use it, then you'll get an error message. Just try again using the above command.

Create Sequence command doesn't work on my MSSMS-Microsoft SQL Server Management Studio 11.0.2100.60

Similar Messages

Maybe you are looking for