Created on (AEDAT) field is empty in EKKN

Dear All,
I created a PO ,with account assignement category.
When I query table EKKN with the Created PO no,
I am getting the record,but the field Created on (AEDAT) is empty.
Can any one help in this regard.
Regards,
Seshadri

If the Value field in not Zero then you will see PO creation Date..
generally for Non-valuated material the Net Value & PO creation date will not be updated in EKKN table..
But you will find the creation date in EKKO table for the same PO's..

Similar Messages

Why AEDAT field is empty in EKKN Table.

Hi !
Can please tell, why the AEDAT field is empty for some of the purchase documents in EKKN table.
I can see the aedat in EKKO .
Why some documents have not AEDAT value field populated in EKKN whereas other Purchase documents have value for AEDAT ?
Thanks,
Ajay

Hi,
Basically EKKN is the table which shows the item level details like Account Assignment in Purchasing Document and EKKO is the table which tells about the header information of the purchasing document.
As document creation date does not refer to header information the table EKKN would not shown up the creation date.This may be one of the possible reason.
Regards,

Previewing data in UD Datasource (S:RSSDK:400 field is empty)

Hi,
I followed the steps in creating a datasource for UD connect interface. I was successful in saving and activating the datasource; however, when previewing the data, i am given the prompt: "S:RSSDK:400 field is empty."
I double checked the database wherein it was extracting data from. There was data present.
Any ideas on how to solve my problem?
Regards,
Ramon

Hi
Is there any other UD connect, datasources running without problem?
have a look at these notes: 874549 and 1056046.
Hope this helps
Derya

Need to determine if an Expression field is empty in CR 2011

I have an expression field in a subreport. This field collects a list of computer models to which a given hard drive is assigned. I need the field to always have a border around it even if there is no data. But I have been told by someone on this forum that no border will be generated if the field is empty.
That being the case, I need to find a way to show a blank, bordered field the same size as the subreport window in the event that the subreport has no data. I need to know if it needs to be done in the subreport itself or in the parent report.
Can someone please help me out on this? I've run out of ideas.
Thanks!

Hi,
Yes, that is true. The field borders are not drawn when there is no data for that field.
Here's a workaround though. Create this formula and use this formula field instead of the original database field on the report
if isnull({database_field}) or not({database_field} > 0) or not({database_field} = "") then
space(1) else totext({database_field})
You can then apply borders on this field and you'll see that the field draws the border when there is no value.
If the field that is in the Subreport, then it needs to be done in the Subreport, otherwise in the Main Report.
-Abhilash

Payment terms and Due date field gets emptied after residual clearing

Hi
There is advance of Rs.50000 in Vendor ledger and Invoice of Rs.200000 (with payment term - G019)
I cleared these two line items (residual clearing). One new line item got created of Rs.150000. When i saw that line item, i saw that there payment term field and due date field got emptied. My requirement is that the original payment term entered in initial invoice document (of Rs.200000) should automatically get populated in new line item of Rs.150000.
How to fulfill this requirement?

Thanks for the prompt reply.
I wanted to ask one more thing. Same way when i do partial clearing (not residual), is it possible to populate the invoice's due date in advance line item. One link is that my invoice reference gets populated advance line item. So i want due date (not payment term) also to get populated in advance line item.
Please help.
Edited by: Deepak Agrawal on Jul 29, 2011 11:43 AM

Data in dropdown list field are empty in PDF form

Hi all.
Viewing a pdf form created with SAP interactive Forms offline method, the data in the dropdown list field are empty.
The data in the dropdown list field are generated by xml file produced by an abap report.
The problem occurs opening the form with Adobe Reader 8.1 or higher. Using Adobe Reader release 7.0.9 everything is ok.
Do you have any suggestion?
Thanks in advanced.
Best Regards.
Moreno

Hi Otto,
the only release of Adobe Reader that work is 7.0.9. Release 8.1 and 9 have the same problem where the data in the dropdown list field are empty.
At the end of the trace file in Adobe Reader 9.0.3 I find this error message:
"Invalid version: The current version of the XFA template model exceeds the capability of Acrobat / Adobe Reader 7.0.5."
The form has been created using Adobe Lifecycle Design 7.1.
Any idea?
Thanks
Moreno

Create Blank Signature Field in Acrobat 8

The create blank signature field function is no longer available in Acrobat 8.0, as it was in 6.x and 7.x. This was an extremely useful tool to add a quick signature block to a document you needed digitally signed by another party.
Adobe LiveCycle Designer does have the ability to add the field, but that requires additional steps to convert the document to a form when a forms functionality is truly unnecessary for a simple signature capture.
Please, add this capability back to the native Acrobat program. We have hundreds of users who use this functionality daily.

Jeff,
You are right it is not as it used to be in Acrobat 6 and 7, but it is still there!
Go to Tools->Forms, and select the Digital signature tool.
A cross will show up, and you can use t for placing your new and EMPTY signature field
Tal
[signature deleted by host]

Address field ADRN2 empty in the PO

Hi all,
we are using EKPO-ADRN2 to get all detail of delivery address to copy that across the PO layout.
The thing is for some plant this field is empty.
IS anybody know why ? and how to create an ADRN2 number?
Thank in advance
Cheers
Julien

Hi Julien,
Here's the overview of different address groups, their use, and where they are maintained.
- CA01 Customizing address, storage location or plant address,
maintained using transactions OX09 and OX10.
- ME01 Delivery address maintained in the master data,
Transaction MEAN (EKPO-ADRN2)
- ME02 Manually changed delivery address in PO item (EKPO-ADRNR)
- ME03 Vendor address (EKKO-ADRNR).
So if there's address maintained in MEAN, it will be saved in EKPO-ADRN2.
Thanks and regards,
Polly

DOCTYP and IDOCTP fields are empty

Hello!
I'm using XI with the scenario plan driven procurement. I'm able to bring my orders from MM to SUS, but the purchase order confirmations make some problems.
In transaction SXMB_MONI (SUS) everything is fine, but in R/3 transaction BD87 brings an error: DOCTYP and IDOCTP fields are empty. Detailed info: An IDoc is to be generated whose control record does not have sufficient information in it. Neither the field IDOCTP nor the field DOCTYP has a value. Therefore, the IDoc cannot be stored properly.
Where can I give the system the information about that?
Hoping for help,
Barbara

Hi,
Try to solve the problem like this ,
First check the SWCV is properly configured or not and come back to IR , Refresh the SLD Cache..
Next try to activate SWCV-namespace, objects you created one by one..
refer the below links for cache related issues
/people/sravya.talanki2/blog/2005/12/02/sxicache--ripped-off - SXI_CACHE - Ripped Off
XI Runtime cache error: Cache contents are obsolete
Cache Refresh - SAI_CACHE_REFRESH
/people/sravya.talanki2/blog/2005/11/03/cache-refresh-errors--new-phenomena
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1a69ea11-0d01-0010-fa80-b47a79301290
Regards
Chilla
<i>reward points if it is useful..</i>

Records with a picklist field with empty values can't be seen from a report

Records with a picklist field with empty values can't be seen from a report. I've created a report that have a picklist as a column. When there is no values the record(s) associated to this picklist don't appear. Do you know what are the common causes for this event?
Regards
Arturo

Hi samrat chakraborty ,
go to SUIM > roles > roles by complexselection criteria>
under the selection according to authorization values give the object's form SU53 screen and press enter it will asks the values for given object pass the values as per the SU53 and execute it will give the list of roles.... capture the roles. The user gets access if you give the any one of the listed roles is assigned, assign the role as per your approval process.
Check with the below link for more assistence:
http://help.sap.com/saphelp_erp2004/helpdata/EN/71/8fba30840c6e4d90da3526971cc684/frameset.htm
Regards,
S.Manu.

AET error while creating a new field

Hi Experts,
We have a requirement to create a check box/newfield on Account Details screen in Web UI. I am trying to create a new field using AET but am getting the following error message. Please help.
1. Error during generation of object CI_EEW_BUT000
2. Customizable CSOL conflict for objects changed in other TR.
We have a config TR involving the role field on account details component (BP_HEAD/ACCOUNTDETAILS). Do we need to release the transport before creating any new fields.
The generation of the field fails when I select the extension and click on 'SAVE and GENERATE'.
Please help.
Thanks,
Rohit

Hello Rohit,
Please apply note 1707978 to solve the issue.
thanks
Willie

How to find out the user who has created a new field in the custom table.

How to find out the user details who has created a new field in the custom table.
Thanks,
Joan

Hi Jesudasan ,
You can know the user details with version management.Please find the
below procedure to know.
Go to table->Utilities tab->version->Version management->Compare the previous one .
Hope this solves the issue,Let me know if you have any issues.
Thanks,
Rajani

How to create a new field for Q3 - QM notification in Header and item level

Dear All,
l
Sub: How to create a new field for Q3 - QM notification in Header and item level
Ref. the link --> Quality Notification
We want to create a new field in header level and item level.
As per the thread the solution is given below.
In the IMG Config: Quality Management -> Quality Notification -> Notification Types -> Define screen areas for notification types Then Choose 'Define screen areas' Then Click on 'New entries' button Now, select the relevant Notification Type and click in 'Enter'. Select the 'Iten Cases' register and remember to setup the Tabstrip Header, Icon, etc. Set the 'Tabstrip active' flag. Then Save.
Quality Notification -> Notification Types -> Define screen areas for notification types
WE ARE UNABLE TO FIND IN CUSTOMIZATION PATH --> DEFINE SCREEN AREAS FOR NOTIFICATION TYPES.
Please help.
Question No. 2 :
THE REQUIREMENT IS GIVEN BELOW.
We want to hide the field in Q3 - QM Notification
In header --> Reference tab --> Item (sub heading) --> "DEFECT LOCATION" FIELD TO BE ELIMINATED (HIDE)
Ref the link --> Quality notification
The solutiion is given below.
Hi Sami,
We can hide the collumns using the Transaction OQM1 and Program Name SAPLIQS0.
Lets say Defect location need to be hidden, the field TXTCDOT need to have the radio button HIDE.
Hope this will suffice your requirement.
Kindly ask me if you need any other details.
Thanks & Regards,
Srinivas.D
Hi Sami,
We can hide the collumns using the Transaction OQM1 and Program Name SAPLIQS0.
Lets say Defect location need to be hidden, the field TXTCDOT need to have the radio button HIDE.
Hope this will suffice your requirement.
Kindly ask me if you need any other details.
Thanks & Regards,
Srinivas.D
By double clicking the "DEFECTIVE QUANTITY (EXTERNAL), WE COULD NOT GET --> field TXTCDOT .
Plese do the needful.
We are using ECC6.0 Ehp3 and Ehp4.
With Best Regards,
Raghu Sharma

Dear Pushpa,
Transaction Code :SHD0 is working fine.
Please accept my sincere thanks for your sharing your Knowledge.
I am able to fulfill my
Regarding the enhancement, I have not tried.
Once I will complete, I will award the fulll marks to you.
With Best Regards,
Raghu Sharma

Can I create a salutation field to print labels like, "Rob & Julie Smith" ?

I want to send Christmas cards to my friends in Address Book. But when I print the address labels up, I want something to appear other than the standard "firstname lastname" on the top line of the label.
Can I create a custom field, like a salutation field, so that when that particular label is printed, instead of showing "Rob Smith" on the first line it would show:
"Rob & Julie Smith"
Does this make sense?

nevermind.

Creating a new field in assignment block through EEWB

Hi,
I need to create a new field in an Master data --> Listings --> Listing items/Products assignment block. I do not have option to use AET (using CRM 7.0) for this assignment block. I think I should use EEWB only.
Now, how can I find the right EEW Bus. object and the extension type to create new fields.
Please suggest.
Thanks,
Praveen

CRMCMP_LST/CondRecDispView.
Here I would like to create new field in the header area. I found that the structure used by the BOL entity, in this view, cannot be enhanced. This new field will be defaulted according to the user information everytime the user creates a new Listing.
Also, this field should be available in display view.
Please suggest.
Thanks,
Praveen

Created on (AEDAT) field is empty in EKKN

Similar Messages

Maybe you are looking for