Creating a 'macro' to adjust system settings...
I recently bought a Wacom Bamboo tablet, and have been messing around with the settings for optimal preferences. I prefer to have the screen restricted to the same size of the tablet whenever I'm doing my artwork, however I would like to go back to full screen mode when just doing everyday stuff with the tablet... Going back and forth into settings and making this adjustment will prove tedious. Is there a way to make an Automator or Apple Script shortcut to do this for me?
Thanks,
~Dill
I'll check out ikey, perhaps that's exactly what I'm looking for.
Here a little more info on iKey.
Examples:
I have the common programs that I use assigned to function keys. I have F4 assigned to Firefox. When I want to start FireFox, I press F4. When I want to switch to firefox, I press F4! Starting & switching to an application in Mac OS are the same thing in Mac OS.
Here is an example of to assign volumn control to a function key.
http://discussions.apple.com/message.jspa?messageID=10361085#10361085
Here is my script for listing my application folder. I have it assigned to function-key 6.
tell application "Finder"
open folder "Applications" of startup disk
select Finder window 1
set bounds of Finder window 1 to {-3, 44, 691, 545}
--set position of Finder window 1 to {33, 44}
set position of Finder window 1 to {60, 45}
activate
end tell
The second portion of this script was generated in the script editor record mode. After I recorded the script and did some editing, I copy the script to ikey/youpi key.
Full Key Codes
http://download.cnet.com/Full-Key-Codes/3000-2094_4-44175.html
I tempted to run automator and create a 'watch me do', but I had issues with it accessing the Bamboo system preference. Also, I wasn't too fond of sitting there watching it run the same process I could just do on my own. I want this function to just happen in the background.
Any key/mouse simulator is going to act just like you typing. iKey will act the same.
Not for the faint hearted...
open applescript editor.
see if the application has a scripting dictionary.
Robert
Message was edited by: rccharles
Similar Messages
-
On a Windows 7 computer I installed Firefox 9.0.1 and in my edit menu I have NO Preferences at the bottom, so there is no way to adjust any settings The edit menu opens up and I have undo, redo, cut, copy, paste,delete,select all, find....but NO Preferences at the bottom. This is a new laptop and nothing like skype is installed. The Firefox install is new today 1/6/12
Hi bruce,
What are you actually looking for? On Windows 7 your options will be under ''Tools > Options''. If you have the ''Firefox'' menu, you can hit ''Alt'' to temporarily enable the menu bar.
Your System details say Linux. Your say you are on Windows 7 though, correct? -
Is there a way to default scratch disks in system settings?
This might be elementary, but is there a way to default the scratch disks in system settings to match the project that you are currently working on?
What I mean is when I switch from project to project my auto save files get all jumbled up.. then when I really needed to retrieve one I had to search them out in folders from different projects.... it was a mess
So as I have it now.. I have to open a project then go to system settings and switch all my scratch disks accordingly.. but I always forget to do this not to mention that it is a pain in the *** and time consuming..
Thanks in advance if you can helpI just create one master file for all my FCP projects inside it there is the autosave folder, thumbnail and waveforme cache folders.. then inside each one FCP automatically creates a seperate folder with your projects name.. so you can find them easily
-
Ibase/Component issue while creating a message from satillite system
Hi experts,
we have implemented the service desk functionality in solution manager system.
User is able to create message in solution manager directly.
While creating message from a satellite system IBASE/component fields are filled with incorrect values.
Because of this user unable to create message from satillite system.
Has someone any ideas where we do some settings to get correct Ibase/Component values while creating message from satillite system?
Thank you in advance,
BabuHi Babu,
For Creating messages in SOLMAN make sure that in T code SM30 under the table BCOS_CUST data is maitained
OSS_MSG W NONE CUST620 1.0
First your should make your solman ready for posting issues within.
Then connect it to ECC systems and try posting issues there.
Do not user Tcode NOTIF_CREATE for posting issues always use HELP- Create Support message.
Thanks
Nand -
SharePoint Reporting Services Integration - System Settings Page Issue
Hi All,
A client of mine has setup Reporting Services (SQL Server 2012 SP1) integration on a SharePoint 2010 environment and this has been working fine for a while now. This includes viewing SSRS reports and also creating PowerView reports from the SharePoint interface.
The only issue that we have is when we browse to the SQL Reporting Services service application via SharePoint Central Administration and select 'System Settings' we receive an error and can't configure any of the settings located on this page.
Looking at the ULS logs I can see the following error is raised:
System.NullReferenceException: Object reference not set to an instance of an object. at Microsoft.ReportingServices.SharePoint.SharedService.UI.ReportingServicesSystemSettings.InitStrings() at Microsoft.ReportingServices.SharePoint.SharedService.UI.ReportingServicesSystemSettings.OnInit(EventArgs
e) at System.Web.UI.Control.InitRecursive(Control namingContainer) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
43aaadcd-fc67-420e-a30f-2e174f151084
I removed the existing service application and uninstalled the SharePoint Services (using Install-SPRSService). I then reconfigured the RS services and created a new service application but the error is still raised. All other pages under the service application
can be loaded. We also tried setting the reporting services diagnostic logs to verbose but couldn't see any further information.
Has anybody seen this before? I'm thinking that perhaps some of the configuration settings for this page actually carry a null value when it should be configured with something. Does anybody know where these settings are saved?
Cheers,
TomJust thought I'd provide an update, we ended up resolving this, problem was related to an incorrect ID one one of the fields in ReportingServicesSystemSettings.aspx.
Updating this to the correct ID resolved the issue. Weird thing was that the file was incorrect on more than one server, only had to obviously update it on the CA server though. After this the System Settings page opened without any problems. -
Good day!
On the ultrabook Asus (System Settings: WIN 8.1 64-bit, Core I5-3317U CPU @ 1.70 Ghz, Memory 4 Gb), set Adobe Acrobat XI Pro 11.0.09
When you convert to any format via SaveAs in WORD, EXCEL, or via the Export file in ... throws the error "Unable to process the document in the module Save As. File not created"Hi,
Was it working fine for you before?
Is it with some specific documents?
Are you able to convert the word/excel files to pdf?
Regards,
Rave -
Good day!
On the ultrabook Asus (System Settings: WIN 8.1 64-bit, Core I5-3317U CPU @ 1.70 Ghz, Memory 4 Gb), set Adobe Acrobat XI Pro 11.0.09
When you convert to any format via SaveAs in WORD, EXCEL, or via the Export file in ... throws the error "Unable to process the document in the module Save As. File not created"This happens with any file .
Send a file with the screen errors and system data . Also send a couple of files PDF.
Translates only txt format.
Acrobat установлен: C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\Acrobat.exe
Версия: 11.0.9.29
Дата создания: 2014/09/12
Время создания: 13:43:46
Браузер по умолчанию:
Версия BIOS: _ASUS_ - 1072009
Версия ОС: 6.2.9200
Всего виртуальной памяти: 4194176 KB
Всего физической памяти: 4077252 KB
Графическая плата: Intel(R) HD Graphics 4000
Версия: 10.18.10.3412
Отметить: Не поддерживается
Доступная виртуальная память: 3638168 KB
Доступная физическая память: 1689940 KB
Имя пользователя: Vazgen
Имя системы: VAZGENTAICHI
Монитор:
Название: Intel(R) HD Graphics 4000
Разрешение: 1920 x 1080 x 60
Бит на пиксел: 32
Название ОС: Microsoft Windows Vista
Папка Windows: C:\WINDOWS
Папка для временных файлов: C:\Users\Vazgen\AppData\Local\Temp\
Почтовая программа по умолчанию: Microsoft Outlook
mapi32.dll
Версия: 1.0.2536.0 (winblue_rtm.130821-1623)
Производитель ОС: Microsoft Corporation
Процессор: Intel64 Family 6 Model 58 Stepping 9 GenuineIntel ~1696 Mhz
Сведения о Windows:
Планшетный ПК: Да
Начальная версия: Нет
Media Center Edition: Нет
Медленный компьютер: Нет
Сведения о сеансе:
Тип загрузки: Обычный
Завершение работы: Нет
Сеть: Доступно
Внутри Citrix: Нет
Внутри VMWare: Нет
Удаленный сеанс: Нет
Удаленное управление: Нет
Использование JAWS: Нет
Использование Windows-Eyes: Нет
Использование NVDA: Нет
Сведения об Acrobat:
Изолирование программной среды: Отключить
Связанная программа для чтения: Нет
Multi-Reader с поддержкой Desktop: Отключить
Сведения об отображении:
Ширина экрана: 1920
Высота экрана: 1080
Число мониторов: 2
Число кнопок мыши: 2
Мышь с колесом прокрутки: Нет
С маркером Windows: Нет
Двухбайтовая кодировка: Нет
С редактором метода ввода: Да
В программе для чтения с экрана: Нет
Сведения об учетной записи:
Права пользователя: Администратор
Управление учетной записью пользователя: Ограниченное
Целостность процесса: Не определено
Тип профиля: Отсутствует
Установленные приложения:
Версия Office: Office 2013 32-bit
Файл подкачки: 4194303 KB
Часовой пояс: Московское время (зима)
Язык: Русский (Россия)
C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\plug_ins\Accessibility.api
Версия: 11.0.9.29
Дата создания: 2014/09/12
Время создания: 13:44:20
C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\plug_ins\Annots.api
Версия: 11.0.9.29
Дата создания: 2014/09/12
Время создания: 13:44:22
C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\plug_ins\IA32.api
Версия: 11.0.9.29
Дата создания: 2014/09/12
Время создания: 13:44:18
C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\plug_ins\PaperCapture.api
Версия: 11.0.9.29
Дата создания: 2014/09/12
Время создания: 13:43:36
C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\plug_ins\SaveAsRTF.api
Версия: 11.0.9.29
Дата создания: 2014/09/12
Время создания: 13:44:20
C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\plug_ins\SendMail.api
Версия: 11.0.9.29
Дата создания: 2014/09/12
Время создания: 13:44:20
C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\plug_ins\Updater.api
Версия: 11.0.9.29
Дата создания: 2014/09/12
Время создания: 13:44:22 -
A few weeks ago, i wanted to change my background via system settings. Suddenly the systems settings stopped and i wasnt able to close it or to come back to the main menu of the system settings. all i could do was to close it via cmd+alt+esc.
Now i got the problem, that everytime i want to open the system settings i am directed to the "background" but i cant go back to main menu because the program does not react.
Can someone help me please????If the re-boot suggested by Shootist007 doesn't work then ensure that System Preferences is closed. If I were you I'd go into Activity Monitor and check that the process isn't running even though you can't see the window. Next, drag the following file to the trash:
<home>/Library/Caches/com.apple.preferencepanes.cache
Do not delete it from the trash just yet, just in case you need to restore it. Now restart System Preferences, it will re-create the cache file and hopefully sort your problem. -
In System settings the Audio Capture is grayed out. Is it supposed to be grayed out and why?
Thank youIf you're capturing via Firewire, the audio is non-selectable because it transfers with the video as a single data stream. If you're using a capture card, please let us know which one ... there may be settings on the card's drivers that needs adjusting.
-DH -
An Inquiry Document is to be created in ECC from CRM system
Hi Friends,
An Inquiry Document is to be created in ECC when an project opportunity is created and the phase of the opportunity is Quotation Stage in CRM system using Tcode CRMD_ORDER.
So the scenario is when i create project opportunity and save it in the CRM,while saving at the same time i need to create Inquiry document in ECC system using BAPI "BAPI_INQUIRY_CREATEFROMDATA".
So can any one suggest me where should i need to call the BAPI , what parameters i need to pass ,
It would be helpful for me if any one help me out.
Regards
Raghavendra Prasad
Message was edited by:
Raghavendra PrasadI actually followed your blog and developed a sample application
How to create SAPUI5 application consuming Gateway service with the help of SAP NW Gateway Plug-in for Eclipse
Can you please explain below :
1) I was getting an UI like this , but in example you provide you achieved a table like UI. May i know the reason behind this?
How can i achieve the UI as in blog?
my result
example in blog result
2) The result i achieved is not responsive. When i change the size of my browser the UI design does nt adjust itself.
How to make this responsive? -
Hi,
Could some one please explain me on the important steps/settings to do for accessing XI system at remote from our laptop ?
Would be better if someone provides in a step-by-step process?
Regards,
Alex.Hi Alex
R u able to connect to XI server. Can u please check this first???
There are standard communication ports that are created during installation. The system uses an internal port calculation to determine the required ports, which helps to prevent port conflicts. The system uses an internal port_index and system number for the calculation. For example, 50000100*snrport_index.
Example results:
Admin Tool: port 50004
Telnet: port 50008
Ports used by the J2EE engine can also be configured individually using the Visual Administrator, which is a tool that can be used to administer the Java instance. Another component of the J2EE Engine is the Software Deployment Manager (SDM), which runs on a Java instance and must be configured to manage the Deployment of Java2EE applications.
As the system offers both ABAP and J2EE, each instance must contain an Internet Communication Manager (ICM) that receives the web request and distributes the request appropriately. The operation of the J2EE Engine also requires that the following services are configured in order to active the Java instance in the Web AS:
Regards
Abhishek Mahajan -
Error: The system settings do not allow any changes
Hi experts !!,
I had installed SAP NetWeaver 2004s Sneak Preview-ABAP
I am able to create database table using tcode: <b>SE11</b>
but I get an error when I tried to create table entries
<b>Error:</b>
The system settings do not allow any changes
Message no M0421
<u><b>Diagnosis</b></u>
The system settings (SE06 and SCC4) are such that you cannot make any changes to this table in this client
Kindly help me to fix this issue !!
Thanks,
Prembabu RHi,
I had modified <b>Changes and Transports for Client-Specific Objects</b>
-> <i>Automatic recording of changes (Option-selected)</i>
Now I am able to add new entries to tables.
Thanks for providing valuable information...
~Prembabu -
HOWTO: Fix the system settings crash in KDEmod
This crash is pretty frequent on fresh installations of the KDEmod, and while searching for info on lots of places I found the solution on the chakra forums.
This howto is very short and easy to follow, and I post it on newbie corner forum because I dont know where to post it (the wiki????)
If your KDEmod installation crashes when you open:
1)system settings--> package management
2)shaman--> tools --> settings --> aqpm databases configuration
All you have to do is simple, this problem happens because when you generated the best mirrors for your location using rankmirrors (you did? right?) Rankmirrors appends a comment saying:
# Server list generated by rankmirrors on 2009-09-04
Apparently, even if the word "Server" is commented out, this causes the applications to crash (yes, very weird), so the only thing you have to do is edit the mirrorlist and erase that word, then save and close.
So go ahead, open a terminal and do:
sudo kate /etc/pacman.d/mirrorlist
NOTE: if you want to do this via a terminal editor, just replace the kate part with "nano" or your favorite text editor.
and change the line
# Server list generated by rankmirrors on 2009-09-04
to
# List generated by rankmirrors on 2009-09-04
Save, close and enjoy
Sources:
http://chakra-project.org/bbs/viewtopic.php?id=1237
https://bugs.kde.org/show_bug.cgi?id=217018
http://chakra-project.org/bugs/index.ph … task_id=86
Hope it helped:Dthats why I asked, going to ass this to the wiki then
where on the wiki? its VERY big, and I dont want to mess up anything. Should I just create a new article?
thanks for your reply
Last edited by 655321 (2009-12-15 10:04:02) -
When I open Firefox, it requires time to load pages. When I go in the networking, I activate "No Proxy" from "Use system settings", and each time I reopen, the System Settings is back, and the page load slow.
Hello serman77, check '''IF''' you have in your [http://kb.mozillazine.org/Profile_folder_-_Firefox#Windows profile folder] a [http://kb.mozillazine.org/User.js_file User.js file].
The user.js file does not exist by default. If you create the file, forget it, '''if you have not create the file then delete the User.js file''', to see if the problem goes away (some programs create and write in the file also).
'''If you have not a user.js file''' then see : [http://kb.mozillazine.org/Preferences_not_saved#Corrupt_or_damaged_prefs.js_file Corrupt or damaged prefs.js file]
thank you -
Send PO from one system and create a SO in another system
Hello Gurus
ii am learning ALE IDOC and would like to do a complete hands on practice. I have been doing some basic scenarios and so far i am progressing well.
What i am planning to do:
Now i would like to do an end to end scenairo of sending a PO idoc from one system and this should create a SO in the other system.
Steps i am planning to do:
1). Configure the sending system for a outbound PO idoc
2). Configure the receiving system for a Inbound SO idoc
3). Maintain VOE2(EDPAR) and VOE4(EDSDC) tables for partner information and organization information respectively.
Questions:
1). Am i missing any steps?
2). I am confused on what to maintain in VOE2 and VOE4. Which information of PO should i maintin in VOE2 and VOE4 in the receiving system?
~SureshHi Suresh,
this might be of some help.
ALE IDOC
Sending System(Outbound ALE Process)
Tcode SALE - for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 - Create Model View
Tcode BD82 - Generate partner Profiles & Create Ports
Tcode BD64 - Distribute the Model view
Message Type MATMAS
Tcode BD10 - Send Material Data
Tcode WE05 - Idoc List for watching any Errors
Receiving System(Inbound ALE )
Tcode SALE - for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 - Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 - Idoc List for inbound status codes
ALE IDOC Steps
Sending System(Outbound ALE Process)
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 - Create Model View
Tcode BD82 - Generate partner Profiles & Create Ports
Tcode BD64 - Distribute the Model view
This is Receiving system Settings
Receiving System(Inbound ALE )
Tcode SALE - for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 - Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 - Idoc List for inbound status codes
Message Type MATMAS
Tcode BD10 - Send Material Data
Tcode WE05 - Idoc List for watching any Errors
1)a Goto Tcode SALE
Click on Sending & Receiving Systems-->Select Logical Systems
Here Define Logical Systems---> Click on Execute Button
go for new entries
1) System Name : ERP000
Description : Sending System
2) System Name : ERP800
Description : Receiving System
press Enter & Save
it will ask Request
if you want new request create new Request orpress continue for transfering the objects
B) goto Tcode SALE
Select Assign Client to Logical Systems-->Execute
000--> Double click on this
Give the following Information
Client : ERP 000
City :
Logical System
Currency
Client role
Save this Data
Step 2) For RFC Creation
Goto Tcode SM59-->Select R/3 Connects
Click on Create Button
RFC Destination Name should be same as partner's logical system name and case sensitive to create the ports automatically while generating the partner profiles
give the information for required fields
RFC Destination : ERP800
Connection type: 3
Description
Target Host : ERP000
System No:000
lan : EN
Client : 800
User : Login User Name
Password:
save this & Test it & RemortLogin
3)
Goto Tcode BD64 -- click on Change mode button
click on create moduleview
short text : xxxxxxxxxxxxxx
Technical Neme : MODEL_ALV
save this & Press ok
select your just created modelview Name :'MODEL_ALV'.
goto add message type
Model Name : MODEL_ALV
sender : ERP000
Receiver : ERP800
Message type :MATMAS
save & Press Enter
4) Goto Tcode BD82
Give Model View : MODEL_ALV
Partner system : ERP800
execute this by press F8 Button
it will gives you sending system port No :A000000015(Like)
5) Goto Tcode BD64
seelct the modelview
goto >edit>modelview-->distribute
press ok & Press enter
6)goto Tcode : BD10 for Material sending
Material : mat_001
Message Type : MATMAS
Logical System : ERP800
and Execute
7)goto Tcode : BD11 for Material Receiving
Material : mat_001
Message Type : MATMAS
and Execute --> 1 request idoc created for message type Matmas
press enter
Here Master Idoc set for Messge type MATMAS-->press Enter
1 Communication Idoc generated for Message Type
this is your IDOC
Change Pointers
I know how to change the description of a material using ALE Change Pointers.
I will give the following few steps
1) Tcode BD61---> check the change pointers activated check box
save and goback.
2) Tcode BD50---> check the MATMAS check box save and comeback.
3) Tcode BD51---> goto IDOC_INPUT_MATMAS01 select the checkbox save and comeback.
4) Tcode BD52---> give message type : matmas press ok button.
select all what ever you want and delete remaining fields.
save & come back.
5) 5) go to Tcode MM02 select one material and try to change the description and save it
it will effects the target systems material desciption will also changes
6) goto Tcode SE38 give program Name is : RBDMIDOC and Execute
give Message type : MATMAS and Executte
ALE/IDOC Status Codes/Messages
01 Error --> Idoc Added
30 Error --> Idoc ready for dispatch(ALE Service)
then goto SE38 --> Execute the Program RBDMIDOC
29 Error --> ALE Service Layer
then goto SE38 --> Execute the Program RSEOUT00
03 Error --> Data Passed to Port ok
then goto SE38 --> Execute the Program RBDMOIND
12 Error --> Dispatch ok
Inbound Status Codes
50 Error --> It will go for ALE Service Layer
56 Error --> Idoc with Errors added
51 Error --> Application Document not posted
65 Error --> Error in ALE Service Layer
for 51 or 56 Errors do the following steps
goto WE19 > give the IDOC Number and Execute>
Press on Inbound function Module
for 65 Error --> goto SE38 --> Execute the Program RBDAPP01 then your getting 51 Error
kindly reward if helpful.
cheers,
Hema.
Maybe you are looking for
-
How can i sync my old playlist to my new iPod shuffle?
How can I sync my old playlist to my new iPod shuffle? Everytime I try to sync it I get the little pop up box that asks if I want to transfer and delete what new songs I have already downloaded.....i know it has something to do with sharing music li
-
Upgraded to OS X 10.7.3 - Office 2011 / Excel quits unexpectedly
Upgraded to OS X 10.7.3 - Office 2011 / Excel quits unexpectedly All parts of Office 2011 were working perfectly prior to the upgade to Lion - Have followed the tips on removing the Excel plist file but this doesnt work. Has anyone had this problem a
-
We have roughly 80 iPhones deployed all tied to Exchange 2003. These are mostly iPhone 4 and about 10 iPhone 4S units. We have one iPhone 4S which is problematic. It is running IOS 5.0.1 (as most of them are) and opens e-mail very slowly. By open I d
-
[solved] kernel configuration for clarkdale server
Update: I guess since the arch kernel config works there's really nothing to improve. Hey everyone, i'm about to compile a kernel for a server with intel clarkdale hardware, intel i3-530. Up to now i only compiled kernels for my consumer laptop. 1) I
-
How do I organize or sort nokia web browser's book...
How do I organize or sort nokia web browser's bookmarks? There are quite many bookmarked pages and scrolling through them is a pain, because they are sorted by oldest to newest. How bookmarks can be sorted alphabetically? Thanks