Creating a new class using a template class
I am very new to Java.
I need to make a new class by using a template class that was given to us.
I go to File / New / Class but cannot find how to select a template class to create a new class.
Thanks,
gs
gs2010 wrote:
I am very new to Java.
I need to make a new class by using a template class that was given to us.
I go to File / New / Class but cannot find how to select a template class to create a new class.
Thanks,
gsYou need to be much more specific as to what you are trying to do.
What is a "template class"?
How are you trying to "go to" and "select" the template?
Etc.
Similar Messages
-
How to create a new object for a particular class?
Hi,
Can anybody please tell the steps for creating a new object for a particular class.
Thanks,
SreejaDeclare the object as TYPE REF TO the class and use the CREATE OBJECT statement to create an object.
DATA <obj_name> TYPE REF TO <class_name>.
CREATE OBJECT <obj_name>.
Please mark points if the solution was useful.
Regards,
Manoj -
When I create a new cube using another cube as template which datasource i
Hi,,
When I create a new cube using another cube as template(copy) which datasource is assigned to the new cube, why because am getting all the fields which are there in copied cube even though I used only required fields.why this is occuring?
Thanx in advance,
RaviHi,
Usually, when you copy the cube only data model is copied. means all KF and CHAR, NAV CHAR.
May be after copying you can reassign (CHARS) once again in the New cube as per your requirement.
When you create the update rules, there you can assign the Infosource or original cube as datasource.
may help...
Vis -
How can I create a new label using Pages and Avery Labels products?
How can I create a new label using Avery LAbels and PAges on an imac?
Contacts prints to Avery labels.
Otherwise just open the appropriate Word template from Avery's website, in Pages.
Peter -
Creating a new domain using WLST
Hi,
I am trying to write a WLST script to create a new domain without using an existing template. (Similar to the first option of "Generate a domain configured automatically to support the following BEA products" option when using the domain configuration wizrd). I found the createDomain command but am not able to see an option to create a domain without using a template. Does anyone know if I can create a domain without using a template? Here is the command and its syntax.
createDomain(domainTemplate, domainDir, user, password)
Can I skip the domainTemplate section to create a new domain without basing it on an existing one?
Thanks.You might be able to use configToScript but you would have to be connected.
<siva01> wrote in message news:[email protected]..
Hi,
I am trying to write a WLST script to create a new domain without using an
existing template. (Similar to the first option of "Generate a domain
configured automatically to support the following BEA products" option when
using the domain configuration wizrd). I found the createDomain command but
am not able to see an option to create a domain without using a template.
Does anyone know if I can create a domain without using a template? Here is
the command and its syntax.
createDomain(domainTemplate, domainDir, user, password)
Can I skip the domainTemplate section to create a new domain without basing
it on an existing one?
Thanks. -
Creating a new document using XQuery
Hello everyone,
I wondered if there was a way to create a new document using XQuery. What I am trying to do is to run a query on XML file and try to print the results in HTML for viewing purpose.
The HTML is spitted out on DOS prompt. Instead I wanted to write that HTML to a file on disk. Is this possible with the XQuery tools provided by Oracle?
Thanks in advance for all the help
KFolks,
Kinda answering to my question. Just send the DOS output to some file. Pretty Simple huh!
Thankyou anyways
K -
Creating a New Layer Using Icons in Adjustment Palette
When creating a new layer using the icons in the adjustments palette and holding ALT in CS5 a dialog box would appear before creating the new layer. At this point you could rename the layer change the blending mode etc.
In CS6 I do not get the dialog box to appear the new layer is just created. I've tried to reset my preference twice and this has not help. Any ideas?JJMack wrote:
Your memory has failed
On the contrary, your memory may have failed.
ACJ81 is correct (at least as far as Ps on OS X is concerned) and the problem was mentioned in the forum not too long ago. In CS5, Alt-clicking an icon in Adjustments panel does cause a New Layer dialog to pop open and the dialog fails to appear in CS6.
In CS6 and CS5, the dialog will appear if you pick an Adj Lyr from the Layer > New Adjustment Layer submenu, both with or without Alt modifier. (That lack of control over the appearance of an optional dialog when picking from a menu is an inconsistency in the interface.)
In CS6 and CS5, the dialog will appear if you Alt-click the black and white circle at bottom of Layers panel then pick an Adj Lyr from the menu, as Noel said. -
I have Pages 09 and I have created a business card using the template but can't figure out how to duplicate it to the other 9 spaces on the page. I am and sure I am going to look daft coz its only the click of a button but I can't work it out Thanks
I do the following: Hold down the command key and highlight all the items to be reproduced. Then hold down option and drag the items from the first to each subsequent card.
-
I want to send some photos from Firefox, when I tried it said I need to create a new profile, use mail icon in control panel. I went to control panel and do not know what to do.'''bold text'''
As all of the msuic came from your computer in the first place it should still be there. Is it not?
EVERYTHING on your ipod should also be on your computer and should be included in your regular backup copy of your computer.
Make sure that everything is on your computer. You can transfer itunes purchases from the ipod. Without syncing: File>Transfer Purchases.
When everything is on your computer, then it can be synced back to the ipod after updating. -
How to create a new material using a BAPI?
Dear friends,
How to create a new material using a BAPI? I mean without knowing the material no., how to just create a new one using function modules(BAPI)?
Thanks a lot!Dear,
New material can be created by using a BAPI_MATERIAL_SAVEDATA.
More over their are lots of threads available on SDN on the question you raised so kindly search the SDN before posting any thread .
Cheers
fareed -
How to create a new component using SPICE?
People, I don't know how to create a new component using SPICE.
I know that it's possible to create a new component and use a SPICE code, but I don't know how to do this very well, and I need the TI ISO124 (Isolation Amplifier), and I have no idea on how to do that. Can somebody help me? I need to develop a layout.
Thank you!!Hi,
Here is a tutorial that explains in details how to create your own component in Multisim using a SPICE model.
Hope you find it helpful,
Mahmoud W
National Instruments -
Selecting an object fails when creating a new dashboard using the 'New Dashboard and Widget Wizard'
Hi,
I am using SCOM 2012 SP1
I have recently been experiencing an issue when trying to create a new dashboard using the wizard. I get to the step where you select a group or object to add to the Scope and Counters section. When I try to search for a particular object such as a
port or interface it times out and returns an error. The error is shown below:
Please provide the following information to the support engineer if you have to contact Microsoft Help and Support :
Microsoft.EnterpriseManagement.Presentation.DataAccess.DataAccessDataNotFoundException: Exception reading objects ---> Microsoft.EnterpriseManagement.Common.UnknownDatabaseException: The query processor ran out of internal resources and could not
produce a query plan. This is a rare event and only expected for extremely complex queries or queries that reference a very large number of tables or partitions. Please simplify the query. If you believe you have received this message in error, contact Customer
Support Services for more information.
at Microsoft.EnterpriseManagement.Common.Internal.ServiceProxy.HandleFault(String methodName, Message message)
at Microsoft.EnterpriseManagement.Common.Internal.EntityObjectsServiceProxy.GetManagedEntitiesByManagedEntityTypesAndCriteriaWithInstanceQueryOptions(IList`1 managedEntityTypeIds, IList`1 managedEntityBaseTypeIds, IList`1 criterias, String
languageCode, InstanceQueryOptions instanceQueryOptions)
at Microsoft.EnterpriseManagement.InstancesManagement.GetObjectsReaderInternal[T](ICollection`1 criteriaCollection, ObjectQueryOptions queryOptions)
at Microsoft.EnterpriseManagement.Management.DataProviders.ManagedEntityProvider.GetManagedEntitiesByClass(ICollection`1 baseTypeNames, String criteriaString, List`1 valueDefinitions, List`1 sortValueDefinitions, Int32 maxEntities, String typePropertyName,
String typeWithIconPropertyName, Boolean propertyCollectionRequested)
--- End of inner exception stack trace ---
at Microsoft.EnterpriseManagement.Presentation.DataAccess.DataProviderCommandMethodInvoker.Invoke()
at Microsoft.EnterpriseManagement.Monitoring.DataProviders.RetryCommandExecutionStrategy.Invoke(IDataProviderCommandMethodInvoker invoker)
at Microsoft.EnterpriseManagement.Presentation.DataAccess.DataProviderCommandMethod.Invoke(CoreDataGateway gateWay, DataCommand command)
at Microsoft.EnterpriseManagement.Presentation.DataAccess.CoreDataGateway.ExecuteInternal[TResult](DataCommand command)
at Microsoft.EnterpriseManagement.Presentation.DataAccess.CoreDataGateway.<ExecuteAsync>b__0[TResult](<>f__AnonymousType0`1 data)
It appears to be complaining about internal resources, but we have not experienced this issue before and both the management and SQL servers have plenty of resource. The databases are held on a seperate dedicated sql server and I have noticed that when I
try to search for the object, the sqlservr.exe process immediately consumes 50% CPU while the query is running. As soon as it ends (errors) the sqlservr process drops back to a reasonable number.
No changes have been made to either the management server or sql server. We were able to create dashboards one day, but then recieved this error the next.
Has anyone else seen this issue? or can anyone explain what is happening?
Many thanksHi,
Asposted earlier,hadt he same problem
when creating a Dashboard widget type
State.
Ones olution I found for this was as follows:
When creating the State widget,the option
to specify the criterion I left blank
and finished the creation of the dashboard.
With that managed to solve the problem.Of course this
is not the solution, or the root cause
of the problem.
I will examine more about this issue, and sohave
the ultimate solution and why such behavior,I post
here.
thank you
Wilsterman Fernandes -
Creating a new database using an MDF file
My database saves as MDF. I want to know what are the steps to restore or create a new database using a MDF file? I tried to restore as usual but it shows an error. Please help.
An MDF file isn’t a backup file isn’t the main data file (or master data file depending on who you ask) hence the file extension MDF. You can attach the MDF to the database by right clicking on the databases folder in Enterprise Manager (SQL 2000) or Management
Studio (SQL 2005) then selecting all tasks and then Attach Database. When you do this you will get an error about the log file missing. This shouldn’t matter as SQL Server will simply create a new log file for you. This will only work if the SQL Server was
stopped when you copied the MDF file from the old SQL Server. If you copied the file while the SQL Server was running this file probably will not attach either and you will need to get a valid backup of the database.
Download help tool for sql database - SQL Server Restore Toolbox.
http://www.sqlserver.restoretools.com/
You can read up more on SQL Server here.
http://www.filerepairforum.com/forum/microsoft/microsoft-aa/sql-server/498-creating-a-new-database-using-an- mdf-file?_=1416149856104 -
Creating a new instance of a member class?
I'm writting a serialization library for a college project and I have a problem with deserializing an object which class contains a member class. A rough example:
class Outer{
class Member{
double d =0;
public Member member =new Member();
}Most basically I tried to get a new instance of the Member class in order to get the double field, change it's value, then use that new instance as a field of an object of the Outer class.
Field f = Outer.class.getDeclaredField("member");
f.setAccessible(true);
f.getClass().newInstance(); Both this and the Constructor method throw an exception:
Exception in thread "main" java.lang.InstantiationException: java.lang.reflect.Fieldpointing at the line with newInstance().
Is there anything I can do to create an object of a member class? And if not then taking into account that I have to deserialize the Outer object from an XML file what could be the alternative?The error message already gives you a hint that it's not class Outer.Member you're instantiating there (review the API docs)...
import java.lang.reflect.*;
public class Outer{
public static void main(final String[] args) {
final Field f = Outer.class.getDeclaredField("member");
f.setAccessible(true);
final Constructor ctor =
f.getType().getDeclaredConstructor(new Class[] { Outer.class });
final Object outer = new Outer();
final Object member = ctor.newInstance(new Object[] { outer });
// set member.d
f.set(outer, member);
class Member{
double d =0;
public Member member =new Member();
} -
hi, iam using maintain_bapi of class vmd_ei_api for bank details creation at the time of vendor creation. but im getting error: ' Invalid address:bank Country missing'.please suggest
* *** Bank details***************************************
DATA: lt_bankdetails TYPE TABLE OF cvis_ei_cvi_bankdetail,
ls_bankdetails TYPE cvis_ei_cvi_bankdetail.
ls_bankdetails-data_key-banks = 'DE'. "Bank Country
ls_bankdetails-data_key-bankl = 'BEBEDEBB'. "Bank Key..
ls_bankdetails-data_key-bankn = '3538174400' ."Bank account number.
ls_bankdetails-data-bvtyp = 'USA'.
ls_bankdetails-data-bkref = 'BEN'. "Reference details.
ls_bankdetails-datax-bvtyp = 'X'.
ls_bankdetails-datax-bkref = 'X'. "Reference details.
ls_bankdetails-task = 'I'.
ls_bankdetails-data-iban = 'DE24100200003538174400'.
ls_bankdetails-datax-iban = 'X'.
APPEND ls_bankdetails TO lt_bankdetails.
*CLEAR : ls_bankdetails.
* ls_bankdetails-datax-iban = 'X'.
* APPEND ls_bankdetails TO lt_bankdetails.
* Inserting bank details,,,,
ls_bank-bankdetails = lt_bankdetails[].
ls_bank-current_state = ''.
ls_vendors-central_data-bankdetail = ls_bank.
And second question how/which method to use from this class to update bank details latter. Is it possible after creating vendor with mandatory fields and then update bank details?Hi Abhijeet,
please check in transaction FI01, about your data consistencies. You can use this wiki help in terms of Address, it it found any useful facts for you
Address Checks - Business Address Services (BC-SRV-ADR) - SAP Library
Maybe you are looking for
-
Terms of Payment consideration in Price comparision of Quotations
Hi, While Price comparision of the Quotations submitted by vendor, can I take the Payment terms into consideration? If so how? I have given the terms of payment in the quotations but it is showing as an additional information only in price comparisio
-
Image size for widescreen TV's
For widescreen TV's what image size do I need 1280-720HD or 1920x1080HD to burn video?
-
Creating Interactive PDF w/Indd 5.5 - Form button popping up
I'm creating an interactive pdf with 5.5 and everytime a specific pdf opens a tab appears at the top that says: "Please fill out the following form. If you...." Does anyone know why this is popping up? and how to find the element in InDesign that is
-
Hi I want to transfer Video from an old Sony Camcorder Hi8 that uses a DV 4 Pin Firewire to a Macbook Pro Retina with Thunderport 2. I understand i would have to use a Firewire 400 to Firewire 800 cable connected to a Firewire to Thunderport Adaptor
-
Hi. I have an question about Archiving Billing Invoices. When our business is sending invoices to costumers we have discovered that there has been a period where these did not has been archived. We have tried to reprint but that shows the problem. Cu