Creating a program assistant

does anyone know how to take an animated flash character and
transform it into 1 of those annoying office assistant's that
program's like microsoft word uses?? i have the character already
drawn out and ready to be integrated into a piece of software that
the company i work for uses.
Any ideas would be greatly appreciated.
:D

Is this what you're looking for?
http://www.microsoft.com/msagent/default.asp
"Zaffer36" <[email protected]> wrote in
message
news:e9q28q$oj4$[email protected]..
> does anyone know how to take an animated flash character
and transform it
into
> 1 of those annoying office assistant's that program's
like microsoft word
> uses?? i have the character already drawn out and ready
to be integrated
into a
> piece of software that the company i work for uses.
>
> Any ideas would be greatly appreciated.
>
> :D
>

Similar Messages

How to Create another program instance in iphone from a COPY previous proj

Say I've created one program by starting Xcode afresh.
Now I want to create another program using the previous program as a base, I copy and paste the project folder and rename it, unfortunately, when I run the program, it replaces the previous program in my iPhone.
How do I tell xcode it's a new program ?
Message was edited by: Bracer-J

Thank you

Is it possible to create a program for embedded system

Is it possible to create a program for embedded system?

Yes. Many solutions.
1 = http://jcx.systronix.com/
2 = http://www.harbaum.org/till/nanovm/index.shtml (see links to Asuro)
And many more but I'm too lazy too look them for you ...
Dan

BootCamp won't load on first boot from USB created by Bootcamp Assistant

So I have created a bootable USB via the Bootcamp Assistant with the support files etc, formated a paritition to run off of. I also have tried formating through disk utility to no avail.
I have tried things like using a USB drive, using an external, un plugging all external devices from my mac while running the set up, and nothing I have found online so far has seemed to work.
Where the problem is, when I boot from the external drive or USB created by bootcamp assistant, it will literally just freeze on the first screen where I select the language and that stuff, not even a USB keyboard or mouse will help.
I have managed to get past that before, but then It wont let me format my hard drive correctly to install it
Any ideas?

Please post in the Boot Camp forum, thats where you will find the MS Windows and Boot Camp gurus. Note also it's Boot Camp, and not Bootcamp which is something you do when you enter the military.

Create a program, based on a report painter query

Hi!
I would like to create a program, which contains the same data, what I can get from a report, which is made by report painter in transaction GRR2. The given report is for checking the service orders.
This report has a key (order number) and additional columns, like material cost, personal cost, external service cost, money income, etc...
I would like to know, how can I identify the tables, columns and table entries, where these values come from?
How can I retrieve from the SAP, for example the material cost of the service orders?
And of course with the less hard-coding.
Thank you
Tamá

How to find the cost element to filter
- Ask your FI-CO team.
- Analyze the Customizing (IMG): "Materials Management", "Valuation and Account Assignment", "Account Determination" to find the cost element/account used for MM. go to "Account Determination Without Wizard", "Configure Automatic Postings"
- Look at table T030 which links Operation/Transaction key and Account, and filter KTOSL on Operation Group T030A-GRUP = 'RMK' for MM.
Ask also the CO team if they maintain a hierarchy of cost element that you could use in your report.
Also use SE30, when analysing the result you could find the way used by the generated program to spread the cost elements in column.
Regards

Create a program, based on a report painter query issue continues

Hi!
I would like to create a program, which contains the same data, what I can get from a report, which is made by report painter in transaction GRR2. The given report is for checking the service orders.
This report has a key (order number) and additional columns, like material cost, personal cost, external service cost, money income, etc...
I found the COSP table, which can be very useful. Unfortunately COSP table contains only the costart (KSTAR) and I don't know, which costarts can be attached to the material costs, which costarts to the services, which costarts belong to the money income, etc...
Could you please tell me, where can I find this assignment?
Thank you
Tamá

Solved, here:
Create a program, based on a report painter query

The FInal Step, i have created a program to all my specifications and i am now ready to connect the hardware

I have created a program to all my specifications and i am now ready to connect the hardware.
My program was created to automate the cleaning process of an atmostpheric chamber. It controls two valves based on the pressure readings and time intervals. When creating this program i figured that if a could make a boolean turn on or off based on the pressure readings then it would be no problem somehow wiring it to send a signal to the hardware. I have reached that point and don't know how to proceed. I was told that the first step is to figure out what kind of Card is being interfaced with the program.
I have read up on this subject and it seems like there is many ways to do it.
All sugestions will be greatly appreciated

I'm not sure how you can create the program without knowing what hardware you're going to be using. But... What have you read up on? You will need to select your data acquisition hardware. What kind of signals do you have? What kind of transducers do you have? What kind of actuators do you have? You may want to start with:
Introduction to Data Acquisition
Digital Voltage Measurement Fundamentals
Complete Data Acquisition Tutorial
EDIT: Re-reading your post and seeing Waldemar's response: Do you actually already have a card installed?
Message Edited by smercurio_fc on 07-29-2008 02:25 PM

Function Module to create a program in SE38

Hi,
I have to create an ABAP program dynamically. The program name(to be created) will be provided in the selection screen and the logic of the program will be available in an internal table & also in a local PC file. Is there any Function Module available in SAP to create the program dynamically by using the code which is available in the internal table. The program should be saved in the Local Object.
Can someone help me on this issue. Thanks in advance.
Best Regards,
Paddu.

Hello Paddu.
This code fullfills your requirement. Only has the resctriction that all the file names must be in uppercase.
REPORT zcreate_report.
* TYPES
TYPES: BEGIN OF ty_code,
         line TYPE char255,
       END OF ty_code.
* CLASSES
CLASS cl_gui_frontend_services DEFINITION LOAD.
* INTERNAL TABLES
DATA: data_tab TYPE STANDARD TABLE OF file_info.
DATA: wa TYPE file_info.
DATA: ti_code TYPE STANDARD TABLE OF ty_code.
* VARIABLES
DATA: name TYPE PROGNAME.
DATA: count TYPE i.
DATA: bytecount TYPE i.
DATA: filename TYPE string.
* SELECTION-SCREEN
PARAMETERS: p_dir TYPE string OBLIGATORY DEFAULT 'C:\test\'.
*** START-OF-SELECTION
START-OF-SELECTION.
CLEAR count.
CALL METHOD cl_gui_frontend_services=>directory_list_files
    EXPORTING
      directory        = p_dir
      files_only       = 'X'
      directories_only = space
    CHANGING
      file_table       = data_tab
      count            = count.
IF count EQ 0.
    MESSAGE i000(zsd1) WITH 'No files found'.
    EXIT.
ENDIF.
LOOP AT data_tab INTO wa.
    CALL FUNCTION 'AIPC_CONVERT_TO_UPPERCASE'
      EXPORTING
        i_input = wa-filename
      IMPORTING
        e_output = wa-filename.
    CONCATENATE p_dir wa-filename INTO filename.
    CALL FUNCTION 'GUI_UPLOAD'
      EXPORTING
        filename                = filename
        filetype                = 'ASC'
      IMPORTING
        filelength              = bytecount
      TABLES
        data_tab                = ti_code
      EXCEPTIONS
        file_open_error         = 1
        file_read_error         = 2
        no_batch                = 3
        gui_refuse_filetransfer = 4
        invalid_type            = 5
        no_authority            = 6
        unknown_error           = 7
        bad_data_format         = 8
        header_not_allowed      = 9
        separator_not_allowed   = 10
        header_too_long         = 11
        unknown_dp_error        = 12
        access_denied           = 13
        dp_out_of_memory        = 14
        disk_full               = 15
        dp_timeout              = 16
        OTHERS                  = 17.
    CHECK sy-subrc EQ 0.
    READ TABLE ti_code TRANSPORTING NO FIELDS INDEX 1.
    CHECK sy-subrc EQ 0.
    name = wa-filename.
    INSERT REPORT name FROM ti_code.
ENDLOOP.
Regards.
Valter Oliveira.

Is pages the best app for creating wedding programs? or would you recommend something else?, is pages the best app for creating wedding programs? or would you recommend something else?

Is pages the best app for creating wedding programs, or would you reccomend something free or cheaper?

As the question is asked three times, I guess that you wish to marry three times.
From my point of view, the best app to do this or that is the one with which we are comfortable.
Every Word processor may be used to achieve your goal.
Yvan KOENIG (VALLAURIS, France) vendredi 20 janvier 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My Box account is : http://www.box.com/s/00qnssoyeq2xvc22ra4k
My iDisk is : http://public.me.com/koenigyvan

Transferring Itunes Files from user created by migration assistant to another user

Hello,
I was wondering how to transfer the entire itunes library from the user file created by migration assistant to my current user file on my mac. I have noticed on the file folder created by migration assistant that the itunes play counts and ratings are all the same as my old pc, but now I want to bring all of that to my new user account on this mac. I really need to learn how to do this ASAP! Help would be greatly appreciated!
also - the old user files cant be accessed by my current account (there is a red icon on the lower right of all the files)

You have three choices:
1. Keep both accounts. Enable fast user switching. Use the original account only for administrative tasks, and demote the new account to "Standard User" status in the Users & Groups preference pane. This is the best choice from the standpoint of security.
2. Delete the new account. Create a temporary one with a different name and allow it to administer the computer. Log into the temporary account and run Migration Assistant again, this time selecting only the user you want to transfer. If it has the same name as an existing user, you'll have the option to overwrite that user. Confirm. Log out of the temporary account and delete it.
3. Erase the startup volume in Recovery mode and start over. Do the transfer the right way, in Setup Assistant, not Migration Assistant. You will have to download about 5 GB of data and it may take several hours.

Who created which program and when?

Hi all,
Who created which program and when?
How can I get this info, thanks.
Deniz.

Hi Thomas,
Yep True....
Very True...
Thanks for sharing your knowledge...
But If User wants something else in selection screen then what is available in standard se90 or se84 or any other TCODE or Program....
Again There can be many solution for one problem... And I provided one of the solution...
If user wants program type in seleciton screen
like
Created DATE
Created By
Modified DATE
Modified By
If user wants these and may be some other details in selection screen then ???
Alternative is to use direct SE16 as well...
So there are many solutions to one problem... it all depends on user/customer/client's requirement...
Correct me if i am wrong..
Thanks & Regards
ilesh 24x7

8dot3 filenames not created for Program Files and Program Files (x86)

Interesting issue we are realizing on Servers deployed from SCCM 2012. 8dot3names are not created for Program Files and Program Files (x86). they are created for other files/folders at the root of C and below Program Files and Program Files (x86). This is
causing issues when programs are installed and the path is then created with 8dot3 filenames for program files and program files (x86)

Arg. we just got bitten by this "feature", and it's affecting our security software stack (name starts with M and ends with ee), and some ancient crud too.
And found this, which suggests a logical reason for 8dot3name to not be present on servers, but, on clients, I think it's a rather gross assumption...
http://blogs.technet.com/b/josebda/archive/2012/11/13/windows-server-2012-file-server-tip-disable-8-3-naming-and-strip-those-short-names-too.aspx
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Steps For Creating Module programming ?

hi..
if u have any documentation for creating module programming means please send to me .
Thanks in advance
Deepa

Hi,
Go through This Link:--[http://sap.mis.cmich.edu/sap-abap/abap09/sld011.htm]
[http://abaplovers.blogspot.com/2008/03/sap-abap-module-pool-programming.html]
[http://abaplovers.blogspot.com/2008/03/sap-abap-tutorial-module-pool.html]
[http://abaplovers.blogspot.com/2008/03/sap-abap-tutorial-module-pool_17.html]
Regards
Sandipan

How to create one program from few programs

Hi.
I have for example 5 programs and I would like to create one program in which i could switch between this 5 programs. One of these should be running all the time and the others should start when i will switch to them. I need solution or something like that.
Thanks.

You can do a search on "dynamically called" sub vi's.
See the tiny example below of how to call it. You can actually call multiple VI's and they will run in parallel, although you have to be careful when doing this.
You would have to wire False to "Wait till done"
You can stop/close the VI using property node. If you wired False to "Auto Dispose Ref", then make sure you do close ALL references before exiting your program.
Message Edited by Ray.R on 04-27-2010 08:19 AM
Attachments:
callByReference.png ‏16 KB

How can i get access code to create ABAP Program ?

hi guys ,
How can i get access code for creating ABAP Program in my System.
I am using SAP IDES 4.6 Version
Please Help me out .
Regards
Raghu

Hi Raghu,
- license your system (http://service.sap.com/licensekey)
- create a developer key (http://service.sap.com/sscr)
- create a key for your ABAP program (httP://service.sap.com/sscr)
Markus

Creating a program assistant

Similar Messages

Maybe you are looking for