Creating F01 form element on a page with different regions

I have a HTMLDB page wherein there are about 5 different regions each having details for different modes of payment. For Ex: if mode of payments are cash, credit card and purchase order, I have 3 regions for these 3 modes each taking details like amount, credit card no.,expiry date etc...User can select more than 1 payment type.
In order to know the different types selected by user, I want to create a form element with name F01 as page Item and use this as an array. For ex:if cash is chosen then F01(1)='cash',if Purchase order is chosen then F01(3)='po' etc....This I can inturn use in my pl/sql code to get the payment types chosen by looping thru the array of HTMLDB_APPLICATION.G_F01 element.
Can somebody tell me if this is a fesible solution for what I am looking at or is there any other better solution.

I have a HTMLDB page wherein there are about 5 different regions each having details for different modes of payment. For Ex: if mode of payments are cash, credit card and purchase order, I have 3 regions for these 3 modes each taking details like amount, credit card no.,expiry date etc...User can select more than 1 payment type.
In order to know the different types selected by user, I want to create a form element with name F01 as page Item and use this as an array. For ex:if cash is chosen then F01(1)='cash',if Purchase order is chosen then F01(3)='po' etc....This I can inturn use in my pl/sql code to get the payment types chosen by looping thru the array of HTMLDB_APPLICATION.G_F01 element.
Can somebody tell me if this is a fesible solution for what I am looking at or is there any other better solution.

Similar Messages

  • I am creating a form, it shows 1 page, but when I save it as a PDF Form there are 2 pages, 1 is blank. How do I get rid of the blank page in the form?

    I am creating a form, it shows 1 page, but when I save it as a PDF Form there are 2 pages, 1 is blank. How do I get rid of the blank page in the form?

    Hi,
    You may open the original form in FormsCentral and toggle to “Page View” at the lower right corner. Adjust the page content to make sure no page breaks in this view.
    Thanks,
    Wenlan

  • How to Create Master Detail Page with Query Region

    Hi,
    1. I have a requirement that i need to create a Master(Supplier) Detail(Supplier Site) Page with Query Region.
    Eg. Supplier A in Australia has Supplier Sites X in Melbourne and Y in Sydney.
          Supplier B in US has Supplier Sites C in New York and D in California.
    I need to have Search, based on two fields Supplier Name and Country
    Let us assume i am searching with Supplier Name A then the page should be in the below layout
    Query Region
    Supplier Name : A
    Country:
    Master
    Supplier Name  Country
        A                     Australia
    Detail
    Supplier Site  City
    X                   Melbourne
    Y                   Sydney
    In detail VO it should allow me to add new sites which means i need to connect this VO to database to insert new records
    I have gone few threads and understood that this can be achieved by creating SupplierVO, SupplierSiteVO and a ViewLink.
    But when tried i don't know how can i relate my query region with the Suppleir Table(Header Reagin and Table Using Wizard) and Supplier Site Table(Header Region and Table Using Wizard) i am not sure if i am correct or not, please advise
    2. Also i need to have a Open button in this page and if click the button it should navigate to some other page.
    Please help me how can i achieve this.
    - How to design my page with query region and master detail tables
    - what is the AM and CO code need to be handled
    - What is the code should i write in Open button to open new OAF page.
    Thanks,
    CSK

    Hi,
    This link will be useful for your requirement.
    Master Detail Page using Hide Show and Advanced Table inside Advanced Table - OracleArea51.com
    Let me know if you need more help in this.
    Thanks and Regards,
    Myvizhi

  • How can I add donate page with different levels of giving such as $250, $150, $50, Other

    How can I add donate page with different levels of giving such as $250, $150, $50, Other.  I am using Foxy Cart…is this possible?

    From Muse end , you can add texts as donation value with paypal button which would take the users to paypal site for payment, with Foxy Cart you can try the suggestion mentioned here :
    https://forum.foxycart.com/discussion/4417/donation-page-radio-button/p1
    Thanks,
    Sanjit

  • How can I create multiple pages, with different layouts to the others, in DW fluid grid layouts?

    Hi everyone,  : )
    I am creating a website using FGL in DW CS6, v12.0 build 5808.  I do not have Creative Cloud (do you have to pay to use this service?).
    I have created one layout for my home page.
    I would like to create several more pages, but I want them to use different layouts (as well as different content).
    I tried to do something similar before using 'save as' (this was with a non-FGL), but whenever I changed the original page that I had 'save as'd' from, the layout in all the other pages would change too!
    I found a possibility from someone else online suggesting using a template, but have not tried it yet: http://www.linkedin.com/groups/Adding-second-fluid-page-in-119937.S.192422240
    I'm a bit scared of breaking everything, as I am new to web design and have had to restart the whole process a few times due to messing up the fluid.css etc and other issues, so I am taking baby steps.
    Happy to try whatever's suggested and, while I wait for (I hope) your responses, I think I will try the template thing, but from the reply the person who asked the question gave, it sounds like his subsequent pages changed too, as I mentioned above?  *scared*  ; )
    If anyone can help me with this query I would be very grateful.  Thank you!  : )

    Thanks David.
    I tried using different IDs for the other pages, but eventually one of the divs seems to 'break' - it overlaps other divs, or cannot be moved or resized (you can select the outline and it goes blue, but no 'move up a row' or down a row or 'lock to grid' etc icons appear and it can't be drag-re-sized), plus the green overlay disappears (just from that div.  I'm aware of how to turn visual aids on and off), so it seems broken.  This often seems to happen if you rename a div once it's been created; it does not rename in the layout.css on the right side panel (CSS Styles) in DW and the 'broken' behaviour above is exhibited.  Do you know anything about this?  Is this the 'edit this doc at your peril' stuff that most tutorials seem to mention?  Am I doing something wrong?
    I also tried making an FGL and saving out the original boilerplate.css, layout.css and respond.js.  Then created multiple new FGLs and each time it created new versions of layout.css (called 'untitled-1', 2 etc.).  Once I had created all the FGLs, I deleted all the new boilerplates and untitled.css files.  Then restored the original ones and changed the link at the top of each page's html to refer to the same filename (the original layout.css), rather than untitled.css.  I thought this might work and it seemed to for a while, but then as I had to add new div names for the sections on each page, it eventually broke (as above).
    Anyway, I think you have a good point about different layouts and it occurred to me also while I was exploring and waiting for replies here.  I think I will make one layout for all pages and go with that.  I have a couple of questions about that though:
    1. I think the max number of divs I want for one of the pages is 10, but some pages need less divs.  If I only fill e.g. 8 divs on one page, will the other ones be sat there empty?  I think they will actually...I guess I'm asking because I have not tried it yet (will do after this) and it takes so long to do this trial and error.
    2. If the amount of content in each div is different, e.g.  let's say Page 1 has 6 lines of content in div1, but page 2 may have an unlimited amount of content (I will want to add to it in the future).  Will this result in the div on page 1 being a huge block of empty space after its 6 lines?
    Thanks so much for your help!

  • How do I create a automatic second page with different layout settings?

    Hi there,
    I want to create a business letter template with a different second page. I already managed to create a different layout on page nr two, but
    whenever I write a letter with this template and I reach the end of page one, pages creates a thrid page in between my page nr one and nr two with a mixture of the layout of template page nr two and the footer of page nr one.
    I want pages to take my template page nr two (with different header and footer) as second page instead of creating one itself.
    If I don't need a second page - because my letter is to short - I should not have to delete a second page. It simply should not be there...
    Thanks for Help!
    G4's and 12" PB   Mac OS X (10.4.6)  

    Hello Stefan,
    you achieve this with a little trick. Create your letter and set the layout for the first and the second page by inserting a placeholder text. This placeholder text should fill the first page and the top of the second page, so both pages are build in one section. When the entire letter is layouted well, select the placeholder text and than save the letter as a template.
    Now every time you open this template, you only have to insert the main text (replace the placeholder text with real content), and the second page disappears until the main text overflows the borders of the first page. Than you will get the second page again with the layout you have created for it.
    I hope this will work for you like it works fine for me.

  • Is it possible to create a subscription page with different options for blog, newsletter, product announcements, training events, etc?

    I would like to create a subscription page for my Muse site with different subscription choices, but I am not sure if it is possible or, if it is how I should construct it. Any ideas?

    Hi
    This can be done from hosting platform end. If you are using Business Catalyst to host your site , then you can use events module, campaign subscriptions , secure zone subscriptions etc.
    You can create the events/announcements on BC end and then add the module in Muse page which on publish will show the modules on page.
    Thanks,
    Sanjit

  • How can I create pages with different backgrounds

    Hello,
    I'm creating flash site which will have different backgrounds for each page. I'll load the individual pages with "MovieClipLoader." My understanding about MovieClipLoaders is that, it doesn't matter the background of your mc, the page to which you are loading will maintain it's background.
    How do I achieve that?
    Thank you!

    Hello,
    Thanks for the reply, I think it's a very good suggestion. I'm going to try it out and I hope to fill you in.
    Thanks once again.

  • Why doesn't default CREATE USER form show a "Check"  Page before submitting

    Hi
    Interesting question.
    When I create a User (using my Customized Create User Form), and I press SAVE, the Form is submitted immediately. There is no "stop-and-check" page, which allows one to review the entries made BEFORE submitting the form itself.
    For example : when EDITING or UPDATING a User, and you press "Save", the form is not submitted right away. Instead, a new page opens, where you can review the changes you made, to ensure that they are correct. In fact, at the bottom of this new page, there are 4 standard buttons : SAVE...........RETURN TO EDIT............CANCEL
    This is a very good system, because it allows you to check your entries, and make sure they are correct, before pressing SAVE again to submit.
    However, the "Create User" form does not have this same arrangement.
    Is there any way to customize the Form, so that, when creating a User, and you press SAVE, a "check-page" first shows up (just like when updating/editing a user) ?
    Thanks

    Hi
    Interesting question.
    When I create a User (using my Customized Create User Form), and I press SAVE, the Form is submitted immediately. There is no "stop-and-check" page, which allows one to review the entries made BEFORE submitting the form itself.
    For example : when EDITING or UPDATING a User, and you press "Save", the form is not submitted right away. Instead, a new page opens, where you can review the changes you made, to ensure that they are correct. In fact, at the bottom of this new page, there are 4 standard buttons : SAVE...........RETURN TO EDIT............CANCEL
    This is a very good system, because it allows you to check your entries, and make sure they are correct, before pressing SAVE again to submit.
    However, the "Create User" form does not have this same arrangement.
    Is there any way to customize the Form, so that, when creating a User, and you press SAVE, a "check-page" first shows up (just like when updating/editing a user) ?
    Thanks

  • Theme 20: Cannot create a page with 2 regions in one and 2 reg. in next row

    Hello,
    I have a page (template Two Level Tabs) with 4 regions in an application with theme 20.
    Region 1
    ======
    Display Point: Page Template Body (2. items below region content)
    Column: 1
    Region 2
    ======
    Display Point: Page Template Body (2. items below region content)
    Column: 2
    Region 3
    ======
    Display Point: Page Template Body (3. items above region content)
    Column: 1
    Region 4
    ======
    Display Point: Page Template Body (3. items above region content)
    Column: 2
    So I should get a layout like this:
    Region1 | Region2
    Region3 | Region4
    But I get a layout like this:
    Region1 | Region2 | Region3 | Region4
    Is this a but in Theme 20? With an other theme it works fine.
    Regards,
    Mark

    Its all empty html-regions. I create this page because I have the problem with a complex page, but so its easier to find the failure.
    The sequences are 10 (region test1), 20 (region test2), 30 (region new row 1), 40 (region new row 2), look here:
    Regions
    Display Point: Region Position 02
    10           test1     HTML     
    20           test2     HTML (Column 2)     
    Display Point: Region Position 04
    30           new row 1     HTML     
    40           new row 2     HTML (Column 2)

  • 2 manually created tabular form on the same page based on 2 different table

    Hi, I followed the how to document on manually creating tabular form, including one extra row.
    The first form I created works fine, but when I attempt to create the second tabular form based on a different table on the same page, I get the following error message when I try to create the query:
    ORA-04045: errors during recompilation/revalidation of PUBLIC.X ORA-00980: synonym translation is no longer valid
    The logic behind both tabular forms I am using is the same, except that for the second query, I use 100 instead of 1, 300 instead of 3, etc:
    select htmldb_item.hidden(1,empno) empno,
    ename,
    htmldb_item.select_list_from_query(3,job,'select distinct job, job from emp') job,
    htmldb_item.popupkey_from_query(4,mgr,'select ename, empno from emp',10) mgr,
    wwv_flow_item.date_popup(6,null,hiredate) hiredate,
    htmldb_item.text(7,sal,10) sal,
    htmldb_item.text(8,comm,10) comm,
    htmldb_item.select_list_from_query(9,deptno,'select dname, deptno from dept') deptno
    from emp
    Can anybody help?
    Thanks a lot

    Hi,
    If by "100 instead of 1" you mean the column numbers, then this won't work as you can only have a maximum of 50.
    Andy

  • PDF forms and how they work with different Reader versions

    I'll start this off by giving a little background information and describing a workflow scenario. I work as an InHouse designer for a company that keeps the majority of the employee population always a few versions behind. Fortunately, for us designers they keep us updated, but it doesn't always play nicely when you're saving your PDFs for older versions of Acrobat Reader.
    What happens is that I create a form in InDesign, export a PDF, and then create my form fields in Acrobat Pro 9 on a Mac. After saving for version 9 I then take the PDF and test within the Windows environment which our IT is enforcing Acrobat Reader 7. The PDF opens ok and I can fill out the form, but I cannot save. I then open in Acrobat Pro 7 for Windows and then it gives the option to save or make modifications.
    My questions really come down to whether or not Reader 7 is doing this because of how old the technology is, or if that would change if our IT would allow Acrobat Reader 8 or 9? Now I've looked at the Acrobat Pro 9 comparison chart and it states "Enable users of Adobe Reader®   (version 8 or later) to fill in and save PDF forms locally." Does this mean that we just need version 8 or 9 and then people can save the form? What in version 7 is causing us not to be able to save? Did that change the technology in some way? I'm trying to figure out if we get IT to upgrade users to Reader 9 if this will solve the issue or will they have to install Acrobat Standard/Pro 9 to save a PDF form?
    What other selling points could we make to our IT department that using Reader 9 is a lot better than using Reader 7? Any technology benefits, security or functions?
    Thanks

    ~graffiti wrote:
    No version of Reader can save a filled in form unless it has been enabled first.
    To enable, open the file in Acrobat then go to Advanced>Enable usage rights in Adobe Reader...
    And for my standard disclaimer, if you are going to use the forms in a corporate environment, be sure to study and understand the usage limits for enabled forms (the limit is 500 uses, but there are caveats to that) in the EULA. Mostly the enabled forms are meant for very small time users. If you do not meet that requirement, Adobe sells another product that can enable files for unlimited uses but it costs in the tens of thousands of dollars and is a server side solution.
    Hey Graffii,
    I enabled the usage rights and that did help with saving in Reader 7. I am a little concerned about the limit of 500 uses. Let me try and understand you a little better. I have a PDF that has a couple form fields and you're saying that the PDF can only be opened 500 times? I've never heard of restrictions on PDFs before. Does this happen after you place just 1 form field? How do I find out more information? I looked in the EULA, but found nothing.
    Also, what does Adobe mean here "Enable users of Adobe Reader®   (version 8 or later) to fill in and save PDF forms locally." Are they saying that you need Reader 8 or later to read a form or that you need Acrobat Pro 8 or later to enable the form feature?
    It's all very confusing because one of the features they tout in version 9 is the ability to save forms locally, but once I enable the form I could save it with Reader 7. It's hard to tell if they are referring to Reader 9 or Acrobat Pro 9.
    Thanks

  • How can I create a form which accepts answers in 2 different languages?

    Hi,
    I'm trying to create a form where the users can answer either in English or Hebrew (with the ability to answer some of the questions in Hebrew and some in English)
    Currently on the form options it's set for English language (Didn't see an Hebrew option there) and when I test the form I get this error for the fields I try and fill in Hebrew: "The field contains unsupported characters. Please modify your entry."
    Is there a way to allow both languages to be inputted into the fields?
    Thanks

    Just use Swing.
    You can integrate Swing and Java3D.

  • 2 main windows in 2 different pages with different layouts

    Hi Guru's,
    I'm working on Smartforms.
    My problem is, i have 2 different pages with 2 diiferent main windows.
    The First Page lasts after 7 pages of Data Printing.
    It is coming corrctly.
    I've assign the Next Page as Second Page in the First Page and i'm maintaining a condition in the First Page to go to the Second page.
    Everything is working fine, but in the second page i'm not getting the Main Window.
    What could be the Problem??? Why the control is not going to main window of second page???
    Thanks in advance.
    Regards,
    Adi.

    Try like this:
    1. Set the Next page of the FIRST as FIRST
    2. In the MAIN window of the FIRST, after completing the TABLE, create a command which calls the SECOND PAGE.
    3. In SECOND page, create a MAIN window, with differnet name. If you create a same name, system will automatically refer the MAIN window in the FIRST page.
    4. Set the next page of the SECOND as SECOND.
    Regards,
    Naimesh Patel

  • Livecycle Designer 8 - Is it possible to have button to clear fields after user has clicked submit by email button so user can reuse form to send another response with different answers?

    Users will use form to fill in stats for enquiries so they want to keep form open, complete a form, click button to submit by email, then click another button to clear form, form now ready to accept form's responses.  They dont' want to keep opening form each time form needs to be completed.
    Hope you help.
    Thanks Sandra

    Hi,
    Thanks for your response, not sure what you mean by a loop.  I put together
    a draft form to show staff in our Knowledge Centre the sort of thing
    Livecycle Designer can do.
    (See attached file: Library  Request  Form_pub_0001.pdf)
    They are currently writing out on form and manually putting into excel to
    keep stats on the requests.
    Due to current Global Financial Crisis my section does not want to spend
    extra money at the moment seeking assistance from our tech heads.  So we
    are looking for least work no expense option for keeping stats.  I am a PA
    who just happens to have Livecycle program on my computer.
    We use Lotus Notes so I thought the staff could save copy of Library
    request form in the stationery folder.  The staff using the form want to be
    able to do the following:
    1. open the Library request form at the beginning of the day;
    2. when a request comes in, complete the form and click on Send by email
    button
    3. click on a Clear Data button to clear all data from all fields so the
    form is open ready for when the next request comes in.
    Staff are time poor and, as this is only one of their numerous duties, they
    don't want to keep going to a location and opening a file which can be very
    slow on some days
    Each day form may be filled out by approximately 15 staff who may receive
    anything from 0 - 4 requests a day.
    I am not a tech head so script writing is a deep, dark mystery.  Can you
    help using the form above as an example for achieving step 3 above.
    Thanks,
    Sandra Smith
    Personal Assistant
    PricewaterhouseCoopers Australia
    Office: ++61 (2) 8266 9069
    Fax: ++61 (2) 8286 9069
    [email protected]
    http://www.pwc.com/au
                                                                                    Kacyndra                                                 
                 <[email protected]                                        
                 >                                                          To
                                           Sandra K Smith/AU/TLS/PwC@AsiaPac
                 08/08/2009 12:25                                           cc
                 AM                                                                               
    Subject
                                           Livecycle 
                 Please respond to         Designer 8 - Is it possible to have
                 clearspace-200985         button to clear fields after user
                 0098-481178-2-216         has clicked submit by email button
                 [email protected].         so user can reuse form to send 
                     adobe.com             another response with different
                                           answers?                                                                               
    if i understand this correctly, you just want everything cleared whena
    buttons is pressed?
    you can either do it individually:
    on button click:
    mytextField.rawData=""
    or do a loop, using child/paretns..

Maybe you are looking for