Creating IDOC for article using BD10 tcode

Hi Excperts,
we are creating idoc for the articles using bd10 tcode.
we are using idoc type ARTMAS05. But system not filling the segment E1BPE1MLEART Retail Data Transfer: Vendor-Specific EANs . Could you anyone help me , why sap standard program is dropping this segment.
do we need set up any data in material master for his segment. .
you will be rewarded.
Regards
Rama.

Hi Rama,
Generally if the segment is not being filled it is because the values do not exist.
The segment is not mandatory. So your IDoc should still be created.
Try:
By selecting the Send material in full indicator, you can also distribute the following dependent data for the material (depending on the type of system) in addition to the actual material master data:
Retail system
Listing conditions
Purchasing info records
Source list records
Purchasing conditions
Sales conditions
BOM allocations
Best regards,
Glynn

Similar Messages

Create IDOC for HR using adapters.

Hello,
I want to send modification (HR master Data & organization(PA & OM)) from one instance to another passing throuth the XI.
I have created everything (WE20, we21, sm59, idx1, idx2). I have build an scenario in the integration Builder. But how can I do to create the IDOC? Do I have to user a BAPI? I think I have to use the IDOC HRMD_A.HRMD_A06, but I'm not sure.
Can someone help me? I'm a BC Consultant, I don't know anything about BAPIs or HR.
Thank you very much
Pablo Mortera

hi,
have a look at this document
for a procedure:
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAALEHR/CABFAALEHR_ALE_VERT.pdf
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI FAQ - Frequently Asked Questions</a>

How to create IDOC for customer defined table

hi,
How to create IDOC for customer defined table Records and how to send this IDOC to target system.
what message type will be used and on receiving system how to post these records.
thankx.
pillac.

Hi,
You need to create a custom message type and custom IDOC type for this with whatever fields you want send. You need to create segments (WE30), IDOC type (WE30), Message types (WE81) and assign the message type to the IDOC type (WE82).
You will have trigger the IDOC using a Report or something after doing the partner profile settings.
Similary in the target system also, you will have do all the settings.
Take a look the links to find out what settings needs to be done.
http://help.sap.com//saphelp_470/helpdata/EN/0b/2a611c507d11d18ee90000e8366fc2/frameset.htm
http://www.sappro.com/downloads/OneClientDistribution.pdf
Regards,
Ravi
Note : Please mark the helpful answers and close the thread if the issue is resolved.

Outbound IDOC for Article Master in WPMA without Price

Hi,
How to Generate an Outbound IDOC for Article Master in WPMA Tcode without maintaing Price for the Article. Please suggest Is it Possible in IS-Retail. If so, what needs to be Done.
Regards,
Selvakumar. M

Hi Selvan
In patner profile of outbound, Assign WP_PLU01 instead WP_PLU03..
This will solve ur problem
Regards
Vijai Jain

Can I create books for iPhone using iBooks Author?

Can I create books for iPhone using iBooks Author?

There is a new $5 iBooks Creator app in iOS app store for the iPad.
The output looked pretty good for an iPad app.
There is a video on how to use it to give you an idea of how easy it is.
It creates ePub 2 whihc can be read on all platforms with an ePub reader except Amazon Kindle whihc forbids such things.
You can run the ePub through Calibre and get MOIB for Kindle which works for me.
I have done thirty or forty conversions so far.

Sample code creating BOM for CS01 using BDC recording.

Hi,
Can anyone give me sample coding creating BOM for CS01 using BDC recording.
I want to display the flat file records,under one (Alternative BOM).
I m already working on it,but i m getting one A.BOM for each records.
[       Header data          ]    [      Item Data               ]
SOFTDRINKS   WIND   1       13            1     ml     l
SOFTDRINKS   WIND   1       11            1     ml     l
SOFTDRINKS   WIND   1       15        1     ml     l
SOFTDRINKS   WIND   1       14       1     ml     l
Code:
report ZBOM
       no standard page heading line-size 255.
*include bdcrecx1.
*DATA: BEGIN OF bdc OCCURS 0,
      matnr(18),
      werks(4),
      stlan(1),
     END OF BDC.
*DATA: BEGIN OF BDC1 OCCURS 0,
      idnrk(18),
      MENGE(18),
      MEINS(3),
      postp(1),
      posnr(4),
     END OF bdc1.
DATA: BEGIN OF BDCDATA OCCURS 0,
         matnr(18),
         werks(4),
         stlan(1),
         idnrk(18),
         MENGE(18),
         MEINS(3),
         postp(1),
         posnr(4),
      END OF BDCDATA.
data ibdcdata type standard table of bdcdata WITH header line.
*start-of-selection.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    FILENAME                      = 'C:\Documents and Settings\dilipkumar.b\Desktop\soft.txt'
   FILETYPE                       = 'ASC'
   HAS_FIELD_SEPARATOR            = ','
HEADER_LENGTH                 = 0
READ_BY_LINE                  = 'X'
DAT_MODE                      = ' '
CODEPAGE                      = ' '
IGNORE_CERR                   = ABAP_TRUE
REPLACEMENT                   = '#'
CHECK_BOM                     = ' '
VIRUS_SCAN_PROFILE            =
NO_AUTH_CHECK                 = ' '
IMPORTING
FILELENGTH                     =
HEADER                         =
TABLES
    DATA_TAB                      = BDCDATA
EXCEPTIONS
FILE_OPEN_ERROR               = 1
FILE_READ_ERROR               = 2
NO_BATCH                      = 3
GUI_REFUSE_FILETRANSFER       = 4
INVALID_TYPE                  = 5
NO_AUTHORITY                  = 6
UNKNOWN_ERROR                 = 7
BAD_DATA_FORMAT               = 8
HEADER_NOT_ALLOWED            = 9
SEPARATOR_NOT_ALLOWED         = 10
HEADER_TOO_LONG               = 11
UNKNOWN_DP_ERROR              = 12
ACCESS_DENIED                 = 13
DP_OUT_OF_MEMORY              = 14
DISK_FULL                     = 15
DP_TIMEOUT                    = 16
OTHERS                        = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*perform open_group.
loop at bdcdata.
perform bdc_dynpro      using 'SAPLCSDI' '0100'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29N-STLAN'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'RC29N-MATNR'
                              'SOFTDRINKS'.
perform bdc_field       using 'RC29N-WERKS'
                              'WIND'.
perform bdc_field       using 'RC29N-STLAN'
                              '1'.
perform bdc_field       using 'RC29N-DATUV'
                              '16.09.2008'.
perform bdc_dynpro      using 'SAPLCSDI' '0110'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'RC29K-BMENG'
                              '1'.
perform bdc_field       using 'RC29K-STLST'
                              '1'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29K-EXSTL'.
perform bdc_dynpro      using 'SAPLCSDI' '0111'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29K-LABOR'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_dynpro      using 'SAPLCSDI' '0140'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29P-POSTP(01)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=FCBU'.
perform bdc_field       using 'RC29P-IDNRK(001)'
                              BDCDATA-IDNRK.
perform bdc_field       using 'RC29P-MENGE(001)'
                              BDCDATA-MENGE.
perform bdc_field       using 'RC29P-MEINS(001)'
                              BDCDATA-MEINS.
perform bdc_field       using 'RC29P-POSTP(001)'
                              BDCDATA-POSTP.
perform bdc_dynpro      using 'SAPLCSDI' '0130'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29P-POSNR'.
perform bdc_field       using 'RC29P-POSNR'
                               BDCDATA-POSNR.            "'0010'.
perform bdc_field       using 'RC29P-IDNRK'
                              BDCDATA-IDNRK.             "'15'.
perform bdc_field       using 'RC29P-MENGE'
                              BDCDATA-MENGE.             "'1'.
perform bdc_field       using 'RC29P-MEINS'
                              BDCDATA-MEINS.             "'ml'.
perform bdc_dynpro      using 'SAPLCSDI' '0131'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29P-POTX1'.
perform bdc_field       using 'RC29P-SANKA'
                              'X'.
*perform bdc_transaction using 'CS01'.
*perform close_group.
CALL TRANSACTION 'CS01' USING IBDCDATA MODE 'A' UPDATE 'S'.
REFRESH IBDCDATA.
clear ibdcdata.
endloop.
       Start new screen                                              *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR iBDCDATA.
iBDCDATA-PROGRAM = PROGRAM.
iBDCDATA-DYNPRO   = DYNPRO.
iBDCDATA-DYNBEGIN = 'X'.
APPEND ibDCDATA .
ENDFORM.
       Insert field                                                  *
FORM BDC_FIELD USING FNAM FVAL.
IF FVAL <> NODATA.
    CLEAR iBDCDATA.
    iBDCDATA-FNAM = FNAM.
    iBDCDATA-FVAL = FVAL.
    APPEND iBDCDATA .
ENDIF.
ENDFORM.

Hi,
      I tried with the sample code but i m not getting the required result.
    Can anyone give some other soln.
Code:
REPORT ZBOM2
no standard page heading line-size 255.
*include bdcrecx1.
TYPES: BEGIN OF TY_FLAT,      " structure for flat file
        STRING(200),
       END OF TY_FLAT.
TYPES: BEGIN OF TY_HEAD,     " structure for header file
        IND(2) TYPE N,
        MATNR(18),
        WERKS(4),
        STLAN(1),
       END OF TY_HEAD.
TYPES : BEGIN OF TY_ITEM,    "structure for item file
          IND(2) TYPE N,
          POSTP(1),
          IDNRK(18),
          MENGE(13),
          meins(3),
        END OF TY_ITEM.
TYPES :BEGIN OF TY_FLAT1,   " structure for final file
         MATNR(18),
         WERKS(4),
         STLAN(1),
         posnr(4),
         POSTP(1),
         IDNRK(18),
         MENGE(13),
         meins(3),
       END OF TY_FLAT1.
INTERNAL TABLE DECLERATIONS:
DATA : T_FLAT TYPE STANDARD TABLE OF TY_FLAT,
       T_FLAT1 TYPE STANDARD TABLE OF TY_FLAT1,
       T_HEAD TYPE STANDARD TABLE OF TY_HEAD,
       T_ITEM TYPE STANDARD TABLE OF TY_ITEM,
       T_BDCDATA TYPE STANDARD TABLE OF BDCDATA with header line ,
       T_BDCMSG TYPE STANDARD TABLE OF BDCMSGCOLL.
WORK AREA DECLERATIONS:
DATA : ST_FLAT TYPE TY_FLAT,
       ST_FLAT1 TYPE TY_FLAT1,
       ST_HEAD TYPE TY_HEAD,
       ST_ITEM TYPE TY_ITEM,
       ST_BDCDATA TYPE BDCDATA,
       ST_BDCMSG TYPE BDCMSGCOLL.
VARIABLES:
DATA : FNAM TYPE LOCALFILE,           "rlgrap-filename,
       FTYP TYPE RLGRAP-FILETYPE,
       LF_FNAM TYPE STRING.
DATA : V_IND(2) TYPE N,                " value 1,
       V_FLD(20),
       V_NO(2) TYPE N.
*start-of-selection.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    FILENAME                      = 'C:\Documents and Settings\dilipkumar.b\Desktop\soft.txt'
   FILETYPE                       = 'ASC'
   HAS_FIELD_SEPARATOR            = ','
HEADER_LENGTH                 = 0
READ_BY_LINE                  = 'X'
DAT_MODE                      = ' '
CODEPAGE                      = ' '
IGNORE_CERR                   = ABAP_TRUE
REPLACEMENT                   = '#'
CHECK_BOM                     = ' '
VIRUS_SCAN_PROFILE            =
NO_AUTH_CHECK                 = ' '
IMPORTING
FILELENGTH                     =
HEADER                         =
TABLES
    DATA_TAB                      = T_FLAT
EXCEPTIONS
FILE_OPEN_ERROR               = 1
FILE_READ_ERROR               = 2
NO_BATCH                      = 3
GUI_REFUSE_FILETRANSFER       = 4
INVALID_TYPE                  = 5
NO_AUTHORITY                  = 6
UNKNOWN_ERROR                 = 7
BAD_DATA_FORMAT               = 8
HEADER_NOT_ALLOWED            = 9
SEPARATOR_NOT_ALLOWED         = 10
HEADER_TOO_LONG               = 11
UNKNOWN_DP_ERROR              = 12
ACCESS_DENIED                 = 13
DP_OUT_OF_MEMORY              = 14
DISK_FULL                     = 15
DP_TIMEOUT                    = 16
OTHERS                        = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT T_FLAT INTO ST_FLAT.
SPLIT ST_FLAT AT CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB
INTO ST_FLAT1-MATNR ST_FLAT1-WERKS
ST_FLAT1-STLAN ST_FLAT1-POSTP
ST_FLAT1-IDNRK ST_FLAT1-MENGE ST_FLAT1-MEINS.
APPEND ST_FLAT1 TO T_FLAT1.
CLEAR ST_FLAT1.
ENDLOOP.
SORT T_FLAT1 BY MATNR WERKS STLAN POSTP IDNRK MENGE MEINS.
LOOP AT T_FLAT1 INTO ST_FLAT1.
MOVE :
ST_FLAT1-MATNR TO ST_HEAD-MATNR,
ST_FLAT1-WERKS TO ST_HEAD-WERKS,
ST_FLAT1-STLAN TO ST_HEAD-STLAN,
ST_FLAT1-POSTP TO ST_ITEM-POSTP,
ST_FLAT1-IDNRK TO ST_ITEM-IDNRK,
ST_FLAT1-MENGE TO ST_ITEM-MENGE,
ST_FLAT1-MENGE TO ST_ITEM-MEINS.
AT new STLAN.
ADD 1 TO V_IND.
ENDAT.
MOVE V_IND TO ST_HEAD-IND.
MOVE V_IND TO ST_ITEM-IND.
APPEND ST_HEAD TO T_HEAD.
APPEND ST_ITEM TO T_ITEM.
CLEAR ST_HEAD.
CLEAR ST_ITEM.
ENDLOOP.
CLEAR V_IND.
*perform open_group.
SORT T_ITEM BY IND.
SORT T_HEAD BY IND.
DELETE ADJACENT DUPLICATES FROM T_HEAD.
LOOP AT T_HEAD INTO ST_HEAD.
perform bdc_dynpro      using 'SAPLCSDI' '0100'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29N-STLAN'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'RC29N-MATNR'
                              ST_HEAD-MATNR.
perform bdc_field       using 'RC29N-WERKS'
                              ST_HEAD-WERKS.
perform bdc_field       using 'RC29N-STLAN'
                              ST_HEAD-STLAN.
perform bdc_field       using 'RC29N-DATUV'
                              '16.09.2008'.
perform bdc_dynpro      using 'SAPLCSDI' '0110'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'RC29K-BMENG'
                              '1'.
perform bdc_field       using 'RC29K-STLST'
                              '1'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29K-EXSTL'.
perform bdc_dynpro      using 'SAPLCSDI' '0111'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29K-LABOR'.
LOOP AT T_ITEM INTO ST_ITEM WHERE IND = ST_HEAD-IND.
ADD 1 TO V_NO.
perform bdc_dynpro      using 'SAPLCSDI' '0140'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29K-MENGE(01)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=FCBU'.
perform bdc_dynpro      using 'SAPLCSDI' '0140'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29P-POSNR(01)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=FCBU'.
perform bdc_field       using 'RC29P-IDNRK(01)'
                              ST_ITEM-IDNRK.
perform bdc_field       using 'RC29P-MENGE(01)'
                              ST_ITEM-MENGE.
perform bdc_field       using 'RC29P-MEINS(01)'
                              ST_ITEM-MEINS.
perform bdc_field       using 'RC29P-POSTP(01)'
                              ST_ITEM-POSTP.
CONCATENATE 'RC29K-IDNRK(' V_NO ')' INTO V_FLD.
CONDENSE V_FLD.
PERFORM BDC_FIELD USING V_FLD
ST_ITEM-IDNRK.
CONCATENATE 'RC29K-MENGE(' V_NO ')' INTO V_FLD.
CONDENSE V_FLD.
PERFORM BDC_FIELD USING V_FLD
ST_ITEM-MENGE.
CONCATENATE 'RC29K-MEINS(' V_NO ')' INTO V_FLD.
CONDENSE V_FLD.
PERFORM BDC_FIELD USING V_FLD
ST_ITEM-MEINS.
CONCATENATE 'RC29K-POSTP(' V_NO ')' INTO V_FLD.
CONDENSE V_FLD.
PERFORM BDC_FIELD USING V_FLD
ST_ITEM-POSTP.
V_NO = 1.
ENDLOOP.
CLEAR V_NO.
*perform bdc_dynpro      using 'SAPLCSDI' '0130'.
*perform bdc_field       using 'BDC_OKCODE'
                             '/00'.
*perform bdc_field       using 'BDC_CURSOR'
                             'RC29P-POSNR'.
*perform bdc_field       using 'RC29P-POSNR'
                              POSNR.
*perform bdc_field       using 'RC29P-IDNRK'
                             bdcdata-IDNRK.
*perform bdc_field       using 'RC29P-MENGE'
                             bdcdata-MENGE.
*perform bdc_field       using 'RC29P-MEINS'
                             bdcdata-MEINS.
perform bdc_dynpro      using 'SAPLCSDI' '0131'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29P-POTX1'.
perform bdc_field       using 'RC29P-SANKA'
                                 'X'.
perform bdc_dynpro      using 'SAPLCSDI' '0133'.
perform bdc_field       using 'BDC_OKCODE'
                                '/00'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29P-matkl'.
perform bdc_field       using 'RC29P-SANKA'
                                 'zv01'.
perform bdc_dynpro      using 'SAPLCSDI' '0140'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29N-POSNR(01)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=FCBU'.
*perform bdc_transaction using 'CS01'.
perform close_group.
CALL TRANSACTION 'CS01' USING t_bdcdata MODE 'A' UPDATE 'S'.
REFRESH t_bdcdata.
clear t_bdcdata.
endloop.
       Start new screen                                              *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR st_bdcdata.
st_bdcdata-PROGRAM = PROGRAM.
st_bdcdata-DYNPRO   = DYNPRO.
st_bdcdata-DYNBEGIN = 'X'.
APPEND st_bdcdata to t_bdcdata .
ENDFORM.
       Insert field                                                  *
FORM BDC_FIELD USING FNAM FVAL.
IF FVAL <> NODATA.
    CLEAR st_bdcdata.
    st_bdcdata-FNAM = FNAM.
    st_bdcdata-FVAL = FVAL.
    APPEND st_bdcdata to t_bdcdata.
ENDIF.
ENDFORM.

Create IDOC for alternative unit of measure

Hello,
I need to send the alternative UoM via an IDOC. My problem is that i do not know how to manually send the UNIMA2 IDOC.
Like when i send MATMAS, i use BD10. Is there any program or transaction for sending UNIMA2?
Thank you

The data is already contained in MATMAS03.
So no need to have another IDOC type.

How to Create IDOCs for a Custom Basic IDOC Type

Hi friends,
I Have a Custom Basic IDOC Type.
For that IDOC Type i need to Create an IDOC for every Header Item.
The Header Item may have variation (Different) number of Line Items.
in this case can i Use
MASTER_IDOC_DISTRIBUTE and create the Idoc for each Header Item.
or is there any way to create the IDOCs
Thanks in Advance.
Ganesh.

Hi ,
If I am not wrong you need to pass data via fm "MASTER_IDOC_DISTRIBUTE".
So you can transfer row by row data into SDATA filed of structure type :EDID ,
by concatenating the data into one field of type sdata. and passing it into the fm.
I.e defining a internal table of type EDIDD.
Try this :
DATA : itab TYPE TABLE OF edid,
       itab1 TYPE TABLE OF edidc.
LOOP AT itab2 INTO wa_itab2.
CONCATENATE wa_itab2-t1 wa_itab2-t2 wa_itab2-t3 wa_itab2-t4 wa_itab2-t5
INTO result.
itab-sdata = result.
APPEND itab.
all function 'MASTER_IDOC_DISTRIBUTE'
   exporting
     master_idoc_control                  =itab1
OBJ_TYPE                             = ''
CHNUM                                = ''
   tables
     communication_idoc_control           =
     master_idoc_data                     =itab.
EXCEPTIONS
ERROR_IN_IDOC_CONTROL                = 1
ERROR_WRITING_IDOC_STATUS            = 2
ERROR_IN_IDOC_DATA                   = 3
SENDING_LOGICAL_SYSTEM_UNKNOWN       = 4
OTHERS                               = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

Create idocs for FI documents posted before ALE setup

The users were creating FI documents normally during May 2006, but the ALE financial interface was not set up until the end of that May. We are using a FI message type which is a copy from a standard one.
Is it possible to create idocs from those FI documents posted before setting up the ALE connection so those FI documents can be sent via ALE?
CM

To copy number ranges to a new year you do with the transaction OBH2.
When you want to transport number ranges you ask for problems. Only for a new implementation you can do it but not when there are existing number ranges with postings for that company

Mass price change for articles using VKP5

Hi All,
I have came across a requirement where I need to create price calculation for articles in mass using VKP5 transaction. What are the ways I can achieve this? e.g. BDC, LSMW , BAPI etc.
Thanks
Ashutosh

Hi Jay,
Thanks a lot for your valuable reply, let me give you an overview of the requirement, we have around 16K articles for which we need to create price calculation using VKP5 which usually created the pricing document. is this BAPI can be used for the same functionality? do you have an idea how to implement this BAPI if it serves the required purpose.
Thanks for your inputs
Ashutosh

Create Budget for Grants Using BAPI_0036_CREATE

Hi Gurus,
Is there any people using BAPI_0036_CREATE to create budget for grants before? I use the test data to run it in test run mode, it is ok. But when I try to run it in batch commit mode, it always has error: "No instance of object type BudgetEntryDocGM has been created. External reference:" and "Specify grant". Definitely I already specified grant and external reference in both header and item input tables. If you ever use this BAPI before, please give me some suggestion.
Thanks,
Ryan

Well, it looks like customizing. The long text for FMKU 026 includes:
The customizing settings require that you specify a as an FM account assignment element. You did not enter a in your budget entry.
(It seems to be saying you have to add a grant somewhere in account assignment). This may also help with the other message.
There are also some notes for this BAPI.
Rob

Create customcomponent for pdfwatermarking using any filter or service

Hi,
Can i create custom component for pdfwatermarking using any filters or service?
Thanks in advance

you have to ditch rules and go with a filter "prepareForFileResponse" and set a value for PdfwTemplateID based on your criteria (can be anything...).
make sure your filter is executed before the filter from pdfwatermark compoenent.
look into "pdfwfFileFilter.class" file
--search for prepareForFileResponse
--the code actually tried to pull "PdfwTemplateID" prior to evaluating any rules and if the id is null only then it evaluates the rules.
Edit:there seems to be some code bug(watermark version 11.1.1.3) ...the following line is evaluated only when PdfwTemplateID is null but is used throught the method.
drsPdfInfo = getDocInfo(ws, binder.getLocal("dDocName"), null, dIDContent);
Edited by: Bunty on Apr 5, 2013 10:16 AM

Creating Idoc for a material created

Hi gurus,
i have a requirement for every Material i create an Idoc has to be generated .So how to assign an particular Idoc to my Material.
Pls help me.
Thanks and regards,
Rajesh.

the configurations which we do for material master is below...we don't give any output for material master,becoz its a master data not transactional data..
For distributing master data like material master, vendor master, customer master we have standard transaction codes that are provided by sap.
Bd10(send material master)
Bd12(send customer master)
Bd14(send vendor master)
Bd30(boms)
The order of Tcodes are:
Bd54 (creating logical systems)
Scc4 (assigning logical systems )
Sm59 (rfc destination)
We81 ( message type)
We30 ( idoc type)
We31 ( segment type)
We82 (linking message type and idoc type)
We21 (creating port)
We20 (partner profiles)
Bd64 (Distribution model)
Bd10 (material master)
Ex: material master.
Message type: matmas.
Idoc type: matmas05.
follow these links
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
create material number in Idoc
Reward Points if found helpfull..

How to create bdc for fbs1 using both call transaction and session

Hi Friends,
i have one problem with tcode FBS1, i need to create a bdc program for both call transaction and session method using subroutine.
first call transaction needs to execute if there is an error sesion has to execute. if u have code please forward.
thanks in advance.
chandramouli pothugunta

where as in call transaction we can do error handling explictly.those errors are stored in one file .this file will send to the error log(session method),i.e session log.
in the above case we use both call transaction n session method at time in one program.sample code is below ,go through it .
data : begin of itxk01 occurs 0,
end of itxk01.
data : bdcdata like itbdcdata occurs 0 with header line.
data : itbdcmsgcoll like itbdcmsgcoll occurs 0 with header line,
itxk01 like itxk01-dup occurs 0 with header line.
call gui-upload.
loop at itxk01.
refresh itxk01.
perform bdc-dynpr0 using 'prg' 'scr'
perform bdc-dynfld using fnam fval
call transaction 'xk01' using bdcdata mode 'a' update 's' messages into itbdcmsgcoll.
if sy-subrc ne 0.
append itxk01 into itxk01-dup.
endif.
endloop.
if not itxk01-dup[] is initial.
refresh itck01.
call bdc_open_group
itxk01 = itxk01-dup.
loop at itxk01.
refresh itxk01.
perform bdc-dynpr0 using 'prg' 'scr'
perform bdc-dynfld using fnam fval
call bdc-insert.
endloop.
call bdc-close-group.
form bdc-dynpr0 using pr sc
endform .
form bdc-field using fnam faval
endform.
this will help u.
reward points for me
kiran

How to create idocs for existing records

Hi
are there any standard program by which i could create and send the existing customer invoice (VF01) data thru EDI idoc to a 3rd party system even if the output type is not defined during the creation of the invoices?
Regards
Sujai

I am supposed to send all customer invoice data to an external system. I have been able to configure the system to trigger an idoc when an invoice is saved. That takes care of my delta transfer. But i would like to know if there is a way by which i can send all the existing customer invoice data to the 3rd party system that were already created in the SAP system. Something like an initial download of all the existing records.
I am asked to keep the abap development to Zero as far as possible, hence i am exploring the idea of finding any standard program that could do this for me.
just like Tx: BD10 for the material master data.
I tried VF31 but the problem is that the invoice that would have been created might not contain the output type as EDI. So is there a way by which i can achieve this task with any standard program?
I also have another question:
how do i do the configuration to send all the SD invoices to a specific partner all the time thru EDI by default?
Sujai

Creating IDOC for article using BD10 tcode

Similar Messages

Maybe you are looking for