Creating Sawtek filter library component

Hello all. I couldn't find anything related to my question so I'll write my first post.
I am trying to replicate the RF 70MHz on Multisim.
Then I encountered a Sawtek Filter 854660 within the circuit diagram.
I followed the steps on creating a new library component from the NI website:
http://www.ni.com/tutorial/3173/en/
but to no avail.
On the 854660 pdf datasheet, I cannot find the type of package required to create this filter on the multisim library.
Can any one offer some advice as to how can I create a new package for the sawtek filter? Or perhaps the package is already in multisim but I might have missed it?
Kind Regards,

Sorry, I couldn't attach the files on the previous post.
Attachments:
854660.pdf ‏543 KB
RF 70MHz.jpg ‏60 KB

Similar Messages

Creating a library component containing Excel apiu0092s in NWDI

chk it
Using External JARs in Web Dynpro Dev.Component for NW04s SP16

Hi Kanwal,
Thanks for the link. I've followed similar steps, but still unable to get the jars in my library component.
Mr. Kent has resolved using Enterprise Application component. I don't know how to create an Enterprise application with the jars declared in its public part.
Please help,
Yuvaraj

Powershell Script to create "custom" Document Library

I have a powershell script which creates a Document Library for every user in AD.
This works, but rather than using the default Document Library I want it use a custom Document Library. However this isnt working.
My script to create the default Document Library is this...
[System.Reflection.Assembly]::Load("Microsoft.SharePoint, Version=12.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c")
$site = new-object Microsoft.SharePoint.SPSite("http://servername/sitename");
$siteweb = $site.OpenWeb();
$webs = $siteweb.Webs;
$strFilter = "(&(objectCategory=User)(name=accountname))"
$objDomain = New-Object System.DirectoryServices.DirectoryEntry
$objSearcher = New-Object System.DirectoryServices.DirectorySearcher
$objSearcher.SearchRoot = $objDomain
$objSearcher.PageSize = 1000
$objSearcher.Filter = $strFilter
$objSearcher.SearchScope = "Subtree"
$colProplist = "samaccountname"
foreach ($i in $colPropList){$objSearcher.PropertiesToLoad.Add($i)}
$colResults = $objSearcher.FindAll()
foreach ($objResult in $colResults)
$objItem = $objResult.Properties; $objItem.samaccountname
$listTemplate = [Microsoft.SharePoint.SPListTemplateType]::DocumentLibrary
$listId = $siteweb.Lists.Add($objItem.samaccountname, "", $listtemplate);
$list = $siteweb.Lists.GetList($listId, $true);
$roleDef = $siteweb.RoleDefinitions.GetByType("Contributor");
$user = "domain\" + $objItem.samaccountname;
$rolAssign = new-object Microsoft.SharePoint.SPRoleAssignment($user, "email", "name", "notes");
$rolAssign.RoleDefinitionBindings.Add($roleDef);
if(!$list.HasUniqueRoleAssignments)
{$list.BreakRoleInheritance($true);}
for ($i = $list.roleAssignments.Count - 1; $i -gt -1; $i--)
{ $list.RoleAssignments.Remove($i) }
$list.RoleAssignments.Add($rolAssign);
$list.Update();
Now I have a custom Document Library named "TESTLIB" so if I substitute the line:
$listTemplate = [Microsoft.SharePoint.SPListTemplateType]::DocumentLibrary
with
$listTemplate = [Microsoft.SharePoint.SPListTemplateType]::TESTLIB
Then it errors with this...
How can I script powershell to create a "custom" Document Library?
Thanks

The below link should help you in creating custom document library using powershell
http://blogs.technet.com/b/heyscriptingguy/archive/2010/09/23/use-powershell-cmdlets-to-manage-sharepoint-document-libraries.aspx
Vinod H
Thanks for the link but I cant see anything to assist creating a custom library? Was there something in paticular you saw?

Creating a custom JSF Component

Hi,
I am trying to create a custom JSF Component. My ultimate goal is to pass a bean to my custom component and have the component render some HTML output based on the info contained in the bean. Before I attempt that I am trying to get a simple custom component to just work. This component is based on the tutorial found here: http://www.jsftutorials.net/components/index.html
This tutorial just creates a component that outputs a <div> tag around the body contents of the custom component.
To keep this short I have done the following items from the tutorial link above:
1) I have created the tld file defining the tag class, name, uri and shortname
2) I have also created the tag class called TickerTag.java along with the component class UITicker.java. These classes are straight copy-and-paste jobs from the tutorial link and compile fine.
3)My faces-config.xml file has the proper component definition of
<component>
<component-type>ticker</component-type>
<component-class>ticker.UITicker</component-class>
</component>
This was the easy part. The example then goes on to use the custom component in a JSP page. I managed to get the custom component to work in a JSP page BUT my problem is getting the custom component to work in an XHTML file.
I thought all I had to do was define an xml namespace using the uri from my tld file like so:
Note: My uri is www.fubar.com/tags and is defined in the tld file.
<html xmlns="http://www.w3.org/1999/xhtml"
xmlns:ui="http://java.sun.com/jsf/facelets"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:t="http://myfaces.apache.org/tomahawk"
xmlns:u="http://www.fubar.com/tags">
I then try to use the tag like so <u:ticker> <f:verbatim>Hello JSF Component</f:verbatim></u:ticker>
I am expecting the following output: <div>Hello JSF Component
</div>
but instead I get
<u:ticker>Hello JSF Component</u:ticker>
It seems the tag is not even processed. This is my first jump into custom components. I have done custom JSP tags in the past but I never tried to display them on an XHTML page.
If you are wondering why I am using XHTML pages, this was setup a while back by a previous developer. Changing everything to a JSP would take a long time and probably break some stuff I am not aware of yet. As such the web.xml file of this JSF web app has the following:
<context-param>
<param-name>javax.faces.DEFAULT_SUFFIX</param-name>
<param-value>.xhtml</param-value>
</context-param>
So all *.jsf files are processed and sent to the corresponding .xhtml file.
I have looked up creating custom components on google and every last example uses their newly created components in a jsp file. No XHTML uses so far.
Below are my tld files and xhtml file if that helps:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE taglib PUBLIC "-//Sun Microsystems, Inc.//DTD JSP Tag Library 1.2//EN" "http://java.sun.com/dtd/web-jsptaglibrary_1_2.dtd">
<taglib>
<tlib-version>1.0</tlib-version>
<jsp-version>1.2</jsp-version>
<short-name>u</short-name>
<uri>http://www.fubar.com/tags</uri>
<tag>
<name>ticker</name>
<tag-class>ticker.TickerTag</tag-class>
<body-content>JSP</body-content>
</tag>
</taglib>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml"
xmlns:ui="http://java.sun.com/jsf/facelets"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:t="http://myfaces.apache.org/tomahawk"
xmlns:u="http://www.fubar.com/tags">
<html>
<head>
<title>Show Custom Component</title>
</head>
<body>
<f:view>
<u:ticker> <f:verbatim>Hello JSF Component</f:verbatim></u:ticker>
</f:view>
</body>
</html>
Any suggestions/help are much appreciated,
Nick
</div>

Thanks Ray. I'll take a look at that site.
I managed to figure out my problem. I never created a .taglib.xml file that reference the component I defined in the faces-config.xml file. Once I did that everything work perfectly.
I managed to use this forum post as a guide.
http://osdir.com/ml/java.facelets.user/2006-12/msg00042.html
I hope this helps anyone else.
Nick

HT5557 Create Private Class Library in Ibooks?

I am a teacher, and I have a class set of Ipads #2 (not siri). I want the students to create books in ibooks, and I want them to publish them to ibooks.
I want the students to be able to read each others' books on their own devices and at home or in the classroom.
I do not want the general public to be able to access the books.
How can I create a "private library" in ibooks for my students?
Thank you for any help or suggestions.

It is true that the .NET platform is doing away with DLLs and actually, it's doing away with tradition ActiveX also. It will be based on objects called Assemblies.
If you have an actual ActiveX component, you can call this from both LabVIEW 6.1 and VB6. However, if the object that you have built was built in the .NET environment, then it is an Assembly object. And, since this technology was released after both VB6 and LabVIEW 6.1, neither platforms support .NET controls yet. VB6 will most likely never support Assemblies, although I assume LabVIEW will as future versions are released.
J.R. Allen

Web Crawl: Creat Custom filter specific to sites

Hi,
I have requirment to create Custom Filter to act has NOFOLLOW & NOINDEX operations for some websites;
Means, couple of websites will not have NoIndex or NoFollow info in robots metatags; but this site should act as NoIndex or NoFollow behivour;
- will have list of websites (outlinks) with NoFollow or NoIndex in properties
Tried with HTMLMetatagFilter extensions -
Outlink[] tags1 = parse.getData().getOutlinks();
     for(int i = 0; i<tags1.length; i++ ) {
               String st1 = tags1.getToUrl();
               String urlMask1 = "http://www.aaaaaa.com/ZZZZZZZ.html" ;
          if (st1.equalsIgnoreCase(urlMask1)) {
                    log.info("Inside the URL Mask comparison");
                    tags1[i].skip((DataInput)parse); // This operation is not working
===========================
Pls let me know how to achive this? Many thanks in advance.
Thanks

Frank Nimphius wrote:
Hi,
an ADF library file is a JAR file with a special manifest. It does not merge web.xml files as far as I know
FrankHi Frank,
Thanks for the reply. So is there any possible alternative to this? I think there is some use cases wherein there is a need to supply your own custom filter or servlet for that matter.
Thanks

How can I create a fIlter to delete only "junk" from the server?

One of my E-mail accounts is that of a major client. I handle their customer service online. Normally our protocol is to always leave all messages on the server, so for that one Thunderbird account, I have it set to never delete messages on the server.
But the account recently started getting a lot of junk messages. Thunderbird is doing a remarkable job at marking those and placing them in the junk folder for that account. I would like to create a filter that could remove them from the server, preferably those more than "x" days old so I could monitor the activity to be sure that no important message are removed.
I did notice that in "Filters" I can create a custom filter from a header of my choice, but can't seem to create what I want which is:
- after mail is marked as Junk by Thunderbird to delete those messages from the server if they are older than "X" days (my choice of "X").
- not delete any other messages from the server for that account

I believe that did it! Thank you. I am running those changes on a secondary E-Mail address for the same job and server and it appears to be working properly.

Creating a new library from a DVD Burn library

I have my entire library of photos on my iMac in iPhoto 6.0.6. I recently spent quite a bit of time cleaning up what had been a rather messy, unorganized, photo library. My organizational method consisted of consolidating old film rolls which were inherited from original imports that were in different folders by moving groups of photos into single "film rolls" for older years and making fewer rolls for the last few years. I then went back through and corrected photo dates for a bunch of images that were scanned in, etc. I downloaded Keyword Manager, which I like a lot, and applied keywords to every photo in my collection. I also deleted a bunch of old photos which were too similar to better shots or simply not worth keeping. Once I finished all of this I had my new library consisting of 1892 pictures, which I hoped to backup and allow to serve as a "gold master copy" of all of my photos to date. In browsing the database in Finder, I noted that there were a lot of images in the "Original" folders that were not in the library. Some of these were images I had deleted in the library. (I know better than to do anything through the finder other than browse. I know that to maintain integrity of the library it is necessary to only perform actions through iPhoto.) I did a database rebuild and asked iPhoto to recover orphaned files which did nothing. I really wanted this database to be in pristine condition since I was using it as my master copy, but could not figure out how to do away with old unwanted images in the "originals" folders. I went ahead and created a DVD library with "Share -> Burn", and voila, the new iPhoto Library that was created on the DVD appeared to be "clean" with only the 1892 pictures in my viewable library existing in the Originals folder. OK, so far so good. I then took the DVD I had burned and attempted to replicate my library on my iBook which had a clean install of iLife '06 on it. When I launched iPhoto with the DVD in place it showed me an empty hard drive library and the burned library from the DVD. At first I attempted to just copy individual Film Rolls from the DVD to the local library. While this worked in bring the images over, the keywords became all jumbled. The resulting photos would have keywords attached which did not belong to them and were different from what was on the DVD. I then deleted the iBook library and tried copying the entire iPhoto Library folder from the DVD to the iBook via the Finder. When I relaunched iPhoto, presto all the photos were in my local library with keywords, film rolls and other metadata intact. However in browsing the library I came across a few photos which would cause iPhoto to crash when I tried to edit them. This was a consistent behavior on specific images. Reading through the forums I came across the color profile bug and through testing verified that this was not the problem. Meanwhile back on the iMac I could edit the photos in question with no problem. I verified that the image had not been corrupted during the DVD burn as well. The files are identical between the iMac and the iBook. I know this is a long drawn out post, but if anybody has read this far, here are my questions ...
1) What is the best way to go about creating a "clean" database with internal integrity after a doing a lot of edits and metadata changes? Shouldn't the burn to DVD do what I want?
2) How come when I copied subsets of my library over to a new machine from the DVD, the keywords seemed to get all jumbled? Is it a matter of indexing them? If I added all the keywords to an empty library before copying the images over, would it work? Is there not a way to just copy portions of a DVD library into another library?
3) Any ideas on the crash while attempting to edit problem? The image will load as a thumbnail, and then briefly flas the full size image, before iPhoto crashes and pops up a dialog asking if I want to restart it.
Thanks for staying with me!
Mark

Problems solved with iPhoto Manager's rebuild function! Thanks to Brian Webster of Fat Cat Software. Great program!
Mark

How can I create a filter that automatically copies sent items to other folder than "sent" folder?

I tried to create filter which automatically copies sent to different recipients messages to other folder than "sent". I tried many times with different setting but it doesn't work. With inbox messages it works fine.
Thank you

If you want to 'reply' to an email, but you want the sent reply to auto appear in the same folder of the message you are replying to.
Tools > Account Settings > Copies & folders for the mail account
There is a checkbox to select: 'Place replies on the folder of the message being replied to'
then click on OK to save changes.
If you want all sent emails not just replies to got to different fodlers based on who you sent the email to, then you would need to create a filter which when manually run moves selected emails to specific folders.
So let the sent emails get auto stored in Sent folder.
Tools > Message Filter
click on New
give filter suitable name
Apply filter when: manually run
select 'match all of the following'
To is email address
Perform these actions
Move message to and select the folder.
Do not enable.
When you need to run this filter,
open Message filter.
enable only the filters you require
Run selected filters on: Sent folder on the mail account
click on 'run now'
Best used when you have several sent emails which you need moving.
Not exactly what you are looking for, but works if organising loads of sent emails.

Why is iTunes 11.1 asking me to create a new library every time I open it?

Every time I open iTunes 11.1 I have to load my library file manually...it does not just open automatically. It asks if I want to create a new library or load a previous library each time I open the application. I fixed permissions on my hard drive but it does not seem to help. Also, Safari is acting strange...when I click on a link in a page it downloads the HTML file instead of opening the new link. Lots of quirky stuff happening! Had to restore my HD last night from Time Machine...still acting weird.

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

I uploaded pictures from a second camera and my iphoto created a second library, how do i get back to the first library?

I uploaded pictures from a second camera and my iphoto created a second library, how do i get back to the first library? Can anyone help?

I have no idea what you did or what happened - but I can assure you that loading from a different camera does not create a new library
So you need to supply information and someone here will assist you in sorting this out and figuring out what you really did
What version of iPhoto do you have? What version of the OS? Why do you think that a second library has been created? What do you see when you launch iPhoto with the optipon kep depressed and use the select library option? Where is your iPhoto library normally?
Anything else you can tell us that might help?
LN

How to stop iTunes creating a new library on my hard drive when it can't find the one I have created and told it to use on an external drive?

I have quite alot of music etc so to save hard drive space I have created my iTunes library on an external hard drive. If I ever accidentaly open iTunes when that external hard drive isn't attached iTunes makes a whole new library from scratch on my computers hard drive. I find this highly frustrating as I often open Itunes to find no music as it have changed librarys and I have to re-load my actual library: very frustraiting and time consuming.
I would like to know if it is possible to lock iTunes some how to stop it from changing folders when it can'f find the library, or atleast give me a warning that it can't find the library before creating a whole new one????

Tunes works through a database file which has a list of your tracks. When you click on a track it looks up in the database which file it needs to play, then plays the file. If something breaks this link then you get ! The two main ways to get ! are to move a file from where iTunes expects it to be, or to delete it altogether. I don't know which has happened in your case. You can try using Spotlight to find a file for the one referred to in a broken link. If the files have been moved then they need to be moved back. If they were deleted completely you will have to restore them from a backup or download them again from the iTunes Store and rebuild your library.

Can i use a 2nd iphone if i install itunes on another user account.when i tried to create a second library i messed up both phones, the second one now has all my contacts and when it sends txts it either says its my other phone or email address

can i use a 2nd iphone if i install itunes on another user account.when i tried to create a second library i messed up both phones, the second one now has all my contacts and when it sends txts it either says its my other phone or email address. i can cope with the first phone and getting it back on itunes but dont want to syn the 2nd phone until i know it is independant of the other one. Does it matter that both phones use the same itunes store account?

Deleting the account on your phone only removes if from your phone. The account and it's data remain intact and doing so will not effect your daughter's phone.
To do this, first go to Settings>iCloud on your phone and turn any synced data (contacts, calendars, etc.) to Off, and when prompted, choose to keep the data on the phone. When finished, scroll to the bottom and tap Delete Account. Then set up a new iCloud account with a different Apple ID and turn any data you want to sync with iCloud (contact, calendars, etc.) back to On. This will upload your data to your new iCloud account.

How to create a filter based on Effective date EFFDT

Hello to all,
I am currently creating reports from an HR database that stores records by employee (EMPLID) based on effective date(EFFDT) and Effective Sequence (EFFSEQ).
It is easy to get a report that shows all entries up to a certain data (using <= or >=), however, I am not able to create a Filter (in the report or in the prompt)
that shows me the MAX(EFFDT) up to a certain data dd/mm/yyyy. (any one)
The sql script we use is the follwiing
SELECT A.EFFDT, A.EFFSEQ, A.ACTION, A.EMPL_CLASS, *
FROM PS_JOB A
WHERE A.EMPLID=' ' ----*(PROMPT1)*
AND A.EFFDT=(SELECT MAX(B.EFFDT) FROM PS_JOB B
WHERE B.EMPLID=A.EMPLID
AND B.EFFDT<=' ') *(PROMPT2)*
AND A.EFFSEQ=(SELECT MAX(B.EFFSEQ) FROM PS_JOB B
WHERE B.EMPLID=A.EMPLID
AND B.EFFDT=A.EFFDT)
Do I need to create a variable? If yes, How?
Please send me your suggestions or past experiences with BI on the subject.
Thanks
Roberto

Hi Roberto,
I would create a session variable via the Oracle BI Administration Tool.
See the following of how to achieve this:
http://download.oracle.com/docs/cd/E12096_01/books/admintool/admintool_Variables4.html
Reference this variable in your filter. It looks something like this VALUEOF(NQ_SESSION."VARIABLE_NAME")
Good Luck,
Daan Bakboord

How do I create different iTunes library for different Iphones in a family

how do I create different iTunes library and Syncing Iphone separately using same desktop PC?

The best way to set it up in my opinion is to have each user have there own user account on the computer. This way information is stored separately and easier to locate and navigate through.
If you want to have it this way but would rather go through and log into different iTunes libraries on the same user account follow this article. If you do it this, it would work the same you just want to make sure the correct library is open before syncing the device.
http://support.apple.com/kb/HT1589
Hope this helps!!

Creating Sawtek filter library component

Similar Messages

Maybe you are looking for