Creation of Asset Master in Goods Receipt

Dear All,
Is there any possiblities to create Asset Master during Goods Receipt Process.  The Scenarios is the user did not want to create Asset Code during or before creation of Purchaes Order and we need the system to create the Asset with Sub number in Goods Receipt.
Please help.
Regards,
Suresh

Hi
I dont think there is a possibility, you need to give true account assignment in creation of PO.
Thanks

Similar Messages

  • Quantity not updated in Asset master after Good Receipts

    Hi,
    Can someone tell me is it SAP bug after Good Receipts done, base on the following scenarios, if PO specify with Quantity 1 and unit of measurement PC:
    1) Asset created without specifiying the quantity and unit of measurement
    2) Asset created with specifiying the quantity and unit of measurement, ie Quantity : 1, Unit of measurement: PC
    3)  Asset created with specifiying the quantity and wrong unit of measurement, ie Quantity : 1, Unit of measurement: Unit
    The result:
    Item1: No quantity and unit of measurement in Asset Master was updated.
    Item2: Quantity was added by 1, ie total is 2 in Asset Master
    Item3: No changed in Asset Master, since wrong unit of measurement.
    Is it bug for the item1 & Item2?
    Thanks

    Refer the note 421308
    Regards
    Sreenivas

  • IDOC Types for Purchase Orders, Vendor Master and Goods Receipt

    Hello All,
    Can any have idea about the IDOC Types that can be used for triggering when the actions creation/change/deletion on Purchase Orders or Vendor Master or Goods Receipt is performed?
    Please let me know the names of IDOC Type, Process Codes, message type... and all the other required information...
    Thanks in Advance,
    Kumar.

    Hello Ferry,
    Thanks again for the IDOC Types. I have another question. Can we use those IDOC types for creating/changing/deletion of Purchase orders or Vendor Master or Goods Receipt happens? I mean can we configure in such a way that when ever there is a change or deletion of PO or VM or GR happens?
    I have got to know about the IDOC PORDCH01 which can be used for Purchase Order. Can u suggest me which can be used for PO's?
    Regards,
    Phani.
    Message was edited by:
            Sivapuram Phani Kumar

  • Automatic creation of purchase orders at goods receipts

    Dear guru ,
    I want to create purchase order when i execute GR Returns (mvt 161).
    Where I define the purchase order document type that I want to automatic create ?
    Thanks.

    Dear,
    Before configuration of setting for creation of Purchase Order automatically, consultant needs to under stand the business requirement and he should be aware of the difference between the different components of Material Management. Such as difference between creation of purchase order automatically in Purchasing and creation of purchase order automatically in Inventory Management. In SAP we can take this activity in both the sub components (Purchasing as well as in Inventory Management).
    By this time, I hope that you have understood that there are different settings for each of these components and we have to configure two different set of information to meet each requirement separately. Hence let me define this activity as follows:
    Create Purchase Order Automatically in Purchasing
    For creation of purchase Order automatically from Purchase Requisitions we need to do the following additional settings in addition to our standard ones.
    Activate u2018auto PO' indicator for material master
    Activate u2018auto PO' indicator for vendor master
    Create Purchase Requisitions using T Code ME51 or ME51N
    Use T. Code ME59 or ME59N for auto conversion of PR into purchase order
    Create Purchase Order Automatically in Inventory Management
    For creation of purchase Order automatically in Inventory Management we need to do the following settings which are independent of the setting what we do in Purchasing for creation of automatic PO from PR.
    Define one of the purchase organizations as Standard Purchase Organization
    Assign your plant to Standard Purchase Organization
    Maintain purchasing information record with price
    Maintain the indicator for movement types 101 & 161
    Define Default Values (MB01) for Document Type
    Now you can enter a goods receipt without entering the purchase order number, a purchase order will be created automatically when you post the goods receipt. All such goods receipt will be valuated at the price maintained in the purchasing information record.
    First you can try this with T. Code MB01 if it is working then try with T. Code MIGO, if you face any error or functionality is not working check with your basis consultant some authorization or some patches may be missing. Ask him to apply all relevant patches.
    Try using automatic PO for 161 movement for transaction MB01. For MIGO Goods return, its not allowed to create automatic PO due to system settings. This info as I know.
    Regards,
    Syed Hussain.

  • Automatic creation of transfer orders from goods receipt of purchase order.

    Hi experts
    The project i am currently working on requires the following;
    When goods receipting a purchase order i have a requirement for the system to create automatic transfer orders to put the stock away into storage bins.  I am aware that the stock goes straight into the 902 area once goods receipted.  Is it possible to have the transfer orders created automatically out of 902 once the goods receipt has been posted.
    In support of this, i have made an entry in transaction OMKX for the following;
    Reference Movement Type - 101
    Movement Indicator - B (goods movement for purchase order)
    Movement Type - 101
    TR Create Transfer requirement - X
    Immed. TO Creation - A
    Addl Data - X
    Once i receipt the PO it just sits in 902 and does not create any automatic transfer orders.
    Could someone please help me
    Thanks
    Simon

    Please try to process the material document of the GR manually by LT06 in foreground to find out the root cause of the error.
    You may also want to setup the mail control (V_T321-MAILK) for immediate TO creation in OMKX. The system will send you a express message (depending on your setup) if TO creation is failed.

  • Creation of Asset Master

    Dear All
    A very good morning.
    My problem is that when I create the asset master through AS0, in the Depreciation Area tab all the fields viz.Book depreciation, dummy 1 etc appear in white ie they are changeable by the user.
    I want to select a sreen layout in which these fields turn grey & cannot be changed by the user.
    Can you please help me on this.
    Thanks
    Saurabh Bagri

    Hi Pushkaraj,
    Thnx for ur reply.
    In the screen layout, the depreciation key is specified to be a madantory one with no check box for display.What should be done in such a case.
    More so when i try to come out of this screen the system gives a message "Specify maintanence level" & dosnt allows me to quit. Can you explain this to me .
    Regards,
    Saurabh Bagri

  • Control on creation of inspection lot during goods receipt against process

    Dear Friends,
    When goods receipt against process order  of say quantity 100 Kg is done in PP, inspection lot for the same of origin 04 is created in QM.
    My requirement is that PP should be able to post 90 Kg in quality inspection and remaining 10 Kg should directly go to
    reserve sample without coming in Quality.
    Is it possible?
    I have tried by changing material master record in MM02 for inspection set up data. But it is not serving the purpose.
    Thanks in advance,
    Regards
    Vrish

    Hi,
    04 type of inspection is GR at the time of Production Order.
    Whenever you do the production order quantity, an inspection lot is created. It will be created for full quantity which you are confirming (i.e. 100 kg will be considered and not 90 kg).
    This material will be Quality Inspection.
    You have to do Result recording and give usage decision.
    While giving usage decision, you can allot 90 kgs to Unrestricted and 10 kgs can go as Sample what you desire.
    Hope this will solve your issue.
    Srini

  • Automatic Creation of Purchase order during Goods Receipt

    Hai Guys,
           Can you please tell me is there any ways to get a Automatic PO during Goods Receipt???
        Regards
        Jino.

    Config
    1.Automatic PO generation must be activated for the movment type in IMG>Inv Mgmt & Phy Inv> GR>Create PO automatically. ( Note that automatic PO is only possible for mvmt 101 & 161)
    2. The plant you are working with must be assigned to a standard purchase organisation.
    3. A default PO document type must be specified for the GR in IMG> MM>purchasing>specify default vaues for document types.
    Master Data
    1.In mateial master Auto PO is to be set.
    2.in Vendor Master Auto PO generation or agreed with him an indicator is to be set.
    3.Info-Record should exist with the combination of material,vendor and the auto PO flagged in info record.

  • Problem with the creation of asset master record

    Hi Gurus,
    i am having problem in creation of a new asset master with the use of existing man asset number and different asset sub number. I am trying to create the asset in the same company code but different depriciation area, but the system is not allowing me to do that. Is there a setting in the SPRO by which I can allow the use of creation of the asset number by using the already existing asset number with the new asset sub number. This is actually happening in the system for one type of equipments but not for other.
    Can any one tell me what settings are to be made to allow this for all containers.
    Thanks in advance
    Anoop Sharma

    Hi,
    A sub asset master can be created with AS11 only.
    You cannot create a asset sub number under a main asset number, in the case, where different set of dep areas needs to be maintained.
    When you create a sub asset, all the dep areas will be copied to sub asset's master from main asset master. Since this set of dep areas cannot be different from main asset to sub asset.
    Hopw you understood this.
    Thanks,
    Srinu.

  • Account Assignment from Material Master or Goods Receipt Document..

    We are on ECC 6.0 instance.
    For Vendor Cash Discounts we have all the postings going to a default cost center set up as the default account assignment in the cost element master. Because of the default cost center, the  postings are going to the profit center on the default cost center. But the segment getting populated at the line item level is not in line with the segment on the default PC.
    This segment is actually the one which is in line with the Profit center in the account assignment on Goods Receipt/Material document or the PC on the Material Master.
    Can someone please clarify where this segment would be coming from - from the material master or from the good receipt aka material document?
    Edited by: Pete on Jul 22, 2009 3:51 PM

    Hi,
    In material master you have assigned a profit center and all good movements will post to profit center,which is assigned to materials.in profit center you have assigned a SEGMENT.so automatically all profit center postings will post to SEGMENT.
    Hope this helps you.
    Thanks,
    Anusha

  • Creation of asset master data

    hi sap gurus,
    i have a problem regarding saving of asset master data.
    while creating asset master data,-in time dependent tab the cost center it is comming correctly.but when i am saving it is giving ,the following error:
    you cannot save the asset(correct depreciation error)
    Diagnosis: you have choosen the function save.the system found an
    internal problem when calculating depreciation for a check document.
    sys responce:The asset cannot be created
    procedure:1 check the error from depreciation calculation by
    performing the function "Test doc.'again.
    2 if you cannot correct the error ,contact your sys specialist.you
    must then cancel your current processing.
    please help me regarding the problem......

    hi
    check your depreciation area settings for the asset class

  • Date error during creation of asset master using bapi

    Hi All,
    Am creating asset master using BAPI_FIXEDASSET_OVRTAKE_CREATE ,,
    but am getting date problem while passing value  '21022005'  ( or any date )  in the format  'ddmmyyyy' 
    the error says 'the capitalization date is invalid' ....
    the capitalization date is under  the structure BAPI1022_FEGLG002 of the above mentioned bapi....
    even i have tried using '21.02.2005' its still not working as the capitalization date is 8 char...
    kindly help me out with the possibilities
    thanks
    john

    Hi John,
    Some of the structures you have to fill for the IDOC belongs to a  referencing ...X structure. For example structure BAPI1022_FEGLG002 and BAPI1022_FEGLG002X.                                                                               
    When you fill the capitalization dat (BAPI1022_FEGLG002-CAP_DATE = '19981231') it's necessary to fill the corresponding field (BAPI1022_FEGLG002X-CAP_DATE = 'X') to  specify that the content of the field should be transferred to the fixed asset. Otherwise it'll be not transferred and you'll get an error message instead.                                                 
    Regards Bernhard

  • Automatic creation of asset maste

    I want to know how to configure this:
    when I created a project ,an asset master would be automatically created.
    best regards

    IM- PS ingetration is based on Investment profile. When Release status is set on Investment profile carrying WBS based on setting system will create AUC. Reqeust you to search in forum / Read SAP Help on IM ; you will get relevant information.
    With Regards
    Nitin P.

  • Creation of Assets master Data

    Dear All,
    Now we need to upload master data for Asset materials, which we are treating as UNBW Mat type (Non valuated materials). If we want to sell it after 1 Year & then what is the procedure ?  In UNBW mat type there is no sales views maintained.
    pls exp me
    regds,
    Channa

    hi,
    Do try to create the new material type with your specified view, you may also copy the exisisting the mataerial types, so that the you can get few of the default settings automatically and for few you can make changes...
    Regards
    Priyanka.P

  • Asset master creation (run time error)

    Dear all
    I am facing problem with  asset accounting at that time creation of asset master getting to  run time error message
    Error message: GETWA_NOT_ASSIGNED
    Fields symbol not yet been assigned(segment 32770)
    Thanks & Regards
    suresh
    Edited by: prasad y on Jul 5, 2011 3:23 PM

    Dear:
                  Please check notes, they have to be implemented in the system
                   992846
                   988238
                   Regards

Maybe you are looking for