Creation of Multiple Similar Assets

Hi experts,
I need to ask if following is the best that can be done for splitting few assets of one class to another class or is a better solution exists for it Or is there any transaction/report that can create Multiple Similar Assets?
Currently, we have one asset class in which assets of two categories are created. We now need to split them to individual classes. For that we researched on how to transfer one category of multiple assets within a Company Code and found that there is a possibility of tranferring multiple assets through txn ABUMN.
The problem arises that we can only transfer asset to existing ones when the case is 'Multiple Assets Transfer', while we can create new Asset when the case is 'Single Asset Transfer'. WorkAround that we found is to first create Similar Assets in new Asset Class, record it and do it through LSMW for creation of assets in bulk.
Hope if anyone went through such situation and like to share his experience
Thanks for reading

Hi
I did not have such experience earlier but sure your workaround is perfect. Goahead. Transaction code ABUMN is mainly for such transfers and/or asset class adjustments
Cheers
Srinivas

Similar Messages

Block creation of multiple prod. order against single sales order in CO08

Hi All,
We have a requirement of blocking the creation of multiple production order against single sales order in CO08 if the production order is already created for that item.
How to achieve this?
SmanS

Hi,
you need to check if any user exit is there which will check order haeder table for the said sales order if any Prod Order exist for the same and flag custome error whicle prod order save.
Pls revert if you need any further information.

Creation of an Old Asset

Hi All,
Our Company had purchased some similar assets about two years back through direct purchase. But the company did not create any asset master record for those assets and even did not calculate the depreciation. But these assets are now under operation .
Now the company wants to bring those assets into the SAP system and provide the depreciation for last two years. But the last year had closed.
How do I treat this issue?
I request you to all, please provide your valuable opinion.
Thanks with regards,
Ran

Yes you can follow the steps suggested by Dominic.
You can also do the following -
Go to ABNAN, and from there you can create the Asset master.
So you can use this transaction for both posting the Value of the Asset and also creating a new asset.
Thanks
AK

Creation of Multiple Shipments with respect to Single inbound.

Hi,
This is regarding creation of Multiple Shipments with respect to Single inbound.
In standard SAP, you can create Shipment cost based on Inbound number.Requirement is here for single inbound can we create multiple Shipment document.
Can we do shipment costing for Multiple shipment in single document through VI01.
Yours Help in this will be highly appreciated.
Regards
Sunami.

dear friend,
to process shipment cost documents you can either call up a shipment cost document in change mode or you can create lists of the shipment cost documents
you can create the following lists:
-Shipment cost documents for calculation
-Shipment cost documents for settlement
to process a single document use t-code VI01
to create lists of shipment cost documents to be changed use t-code VI11
so, if you need something very special you would think about the new enhancement...
good luck!

Restrict PO creation for multiple plants for same company code

Hi Gurus,
We want to restrict PO creation for multiple plants in the same company code. Based on Standard SAP settings for Purchasing organization assignment with multiple Plant and multiple Plant assignment with single company code, this is happening. Is there a way that we can restrict by doing some customization change.
Any thoughts or ideas will be highly appreciating.
Thanks and Best regards,
Karun Kumar

Hi,
Said functionality is not available in SAP standard.
To avoid the same ,i can suggest implement release strategy for PO,and then higher authority / commercial team can check created PO,if multiple plants available in single po then they have the option of rejection for the same.
Or else check BADI-ME_PROCESS_PO_CUST,take the help from abapor and apply the restriction to select multiple plant in PO.
Hope this will resolve your query,
Thanks & Regards,
Sandesh Sawant

Create ecatt script for one sales order creation with multiple line items

Hi ,
I want to create a ecatt script for one sales order creation with multiple line items. Preferably SAP GUI.
This selection of data will be from an external file/ variants which will have only one row of data in it.
Firstly: I have to sort the external file having same PO Numbers in an order.Group them together.
Second: I have to create sales order for those many line items having same PO Number.
Best Regard
Taranum

Hi Micky
Firstl you should upload the Line items for a particular sales Order in an Internal table
and then pass that internal table to your BAPI during your coding corresponding to a particu;lar sales order
In case of any issues pls revert back
Reward points if helpful
Regards
Hitesh

Creating multiple similar pages in DW

Hi there,
I'm trying to create multiple similar pages in DW. It's no funky stuff, just I've got a lot of videos (clean stuff) that I wish to display, one video per page and I've got like a 1000 videos or so.
Example:
http://goo.gl/KqdXp
Now, creating a copy of the page, changing the name and changing the fields in the code for every single page would be an option but would take forever. I wonder if there's a function in DW to automate the process, like creating page after page with only a certain part of the code differing.
I really need to automate this or my fingers will start bleeding.
Kind regards
Pongy
Contact Details: http://goo.gl/wRVT6

Yes, I was thinking about creating some sort of database first but as a matter of fact it might just be a better solution to create 1000 pages in this case because I would like to be able to customize each page individually when the need occurs.
I mean creating a thousand pages is relatively easy per se, it's just that I would like this tiny piece of code to differ between them... I guess DW perhaps does not have a built in function to do this... I was looking to other solutions like Drupal or Joomla but I'm sort of accustomed to using DW for web editing needs and if possible I would like to stick to the same platform that I'm used to rather than engulfing lots of new info about CMS systems... And databases, which I haven't been working a lot with.
Obviously, creating a 1000 pages might seem brutish at first but I've been thinking about it for a while and I think it could actually suit my needs.

Number of similar asset - AS01

Hi
When we create asset master, we enter some number for example 2 or 3.. in the number of similar asset field. The system create asset numbers but there is an opportunity to change only the following fields for each asset
- asset description
- invetory number
- cost center.
we need to include some other fields apart from the above. Where can I configure this?
Thanks
Ashok

Hi
Did you check screen layout rules of Asset Master at
SPRO-Financial Accounting-Asset Accounting-Master Data-Screen Layout-Define Screen Layout for Asset Master Data
and
SPRO-Financial Accounting-Asset Accounting-Master Data-Screen Layout-Define Screen Layout for Asset Depreciation Areas
Cheers
Srinivas

Creation of Multiple assets

Hello,
I'm creating assets using BAPI BAPI_FIXEDASSET_CREATE1
Even i have to create Multiple assets.
could u please tel me which BAPI u used to create multiple assets.
Thanks,
Shabari Raut

Hi
I did not have such experience earlier but sure your workaround is perfect. Goahead. Transaction code ABUMN is mainly for such transfers and/or asset class adjustments
Cheers
Srinivas

Using the same Asset Master Record for similar assets

Dear all,
I would like to ask if it is possible to use the same asset master record for multiple assets which are similar. The assets will be posted in different periods / fiscal years and therefore the depreciation would change and be charged according to the useful life of the individual assets posted to the same master record and which in turn will vary according to periods / fiscal year posted.
For example, an asset master record is created for Vehicles. The 1st vehicle with a useful life of 4 years is depreciated at the start of the year for 4 years. The second vehicle is purchased on 6 months after on the 1st June using the same asset master record. However the depreciation is not worked out over the same useful life of the previous vehicle but is extended for a further 6 periods. Is this possible and how is it done.
Many thanks for any feedback and help.
Thanks
PRG

Dear Peter
What is the issue in case you created separate Asset Master for each Vehcile ? Is there any specific need for you to accommodate all the assets in one single asset master ?
I don't think it is correct method as per Company's Act. Over and above, how would you plan for the Fixed Assets Register in the given situation ?
Regards
Gemini

Creation of equipment using asset

Dear Experts,
I am very new to SAP PM. I have one query regarding the creation of equipment master automatically by asset master scenario is as below..
I have created one asset master in which asset quantities are 10 in one asset master, I have synchronize asset master with equipment master in FI configuration. I am getting only one equipment master for that asset master but I want maintain above mentioned 10 asset separately so I want 10 seperate equipment for same.. Please tell me how can do this
Thanx .
Regards,
ABC PM

Thanx Yawar,
I have activated that setting & I am getting one equipment for one asset master. but in my scenario in one asset master there are 10 quantities of asset & to maintained them separately I want to make 10 seperate equipment master.. so hw can I do that???
Regards,
Parag.

BAPI for automatic Pr creation witth multiple files from excel sheet

I have written a programm for automatic PR creation with the help of bapi , where its picks data from excel sheet and makes PR .It is picking excel files from one folder(Files) for PR creation and moving to another folder(Files sucess).
now the problem is if Folder (Files) contains one excel sheet ,PR is created fine , but if the Folder(Files) have multiple excel sheet ,its is creating 1st PR right, but next PR's contains all the line item of 1st PR , 2nd PR and so on .can anyone suggest me where is the problem in codes.
types : begin of x_file ,
        key1(10),
        pur_grp(4),
        maktx(40),
        plant(4) ,
        req(10),
        s_qty(13),
        wbs(24),
        gl(10),
        trackno(10),
        supl(4),
        deladd(255).
types : end of x_file .
data : str5 type char10.
data : mm type char2.
data : yyyy type char4.
data : dd type char2.
data : str9 type char10.
data : str6 type char10.
data : month type char2.
data : year type char4.
year = sy-datum+0(4).
month = sy-datum+4(2).
dd = sy-datum+6(2).
yyyy = sy-datum+0(4).
mm = sy-datum+4(2).
dd = sy-datum+6(2).
clear str6 .
clear str5.
concatenate dd'.' month '.' year into str5 .
concatenate yyyy mm dd into str6 .
DATA : file type rlgrap-filename .
data : it_file type table of x_file .
data : wa_file type x_file .
data : it_header type table of x_file .
data : wa_header type x_file .
*& Internal Table For Define Row and Coloum Postion
data: col_start type i value 1 ,
      row_start type i value 2,
      col_end type i value 256 ,
      row_end type i value 65000 .
*& Internal Table For Retrieve Data From Excel
*data: excel_bdcdata like kcde_cells occurs 0 with header line.
*data: excel_bdcdata1 like kcde_cells occurs 0 with header line.
data: excel_bdcdata like ALSMEX_TABLINE occurs 0 with header line.
data: excel_bdcdata1 like ALSMEX_TABLINE occurs 0 with header line.
data: it_index type i.
DATA : IT_INDEX1 TYPE I.
*& Define Field Symbol
field-symbols: <fs> .
data :   bdcdata like bdcdata    occurs 0 with header line.
data :   messtab like bdcmsgcoll occurs 0 with header line.
data : req_items type table of bapiebanc .
data : wa_req_items type bapiebanc .
data : req_acc_asg type table of bapiebkn.
data : wa_req_acc_asg type bapiebkn.
DATA : RETURN LIKE BAPIRETURN OCCURS 0 WITH HEADER LINE .
*data : return type table of     bapireturn.
*data : wa_return type bapireturn .
data : number type ebeln .
*****************************MOVE FILES******************************
data : xsource type string .
data : xdestin type string .
data : destin1 type string .
data : destin2 type string .
DATA : DEST1 TYPE STRING.
DATA : DEST11 TYPE STRING.
DATA : DEST2 TYPE STRING.
DATA : DEST22 TYPE STRING.
data : sou_dir_name like SALFILE-LONGNAME.
data : tar_dir_name like SALFILE-LONGNAME.
data : tar_dir_name1 like SALFILE-LONGNAME.
data : sou_filename like EDI_PATH-PTHNAM .
data : tar_filename like EDI_PATH-PTHNAM .
data : filename1 type string .
data : tar_filename1 like EDI_PATH-PTHNAM .
data : file_itab like SALFLDIR occurs 0 with header line.
data : wa_file_itab like SALFLDIR.
data : file_count type i .
data : dir_count type i.
data : dir_table like sdokpath occurs 0 with header line.
data : file_table like SDOKPATH occurs 0 with header line.
data : wa_file_table like sdokpath.
data : strr type string ,
       str1 type string ,
       str2 type string ,
       str3 type string .
DATA : PA_VAL TYPE CHAR1.
sou_dir_name = 'D:\barcodes\files\'.
tar_dir_name = 'D:\barcodes\files-success\'.
    "success folder.
CALL FUNCTION 'TMP_GUI_DIRECTORY_LIST_FILES'
EXPORTING
    DIRECTORY = sou_dir_name
    FILTER     = '.'
IMPORTING
    FILE_COUNT = file_count
    DIR_COUNT = dir_count
TABLES
    FILE_TABLE = file_table
    DIR_TABLE = dir_table
EXCEPTIONS
    CNTL_ERROR = 1
    OTHERS     = 2.
IF SY-SUBRC <> 0.
ENDIF.
loop at file_table into wa_file_table.
clear : strr , str1 , str2 , str3 .
strr = wa_file_table-PATHNAME .
concatenate sou_dir_name strr into str1 .
concatenate tar_dir_name strr into str2 . " success
concatenate tar_dir_name1 strr into str3 .         " failed
FILE = STR1 .
*start-of-selection.
*& Function For Retrieve Data From Excel
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
    filename                      = FILE
    i_begin_col                   = col_start
    i_begin_row                   = row_start
    i_end_col                     = col_end
    i_end_row                     = row_end
tables
    intern                        = excel_bdcdata
EXCEPTIONS
   INCONSISTENT_PARAMETERS       = 1
   UPLOAD_OLE                    = 2
   OTHERS                        = 3.
IF sy-subrc NE 0.
WRITE : / 'File Error'.
EXIT.
ENDIF.
loop at excel_bdcdata.
    translate excel_bdcdata to upper case .
    move excel_bdcdata-col to it_index.
    assign component it_index of structure wa_file to <fs> .
    move excel_bdcdata-value to <fs>.
    at end of row.
      append wa_file to it_file .
        clear wa_file.
    endat.
endloop.
sort it_file by key1. "pur_grp maktx plant .
it_header[] = it_file[].
delete adjacent duplicates from it_header comparing key1 pur_grp maktx
plant .
data : h_item(5) type n .
data : h_pack(10) type n .
data : line_no(5) type n .
data : ln_no(5) type n .
loop at it_header into wa_header .
ln_no = 1.
h_item = h_item + 10.
h_pack = h_pack + 1.
wa_req_items-preq_item = h_item .
wa_req_items-doc_type = 'BOM'.
wa_req_items-pur_group = wa_header-pur_grp .
wa_req_items-MATERIAL = wa_header-maktx .
wa_req_items-plant = wa_header-plant .
wa_req_items-pckg_no = h_pack .
wa_req_items-deliv_date = str6 .
wa_req_items-item_cat = '0'.
wa_req_items-acctasscat = 'P'.
*wa_req_items-distrib = '2' .
**wa_req_items-gr_ind = 'X'.
wa_req_items-ir_ind = '2'.
wa_req_items-purch_org = 'TISL' .
wa_req_items-QUANTITY = wa_header-s_qty.
wa_req_items-PREQ_NAME = wa_header-req.
wa_req_items-SUPPL_PLNT = wa_header-supl.
wa_req_items-trackingno = wa_header-trackno.
append wa_req_items to req_items .
clear wa_req_items.
wa_req_acc_asg-preq_item = h_item .
wa_req_acc_asg-g_l_acct = wa_file-gl .
WA_req_acc_asg-wbs_elem = wa_header-wbs .
append wa_req_acc_asg to req_acc_asg .
clear wa_req_acc_asg.
h_pack = h_pack + 1 .
endloop.
clear ln_no .
***BREAK-POINT.
*& BAPI FUNCTION
call function 'BAPI_REQUISITION_CREATE'
importing
   number                               = number
tables
    requisition_items                   = req_items
   requisition_account_assignment       = req_acc_asg
   return                               = return .

Can someone please give me sol........

Creation of multiple geometric template

i have various templates and want to create a multiple geometric template file
i am unable to do it.
i have uploaded the templates
please help me with it
-$hiv@
Solved!
Go to Solution.
Attachments:
five(OK).png ‏342 KB
five3(OK).png ‏269 KB
five4(OK).png ‏1694 KB

Both geometric matching techniques rely on curves extracted from image to perform the matching. The two geometric matching techniques differ in how the curve information is used to perform the matching. The edge-based geometric matching method computes the gradient value of the edge at each point along the curves found in the image and uses the gradient value and the position of the point from the center of the template to perform the matching. The feature-based geometric matching method extracts geometric features from the curves and uses these geometric features to perform the matching.
You can find more detailed information in the NI Vision Concepts Manual here:
http://zone.ni.com/reference/en-XX/help/372916L-01/nivisionconcepts/geometric_matching_technique/
The article also explain when it is better to use one versus the other.
I couldn't test the templates yesterday, because you did not attach a match image.
I might be wrong, but another thing I noticed is that it looks like you thresholded the images prior to extracting the templates. In general, algorithms that need to extract edges from images, such as geometric matching, will work better when you provide them with the grayscale image, as opposed with a thresholded image. The contour extraction will be more accurate. Also, the algorithm does not only use contour information, but also grayscale information of the image. By thresholding the image, one removes a lot of information that the algorithm can use.
On a last note, combining templates into one is only going to help with speed. If speed is not an issue in your application, you can still learn with Edge Based matching and match all template. If there is a match, the character/number you looked for is the right one.
Another solution might be to use a reverse technique, still using Edge Based matching that seems to work better in your case. We sometimes use it to solve classification applications similar to what you are trying to do:
Instead of learning multiple templates and trying to locate them in your image, take the opposite approach: create a synthetic image that contain your templates (all rotated 1s on one line... all rotated 5s on another line etc). Then if you can locate and extract the number (using blob analysis) on the original image, you can extract that region, learn it as a template, and look for it in the synthetic image. The line you find it indicates which digit it is.
Again, this technique might work if you can extract the digit you're trying to identify from the original image. Performance wise, it is only interesting if learning the extracted digit on the fly is faster than trying to match all the separate templates (learning takes more time than matching).
It looks like you're trying to perform OCR on the image. Again, if the text is always located at the same place and you can draw a region of interest around it, you can try the OCR algorithm and define different classes that have the same label for the different rotated digits.
I tried to give you different possible approaches. Hope that was not too confusing.
Best regards,
-Christophe

Creation of multiple inspection points

Hello experts,
I try to figure out how to create multiple inspection points for one operation at process order release.
It means that the release of the process order triggers:
- inspection lot creation (lot origin 03)
- inspection points creation for operation with inspection characteristics assigned to it
In the recipe header, I entered inspection points = 150 - generated inspection point, qty or time
(module function QAPP_CUST_IP_CREATE is activated for "automatic creation of insp. points")
In the operation header, I select time related -and enter 1 HR
However no inspection point is created at process order release. Only inspection point identifier is created automatically when I select the next inspection point in TR QE51N.
Do you have any tips on the subject ?
Thanks in advance
Best regards
Amaury

Dear Amuary
Doubt if there is any solution in standard. Use exit so that thr first 3 inspection points gets activated quickly. Try these exits
QAPP0001
User exit QAPP 1 (create inspection point)
| QAPP0002 |User exit QAPP 2 (create inspection point & other data)
Regards
Gajesh

Transfer Prior Year Asset to Multiple new assets

Hello friends,
We are required to breakdown one of our large Expansion Machinery Assets to multiple assets to reflect the main equipment purchased for the project.
There is a transaction in SAP (ABUMN) Transfer with-in Company Code. I think this transaction will work OK, EXCEPT for the following issue:
The Old Asset currently has a book life of 8 years. When we break this asset down, there are a few peices of equipment that we would like to depriciate at 12 years.
If we use Transaction ABUMN (Transfer) the transation will automatically move the % of depr allocation to the $ transfered based on book life of the old asset (8 years). What this will do is show the new asset (that has a book life of 12 years) as being over depriciated.
When this project is completed and the assets have been changed, I would like to show an adjustment in Depriciation Expense.
I am not sure as to which transaction ABAA or ABMA to be used to adjust the depreciation. Or is that I need to tackle this differently.
Please advise.
Regards
Umesh Gothankar

Dear Friends,
Thank you for spending time on my request. As a solution. I have used write-up in Asset Accounting to adjust the additional depreciation which was generated due to change in the useful life of Asset. I have still not done the changes in production system. Can anyone of you please confirm what I have done is correct. so that I can replicate this in our production system.
Regards,
Umesh

Creation of Multiple Similar Assets

Similar Messages

Maybe you are looking for