Creation of Runtime version for Knowledge base

We are using a Configurable material (CM1) with profile (P1) assigned to it. The profile assigned has the following details (in tx cu42):
. a. Config parameters Sales order
. b. BOM explosion Single level
As per SAP The Single-Level BOM Explosion setting is not supported when configuration Engine is used. But in our R/3 system, the configuration profile used has a setting for Single level BOM explosion (point b written above).
So while creating the Run time version for the KB (for material CM1), an error message comes Configuration profile P1 for material CM1 is invalid for Cause 1 - The setting is Single level BOM explosion
Please help how can the issue be resolved?

Hi Saurabh,
the only resolution is to change the configuration profile to multi-level explosion.
Michael

Similar Messages

Configurable Products : Errors in creation of runtime version of the KBs

Hi All,
While creating run-time versions for the knowledge base objects, I'm encountering several warnings/errors. A few of those are:
1. Config. profile invalid because it is maintained for single-level BOM explosion which is not supported in SCE. Any workaround for this apart from changing the single-level BOM option in config. profile?
2. Object Characteristic XXX not supported in any IPC scenario.
3. Object characteristic Z_VBAK_VBELN supported in IPC scenarios 1,5
4. Characteristic Z_NO_INPUT: SCREEN_DEP-NO_INPUT only supported as of IPC 3.0
5. Characteristic XXX not assigned to a class.
6. Procedure XXX to characteristic YYY is not supported.
7. No Config. Profile exists for material XXX (appl:YYY, class type:ZZZ) - Although the profile has been mainatained.
8. Action XXX to characteristic YYY - value not supported. Where are the actions assigned to characteristcs or characteristic values?
Please suggest the resolution for these errors/warnings. If there is any comprehensive guide or help for these issues, do let me know.
Thanks in advance,
Vishal

Hi Saurabh,
the only resolution is to change the configuration profile to multi-level explosion.
Michael

CU34 Creation of runtime version

Hi,
I want to know how CU34 transaction works properly?
I am trying to create a run time version using this transaction using a knowledge base object and a version.
Material BOM having configurable material and within BOM we have nested BOMs.
I execute with status = 1(released) and plant along with BOM application PP01.
Also some of the material having Spceial procurement production key which is actually does work when you see that in run time version log in CU43 tcode.
Any clue is apprecited,
Regards,
Dipak

Hi Saurabh,
the only resolution is to change the configuration profile to multi-level explosion.
Michael

Help with Workspaces Development for Knowledge Base

Dear Engineers,
We are planning to create a Knowledge Base for the HSGBU Department. I haven't foudn any other application Oracle has for this porpuse, so we decided to go with Beehive Workspaces.
I would like to touch base with a Workspaces Subject Matter Expert/Engineer on some possibilites we might have to modify an existing workspaces site.
Please let me know the contact details of such person, or provide him mine, so we can discuss if the proposed changes are possible.
These include, but are not limited to:
*Search in the body of a Wiki article,
*Exporting Wiki articles to Word files,
*Modified access to Wiki documents.
Many thanks,
Krisztian Csobalyka

Krisztian,
Hope the Inquira option works out.
Phil

Java Runtime version for Forms on Windows 7 64 bit

Does Application Server require version 6 of Java plugin? We have a user that recently upgraded to 64 bit Windows 7. They installed version 7 of the Java plugin. When they try to run forms from our application server they get a message indicating that they need to install Jinitiator 1.1.8.2 or higher. I installed version 6 on a 64 bit Windows 7 machine and it works fine with forms.

You can set (overriding) the java.vendor system property in java control panel:
- open java control panel
- go to on tab 'java', click 'view'
- add -Djava.vendor="Sun Microsystems Inc."
Now forms run in java 7.
This is a workarround on the client side (disadvantage),
by the way, I tried to push this variable from the server side through java_vendor or java_arguments into html code but unsuccessfully.
NB: You can set "Sun Microsystems Inc." or something else but not 'Oracle Corporation' or 'MICROSOFT' because these strings are tested in the HTTPConnection.class in frmall.jar
Regards
Didier Marcelis

Flex SDK and AIR runtime version in mobile

Hi, guys.
I'm trying to make my first Flex mobile app.
I'm a little confused about the relationship between Flex SDK and AIR runtime versions for mobile development.
In the "Developing Mobile Applications with ADOBE FLEX 4.6 and ADOBE FLASH BUILDER 4.6" pdf document, it says:
"AIR requirements
Flex mobile projects and ActionScript mobile projects require AIR 2.6 or a higher version. You can run mobile projects on physical devices that support AIR 2.6 or a higher version of AIR.
You can install AIR 2.6 or a higher version only on supported Android devices that run Android 2.2 or a higher version. For the complete list of supported Android devices, see Certified Devices. Also, review the minimum system requirements to run Adobe AIR on Android devices at Mobile System Requirements.
Note: If you do not have a device that supports AIR 2.6 or a higher version of AIR, you can use Flash Builder to launch and debug mobile applications on the desktop."
So, I go and check the Certified devices in http://www.adobe.com/devnet-apps/flashruntimes/certified-devices.html and find that the minimun FLASH PLAYER version accepted by ALL devices is FP 10.1
1. Does this mean that if I want to release an app to target ALL mobile devices, then I can only use Flex 4.5?
2. Do support for Flash Player mean the same than support for Adobe AIR? Or the application will prompt the user to install whatever version of the AIR runtime and all of them would be supported by the device, even in the FLASH PLAYER support is for a lesser version?
Thanks!

Thanks for your help, Flex harUI,
The first impression that comes to mind is that FP version is indeed only for the web browser plugin. Then, why does the official Flex 4.6 mobile development documentation have a link to that page that only speaks about the supported FP version in mobiles under the title "AIR requirements"??
This makes it way too confusing.
Do you know whether there is something like an equivalent matrix/list of mobile devices with their supported AIR runtime versions? I went a great deal in trying to keep my original app under 400kb... I didn't know that in the end it would end up weighing 9.5Mb... :S
Thanks again,

Difference between Runtime version and Developer version of LabVIEW.

What is Version of LabVIEW called Runtime engine?
Is it only for viewing VIs built in LabVIEW developer version?
Can't we develope or edit VIs in RTE version of LabVIEW?

vaibhavinegi wrote:
What is Version of LabVIEW called Runtime engine?
There is a seperate Runtime version for every release of LabVIEW. You can open up NI MAX and expand software to see what is installed in your computer.
Is it only for viewing VIs built in LabVIEW developer version?
Without the development environment, you cannot edit LabVIEW VIs. The Runtime Engine is responsible for actually running the code so you can build LabVIEW programs into executables and run them on other machines without the development environment.
Can't we develope or edit VIs in RTE version of LabVIEW?
No

Three days ago I replaced an earlier Adobe Flash with version 10.1.85.3. This has not appeared in the list in Tools/Addons/Plugins to permit me to enable it in Firefox, and I can't find the answer in the knowledge base.

Re. installing/enabling a Flash plugin
1 I'm running Firefox version 3.6.10 on Windows XP SP3.
2 Three days ago Secunia PSI informed me the installed version of Flash was a security threat so I uninstalled it then installed the latest version 10.1.85.3 . It appears in the Control Panel add and remove programs listings.
3 As of 2 days ago BBC iplayer keeps telling me I need to install (latest version of?) Flash.
4 I don't have this problem using my fallback Internet Explorer.
5 Assuming I needed to enable Flash in Firefox I went to Tools/Addons/Plugins but Flash is not listed there.
6 Firefox Support/Knowledge base/Installing the Flash plugin doesn't help - in step 2 I don't see the yellow 'Additional plugins are required...' bar when I go to the Adobe test page, but then why should I, it's already installed.
6 What's going on - please help!

I have the same problem as luiszamarreno. I tried using the following to update:
sudo apt-get --purge remove adobe-flashplugin flashplugin-nonfree; sudo apt-get --purge autoremove; sudo apt-get clean; sudo apt-get upgrade; sudo apt-get --purge autoremove; sudo apt-get install flashplugin-nonfree
Now I have the "flashplugin-nonfree" v. 10.01.218+really9.0.283.0ubuntu1 and it still doesn't work for the Facebook plugin. I get the notice it has crashed and needs to be updated. I also get a notice to update on the plugins page under tools --> addons. When I try that, it goes to the Adobe Web site, which I have seen on Ubuntu support sites that I do not want to upgrade from there.
Does anybody have an answer to this?

Knowledge Base Version Determination in Sales order in SAP CRM

Hello everyone
I am facing a problem where recently a Configurable Item's Variant Class was modified.
After this we created a Knowledge Base Object & Run Time Version in ECC.
This has correctly replicated to CRM & can be correctly simulated in the Product Workbench.
However when I place a Sales Order, the IPC is still picking up the older Knowledge Base Object.
So my question is how is the Sales Order Product configurator in CRM determines which Knowledge based object version to be used ?
Note: The latest KBO which the Order should ideally use was created on the same day after abt an hour of the older one.
Just in case the issue has anything to do with the dates.
Please help.
Vinit

Nilesh,
E-Commerce B2B design hinges on an assumption that the Contact Person (alias for the Logged in User) has multiple Sold-Tos and one should pick the Sold-To for creating the order. That is, the application knows the Contact Person already and forces you to pick a Sold-To first. There is no partner determination per-se. It is hard-wired logic. The following Business partners are set instead of being determined.
<li>Contact Person - SU01 user alias etc.
<li>Sold-To - Through Contact person to Sold-To relationship
Remember, in CRM for the E-Commerce B2B to work, the logging in user (SU01 user) must be Internet enabled - aka - must have a Contact Person alias and the Contact person must have at least one Sold-To. And that is what is used in the above logic.
The SAPGUI version gives ways to select and set the partners the way we want by way of the Partner determination procedure . However, these config changes are not automatically reflected in the Web world. You have to make a similar change in the sequence of determining the partner. Like, selecting the Ship-To first and then the Sold-To. That will be custom modification. :..-(
A solution from10,000 foot level:
Maintain a similar relationship for Contact Person to Ship-To in Business partner. Or more sleek way will be to develop a custom function module to get all the Ship-Tos of the Sold-Tos the Contact Person (SU01 user alias) is related to. - Custom ABAP + configuration work
Change the standard E-Commerce flow to show a list of Ship-Tos as determined in the previous step. - Custom Java + application configuration work
Determine the Sold-To automatically from Ship-To by whatever logic you use now. - ABAP + Java
Set these new partners in the E-Commerce application.- Java
Create orders and be happy
(Usually there are several ways to skin a cat and this is just one of them)
Easwar Ram
http://www.parxlns.com

Hi, I have a MAC (version 10.10.2) and installed Creative Suite one year ago. Now I want to open the Illustrator, but it does not work. It says I should install old Java SE 6-Runtime-Version to open „Adobe Illustrator CS6". Where can I find it? Thanks for

Hi, I have a MAC (version 10.10.2) and installed Creative Suite one year ago. Now I want to open the Illustrator, but it does not work. It says I should install old Java SE 6-Runtime-Version to open „Adobe Illustrator CS6“. Where can I find it? Thanks for your answer! Jana

Prompted to install Java SE 6 Runtime | Mac OS 10.9
Mylenium

Million+ views - SAP Crystal Reports, developer version for MS VS: Updates & Runtime Downloads

1,000,000! One million views in just over three years;
SAP Crystal Reports, developer version for Microsoft Visual Studio Updates & Runtime Downloads;

Re. runtime distribution limits; WIN apps, free. Web apps used internal to your organization, free. Web apps deployed external to your organization, extra licensing applies. Check with sales: 866-681-3435
Worldwide Office Locations | SAP
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

How to install knowledge base file for oracle text

how to install knowledge base file for oracle text?
there are couple of files droldUS.dat,.. which are required to generate gists and themes, where can i find them or install them.
please help!

I checked the download page and it says:
"All Release 2 download pages contain Oracle Companion, Client, Clusterware, Gateways, and Application Express standalone downloads"
so you should already have it. Try searching for the filename that was in your error message.

What is the Java runtime version required for SAP GUI 6.20 for Windows?

Hi All,
I need the following information:
1. What is the Java Runtime version required for SAP GUI version 6.2 for Windows (Platform Windows XP)?
2. And is there any problem if we use Java runtime version 1.6 on PC?
It would be great if anybody can provide the information on the above.

To run SAP GUI for WIndows -- Java isnt a pre-requisite nor is there any dependency for the same.
Thanks,
GLM

Evaluation version for "Base Deployment Engine " available?

Hello,
we have one "Development-version" to develop testplans.
Now we are creating a cutom OPUI that calls the teststand-API. It works fine with the "Development-version".
Normally it should be enough to just install the "Base Deployment" to compile and use our custom OPUI.
The price is ~500EUR for the "Base Deployment"
Question is now:
Is there an evalution-download available to check if i can use our custom OPUI with the "Base deployment"?
I only find an evaluation-download for the full "Development-version"
Thanks

Deleting the license files will have the same effect as having an evaluation license, that's correct. Edited: Actually, deleting the license file will only trigger evaluation mode if the original evaluation license files are on the machine. This would be the case for a clean install, but may not be the case for OnlyOne's install. In that case, deleting the license files would just cause TestStand to not open.
However, my interpretation of the question (please correct me if I'm wrong, OnlyOne), is that he was wanting an eval version of base deployment so that he could confirm that his OI would work with a base deployment license. If that's the case, I think it's an equally accurate test to use an activated Base Deployment license.
Daniel E.
TestStand Product Support Engineer
National Instruments

New Knowledge base docs for LP X

For everyone here seeking help and/or offering it, there is a whole new set of at least a hundred (100) Apple Knowledge Base docs about LP X. I stumbled upon it, searching for something else. My first impression is that they're very useful and deceptively simply and well written, and a very good source to refer to for specific subjects.
http://support.apple.com/kb/index?page=search&product=&q=Logic%20Pro%20X&src=sup port_site.kbase.search.searchresults

AOS, must be that cheap Safari browser... <g>
I get a full page of help articles.
http://support.apple.com/kb/index?page=search&product=&q=Logic%20Pro%20X&src=sup port_site.kbase.search.searchresults
This is part of the page.

Creation of Runtime version for Knowledge base

Similar Messages

Maybe you are looking for