Creation of similar fixed assets

Hello
I am using a bapi bapi_fixedasset_create1to create similar assets, but its only creating a similar asset even though i am passing '8', it should create 8 assets.
Please suggest if i need to use some different BAPI or the importing parameter of BAPI in which i can pass '8' so that it creates 8 assets. Thanks.
Regards

hi deepak
thanks for the reply
but we need to use BAPI only..

Similar Messages

New user to Oracle 11i who needs help on creation of new fixed asset class

Hi all,
I am new to my Company who is using Oracle 11i. And the Company has a new class of fixed asset and a GL code has been created. But there is no link between the Fixed Asset Manager and the GL code, i.e. depreciation is not linked, additions are not captured into "Cost register", no asset number was assigned in Oracle. Please help.
Thanks,
Simon

Hi.
No, Simon, it does not work that way.
First, be sure that the distribution line has the flag "Track as Asset" checked.
Second, the GL Account to be used on the distribution line must be the one defined, in the FA Asset Category, as the Asset Clearing Account.
In FA, navigate to /Setup/Asset System/Asset Categories. Following, query a Category. There you can see which account has been used as the Asset Clearing Account.
You can use as many Asset Clearing accounts as you which, but normally, all Categories share the same account.
Now reverse the distribution line and cretae a new one with the correct account. Post it, run the Mass Additions Process and you will see the that the addition was created.
Hope this helps.
Octavio

Automatic VAT code during fixed asset PO creation

Hi all,
We have a classic AUC acquisition process : through MM with IO allocation.
My question is = is it possible to automatically affect one VAT code relating to fixed asset acquisition during purchase order creation? (and not VAT relating to goods and services acquisition, we have to distinguish both with french rules).
The person in charge of PO creation don't have to choice between VAT codes, this is the reason why VAT code has to be affected automatically.
Thanks in advance for your answer.
Best Regards

Hi Ocean,
if you use as91 you have to enter as followed:
***.acquis.val.     120.242,00 <- enter
***.down paymts
***.reval.of RV
***.invst.grant
Accm.ord.deprec     70.809,18 <- enter
***.Spec.dep.
***.unplnd.dep.
***.reserves
***.reval.O.dep
Net book value     49.432,82 <- calculated automatically
***. interest
Reval. posted
Ord.dep.posted     3.340,06 <- enter
Pstd.spec.dep.
Pstd.unpl.dep.     0,00
Res.posted
Of course SAP reverses the amount because it is entered as ord dep. posted (this means current fiscal year!!!) insted of accm. ord. depr. (depr. up to 31.12.2007)
The ***. depreciation up to 31.12.2007 has to be enterend in ACCM. ord. deprec.
The *** and posted depreciation from the current year has to entered in ORD.DEP.Posted, pls. have a look at my calculation.
How to correct the fields Ord.-dep. posted and Accm ord. dep? This depends on many parameters:
Have you carried out the datantransfer already in the P-System????
Any other postings for SAP AM already carried out
How many assets have to be changed.
You can reset the Companycode in AM (only recommendable if deprun is not posted and no other postings - retirements, aquisitions transfers have been entered). Then start a new upload
Even lsmw and a BI-recording as92 with the last screen could be a solution.
At least if you have only a few assets - correct them manually - it's not worth the effort to create a BIR and a LSMW - the user is faster.
Best regards
   Horst

Modify fixed asset master data thru migo

Hi experts,
I make PO with account assigment 'fixed asset'. This asset is created during the PO creation. When materials arrive more fields of that fixed asset master data are known (ie serial number). I'd like to have a way to save those data in asset during the GR without using 2 different transactions.
In MIGO t/c i see the fixed asset number and double clicking on it i access to display asset: master data (as i was on AS03 tc).
Do you think a way to call AS02 (change asset master data) thru MIGO exists?
Best regards,
Ruben

Hi Ruben,
Did you find a solution to your problem? I have a similar requirement.
I was planning on using the user-exit MBCF0005 to call a pop-up screen where the user can input the serial number and from there calling the BAPI to update the asset.
Cheers
Wayne

Fixed Asset Error: 'Invalid evaluation parameters, specify depn area

Hi Experts,
During creation of Fixed Asset Master Data, I encountered an error message 'Invalid evaluation parameters, specify depreciation area'. I reviewed all my definitions and I don't seem to see any missing definition.
I am using SAP 8.8 patch level 12.
Hope to hear from you.
Thanks,
Don

Hi,
check your depreciation area are proprely maintain and config. and check setting ,
and also check your assets master data are maintain properly with reference depreciation area

Steps in after migration of fixed assets in SAP R/3 System

Hi Guru's,
I migrated all fixed assets from legacy system to SAP R/3 system. Dev,Quality and Mock Production Server.
Could anybody guide me what is the next process in Fixed Assets?
That would be greate help from our Guru's
Regards
Odaiah Pelley

Report S_ALR_87011964 will be able to give you a report by Asset Class.
In terms of the data you have migrated, I am guessing in your current system there is a way to get the same data and therefore you should compare.
Another check is the total posting you have made to the GL Data Migration account is the same as the total balance in your current system.
FS10 will give you this.
Lastly you can also use FS10 for the asset recon accounts if they are grouped in a similar way in your current system.
The business lead should be able to help you with the data they have and how they could reconcile their data.

How to take Profit Center Wise (Customer Line item & fixed assets)?

Profit Center Wise (Customer Line item & fixed assets)
GL Report: S_ALR_87012282 (Profit Center wise GL A/C Line item)
AP Report: S_ALR_87012103 (Profit Center wise Vendor A/C Line item)
Similar for I want customer line item wise and fixed asset line item (profit center wise) report, S_ALR_87012197* this for customer line item wise report but,Here in the dynamic function there but not available in profit center, I need report what t.code available in profit center wise customer line item and fixed asset line item.
Thanks in advance
Selva

Hi Sweta
For obtaining profit center wise receivables/payablees and stock reports, you may need to follow these steps at every period end.
1. Execute F.5D - Calculate Balance sheet adjustment
2. Execute 1KEK - Transfer Payables/Receivables
3. Execute 1KEI - Transfer Assets
4. Execute 1KEH - Transfer material stocks
5. Execute 1KEJ - Transfer Work in progress
For more information, you can read the heading "Balance Sheet Items in Profit Center Accounting" in the below URL.
http://help.sap.com/saphelp_erp60/helpdata/en/eb/13811243c411d1896f0000e8322d00/frameset.htm
Regards

Capture Delta records in Fixed Assets Subledger

Hi,
I am creating an extract from ECC 6.0(flat file). After the initial load I will have to capture the delta records, how can I do that?
My file will bring the Fixed asset Balance Sheet accounts at WBS level.(the asset number do not appear in the file).

ADI provides support for the Creation of Assets and performing a Physical Inventory of your assets. This functionality is also provided by the Fixed Assets team using the Web ADI framework in 11.5.10. I'm not aware of the Fixed Assets team providing any other Integration support with Excel.

Standard reports in Fixed Assets

Hi all,
Is there any standard report in SAP that gives the information on additions made to the asset. I looked into the report S_ALR_87011990(asset history report), it has all the information I need except for additions made and corresponding depreciation for that addition. Could anyone tell me if there is any or how do I go about this problem. Please tell me if custom report is a must in this case, also the tables where I can find this information.
Thanks in advance
Kumar

These are report avaiable in SAP
| |-- Fixed Assets
| | |-- Asset Accounting Information System
| | | |-- Individual Asset
| | | | -
AW01N Asset Explorer
| | | |-- Asset Balances
| | | | |-- Balance Lists
| | | | | |-- Asset Balances
| | | | | | |-----S_ALR_87011963 ... by Asset Number
| | | | | | |-----S_ALR_87011964 ... by Asset Class
| | | | | | |-----S_ALR_87011965 ... by Business Area
| | | | | | |-----S_ALR_87011966 ... by Cost Center
| | | | | | |-----S_ALR_87011967 ... by Plant
| | | | | | |-----S_ALR_87011968 ... by Location
| | | | | | |-----S_ALR_87011969 ... by Asset Super Number
| | | | | | -
S_ALR_87011970 ... by Worklist
| | | | | |-----S_ALR_87010125 Sample for Address Data for Asset
| | | | | |-----S_ALR_87010127 Real Estate and Similar Rights
| | | | | |-----S_ALR_87010129 Vehicles
| | | | | -
S_ALR_87011978 Asset Balances for Group Assets
| | | --- Depreciation Posted
| | | | |-----S_P99_41000192 Posted depreciation by asset and posting period
| | | | -
S_ALR_87010175 Posted depreciation, related to cost centers
| | | |-- Depreciation forecast
| | | | |-----S_ALR_87012936 Depreciation on Capitalized Assets (Depreciation Simulation)
| | | | -
S_ALR_87012026 Depreciation Current Year
| | | |-- Day-to-Day Activities
| | | | |-- International
| | | | | |-----S_ALR_87012048 Asset transactions
| | | | | |-----S_ALR_87012050 Asset Acquisitions
| | | | | |-----S_ALR_87012052 Asset Retirements
| | | | | |-----S_ALR_87012054 Intracompany Asset Transfers
| | | | | |-----S_ALR_87012056 Directory of Unposted Assets
| | | | | |-----S_ALR_87012058 List of Origins of Asset Debits
| | | | | -
S_ALR_87012060 List of Origins by Cost Elements
hope this is helpful...
Please asign points as a way to say thanks.

Data source for fixed assets

Hello All,
I would like to know what is the new version of data source for fixed assets. I believe it is 0FI_AA_20. But, this data sources has less number of fields compared to the old version data sources viz. 0FI_AA_11.
Which data source is presently being used widely. Is IT 0FI_AA_20 or is it 0FI_AA_11. If so, for what reason?
In case you are using old version data source viz. 0FI_AA_11, how did you justify to the client that 0FI_AA_11 is the appropriate data source.
Regards.
Shanker Ramabhotla

Hi Lokesh,
Thanks for your reply.
We have already implemented the notes in our development vut it did not help. It looks like we have a problem with the extractor checker too. I ran the extractor checker today but the total record count is exceeding the records in there.
If anyone has faced a similar situation with this particular data source, then please provide me valuable inputs.
Any help would be greatly appreciated.
Thanks,
Vinay

Problems installing add-on Fixed Assets

Hello All
The process of creation of tables of the add-on " Fixed Assets " was interrupted and now it fails providing that it tries to resume.
Since I can do that install again the process?

Hi,
Yes, I have always had issues initialising the Fixed Assets module. Typically, it will fail 2 or 3 times when creating the tables. Each time you can stop the add-on, restart it and say Yes to continue. Eventually it will create all the necessary tables and you can use the add-on. We've found this to take anything from 1 to 2 hours to complete per company.
Kind Regards,
Owen

Tracking Fixed Assets between receipt and invoice processing

We have encountered an issue while using Oracle Fixed Assets that we are trying to solve. The issue involves asset tracking from the time of receipt until the invoice is processed and the asset record created and posted.
As you're probably aware, assets don't appear in FA until the invoice has been accounted and transferred to GL. We can have assets that are received and deployed before we even get the invoice for processing.
We need the ability to record and track where the asset has been deployed(Employee Name and asset Location) and to later update the appropriate asset records after they are created and posted in Oracle.
Right now we are doing this manually which means someone is entering data twice for the same thing. Has anyone come up with a workaround to cover this gap between asset receipt and asset creation?
TIA
Ken

Hi,
I see this is a very old post but did you find a solution? I am keen to learn more about this.
Mike

UDF For Fixed Asset Addon

Hi,
I am tried to add an UDF to Fixed Asset Master data and the UDF has been added successfully. However the UDF doesn't appear in the FA master data screen. I tried to enable User-defined-field from menu item however nothing happen!!
Please help
System detail: SBO 8.81 PL08
Regards,
Jack
Edited by: Jack Tan on Sep 14, 2011 11:44 AM

Hi,
I checked for Notes regarding your issue and found this Note which is for version 2005.
[1087337|https://b1-support.wdf.sap.corp/sap/support/notes/1087337]
I know that you are working with 8.81 PL08 but unsure whether the working in Note is similar to current version as well.
Kind Regards,
Jitin
SAP Business One Forum Team

Fixed Assets Add-on

Dear All
Our fixed assets add-on seems to be having a problem, according to the fixed assets accountant , the July depreciation run only generated a journal to the general ledger but did not update the fixed assets registrar. What could cause and how can we prevent it from happening in the future.
Thank you.

Hi Gordon,
I have a similar issue, I use B1 2007 A PL 42 Australia and FA addon patch 8.00.00.42 in package
Remaining life does not updated after depreciation run.
How to solve it
Thanks in advance,
Son.

Import Fixed Asset by excel

Hi Every one,
     I am importing FA in SAP B1 PL 09 but failed, with system message log " Its active depreciation areas must be the same as those defined in the corresponding asset class. I checked depreciation areas and asset class, They corresponded to each other.
     Please help me to find way to solve this error.
Thanks & Best Regards
     Loan Tran

check below..
Fixed Asset SAP Business One 9.0 Configuration

Creation of similar fixed assets

Similar Messages

Maybe you are looking for