Creation of Vendor thru tcode PRAA.

Dear All Gurus,
I want to create a vendor for the Integration of FI - TRM. and i know the tcode for creating a Vendor as well Tcode PRAA.
I want to know what are the inputs to be given for creation of Vendor.
I also want to know that how assignment to done by it.
Waiting for reply.
Thanks and Regards,
Prashant.

If in Travel Expenses you need to reimburse employees through FI-AP, they should be also created as vendors.
For that employees should have data in info type 6 (Address), 0009 (Bank details), 0001 & 0002, the data should be mandatory for these infotypes.
When running the T code PRAA, mention the reference vendor and this reference vendor shoulld have all details. And check whether you created the number ranges for the vendor. After converting the employee as vendor, check in the table LFB1. If data exists in that table your employee is converted as a vendor.
Also make sure that for this vendor category (usually employees are special account group) you have the LFB1-PERNR field as a mandatry input.
Also check these links:
http://help.sap.com/saphelp_45b/helpdata/en/b6/cd981949e911d189060000e8322f96/content.htm
http://help.sap.com/saphelp_45b/helpdata/en/b6/cd982649e911d189060000e8322f96/content.htm

Similar Messages

Automatic creation of Vendor in FI from Business Partner

Hi, experts!
We are looking into a process to automate the creation of vendor master data in FI Accounts Payable for our employees and to keep them in sync as employees' names, banking and address info change over time. We use concurrent employment, and we noticed that running PRAA as a mass-update job to create vendor records for all employees will create duplicate Vendors for employees who have more than one active Personnel Assignment.
We are now looking into the possibility of using the Business Partner as a means of pushing HR data into FI within the same ECC6 system. So far, we have been able to turn on the automatic creation of BPs when new employees are 'hired' into our test system via transaction PA40. We can also use the program HRALXSYNC to create the BP for existing employees. Once these BPs are created, master data updates flow from the employee master data in HR to the BP. However, we can't seem to get the system to automatically create a Vendor record for this BP and have that linked together at the same time.
Is this possible? If not, is there a transaction that can be run to do a mass creation of Vendor records for Business Partners that don't already have one?
I can see that our BPs have been assigned to the proper Role in table BUT100, and we have "define(d) vendor link for business partner roles" in V_TBC002 to be "vendor-based". What configuration step might we be missing?

Hi, Mahesh
Thanks for the response!! We have already created an entry in this table for Role Category = BUP003 (the SAP-delivered role category "Employee"). In this table, we have chosen the "Vendor Based" radio button, since we want Vendor master data to be created for all BUP003 business partners that are created.
Which function modules need to be activated via the SPRO path Cross-Application Components -> SAP Business Partner -> Data Distribution -> Activate Function Modules in order to have Vendors automatically created whenever a specific role of BP is created?
Thanks again for all your help!
- Steve Miller

Creation of Vendor master

Dear All,
I am trying to create Vendor Master by using Tcode: PRAA, here I maintained all infotypes necessary for the employee and I assigned the reference Vendor also but when I executing it it is showing that the employee record is included in file but not created vendor record for that.
so pl. suggest me the way how can I create Vendor master Iam working in SAP HR. and I am new to this pl help me.
Regards,
Sushma.

Hello
Check this
Creating Vendor Accounts from HR Master Record
Use
In the Travel Management application component, which is assigned to Financial Accounting (FI), personnel numbers are used to pay business trip costs into vendor accounts. To pay business trip costs, you require an appropriate vendor account in FI.
HR master data must be replicated in the FI system using ALE. The Create Vendor Accounts from HR Master Record interface enables you to transfer HR master data to the FI system. After the data has been transferred, a program runs in the FI system that uses the HR data to create the appropriate vendor accounts. Once these vendor accounts have been created, the FI system can pay the trip costs.
Integration
The Create Vendor Accounts from HR Master Record interface is supported by ALE. You must replicate the following infotypes:
●     0000 Actions
●     0001 Organizational Assignment
●     0002 Personal Data
●     0003 Payroll Status
●     0006 Addresses
●     0009 Bank Details
●     0017 Travel Privileges
Activities
Go to the SAP Library and choose CA - Cross-Application Components ® ALE Business Process Library.
Also check this
Human Resources Master Data
A record containing various information about an employee. For more information, see Processing Human Resource Data.
If you use the Personnel Administration (PA-PA), you can store employees names and passport data in their human resources (HR) master data as follows:
Enter the first name, middle name, and last name in the personal data (infotype 0002).
Enter the passport number in the infotype 0290.
To be able to post to these employees from Financial Accounting(FI) transactions, you must use vendor master records. You can use either of the following two options:
You can create one vendor master record for each employee, and enter each employees personnel number in its vendor master record.
Then, when you make a cash disbursement to an employee, you can enter the employees vendor account number.
You can create a single vendor master record for all employees, and leave the personnel number field in the master record blank.
Then, when you make a cash disbursement to an employee, you can enter the vendor account number and the employees personnel number.
In both cases, the system automatically prints the employees name and passport number on the cash voucher.
Reg
*Assign points if useful

TCODE PRAA and inactive employees

Hi all!
I'm new to tcode PRAA and I'd like to know if it's possible to create vendors from inactive employees.
For example: I have an expatriate. His original file is inactive - expatriate file active in HR - and I want to create the vendor using his original file.
Is it possible?
Thanks for your help!

Hello Matthieu
I wonder if this relates to how you have configured your leaving action for inactive employees? Please check if the flag 'Maintenance permitted after leaving' is maintain in table V_T582A, for the relevant HR infotypes 0000, 0001 and
0017.
Then check if you configured a leaving action for Travel relevant employees?
You can find these under the tree menu for Person Related master data.
When an employee leaves the company, the general process is to create an action for the master data. You can either use the standard delivered action 'Org reassignment' or create/copy your own based on the standard.
You can do this in transaction PR05, menu point environment > personnel actions. Here you activate the radiobutton "Organizational reassignment"and press enter. Then you can create an action. You should use the action type 'leaving' (10).
That said, I am not sure if this will extend to PRAA as I could find no specific support issues from FI-TV side whereby the same checks will then allow vendor to be created - it seems to only be the case that bank update can occur for already created and previously active employess in which case would leave me to believe you would have to run PRAA in update mode to update having manually created the vendor in FI.
Sally

Error in creation of stock thro Tcode MB1C

Hi,
while creation of stock thro Tcode MB1C i got the error posting period mentioned as 12/2002 to 11/2002.
I tried using Tcode OMSY to update my company's period and year as current year but it is grayad out.
Please advise
Regards
Ramya

Hi,
OMSY setting is used only for once & for all to fix up the Initial Period and Year for a company code for material management. After setting in OMSY, nobody should touch this setting.
Now 1st check in MM side in MMRV t.code which period open for your company code & back posting allowed or not. If period 11 & 12 not open, you can open in t.code MMPV
And also check in FI Side in t.code OB52 which period is open for in all Account Types A, K, D,M, S and specially Account Type u201C+u201D which stands for valid for all accounts types . If periods 11 & 12 not open, you can open for all account types.
Note:
Check your fiscal year variant for your company code in OBY6 t.code. If it is K4 , then open periods {Period start from January(01) & end in December(12)}. If it is V3 , then your periods {Period start from April(01) & end in March (12)}
Regards,
Biju K

Error in ALE Service While Creation of Vendor Master

hi,
I am using a scenario where a third party system is sending vendor master data to a R/3 system The file is picked up by the file adapter(sender) and mapped to IDOC format, using Idoc adapter (receiver). A Vendor is then created by posting the CREMAS03 IDOC into the R/3 system.
Everything goes fine till the Idoc comes into the R/3 system. There in BD87(Idoc Status Monitor), getting the "Error in ALE Service" error. When expanded further the specific error is that of "Cross-system company code xxxx does not exist". What is generally the cause of this error and how would I resolve it?
For those of you who have attended TBIT 40, this scenario is Example 1 - Creation of Vendor Master Data.
Any help would be appreciated?
regards,
SK

one more thing
if you want to be sure that you're using the right data
try to set your system to send the vendor data out
first - send it from BD14
and then you'll know which fields do you need
if you do that take a look at segment E1LFB1M
and check for BURKS
Regards,
michal

Creation of Vendor Aging Report in SAP BI.

Hello,
There is requirement to create the Vendor Aging report in SAP BI Cube.
In order to show the Aging of the Vendor in different buckets.
Can anyone help me out with the Links/Blogs/Wiki ... URL's .
I tried finding in net couldnt get anything related to this.
Thank you for the help in advance.
Regards,
Adhvi

Hello Obaid,
Thanks for the reply.
got the URL for Vendor Aging Report ..which has better detailed information.
http://help.sap.com/saphelp_nw70/helpdata/EN/69/b4e9503d6a4f39b66e67b1cedf41af/frameset.htm
0FIAP_M30_Q0003 not found in the BI Content
Creation of Vendor Aging Report in SAP BI.
Vendor Ageing formula
If you come across any further Customization of the Reports related to the Vendor ageing reports based on the URL mentioned below...let me know.
Thanks & Regards,
Adhvi

Check on PO Creation for vendor Open Advances

Hi :
There is a requirement from the client . They want to put a check on PO creation against vendor . It is if for example vendor has open advances exceeding 5 million then system should check it at the time of PO creation and should stop or warn the user from creating PO indicating the amount of advances standing open for the vendor in PO. Is there any way to handle this in SAP MM. ?
Thanks

Hi Mallinath:
Thank you for your reply. Yes i mean to say the same. We need a feature in SAP MM wherein we can set a limit on PO creation if vendor advances exceeds beyond a specified limit . Is it not achievable through standard customizing just like we have credit management in SAP SD..

Creation of Vendor Invoice - BADI to control "Payment Baseline Date field"

Hi ,
In SRM - Creation of Vendor Invoice or Credit memo -
In the process of creation of vendor invoice in Header Data - Payment Data tab there is a field "Payment Baseline Date" and I want to populate custom value to this field using BADI. But I could not find any BADI to do this.
Can any one please let me know if any idea what BADI I can use.
I tried DOC_CHANGE_BADI and this one does not have this field in the ET_HEADER.
Thanks in advance.
Venkat

Hi,
Any ideas please?
Thanks for ur time.

Payment advice for multiple vendor using tcode F110

Hi all
I am facing problem while printing payment advice program for Multiple vendors using transaction F110. If I passed single or multiple vendor , I am getting only single vendor payment advice details ( if I passed more than one vendor also) .I need solution for multiple vendors .
Tcode : F110
Program : RFFOD__U .
How to print multiple vendor for payment advice details.
pls provide the solution for this..
waiting for Reply.

I have used different program RFFOD__S. It was working fine.

Payment to vendor thru Petty cash

Dear all
While making a payment to vendor thru petty cash by deducting TDS amount total payment amount should not
add that TDS amount but in our case total payment is considering that TDS amount also.
Earliest help is needed.
Viral.

Think that you have raised 1000 Rs Invoice on which TDS is 100 Rs, so the amount payable is 900 Rs. You have to pay 900 for the vendor through cash journal and go to F-44 and knock off the invoice and cash payment.

Invoice creation by vendor and Brazil Localization

Hi gurues,
We are starting a SUS implementation on SRM 7.0 for a brazilian company and we want to know if SRM 7.0 is localized for Brazil, in order to calculate brazilian taxes at invoice creation by vendor on SAP portal.
If yes, I would like to know if there is a guide or document to implement brazil localization on SRM 7.0. Thanks in advance.
Regards,
Horacio Miranda

Hi,
Please check help.sap.com. There is some info.
http://help.sap.com/saphelp_srm70/helpdata/en/46/316c6190fd14dde10000000a155369/frameset.htm
Regards,
Masa

Populating the email address (SMTP_ADDR) in Vendor Master using PRAA

Hi, experts!
We would like to start using transaction PRAA (program RPRAPA00) to create and update Vendor Master Data based on HR employee data. As part of this process, we would like to populate the "E-Mail" field with data from infotype 105. (We have a separate infotype 105 subtype that stores the email address in the USRID_LONG field.) I added the INFOTYPES: 0105 data declaration via an enhancement spot in RPRAPADE_ALV, so the GET PERNR brings in the appropriate p0105 data.... I just don't know how to push that into the appropriate field in the vendor master.
I am trying to find the structure within the RPRAPA00 program that contains the email address field SMTP_ADDR, but can't seem to find it. When a Vendor is created, it looks like this field gets stored in the ADR6 table, but I don't really understand how the ADDRNUMBER field in the ADR6 table gets linked back to the vendor number (LIFNR).
I looked at the BADI BADI_EXITS_RPRAPA00, but none of the defined Methods have an email address field.
How do I update the email address field in the vendor master using PRAA?
Thanks in advance for any advice you can give!
- Steve

Did you figure this out? I'm trying to do the same thing.
see PRAA user exit to update vendor email address
A couple of things I found are:
- there are 2 email address on the vendor
- Comunication section - SZA1_D0100-SMTP_ADDR
- Correspondence section - BLFB1-INTAD
- apparently it is some kind of standard to use the correspondence section email address to send emails via F110
- you have access to BLFB1 in RPRAPAFO_ALV
- using the modification assistant I was able to populate BLFB1-INTAD
- like you I thought the vendor email address's were stored in ADR6 but I tried going in to XK02 and added a couple of bogus email address's to a vendor and then went into ADR6 looking for them. I could not find them. Correction - I took another look in ADR6 and I did see the test email address.
Buy reading some other threads they imply that this can be done via a user exit but like you I can't seem to be able to see how.
Jerry
Edited by: Jerry on Mar 12, 2011 12:48 AM
Edited by: Jerry on Mar 14, 2011 5:12 PM

Update email in Vendor master through PRAA

Hi,
Is it possible to create email id in communication tab of Vendor master through PRAA.
I have read so many threads, but not got any solution.
I know it is not possible without do any development, could you please highlight some inputs to do this?
Regards
SM

Hello SM,
As per the documentation in SE38 on program RPRAPA00, the system creates
vendor records by reading the infotypes:
Actions (Infotype 0000)
Organizational Assignment (Infotype 0001)
Personal Data (Infotype 0002)
Permanent Residence (Infotype 0006 Subtype 1)
Bank Details (Infotype 0009 Subtype 0 or 2)
The Communication (Infotype 0105) where the email address is stored is
not read. Even if the 0105 was read and was able to populate field
SMTP_ADDR with an email address in the vendor master record it is
actually not possible to email remittance/payment advices to vendors
after running the payment run (F110) or creating the DME file. It is
only possible to fax or print payment advices. An Alternative suggestion
to other customer is to used the User Exit in note 570023 and 407827.
407827 - RFFO: mail payment advice notes
570023 - User exits for the generation of vendors with RPRAPA00
You can use the Interface SAMPLE_PROCESS_00002040 in note 407827.
Regards,
Raynard

Deletion of Purchase requisition thru tcode MEMASSRQ

Hi experts,
In table MASSFLDLST I have done the following modification thru tcode sm30
Create : -
object type = BUS2105
Table name = EBAN
field name = LOEKZ
The field LOEKZ is now appearing in the tcode MEMASSRQ. But when we execute it, the square box for selecting mass PRs is not appearing.
Please clarify.
Regards,
( Rajneesh Gulati )

Hello Pankaj,
In status tab deletion indicator is not shown. In fact it is not shown on the Line item as well.
For closing PRs as suggested by you, I have configured field EBAKZ in table MassfldLST. But still it is not showing in the tcode MEMASSRQ.
Please suggest.
Regards,
( Rajneesh Gulati )

Creation of Vendor thru tcode PRAA.

Similar Messages

Maybe you are looking for