Creative live wireless Version :2.0.2.83.1_090805

my firmware isVersion :2.0.2.83._090805 whats yours

Your Mac only has 24GB's of free storage space. That will definitely slow your Mac down.
Click your Apple menu  top left in your screen. From the drop down menu click About This Mac > More Info > Storage
Rule of thumb. Make sure there's at least 15% free disk space.
Freeing space on your Mac OS X startup disk
Also, open the Finder. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following:
/Library/StartupItems
Click Go the move the Sibelius7LicenceServer file the Trash.
Also, if you aren't syncing a Blackberry remove the USB rim driver. Visit the Blackberry website for uninstall instructions.

Similar Messages

  • Creative Live wireless webcam - DDNS or any other outside access doesn't work

    Bought the Creative Live Wireless webcam. Works inside my network, but DDNS server offered by Creative has been down for weeks now, so I can't use this service. The remote IP access also does not work, since the webcam doesn'y assign a remote IP (it states 0.0.0.0).
    No support infor on Creative web page at all, they don't even list the product. I feel like this is all a big scam....
    Can anyone provide insight in how to the this product to work?

    Did you get an auto response to your e-mail? Once a request arrives a response goes out automatically. If you didn't get that, check your spam filter first as the reply may be stuck there.
    If for some reason you did not receive any response at all, please send me a PM with your contact details. I will have someone look into your issue.
    Message Edited by KokChoy-CL on 06-12-2008 09:09 AM

  • I can not reactivate my DDNS service after having reinstalled my Creative Live Wireless Webcam

    Hi,
    After having changed my wireless router's network key, I had to change of course also the key
    stored in my Creative Live Wireless Internet Camera setup. To do
    this, I have deleted my cam definitions and did a scratch install after
    resetting. However now I can not register my URL name anymore and DDNS is
    disabled. The setup wizard says that it could not connect to the server to
    register my host name (in fact this name is already registered by me before) and that I should try again. I attempted numerous times, no help!
    The IP adress of my Creative Wireless Cam is 92.68..250, it is exactly the same as it
    was before. My registered URL was "goztepe.creativeddns.com" and remote monitoring?was working?
    with these parameters without any problem, which are still the same as before, I did not change them.
    How should I reactivate my DDNS service? Maybe a reset or something alike is needed on the Creative Server which is doing the URL registrations? I would appreciate any help because I
    am not able to access my cam from remote anymore!
    Thanks in advance. Ozgur Ozdemir

    Did you get an auto response to your e-mail? Once a request arrives a response goes out automatically. If you didn't get that, check your spam filter first as the reply may be stuck there.
    If for some reason you did not receive any response at all, please send me a PM with your contact details. I will have someone look into your issue.
    Message Edited by KokChoy-CL on 06-12-2008 09:09 AM

  • Live Wireless with other webcams?

    As those of that own the Creative Live! Wireless webcam know, the image quality is quite low. I love the portability of the embedded server, but does anyone know if this will work with other higher quality webcams? I tried my older (but higher quality) logitech webcam but the server did not recognize it. Has anyone tried other creative brand cameras? Any luck? It would be great if the server could support a wide variety of cameras, this would extend the life of the server, allowing you to upgrade the cameras as higher quality ones become available.
    As a side note, can this server stream two webcams at once? What about support for a USB hub and more then two webcams?
    Thanks for any replies.

    I haven't tried other cameras. I don't know if they would work. I suspect that the driver(s) in the server can only work with limited devices. Nonetheless the life of the server is tempered even more so by the CreativeDDNS issue. For a while now the DDNS registration used in the Creative Li've Wireless Server is not working correctly. There is another thread devoted to that topic "Is the creativeddns working"

  • [Solved]Webcam Creative Live not working

    Hi,
    I think there's a problem with one of the latest updates, my webcam was working fine since before
    myself@Desktop ~]$ dmesg |tail
    usb 2-2: USB disconnect, address 3
    gspca: disconnect complete
    usb 3-1: new full speed USB device using uhci_hcd and address 2
    usb 3-1: configuration #1 chosen from 1 choice
    gspca: probing 041e:4064
    ov519: I2C synced in 0 attempt(s)
    ov519: starting OV7xx0 configuration
    ov519: Sensor is an OV7670
    gspca: probe ok
    gspca: probing 041e:4064
    [myself@Desktop ~]$ spcaview
    Spcaview version: 1.1.8 date: 25:12:2007 (C) [email protected]
    Initializing SDL.
    SDL initialized.
    bpp 3 format 15
    Using video device /dev/video0.
    Initializing v4l.
    ERROR opening V4L interface
    : No such file or directory
    [myself@Desktop ~]$ xawtv
    This is xawtv-3.95, running on Linux/i686 (2.6.30-ARCH)
    xinerama 0: 1280x1024+0+0
    WARNING: No DGA direct video mode for this display.
    /dev/video0 [v4l2]: no overlay support
    v4l-conf had some trouble, trying to continue anyway
    v4l2: open /dev/video0: No such file or directory
    v4l2: open /dev/video0: No such file or directory
    v4l: open /dev/video0: No such file or directory
    no video grabber device available
    My webcam is a Creative Live IM Vista. Also the sound recorded plays back faster than I recorded.
    I've noticed that if I login as a root on KDE4 then xawtv will play fine,
    su -c Skype
    but skype will shows only green test's display and crash after a while.
    F
    Last edited by TheSaint (2009-10-05 17:07:55)

    groups
    disk lp wheel locate http games clamav dbus hal network video audio optical floppy storage scanner camera power users
    I made an Arch installation on USB which isn't affected by this sort of problem. Unfortunately I'm not able to find the differences to trace the flaw.
    EDIT
    Partially solved:
    Nvidia packages block the normal user access to /dev/video*
    LAST EDIT
    Found the issue, Must set a environ variable XLIB_SKIP_ARGB_VISUALS=1. Then I appended to /etc/profile.d/xorg.sh. Also mentioned in this thread
    F
    Last edited by TheSaint (2009-10-05 17:13:33)

  • Creative Live

    I have just bought the creative live 24 bit sound blaster usb thing, which comes with a remote control - the program that is on the cd is rubbish but i find the controller really useful - i was wandering if there was anyway of getting itunes to respond to the romote?

    Hi Grant,
    This page says it has a Note (1) on the USB Video Class info that it only applies to Windows XP Service Pack 2
    This Page at Ecamm for their camera guide does not even mention it. (it may be a new version and the list is not exhaustive).
    I can not see it comes with an On/Off Switch - although it can be twsited into a "Down" Position to be Off. It would be worth checking this.
    Does it show up in her System Profiler ?
    The Blue apple icon > About this Mac > More Info Button
    Click on the Hardware reveal triangle > USB
    If it is truly UVC compliant then it should work.
    1:53 PM Friday; September 7, 2007

  • After downloading & installing application of adobe creative suite cs2 version 6,  screen of adobe photoshop cs2 is not opened by clicking icon . message is giving " ausba4.dll " was not present. Please guide me.?

    I have downloaded & installed adobe creative suit cs2 version 6 but when I click the icon of adobe photoshop in desktop it is not opened & giving message " this application has failed to start because " ausba4.dll " was not found. reinstalling of the application may fix the problem " I have reinstall & opened many times but even then it is not opened. Please guide me accordingly.

    I'd try disabling the Twain_32.8BA plugin in
    C:\Program Files\Adobe\Adobe Photoshop CS2\Plug-Ins\Import-Export
    You can disable the plugin by putting an ~ (tilde) in front of the name or moving the plugin to your desktop.
    Then try photoshop cs2 and see if you still get the error message.
    I suspect the error has to do with your scanner driver, since photoshop cs2 does not have an ausba4.dll

  • Creative Live Vista IM (VF0420) Problem, PLEASE HELP!

    Hi
    I use Freetrack to play Airplane Combat Simulators, it's a program that uses the WebCam and a hat with 3 LED to simulate the head movement inside the cockpit.
    I'm using Creative Live Vista IM (VF0420) installed the CD drivers and it works perfectly with the Freetrack and all the other programs.
    Recently i've bought a Joystick (Saitek Aviator), so I installed the drivers on the CD plugged in the Joystick and it was also working perfectly.
    The problem is that now the camera it's not working and the only way to get the camera working is to unplug the Joystick and restart the computer.
    After the restart I tested the camera and it was working ok, but again, just after I plug in the Joystick the camera freezes the image and stops working until the next restart with the joystick disconnected.
    Resuming, this camera only works when the joystick is disconnected since the computer restart. LOL
    I'm using Windows XP 32 Bit + SP2
    I tested with other webcam (also Creative) and had no problems working with Freetrack and no conflicts with the Joystick.
    I see no conflicts on the Device Manager.
    Anyone with the same problem or with the solution please reply.
    Thank's in advance.

    buddhika wrote:
    Im using P4 2.4 ASUS MB (Via chipset VT8237)256MB 60GB HD52x Asus CDromSB Li've 24 bitHard disk is primary IDE, CD rom is secondary IDE masters
    I have used old creative and Ectiva sound cards very wel in last years. I gat a SB Li've 24bit new card.
    I have a dual boot sys, I installed SB drivers in win98se and it worked well. no problem (although sound card specs didnot said its compatible with win98)
    then I installed drivers to winXP sp2, it worked well untill i used cd rom.whenever cd rom is reading data sound gets very distorted (sound is from Hard disk files; mp3 wav, ..). I used different players problem remain,in games the sound distorts when cd runs.cant play a Audio CD, sound is too distorted.
    I have changed the Sb's PCI slot and booted first the problem was gone, then restarted and problem remained.
    I have questined creative support but no answer.
    Please help me !!
    If you use cable between CD-ROM dri've and sound card, disable the "Enable Digital Output ...." setting on Device Manager --> DVD/CD-ROM dri'ves --> your dri've name --> Properties --> Properties -tab. If not using cable, then try with cable instead (disable this setting then).
    Check if DMA transfer is activated for CD-ROM dri've(s) (try if enabling/disabling it makes any difference).
    Disable the Creative CD-ROM detector (service).
    jutapa

  • Creative ALchemy different version for different cards or one for a

    Hello,
    if there are different versions from Creative ALchemy
    In the forums i found somthing about
    - ALchemy for Audigy,
    - ALchemy X-FI Editon
    and on the Creative Download Page i found "Creative ALchemy .20.04". Also on my driver CD was an ALchemy X-FI Editon.
    Whats the different between this versions and what the different to "Creative ALchemy .20.04" (all in one)
    Maybee ALchemy for Audigy and ALchemy X-FI Editon are older version and now are only on version for all cards
    Regards, Henry

    Hi,
    Previously Creative maintained a version of ALchemy for the Audigy and X-Fi's as seperate applications.
    Acouple of weeks/months ago, Creative announced that as of .20.04, all Audigy and X-Fi's would be supported by the one application.
    Just download and install the version you have found on the Creative Download Page.
    Andrew.

  • Ordered a PS3 controller and got a wireless version when a wired version was advertised

    Hi, i ordered this http://www.bestbuy.com/site/pdp-rock-candy-controller-for-playstation-3/6608501.p?id=1218761709052&s... 2 nights ago and it just arrived. I opened it to find out it was actually a wireless controller(that also needs batteries which didn't even come included) even though the page i linked clearly has a picture of a wired controller(with different analog placements) and even states that it has a "8' cord". I didn't open it or anything yet, just in case i mess something up. Anything i can do about this or should i just deal?

    Hi LegendOfAB,
    I've got mixed feelings on wireless controllers that require disposable batteries myself, so I can imagine why you'd be concerned. There are two ways you can approach this though. First, if you'd prefer the wired version you originally ordered, we can arrange a return + exchange. Second, if you find yourself liking the wireless version, you can keep it with our compliments -- our mistake is your gain. Just keep in mind that you may encounter difficulties obtaining warranty support if you opt to go the second route! Most manufacturers require purchase details to process warranty claims, so you may be out of luck if your receipt/order info doesn't match the model you received.
    I'd like to gather some information, so please make sure to check your private messages. To check your PMs, simply sign into the forum and then click on the letter icon in the upper right-hand corner of the page.
    Aaron|Social Media Specialist | Best Buy® Corporate
     Private Message

  • I'm paying for my creative cloud (student version) and my after fx trial version is over but it keeps asking me for the serial number. What can i do?

    I'm paying for my creative cloud (student version) and my after fx trial version is over but it keeps asking me for the serial number. What can i do?

    Moving this discussion to the Creative Cloud Download & Install forum.
    Anebz I would recommend fixing the connection error preventing the applications from contacting our activation server.  You can find details on how to resolve the connection error at Sign in, activation, or connection errors | CC, CS6, CS5.5 - http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html.

  • I have a Creative D100 wireless speaker.  How do I get my bluetooth on my Mac to work with the speaker.  It doesn't appear to recognize the speaker.

    I have a Creative D100 wireless speaker.  How do I get my bluetooth on my Mac to work with the speaker.  It doesn't appear to recognize the speaker.

    Have you gotten in touch w/the speaker manufacturer?  Their response? 

  • Error while trying to install creative live central in Win 7

    I get the following error message when I try to install creative live central on Windows 7 Ultimate X64.
    Please insert disc 1 with file 102002536
    Path: C:\Windows\temp\CRF004\LCentral *browse button*
    Anyone know what this is about? It's very annoying.

    Oh really?

  • Microphone doesn't work for Creative Live! Cam Socialize HD AF HD Webcam

    Microphone doesn't work for Creative Live! Cam Socialize HD AF HD Webcam (for Windows 7).
    I have to use external microphone from Logitech now.
    I send few emails to Customer Service. They answered once to check my Device Manager and disappeared after that. I'm really disappointed.
    It looks like the drivers for Windows 7 are wrong.

    hey Killthebeeping,
    if you have the USB Mic connected kindly remove it first then uninstall the audio drivers for your B510.
    let windows install its generic driver.
    once done plugin your usb mic and test it again.
    WW Social Media
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    Have you checked out the Community Knowledgebase yet?!
    How to send a private message? --> Check out this article.

  • (Movie included) - Upgrade to Creative MediaSource5 to version 5.10.38 HANGS (freezes) all the t

    The file to upgrade Creative MediaSource5 to version 5.0.38 HANGS (freezes) all the time.
    I?ve done this like 7 times already? same thing.
    (my current Version is 5.0.25, a bit old)
    Please take a look at this movie, it'ss short and small.
    http://web6.streamhoster.com/em2253/...GradeHangs.wmv
    Details: I?ve done this several times already. I made this movie hoping it will save time and help all of us, especially those who might be having the same problem.
    ?Between a hard rock and a hard place!? Because my Creative MediaSource5 is a bit old? And I am having problems with it, for that reason I want to upgrade it to the next version 5.0.38, BUT.. of course.. the ?upgrade itself? hangs every time I?ve done it's. so? No upgrade J
    It?s actually ridiculous? nothing works well after 20 hours of hassling with this!
    TIA
    em
    Message Edited by em2253 on 2-3-20060:0 AM
    Message Edited by em2253 on 2-3-20060:2 AM
    Message Edited by em2253 on 2-3-20060:2 AM
    Message Edited by em2253 on 2-3-20060:49 AM
    Message Edited by em2253 on 2-3-2006:46 AM
    Message Edited by em2253 on 2-3-20060:6 PM

    micromouse wrote:
    Good to hear that it worked for you too. As for "CMS5_BRNR_PCAPP_LB_5_0_3.exe", it is the CD Burner plugin that allows you to burn your MP3 into audio CD or into MP3 data CD. I am not sure why you encountered the installation error. Just curious. hat is your operating system, language of the operating system, any service pack installed?
    My system, put together in 2/5/2004?OPERATING SYSTEM: Windows XP home edition, Version 2002?(w service Pack 2)
    IE 7.0 -- Motherboard: ASUS P4P800-DX 865PE DDR 400 AUD LAN 394 SATA 8X/4XAGP INTEL 478 -- Cpu:INTEL P4 2.8 800 FSB RETAIL -- Ram: CORSAIR TWINX024-3200C2PRO (2pcs 52) -- HD:Maxtor 200GB 7200rpm SATA / 8mb cache DiamondMax Plus 9 -- MP3: Zen Vision M (30 Gig) (purch on 2/23/2006)
    ?2- Well, I have been trying again to transfer songs to my Zen and I have NOT noticed any improvements with the upgrades... I have never seen my system misbehave so bad with any other applications... SOMETHING is making my computer act in such a weird way. Example. click on a Creative Icon... And it does not open until 0 seconds later. On the CMedia Explorer.... It is so erratic... click on Icon and the "sand clock" pointer goes on for ever... I keep getting all kinds of weird errors. How about you? Do your applications work ok? Is your system stabable (when using creative apps)?Message Edited by em2253 on 0-0-2007:30 AM

Maybe you are looking for