Creative zen micro help!!

I just bought the micro and my xp with sp2 doesnt want to recognize the player, i've already installed all the software, but when it came time to download the new firmware off the cd it wont recognize it as being there at all. does anyone have any tips for me its kinda frusterating because i've been at this for around 4 hours straight and tech support isnt open on weekends so that really sucks :angry:

OK. I have unistalled and installed, and uninstalled, and installed, and uninstalled, and installed... [you get the point]
The device still is not being recognized.
I have even taken the opportunity to swap out my USB cable. I have also downloaded all the devce driver updates.At this point I think I am beyond frustrated.
What else can I do [besides return the product]?

Similar Messages

Help with my Bran-New Creative Zen Micro Photo. [Questi

<EM>If you don't want to see the backing of my whole story skip to the bold print at the bottom!</EM>I also want you to know I read the FAQs and searched through some topics like this, but haven't found any asking my question.First of all, I'm new to the forum, but I've been researching Creative's Zen for a long time now. I kept observing each one closely before I purchased a product. I then saw the Zen Micro Photo come out. This one won my attention. I loved this, I quickly searched for reviews and went for the buy for Christmas. I told my dad about it and he was "iffy" on the price, but it was better then the iPod in my opinion.Christmas day came and I opened it. Right away I checked everything out I knew a lot about the menu already and all, but not really how to control it. I checked to make sure everything worked. All systems were go. After listening to the defaults (which I loved) I went to go install the software. I already had Media Player 0 and Adobe, oh and I didn't want the freakin AOL toolbar! Lol, so I installed everything else. It took forever, but I hooked it up and I installed the drivers, but as soon as I plug in the USB connector I see: "A HIGH-SPEED USB device has been plugged into a LOW SPEED USB port.After that, I switched USB ports, btu I got same message. I hit the X and then tried to charge. I got the Lightening Bolt, but no dimming of lights. I found out that this computer is not letting me install any service packs, I'm confused about that.My question:Is there anyway I can charge this mp3 player and download music onto my Zen Micro Photo without Service Pack ? Or did I just pay $250 for a really cool glowing mp3 player to be used as a paperweight? (I love this Zen and I ran the battery dead hoping that would make the charging easier).Help?
My Specifications:
My Mp3 Player: Zen Micro Photo (Black)What I tried: Switching USB ports and re-installing Service Pack Software: Not sure how to determine firmware without installing something. I'm on a XP Professional and I'm using the Creative Media Source and Creative Media Toolbox

Thank you DM for responding. I am expecting problems, but it still won't allow me to charge the Zen Micro Photo or even use the Creative Media Source. I can't upload any songs or any contacts on it. I haven't uploaded anything yet, but it's not reading the USB device. When I run Creative Zen Micro Photo Media Explorer I get this message at the top of the screen: "The device is not connected. Please connect your Zen MicroPhoto to the computer. I can't organize anything or add songs... so it just makes all the programs I downloaded useless and my Creative product unusuable.ONe thing it does do though... whenever I plug in my Zen MIcroPhoto to the USB it turns it on and glows, but only shows my battery at the top with one red line and the green lightening bolt filling the battery up.After leaving it like this for two hours the green moves, but the red bar stays the same size.

Creative zen micro please help me

ok heres the story. st time on my creative zen micro it said firmware problem...thanks to you guys and your help I got it fixed. now it says firmproblem again but when its says that it goes stright to recovery mode and when i connect it the firmware app does not reconize it and says please connect your player. I contacted creative but they said you neeed a recipt and if it said to KEEP RECIPT in big letter on the manual i would have kept it but that was about 9 months ago and they said they can't help. did i just waist $200 for nothing?
this is the 3rd time i posted bout this
NOW WHAT DO I DO? please please please help...
ps sorry for the bad grammer and spelling

I just received the same problem,how do I fix it's

Having big problems with Creative Zen Micro Photo!! I need much urgent help!

Hi. I am having a big problem with my MP3 Creative Zen Micro Photo device at the computer.Here is the thing:Before I bought this I had the regular Zen Micro & having fun with it. I had no problems with that when I used the Media Explorer to transfer songs. So I bought the Zen Micro Photo & installed it my computer. As normal I used the Media Explorer to transfer songs & pictures.So I reinstalled Windows XP at my computer, and when I installed the CD that followed to transfer new songs, the Windows said that it's an unknown thing I have connected in the USB.So I installed Service Pack & 2. I have tried to install drivers from the cd but it seems that there are no drivers on the cd! The big problem is that when I connect the MP3 to the computer, it doesn't read it's a Zen Micro, it's just unknown! So the Zen Micro Photo Media Explorer program doesn't work & I can't transfer songs or picture on it! And it just happened after I re-installed Windows on my computer. The same thing happened on my brother's computer after he re-installed windows. And when I connect the MP3 to the USB, it says that it's not a USB 2.0, but .! And I am sure it is 2.0 because it has always been like that before I re-installed windows. Also the MP3 does not re-charge when I put it my computer! The battery is just the same, it tries to do it but it doesn't. So I am using my sisters computer to charge the MP3 & transfer songs. I have tried everything but I can't seem to understand what the problem is? I have never experienced something like this before, and I really hope you can help me with this! To be honest I think what I am missing is the driver. So can someone PLEASE provide me the link for the driver? I have downloaded all those 3 on www.creative.com, but they are none of them! Also that playforsure firmawre thingy does not work because it sais that I have to connect my MP3, and it is connected already!Please reply as quick as possible! Thanks a lot for you kind help!
I have also sent this mail to creative support! But please help me I have had this problem for almost 2 months now! =(Message Edited by anakwalajinn on 05-0-2006 08:47 PM

Might try this:? http://forums.creative.com/creativel...mp=true#M95059

Creative Zen Micro and Podcast

I want to subscribe to a series of National Public Radio podcasts on a tool (maybe iTunes but I don't think the Creative Zen Micro works with iTunes) and be able to easily sync these onto my player. I have a Creative Zen Micro about a year old (or more?).
Does anyone subscribe and download podcasts to the Zen Micro that can post a How To? I open the Creative MediaSource Tool and can see the podcasts I want to sync to my mp3 in the "now playing" window but don't know how to get them to upload to the mp3.
Thanks for any help.

I want to subscribe to a series of National Public Radio podcasts on a tool (maybe iTunes but I don't think the Creative Zen Micro works with iTunes) and be able to easily sync these onto my player. I have a Creative Zen Micro about a year old (or more?).
Does anyone subscribe and download podcasts to the Zen Micro that can post a How To? I open the Creative MediaSource Tool and can see the podcasts I want to sync to my mp3 in the "now playing" window but don't know how to get them to upload to the mp3.
Thanks for any help.

Mp3 Player not detected in Vista ,I need drivers for Creative Zen Micro in Windows Vista 32-b

Hi ,?Im trying to install my Creative Zen Micro in windows Vista , But A Compatibility Problem appear and i can't install it .Windows Show me that a new hardware is found? and what i have to do , i Install it with the CD , but The installation can't be successful and a message saying me i have to contact Creative Support for the dirvers appear and the installation can't be completed. I've tryied to contact creative suport , but they don't find solution . I've searched the drivers but they wasn't found in creative site web . If anybody Have a solution for install my zen micro or can help me , please ... I have to buy another Mp3 Player ? This have a solution ?Thanks ,i hope that you can help me. Regards

I updated my Firmware as stated by Creative Labs support team. I downloaded on my son's PC which has Window's XP Pro edition. Again, on his PC there is no problem with recognition of the device and/or player. However, when I plug my player into my PC which has Vista, the device manager has a "!" next to ZEN Micro Photo. So my PC "See's" the player. However, when you right click and then go to "Properties" it states that "The drivers for this device are not installed (code 28)" Then it states to "reinstall the drivers" But when I tried to install or reinstall the "Driver" using the install wizard, I get an error message... "An error occurred during the installation of the device" and " A service installation section in this INF is invalid" Then a pop bubble appears and says "Found new hardware" You may have a problem with your device. It may not be working properly" So what do I do at this point. The only way for me currently to download music is to use my son's PC. At least I have another option... I feel sorry for the rest of you. When will creative wake up and smell the Vista!!

CREATIVE ZEN MICRO and WINDOWS VI

I hope this question has not been repeated.
I have a Creative Zen Micro and have attempted to install it on my current computer that uses Windows Vista 32-bit. However, it was unable to install or find the driver necessary.
I've already looked at the 'driver release plans'?for this product and there is only a page regarding 'Nati've Support', which says 'The MP3 products ZEN Micro, ... require the latest firmware to ensure Nati've Support in Window Vista'.
I've searched for firmware for the Zen Micro on a Windows Vista 32-bit in English, and found nothing.
How can I make this product work with my Windows Vista 32-bit computer ?
Thank you !!!

Robby & Lizzy
First of all for a little background information, the problem lies in a problem between Creative's firmware installation program and Windows Media Player . WMP is standard in Windows Vista. As a matter of historical information, Creative has not developed any drivers for Windows Vista, therein the rub; Windows Vista does support the Microsoft PlaysForSure initiati've, and many of the older players like the Micro series does have PlaysForSure firmware available to enable the player to be used in Windows Vista.
Now for an outline of the necessary ste
ps.
Back up all of the content on your Micro. The firmware that you will install includes a disk format that will erase all of the content and change the way that the disk dri've on the Micro is formatted.
You'll need to find a Windows XP system that does not have Windows Media Player installed. You or the owner of the system should also be knowledgeable in the use of Windows XP System Restore feature so that you can return the system to it's previous state after you are finished with it.
Create a Restore Point on the XP system. Download and install the drivers for your Zen Micro to the XP system. This will enable the player to be recognized by the computer.
Download the PlaysForSure driver for the Micro, V2.2.02, to the desktop of the XP system.
Connect the player to the system with a USB cable and execute the program.
When the firmware installation has completed, the player will reboot. You may disconnect the player. After you have confimed that the firmware revision is correct on the Micro, do a System Restore to put that system back in the condition that you found it.
Connect the Micro to your Vista system and it should recognize the player and install the nati've Windows PlaysForSure driver and pair it with your Micro.
RobbyBobson wrote:
Would it be possible for someone to post a step by step guide that helps me understand what exactly I have to do to get my Zen working. Help would be much appreciated.

Creative Zen Micro

I have just recently subscribed to iTunes and have downloaded my first podcast. I want to put it on my Creative Zen Micro but I can't figure out how.
Help!
The Zen is connected via USB and the computer sees it, but it doesn't show up in the "Source" menu on iTunes.

wasn't itunes made for ipod's ??????

Creative Zen Micro 5GB: Freezing on transfers & during playback (Please He

Ok, Here is a problem I am having.
My Zen is freezing no matter what program i use to place music on it.
The transfer will begin and rarely get or 2 songs on but more often it will reach about 30% on the first song, freeze and remain here till i unplug it and go into recovery mode by taking the battery out.
THINGS I HAVE TRIED:
*Changing the firmware (at least 0 times for each firmware available on this site)
*Formatting & Defragging (Don't even get me started how many times)
*Using different software (WMP0, Creative Sync and Every other one included with Creative Zen Micro Explorer)
*Upgrading software
Now i am a qualified electronic repairer and i have dismantled my zen and a friends (whom dropped it and bought a new one) i have from here changed the hard dri've thinking this may be the source of the problem (yes i am aware the warranty is void now but when i placed the battery in the first time i got it the sticker broke) This has done nothing so i have placed the original HD back in.
I have NO idea what to do now!
I can not afford a new mp3 player, have no warranty YET i do have the ability to repair this by myself.
If anyone has ANY suggestions whatsoever i am willing to try them, of course still sensible.
Please PLEASE PLEASE! help me out. i will be gratefully for any help i can get.
-Norb

/being venting
Why does Creative make it so easy to Reload the firmware, and why do soo many people choose this option!?!?!?
/end venting
pdk, your task now is to get your computer to recognize your player. I have a feeling that you are using a v2 firmware. Do you see the words MTP Device anywhere when you connect the player to your computer? If so then follow the steps listed <a href='http://www.nomadness.net/modules.php?name=FAQ&myfaq=yes&id_cat=8&categories =Nomad+Jukebox+Zen#228' target=_blank>here[/url]. Then use the firmware provided on your CD and see if it can recognize your player. You might have problems since you choose the Reload firmare option in Recovery Mode.

Creative zen micro. h

I am trying to install my creative zen micro witout the cd by downloading the drivers and when I go to install it tells me that i have an error and to come to support and quote "l-00" , can any body help me?

andy23 wrote:I am trying to install my creative zen micro witout the cd by downloading the drivers and when I go to install it tells me that i have an error and to come to support and quote "l-00" , can any body help me?
If you are getting errors when installing this suggests a problem with the Windows install. Have you tried the install CD?

Creative Zen Micro: Driver problems and mo

Hello, hope somebody can help me out a bit here.
My Creative Zen Micro seems to have stumbled rather severely. I get a firmware error and the recovery menu. I've tried the Clean Up tool, Formatting it, and reloading the firmware doesn't work at all, as the Zen won't connect properly on my Win2k box (probably due to the lack of support for it on Win2k).
It does connect (sort of) in Windows Media Player, which is where I transferred most of my music to begin with, though now it displays nothing in the contents of the Zens harddisk (obviously this was before I formatted my Zen).
So I tried installing the drivers on my new computer which runs Windows XP SP2. The drivers install, but Windows doesn't seem to care. When I plug in the Zen I get a "Found New Hardware" message, however it can't seem to locate the drivers I just installed.
I think I might be able to get things going right if only the drivers would work on WinXP. Or it might just be that the Zen is totally borked. I'm unsure.
Any thoughts?

Really hate to bump my own thread.. but.. anyone have any ideas what to do?

Problem with Creative Zen Micro software detecting certain C

Hi,
I hope someone can help me. I recently purchased a Creative Zen Micro MP3 player. So far, I have very few complaints, apart from the fact that while travelling on the bus, it won't seem to detect any radio stations.
The problem re: the software though is that it will only detect the last track on three of my CD's. None of these CD's are damaged in any way, but all are from the same record label. Anyway, I was wondering if anybody had any tips on how I might be able to transfer these albums onto my player?
Thanks a lot.

My zen micro problem:
Brief Problem description :.When I put a battery in the Zen micro, it automaticly turn on andshow "hardware problem" and freezed.2. If I connect to power adapter, i it automaticly turn on and show"hardware problem" and freezed.3. If I connect to my computer via usb cable, my computer can not findthe player and the player do not turn on even I switch on. As long asI put the battery in it, it automaticly turn on and show "hardwareproblem" and freezed. My computer still can not find it. I'm sure thecomputer and usb cable is working because all of my other device isworking ( include mouse, keyboard, logitech web camera, canon digitalcamera, samsung 52MB mp3). I try to take off all of theother usb equipements and the zen micro still not work. I can not rewrite the firmware because the zen micro freezed at"hardware problem" and my computer can not find it.
Help!!!!!!

Major audio problems with Creative Zen Micro 6Gb... need h

I have had this device for about a year and a half. about a month or 2 ago, there has been problems with the headphone jack. If the base of the headphone cord (all 20 of them i tested) moved, the audio will either go mono-tone, or play a signle layer of the audio file, or no audio at all. although when applying pressure to it, it will play well. I do NOT want to not go hands free just to enjoy my music, so please help me out!
-Bash

Although a failed power switch is not unknown, I only recall seeing two or three other cases of this. It's not common.
If WMP isn't working with the device having v2 firmware something is wrong. Unfortunately this can be difficult to fix, but take a look here in the Zen FAQ at Nomadness.net.
MediaSource won't detect the player if there's some issue e.g. WMP0 not detecting it. You can of course also try installing Zen Micro Media Explorer (Creative Zen Micro Media Explorer Web Update to be specific) which has MTP support.
Are you are presumably under guarantee, and as you bought from an Internet store, it's best to return it direct to Creative. Contact Creative Support to arrange this.

Creative Zen Micro it's not detected by my

My?Creative Zen Micro?it is not detected by my computer and I cannot update firmware,? somebody can help me?

to connect with a bluetooth device the iphone have not connected to before the bluetooth device
have to be in discovery / pairing mode you should read the manual of the kit for how you go about doing that

Creative zen micro transfer prob

When using Napster to transfer songs to my zen micro mp3 player the following happens.
License storgae is not working.Contact microsoft product support.
When I hit click here for more information nothing happens.
It has worked previously without any problems! Can anybody help??

Here is a list of things to check:
) Confirm you have Windows Media Player 0 installed on your XP SP or later system.
2) Confirm your Zen Micro has the latest 2.x firmware (2..02 Beta or later). The .x firmware does not support N2G. Download the 2..02 Beta firmware from http://us.creative.com/support/downloads
3) Confirm KB8922 "Update for Windows Media Digital Rights Management-enabled players" is installed on your XP SP or later system with WMP 0. See http://support.microsoft.com/default.aspx?scid=kb;en-us;8922 for details.
4) Confirm your Zen Micro's system time is synched to the system time of your computer.
5) Confirm XP and the Napster client recognize your Zen Micro is connected. It should display under the "Portable Device" object in the "Library" window of the Napster client. The Zen Micro Display should read "Docked". See if you can transfer files using WMP 0. Confirm the Creative Zen Micro Media Explorer version .00. ( http://us.creative.com/support/downloads ) can access your Zen Micro. Can it transfer tracks to the device?
6) Confirm your firewall is not interfering with the connection to Napster or to the internet for current date and time. Consider disabling firewall, Antivirus, and Spyware Scanners as a diagnostic step to troubleshoot your transfer issue.
7) Consider reinstalling Windows Media Player 0 and KB8922.
8) Check the USB cable connection. Determine the USB chipset on your system. There are forum threads where users resolved transfer problems by installing a new USB Adapter with a different chipset or determined the problem was the USB cable. You can also troubleshoot by attempting the transfer on another computer (if available).

Creative zen micro help!!

Similar Messages

Maybe you are looking for