Sales order BOM is not reflecting in sales order

Hi Guys,
I have created a sales order in which all the items of the sales BOM (ex:A-a1,a2,a3).have been exploded.My strategy is make to order and i am dealing with valuated stock.
Now i have created sales order BOM for that particular sales order thro cs61.I have made some changes in the item level (ex:A-a1,a4,a5) in the order BOM i want these changes to be reflected in my sales order is there any way to do so...
RAMASWAMY

Dear,
You have to configure BOM explosion in VOV7 - item category settings - BOM area and you can specify whether it is a single level or multi level explosion etc., Depending on the configuration made here, the BOM explosion takes place in the order.
Regards,
R.Brahmankar

Similar Messages

  • Tax value not reflecting in Sales register

    Hi All,
    i created an order and Invoice is also generated for the same. but the TAX value for the order is not reflecting in sales report.
    i checked in V/08 the print option is ticked. what can be the problem what setting i should do to get that value in sales register?
    Thanks
    Ashwini

    Hi Ashwini,
            You mean to say output (sales register) ? if yes please check you your output program with help of ABAPer,check the condition type and value whether its picking the condition value or not.
    Thanks
    Ram

  • Not reflecting the sales offices for top down manual planning hierarchy

    Hi Experts,
    Please help me on this issue.
    I hava an Hierarchy like from District to Offices
    for eg: for district-                'ZBHDEL' I have salesoffice like 100, 101, 102, 103,105.
    like wise for other district          'zbhyd' i have salesoffices like 200, 201, 202.
    I have created the Mannual layout with Hierachy datamodel with BPS characteristics, TOP-DOWN, AND enabled check entry.
    In the additional setting i have select All Possible combinations.
    District at Headerlevl, along with Product and Division
    and selected salesoffice at Leadcoloumn.
    My Planning levell and package contains : for sales office slected Hierarchy at planning level. 
    BRAND
    Base Unit
    Company code
    Country
    Currency
    Division
    Fiscal year/period
    Fiscal Year Variant
    PRODUCT
    SIZE
    Sales District
    Sales Office
    Segment
    Version   
    *The Prolem is when i input some plan for a district ZBHDEL from the other layout, WHEN I RUN THE sALES OFFICE hIERARCHY
    Mannual Layout its not reflecting the sales office where i have to plan for the salesoffices by seeing the values
    of planned District.
    where as for one district i can able to see the sales offices. even i have maintained the masterdata at Infoobject level.
    Can anybody please help me out.
    thanks
    Deenu
    Edited by: deenu prasad on Aug 4, 2010 7:07 AM

    Create hierarchy for sales district info-object in following way.
    Sales District         Text Node                          Level 1
    Sales Distirct         Characteristics Node         Level 2         
                                  value 1 = ZBHDEL
                                  value 2 = ZBHYD
    sales Office          Characteristics Node         Level 3
                                  values will be according to district (include diff sales offices for diff districts in level 2)
    restrict district to this hierarchy in planning level and plan according by both approaches (create 2 seperate layouts):
    Top down  - to plan at main node i.e. sales district
    bottom up - to plan at sub node  i.e. sales office

  • Credit check not reflecting in sales order level

    Hi,Experts,
    I have configured a dynamic credit check,but even if the credit limit for the customer is crossed,still it is not reflecting in the sales document level,and allows me to create the sales order.please guide me as where should I check the error in the system,
    Thanks in advance,
    A.Chakraborty

    yes it is active for order type,and active for item category,as well as the dynamic credit check setting that is the combination of
    risk categoryccaccgrp(for sales order) ,is also done,still when the sales order is created,and even though the credit limit has crossed it is not throwing any message ,which is supposed to appear in the sales order,when we are going to save...
    please revert bach to me,to guide me about any further areas i need to explore within the particular area so far as the setting is concerned.
    Many thanks,
    Anshuman

  • Service order component not reflecting in sales order

    Dear All,
    I have mapped service notification type & service order type now if i create sales order directly from the service notification sales order is not reflecting the componets assigned in service order for that service notification. can anybody help me out?

    Sanjay,
    This is not standard, although it is possible through development (e.g. via action-box).
    However, there is the advance shipment functionality in the service order which does allow you to create a sales order from the service order components...
    PeteA

  • Incoming orders in COPA not working if Sales Order blocked for Credit Check

    Hi all,
    We need to build a report showing all incoming sales order by entry date and/or change date (change of values or quantities later on). COPA allows to do this, but the problem is that COPA line item table is only updated if the sales order is released from credit check (VKM3). I am looking for a solution to be able to record sales orders in COPA even if they are still blocked for credit check. By doing that we will be able to report all sales orders entered from COPA and provide basis for commissions calculation to the business.
    I have investigated possible COPA enhancements like COPA0005 but it doesn't seem to be used at the time of sales order save.
    Thanks.

    Hello ,
    Thanks for the reply
    As you said , the credit check in the service order is information message "Credit check (maximum percentage for ope
    exceeded)" .
    If you enter and come out this message then one more message will come , i.e., "The business transaction can not be carried out" detail message -  System status CNOK is active (ORD XXXXXXX).
    with the above message , system will not allow to do the Service order release.
    In this particular case , we have done the VKM1 for the sales order to unblock the order from credit check . But again system is checking the credit check at service order (created w.r.t sales order) . we are not able to control this .
    we also suggested the solution to the customer , saying removal of credit check for service orders . But customer requires credit check to happen at both the documents.

  • Sales Order no is not displayed in Sales Invoice

    Hi Experts,
                     I  want Sales Order No to be displayed in Sales Invoice of PLD. How could be done? Please guide me.

    Hi Shailesh......
    Please do this...........
    Create a UDF in SO and apply the below FMS in this created UDF.
    Select $[ORDR.U_UDF.0]
    This will copy the SO no. in this UDF and when you copy this SO to Delivery or next document this SO in UDF will also flow in Invoice and from there you an get it into PLD......
    Regards,
    Rahul

  • Sales document type is not defined for(sales org/division/distribution chan

    Hi Friends,
    I am getting the error that sales document type is not defined for x/y/z(sales organisation/division/distribution channel). while creating sales order.
    Any pointers will be rewarded.
    Regards

    Hi there,
    When you define a sales doc type in VOV8, you also should assign that to the sales area SA (sales org / dist channel / division).
    Only then you will be log a sales order for a sales area.
    Check if you have done it. You will find it in SPRO --> Sales & Distribution --> Sales --> Sales doc header --> Assign sales doc type to SA.
    Regards,
    Sivanand

  • Amount in PR not reflected on Internal Order .

    HI SAP,
    When i creating a PR i got sap message said "Do Not assign any objects in cost accounting to account XXXXXXXX ". Then i just press enter because it just a warning from SAP.
    My total Valution Price in PR is 10K. My PR is using Account Assignment A and have internal order (BUDGET)
    After saving. i check my internal order report (S_ALR_87013019), than i noticed that my total amount in PR is not reflected on My internal Order list.
    is there any condition missing ?

    >
    Nizamkz wrote:
    > HI SAP,
    >
    > When i creating a PR i got sap message said "Do Not assign any objects in cost accounting to account XXXXXXXX ". Then i just press enter because it just a warning from SAP.
    >
    > My total Valution Price in PR is 10K. My PR is using Account Assignment A and have internal order (BUDGET)
    >
    > After saving. i check my internal order report (S_ALR_87013019), than i noticed that my total amount in PR is not reflected on My internal Order list.
    >
    > is there any condition missing ?
    The above warning message meant that your cost accounting is not configured for this account, in this case your account was not linked with internal orders, thats why it did not pick up the price there. You need to consult with FI to get this account fixed, or use some other account which is linked to internal order.

  • Changes made in BOM are not reflected in Configurator.

    Hi all,
    When i update minimum and maximum quantities in BOM, the new values are not reflected in the configurator.
    I have found a patch (patch# 4410573) for this issue in metalink and applying that patch did not resolve the issue.
    I have logged an SR with Oracle for this and Oracle support have asked me to run "Refresh Single Configuration Model" concurrent program and see if the changes are reflected.
    This program has 2 parameters one for folder and the other for Configuration Model Id.
    When i try to run the program, for any of the folders, the value set for the parameter Configuration Model Id does not show any values and hence i am unable to run the program.
    We don't have a separate instance for COnfigurator.
    Do i need to do any set up so that my Configuration model is reflected in the LOV?
    Can anyone please help me on this?
    Oracle Apps version: 11.5.10.2
    Configuration software build: 11.5.10.25.43A
    Regards,
    Sreekanth

    Hi Jason,
    Please see my comments below
    Jason said*
    Support is correct. If you haven't run the Refresh a Single Configuration Model concurrent program for your model, then the new BOM attributes will not be visible in your model. Changes to items/BOMs are not directly reflected in the configuration model. You must "refresh" the model to see the changes.*
    Even without running the "Refresh a Single Configuration Model" concurrent program, in some scenarios, changes are being reflected in Configurator.
    Ex:
    When i change only minimum and maximum quantities, the changes i.e. new minimum and maximum values are not reflected in Configurator.
    But, when i also change any of the following fields along with minimum and maximum quantities, new values are being updated in Configurator with out running the refresh program.
    effectivity_date, disable_date, component_quantity, planning_factor, component_yield_factor and optional class
    Can you please explain this?
    Also, i have already tried executing the query by commenting the enclosing_folder check. But still, the query is not retrieving any records.
    Basically, the sub-query that fetches devl_project_id itself is not retrieving any records.
    Jason said:+
    Based on the SQL above, the only criteria for importing a model is that the item under the folder must be:+
    a. A Model (PRJ = Project)+
    b. The Model cannot be deleted (Deleted_flag must be '0')+
    c. And the model must have been imported from Oracle apps, e.g. it cannot be a non-BOM model (orig_sys_ref is not null)+
    Can you please tell how can i check whether model is imported into configurator or not and if it is imported from where is it imported?
    Regards,
    Sreekanth
    Edited by: Sreekanth Munagala on May 12, 2011 8:52 AM

  • Purchase Order values are not reflecting in MIGO

    Dear Experts,
    I have changed standared Pricing Procedure from TAXINN to TAXINT because excise calculation was wrong. Now I have assinged new pricing procedure & reflecting in Purchase order & working as per requirement also.But when we are doing MIGO, excise values are not automatically coming in MIGO. So Is there any configuration or missing copy control because i have changed pricing procedure?
    Also I want to put a check, if purchase order value is not matching with vendor invoice value then stores person can't do the MIGO.
    Could any body guide me?
    Thanks
    Trupti

    Hi,                                                                               
    It is not like that you have to mandatory use the TAXINN rather it is recommended by SAP to use but if some business requirement doesnu2019t meet up with what is recommended that its business call to go TAXINJ from TAXINN, but right now we don't know at what circumstances they moved to TAXINJ but question is what are the settings missing while moving from TAXINN to TAXINJ and because of that system is not picking the Tax Values at the time of MIGO in excise capture & posting.
    So I have several questions in mind in order to understand your system behaviour.
    1) Are you using the correct Tax code at PO level?
    2) If using the correct Tax code then is't correct value maintained in FTXP for the Tax code used in PO.
    3) If correct Value maintained in Tax code then by clicking on Taxes button mentioned under PO item level details are you able to see the correct value against each applicable condition type in next screen by clicking over Taxes button in PO?
    4) if not then first check J1id - Material Chapter Id combination, vendor excise indicator mentioned, correct duties maintained in excise duty so check all master data related to CIN maintained in J1id
    So first give answer to above mentioned questions then we procees further but I am sure I can make your system to picked  the correct duties don't worry Just answer my questions hope things become fine in your system.
    Best Regards,
    Silky
    Note: Please assign valuable points in order to encourage contributors to each answer to queries...

  • Process order batch number not reflecting in corresponding inspection lot

    Hi QM gurus,
    I am working on inprocess inspection for production. I am creating process order during that time batch no is generated automatically by the system. Now process order is released during this time Inspection lot generated with inspection type 03. Now the problem is in the inspection lot, process order batch number is not reflecting. I have checked all the master data seetings. All seems to be fine. what could be the problem. any settings missed can anybody help me out.
    Thanks
    Vinameath

    Hi Vinameath,
    Go to the Master Recipe (C202) of this Process order/Material. Go to Recipe Header tab and click on the Quality Management Header button.
    Now,go to the Partial Lot Assign field and maintain the value " 0 Partial Lots not supported " and save.
    Then create a new process order and in all probabilities, the batch should appear on the in-process inspection lot.
    Hope this helps you!
    Regards,
    Vinodh

  • Pre-order purchased but not downloaded; no pre-order email and purchases not on cloud. Help?

    I purchased a pre-order for an album back in September, with a release date of Oct. 29. On Oct. 29, the album was displayed as "purchased" on the iTunes Store yet it did not download. I did not receive a pre-order email and the purchase was not on the cloud.

    I have the same problem :(
    Really wish someone would help

  • BOM is not exploding in Sales Order

    Hello,
    In Sales Order VA01, when i try to put my finished product it has an error message: ( Material 10001676 is not copied from the bill of material.)
    and the Diagnosis
    When the bill of material was exploded, it was established that no sales document item could be created for material 10001676.System Response
    The system ignores the material during bill of material explosion.Procedure
    Check if the BOM explosion can be used without material 10001676. If not, delete the main item which lead to the BOM explosion. You may be able to enter an item manually in which the material 10001676 in the BOM is replaced.
    How could i explode the FG material in the SAles order
    thanks

    Check whether you have created the BOM correctly or not.
    Create the BOM in t.code CS01.
    BOM usage "5" must be entered and specify your Plant.
    In the next screen,enter the components and their units/quantity and the BOM item category as "L" (stock material) and save it.
    Go to the material master of the BOM material, in the "Sales org 2" ,enter "Item category group" either LUMF or ERLA.
    If you want that the sub-items (Item category TAE) will be free and Main item(Item category TAQ) will be priced, then use Item category Group ERLA.
    If you want that, Main item(Item category TAP) will be free and sub-items(Item category TAN) will be priced, then use Item Category Group LUMF.
    Go to the Item category details (VOV7) for Item category TAQ and TAP, in field "Structure scope" ,enter value A or B as required from the drop down.
    Now, if you will create the order, the BOM will explode.

  • Condition type is not reflecting in sales orders

    hi,
    i have created two condition type like jser (service tax) and other one is jste(service tax +cess) but in pricing procedure jfact  it is reflecting but while making contract order these two condition type is not accessing.
    please help in this connection.

    Hi,
    After Creating the CONDITION TYPES you need to assign the condition types in the PRICING PROCEDURE
    goto the
    SPRO->FINANCIALACCOUNTING>FINANCIAL ACCONTING& GLOBAL SETTINGS>TAX ON SALES /PURCHASE>BASIC SETTINGS--->CHECK CALCULATION PROCEDURE.
    Here select you procedure and assign the CONDITION TYPE
    regards,
    santosh

Maybe you are looking for