Credit Controll area

Dear all,
I am using one credit control area for two company codes.
is it right?
if my customer is belong to both company code, i want to give credit limit different as per cmpany code then is it possible?
if i assign credit limit to customer then is it applicable for both company code & consider as a total credit of both company code.
Also is it consider all the values of order, billing from both company code while consider as credit limit.
Plz send me the details regarding the same.
Thx & Regards,
PM

Hello,
There can be one or more company codes under one credit control area, but it is not possible to assign a company code to more than one credit control area.
Within a credit control area, the credit limits must be specified in the same currency.
The credit limits assigned to customers in one company code are limited only to that particular company code.
Normally customers are created independent of the company code i.e. each company code will have their own customer master records.
But if you have the same customer in both company codes...........you can either create a customer master with same customer number with both company codes or with different customer numbers in the customer master record.
If you have the same customer number in both company codes..........then the system will not allow you to have seperate credit limits as the system takes into account the customer number and credit control area while fixing the credit limit (FD31) .
on the other hand if the customer numbers are different, then you have the flexibility to issue different credit limits in different company codes.
so any orders raised in that particular company code will only take the credit limit of the customer from the corresponding company code.
REWARD POINTS IF HELPFUL
Regards
Sai

Similar Messages

  • Payment History upload in Credit control area

    HI
    I am working on implementation project and my client requires to upload the Payment History in the credit control area. We are only updating the A/R opening balance from the legacy system and no transactions data are uploaded.  Please advise how to upload the payment history from the legacy system. 
    Regards
    Murali

    Hi Ravi
    Thanks for the info.
    The payment history is not an input field in FD32 and it is updated through an internal program based on FI payment posting in A/R.  My question was to find out whether there is any standard transaction to upload the payment history
    Regards
    Murail

  • User exit for merging the credit limit in different credit control area.

    Dear All,
    Please provide user exit for the merging the credit limit in different credit control area as well as logic for the same.
    I have to merge the overall credit limit of the customer for some divisions. At this time in one company code we have created 9 credit control area as per product line. While creating customer master data and Credit management (FD32) user has assigned the different limit with respective to credit control area e. g Customeru2019s total limit assigned is 10 laks.  For credit control 1100 Limit is Rs. 3 laks and for credit control area 2200 limit is 7 laks. Now the user wants to merge the credit limit for only above two credit control area. The sales orders should get created in any credit control area up to 10 laks.
    Regards,
    Suresh

    Dear Damodhar/All,
    Would you please explain me prerequisite setting from functional side for these user exit?
    I want complete functional setting prior to ABAP application so that it work properly post configuration.
    Regards,
    Suresh

  • TERMS OF PAYMENT AND CREDIT CONTROL AREA

    WHERE AND HOW EXACTLY TERMS OF PAYMENT AND CREDIT CONTROL AREA MAINTAINED IN CUSTOMER MASTER RECORD WILL REFLECT WITH EACH OTHER?  AND
    HOW DOES CREDIT CONTROL AREA CONTROLS THE
    TERMS OF PAYMENT OF CUSTOMER MASTER RECORD?

    hi
    1) terms of pay ment and credit memo----
    under customer master record, company code data, and payment transaction tab  there terms of pay ment field is there.
    2)FD32-----customer credit Matins
    regards
    sar

  • Sales Order Credit Account and Credit control area not updated

    Hi,
    I have a production issue. I have two sales orders created from Same Value contract, with same PO, same sold to party same payer. Both the orders created by same user at the same time.
    First SO has credit control area and credit account is updated but the second order did not update with this information.
    For first order, if I go to Environment -> Partner -> Display credit account, system taking to FD33 screen of the credit account.
    For the second order, above menu path giving message "Cannot display credit limit as no credit management account is available"
    Please let me know how fix the second order to rectify this issue.
    Thanks,
    Satish

    Hi,
    Goto OVAK T.Code.
    Assign credit check to your second sales order type.
    Assign the values from "A" to "D".Any value as per your need.
    Save.
    Regards,
    Krishna.

  • *Billing Document Splitting with Credit control Area*

    Hi
    please give me solution for the  following matter
    there have some invoice splitting with credit control area from sales order header , because some orders available credit control area some order not available credit control area . can i create one billing document for those without splitting?
    thanks
    L.C

    Hi L.C,
    You can see VBAK-KNKLI field differs in sales document. The split is standard system behavior since   
    these are header fields. Please refer to note 11162 for details on split criteria for invoices.                                                                               
    In order to avoid the split you can either clear the fields in the copy control or you can change your credit management              
    configuration so that the credit accounts determined are the same. 
    I hope it can help you.
    Regards
    Ruy Castro

  • Problem in credit control area

    Hi Gurus,
    We  have configured credit control area using Static Credit check.
    We have assigned the same to order type and delivery type also.
    While creating sales order, even though the total value is crossing the credit limit which is set in FD32. the system is not prompting any error.
    Please suggest, where we could have gone wrong..
    Sridhar.P

    Hi gupta,
    you need to check the following in customizing settings.
    Credit checks can run at different times during order processing.
    For delivery creation, you can additionally specify whether the automatic credit check occurs at the time of delivery creation and/or goods issue.
    In this menu option, you specify the sales document types for which a credit check should be carried out. Here, delivery types can be controlled separately and specifically at the time of goods issue.
    At the same time, you specify the system responses if credit checks are set. The system can respond in the following ways:
    •     Warning message
    The document can be saved.
    •     Error message
    The document cannot be saved.
    •     Setting a delivery block (credit status)
    The document can be saved. However a block is automatically set in the credit status.
    Actions
    1. Define for each sales document type whether a credit check should be carried out. Enter "D" if an automatic check should be carried out.
    2. Specify a credit group.
    3. Specify a credit group for the delivery type for which you want to carry out a credit check.
    4. Specify a goods issue credit group for the delivery type for which
    Reward points.
    Regards
    Manoj

  • Currency in credit control area - Urgent !

    Hi,
    The client wants to change the currency in the credit control area from SIT (Slovenian Tolar) to EUR ( Euro). Can somebody list the impact of changing the currency in the credit control area.
    Its URGENT !
    Regards
    Karpagam

    Hi,
    I don't think we can change the currency of Credit Control Area after the transaction data is posted. For the same Custome account part of the transactions will be in SIT and part of them in EUR. Even if it allows it leads to inconsistencies in the tables.
    Check whether there are any OSS notes for changing the currency of Credit Control Area.
    Probably, you can consider to set up a new Credit Control Area with EUR currency.
    Thanks
    Murali.

  • Assign Company Codes to new Credit Controlling areas after going live.

    Dear FI Experts;
    Our Status Now:
    We Have 3 Company Codes, CC 1000, 2000, 3000 and one Credit Controlling Area Code 0001, and the Customers are assigned to this Credit Controlling area with no problems and we are live since about 9 months ago.
    Requirement:
    We have a requirement to split the Customer Credit limit between companies, which means we have to create more credit control areas for example CCA 0002, and 0003, and though assign our 3 company codes to the new credit control areas, as follows:
    CC 1000 to CCA 0001
    CC2000 to CCA 0002
    CC3000 to CCA 0003
    And my Question is, what is the procedures to follow to do that (Not a Customization Procedures, I mean the How the Customers would be affected and the open items for them and how to resolve that), since as mentioned above we are already live since 9 months ago, and credit management is active and all our customers are assigned to our old Credit control area 0001, and also what is the consequence of doing that new assignment since we are live, thanks for your reply

    You will need to manage to create new credit master data under new credit control area. System should reorganize existing credit data after reassignment, that is when you change master data (create credit master under new credit control area), new credit exposure is calculated based on AR in company code and existing open orders will get rechecked for credit under new credit control area & new risk categories assigned to them.

  • Customer created in multiple credit control areas.

    Dear  friends,
    In our current system, whenever a business partner is created, the business partner is being created in all the credit control areas that are permitted for that company code, despithe business partner having only one credit control area assigned in the sales view of his business partner data.
    How can I control so that a business partner is only created against one of the allowable credit control areas?
    Henry

    Hi henry,
    You can mantain overall credit limit for customer created in all CCA's.
    Goto FD32, select CCA and central data, you can mainatin overall credit limit for all credit control areas (CCA) and current CCA credit limit.

  • FI-AR-CR Customer Sales per Credit Control Area

    Hi,
    Do you know any table or funtion that may calculate the Customer Sales Volume per Credit Control Area? I need to calculate a customer specfic DSO (Day Sales Outstanding) figure. The standard AR Summary doesn't return such information. This nay be obtained via BSEG, but it requires a complex query.
    I have found the function module CUSTOMER_BALANCE, but it returns customer sales per company code, which still requires additional calculation to totalize the balances for all the company codes that belong to a credit control area which the customer is assigned to.
    I appreciate any input that may provide a simplier solution for this question.
    Thanks and regards.
    Gonçalo

    Hi,
    I have decided to use the function module CUSTOMER_DSO_CALCULATION, and I will try get the sales volume from some internal variable that this FM uses to calculate the standard DSO. Then I'll store it on a  Z table in order to compute the new specific DSO
    Thanks and regards,
    Gonçalo

  • Different Credit control area in the AR invoice document

    Hi all,
    Our client has the line item display field turned on for the AR reconcilation account. When we run FBL3N for this account, we see a credit control area that is different from what is there on the customer line item in the invoice document.
    When the invoice was entered in FB70, the default credit control area (that defaults from OB38 - co code assignment to cca) was manually overwritten. The invoice document, FBL5N and BSEG table show the new cca, but for some reason FBL3N for the recon account is still showing the old, default cca.
    Did anyone come across a similar scenario?

    Hi Chait!
    I have the same problem do you get any positive response about this issue?
    Thanks in advance!
    Regards
    Daniel

  • Documents on Credit Control Area

    Hi SAP GURUS,
    I have to customize Customer credit control area.
    Any body has any relevant document in this regard please forward the same to me.  Points will be awarded.
    Thanks in advance
    SUBHRA

    Hi SAP GURUS,
    I have to customize Customer credit control area.
    Any body has any relevant document in this regard please forward the same to me.  Points will be awarded.
    Thanks in advance
    SUBHRA

  • Credit Control Area Management

    Dear All
    As part of Enhancement,  we are configuring the "Customer Credit management" with Credit Control area organizational object.
    Client has identified to use "Decentralized" Credit control management,  but however,  all comapny codes are assigned with one controlling area since implementation (since 2.5 years). 
    Though Credit Control area was assigned during implementation, it was actually not used.  Now they wanted to use the same.  However,  they wanted different Credit controlling area for different company codes.
    However,  If I am assigning new Credit controlling area now to respective company codes, then system is considering the AR transaction data posted from the date it is assigned.  but, we want new credit control areas to consider all the data from past 2.5 years.  Is this possible?
    If possible, please help, how to fix this.
    Your help highly appreciated
    best regards
    S Habib Pasha.

    Hi Habib
    There is a standard SAP program that lets you revamp all the entered data to their correct credit control area and the steps involved are:
    u2022     Table dumps of KNKK, S066, S067 on the old Credit Control Area
    u2022     Check and export the values from Report VKM4 to ascertain the number of blocked orders
    u2022     In SM30, Update the Tables T014n and T001cm
    u2022     Go to Transaction OB38 and assign your new CCA as default for the company codes
    u2022     Run the transaction F.28/RFDKLI20 execute without any parameters {check the test run output}
    u2022     Execute Program RVKRED09 {might not be required u2013 since RFDKLI20 does redo the credit check}
    u2022     Validate VKM4 for all blocked orders
    u2022     If there were any discrepancy between AR receivables and the Credit Master, it can be viewed by executing the Program RFCORR40
    Also make sure that if you are using the different CCA for the same Co Code, in OB38 - you have checked the 'Overwrite CCA'' check box.
    Hope this helps you; let me warn you - its a very tedious process and it might take a whole weekend to run this in a Production Client
    Good luck
    Rukshana

  • Credit Control Area - SAP ISU FICA or SAP Finance (ERP) ???

    Hello Experts,
    I was reading about credit control area which is basically - organizational unit that represents an area responsible for granting and monitoring credit. One control area can corresponds to many company code (though vice versa is not true).
    So my question is, in term of work order planning should I consider Credit Control Area as a part of SAP Finance (ERP) or SAP - ISU?
    Please let me know best reason to put it into any side. I want this information for planning purpose. Kind of vague question, my apologies for that.
    Thanks.

    Yes, you will be dealing with new transactions and with a different customizing, for example:
    Functional:
    Financial Supply Chain Management ->Credit Management->Rule for Scoring and Credit Limit Calculation and Check Rule
    Customizing:
    Financial Supply Chain Management->Credit Management->Credit Risk Monitoring
    FSCM Credit management is far more complete functionality than AR Credit management.
    Best regards,
    Cristobal.

  • Credit Control Area - SAP ISU FICA or SAP Finance (ERP) ??? and why?

    Hello Experts,
    I was reading about credit control area which is basically - organizational unit that represents an area responsible for granting and monitoring credit. One control area can corresponds to many company code (though vice versa is not true).
    So my question is, in term of work order planning should I consider Credit Control Area as a part of SAP Finance (ERP) or SAP - ISU? nd then in that case does it contols credit limit of end customers (ISU) or vendors (ERP)?
    Please let me know best reason to put it into any side. I want this information for planning purpose. Kind of vague question, my apologies for that.
    Also, it would be of great help if you give me any example explaination. Anything will do.
    Thanks.

    Yes, you will be dealing with new transactions and with a different customizing, for example:
    Functional:
    Financial Supply Chain Management ->Credit Management->Rule for Scoring and Credit Limit Calculation and Check Rule
    Customizing:
    Financial Supply Chain Management->Credit Management->Credit Risk Monitoring
    FSCM Credit management is far more complete functionality than AR Credit management.
    Best regards,
    Cristobal.

Maybe you are looking for