Credit memo billing document is not flowing in the order

Dear all ,
I have a problem, i created a credit memo request based on the billing, i have a seperate order type for returns and i have done returns order and returns delivery, based on the actual export sales i have done. The process of everything is flowing in the actual export sales order done , except the credit memo process .
I want to know wheather the credit memo process will be captured in the document flow of the order. or it wont be appearing in the document flow..
My docuument flow is giving all the process right from order to billing and the returns order till returns delivery but the process of credit memo is not showing , when i did the credit memo processing based on the export sales invoice.
kindly guide me on this
anitcipating reply from all
thanks and regards
kumaresh

Hi kumaresh,
Please note the following configuration for crating the Credit note with ref to Invoice :
1.Use T code VTAF:
Source Bill. Type ZF2
Target SalesDocTyp ZCR
DataT 053 Header bill
DataT 103
DataT 003
021 Billing header
Activate : Copy Itm No
For Item : example from TAN to G2N .
Every thing is SAP Std , activate Update Document Flow
Pricing type - D and Copying requirements 303
Please do the above settings and your peoblem will be solved
Veera

Similar Messages

Billing document are not flowing into FI and COPA

Hello SAP CO gurus,
please help me out by giving possible reasons why Billing document are not flowing into FI and COPA.
what are the settings need to check?
is there any option to get release by manual?
Initiatives rewards with points........
Regards
Chandra.

Hello Chandra,
Check whether any standard cost estimate is existing for that material for which your billing. If it is there then check whether costing key from COPA is able to access the cost estimate.
I am also working on the same issue but not solved yet.
regards
Nivas

Credit Memo - Accounting Document is not generating

Hi,
I have created a Credit Memo and removed billing block in VA02.
Now, in VF01 i generated the billing document. But the Accounting Document is not generated.
In VF02, when tried to do "Release to Accounts", it says " An Accounting document is not required for this Billing Document"
When checked the Pricing conditions in billing, at Header level there is no Value. But in detail level there is value for all condition types.
Also, during billing in VF01, when tried to check "Account Determination Analysisi - Reconcilliation Accounts", it says error message as "Accounting assignment analysis cannot be carried out for this Billing Type"
Can you please help me out on this.
Regards,
Ramki

Hi,
Please check the reason for value not flowing to the header data of the billing document.Once you get the value of the document tin the header , there will be no issue in creating an accounting document.
Check the item category of the credit memo.
Regards,
Phani Prasad

Credit memo billing document

Today we came to know that system not generating the credit memo billing doc # & accounting doc # for those credit memo order raised on 24th march. approx 42 credit memo order raised.
Actually once the credit memo order created in the system w.r.t original sale billing doc # then system will automatically generate the corresponding credit memo billing doc & accounting doc thru system batch job but here for those 42 credit memo order raised yesterday the corresponding credit billing doc not generated till now by the system automatically.
Can anyone suggest the cause

Hi,
Goto SM37, Give the JOB name and user name as * and execute.
Check the job and then click on Job Log to see the log of the job.
you can also check on the spool icon if you see a page like icon next to the job

Invoice/billing document Number not appearing on sales order document flow

Dear all,
After saving the sales order invoice when i check in va02 sales order document flow invoice number is not generating

Really something is wrong in your configuration. When your delivery status shows Being Processed, I could see subsequent two documents, viz.Confirmation of Service and GD doc reference as complete.
Can you let me know how many line items that delivery contains? The reason for this query is normally, for stock item, we see Material Document reference and for non-stock item, we see Confirmation of service. But in your case, I could see both. From your VBFA table screen shot, I could see two different material document references.
G. Lakshmipathi

The billing doc is not showing in the order documnet flow in SAP CRM 7.0

Hi CRM Experts,
Our CRM system has been upgraded from 4.0 to 7.0 recently.
We have come across with one strange issue; for some orders which are billed in ECC6.0 are not showing as next document in the CRM order under document flow in SAP GUI. Only preceding document and replicated document are showing in the CRM document flow.
Appreciate for yor valuable solution at the earliest.
Best Regards
Succhi

I have the same problem!!! Did anyone solve this???

The cost of billing document is not the same as GI cost

Dear Expert,
Condition EK02 in the billing document is not picking up the Cost of Goods sold at the time of goods issue.
We have a Made-to-Order Sales Order with a production order. The cost condition EK02 on the billing document is picking up the EK02 from the sales order. We would like it to pick up the actual cist of goods sold (cost on the goods issue).
Any help would be appreciated.
Many thanks!
Raymond

Hi Raymond,
My proposal: insted the condition type EK02 - Calculated Costs choose the condition type VPRS - costs.
I guess you want to transfer the costs into CO-PA ... if yes, don't forget to assign the condition type to a value field (KE41).
Have a nice day

SAP Revenue recognition Credit Memo Accounting document

Hi,
One of our client uses SAP Revenue recognition to post revenue. They have implemented the Service related revenue recognition (revenue recognition category B) and also process credit/debit memo with reference to preceding docuemnt
"F". Each month a debit memo is issued ot the customer for the services performed. Eventually we create credit memos when the customer disputes a particular debit memo invoice. Debit memo and credit memo documents
are created with DP96.
The issue they have currently is with the credit memo account document postings. Client credit memo accounting documents are making postings to unbilled revenue accounts. The postings remain as debit postings in unbilled revenue accounts even after revenue is recognized for an order. According to them accounting rules do not fulfil with the credit memo postings to the unbilled revenue account. Hence we need your expert advice/opinoins.
Please reply as soon as possible because its very high priority issue.
Thanks & Regards
K.R.

Hi,
Please check the reason for value not flowing to the header data of the billing document.Once you get the value of the document tin the header , there will be no issue in creating an accounting document.
Check the item category of the credit memo.
Regards,
Phani Prasad

Billing document should not be cancelled after creating return sales order

Hi All,
Billing document should not be cancelled after creating return sales order with reference to billing document. Please suggest configuration settings on the same.
Sudheer.

Hi,
In SAP, when the sub-sequent document is existing , we can not cancel the preceeding document. Therefore if you want to cancel the billing document you need to calcel the documents which are created with reference to that.
Check and confirm.
Regards,
Ravi Duggirala

Excise Invoice creation error -Billing document does not exists

Dear Experts,
I have created supplementary sales order, billing with refernece through sales order by VF01.
Now I want to create Excise Invoice but system gives error Billing Document does not exists
I have checked billing document in VBRK table & it is showing in table.
My item categroy is L2N -and set it to C
I have assigned Billing type under Outgoing excise invoice ->Assign billing type to delivery type still my excise invoice is not generating.
Pl. guide me.
Thanks
Trupti

Resolved my problem.
Actually in Billing item categroy if you put SD Doc. Catg. as M you can do excise invoice even if you have not created the
outbound delivery.
So cycle will be Supplementary Sales Order->VF01 with ref. to SO->J1IIN -Excise invoice creation.
Thanks to all.
Trupti.

Billing documents should not be created when it is not released to accounti

Hi SD gurus,
In some situation, billing documents are generated but it is not released to accounting which results in mismatch between FI value and SD value. We go to VFX3 and see the list of billing documents and take corrective action.
Our requirement is that the billing document should not be generated when system is not releasing this billing document to accounting.
Please suggest a solution for this.
Regards,
Senthil.

Thanks giri.
For the following reasons, the billing documents are not released to accounting.
1. If the user wrongly chosen the billing type for the delivery.
2. After creating condition type, it has to be assigned in COPA. If we forgot to do it, billing doc will not released.
Our requirement is that if the billing document is not able create accounting document, the billing document itself should not be generated.
Hope this will be suffice to understand my issue and suggest a suitable solution.
Points will be rewarded.
Regards,
Kumar.

Output to be blocked for Billing documents, if not released to Accounting

Hi SAP Gurus,
We have a requirement, where the Billing documents should not be issued output, if they are not released to accounting.
The system should not allow the user to issue output for billing documents, if not released to accounting.
Regards,
sree.

Standard routine 62 should be able to suffice your requirement.
Provided output determination in billing doc should happen from output condition record (VV31).
If you manaully assign assign output type in billing doc, then system will overlook the requirement.
In addition to that if your output type is assigned with requiremrnt routine 62 in your output procedure.
Then till your release tke billing doc to accounting, you will not be able see output type determine in billing doc.
If you have doubt, whether the output type is getting determined properly or not.
Then output(header/item) screen in your billing doc(VF02), in menubar select Goto - then choose Determin. Analysis.
It will show message that due requirement 62, output determination didn't too place.
Regards
JP

Billing document does not capturing basic amt. capture only duty part

Hi
while doing billing on customer
the billing document does not capturing the basic amt on , it only capture only duty part.
pl suggest , how resolve the prob.
Regard
R.Sharma

HI,
Check the pricing procedure, in that remove the statistic for the pricing condition then try,
i think will resolve the issue, pricing should not activate the statistic
Thanks & Regards
Rajasekhar

Billing document does not exist in VF22

Dear Experts,
   We are working on Invoice list it gives output with LR00.
but we have created a new output type ZPGR and assigned in
    SD>Billing>Billing document>Invoice List>Maintain Output for Invoice list
     Prgram-RLB_INVOICE and smart form ZS_INVOICE_PACK_2_GRP
and VF21 i was able club billing documents. but in VF22 while issuing output it give error 'Billing document does not exist'
checked and found because VBTYP in VBRK for invoice list document(LR) it is 3. but RLB_INVOICE program checking values MNOPSU56.
any idea how to deal with, is there any other program instead of RLB_INVOICE to assign smart form
Please suggest
Regards
Siva

Hi Sunkesula,
below is the sample Z print program.
i copy some of the code from RLB_INVOICE and change the sapscript calling method to smartform calling method.
REPORT Z_TEST.
INCLUDE XXXX. "you may define any include you want
INCLUDE XXXX. ""you may define any include you want
*       FORM ENTRY
FORM entry USING return_code us_screen.
DATA: lf_retcode TYPE sy-subrc.
CLEAR retcode.
xscreen = us_screen.
PERFORM processing USING us_screen
                     CHANGING lf_retcode.
IF lf_retcode NE 0.
    return_code = 1.
ELSE.
    return_code = 0.
ENDIF.
ENDFORM.                    "ENTRY
*       FORM PROCESSING                                               *
FORM processing USING proc_screen
                CHANGING cf_retcode.
DATA: lf_formname           TYPE tdsfname,
            lf_fm_name            TYPE rs38l_fnam.
* SmartForm from customizing table TNAPR
lf_formname = tnapr-sform.
* determine smartform function module for invoice
    CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
      EXPORTING
        formname           = lf_formname
*       variant            = ' '
*       direct_call        = ' '
      IMPORTING
        fm_name            = lf_fm_name
      EXCEPTIONS
        no_form            = 1
        no_function_module = 2
        OTHERS             = 3.
    IF sy-subrc <> 0.
*   error handling
      cf_retcode = sy-subrc.
      PERFORM protocol_update.
    ENDIF.
ENDIF.
"call the fm of the smartform. You may pass in any data you would like to display here
CALL FUNCTION lf_fm_name
ENDFORM. " processing

Billing Block removal not updated in the sales order change log

Hi Gurus,
A specific Billing Block is automatically assigned to the sales document header (VBAK-FAKSK) when the net value of the sales order is negative. This is an order related billing.
Sometimes the Billing block is getting released automatically and the Negative Invoice is getting created in the Background job run for creating the invoices. When we check the sales order, the Billing block is not existing and the removal of the billing block is not recorded in the Change Log of the sales order.In the CDHDR table also there are no details about the release of the billing block.
This is happening only occassionally. When I tried to replicate the issue, the system is not allowing me to create the invoice as long as the billing block is there in the sales order and if I remove the block, it is recorded in the sales order change log.
My doubt is.,
1. How the billing block is getting released automatically?
2. Even if the block is released, why it is not recorded in the Change Log of the sales order?
Looking forward your for suggestions and solutions.
Thanks,
Ravi

Hi
Did u check in sales doc. details screen.There u can block for billing.

Credit memo billing document is not flowing in the order

Similar Messages

Maybe you are looking for