Credit mgt issue -urgent

Hi folks,
i have got a problem w.r.t credit mgt.
the problem is :
open delivery value is showing as 1015106.13. in Tc. SE16  and then So67.
but there is only one open delivery (whose value is not this but less than this) in VL04.
I checked in SE16  and then LIKP, but found no open delivery.
In FD32,  "Sales value: field  is Showing as 1015106.13.
i dont know how this value is coming in FD32,  and thereby in open delivery as with the same value.
plz. provide me the soltn..
thanx in advance,
sourav

Hi,
First note that Open deliveries will not be shown on VL04.. VL04 is a screen to see the open orders... that is the orders which are not delivered...
I think you mistaken the open delivery's Meaning. This means that the sales orders which are not refered by delivery... so its nothing but the sales value...
Kindly check again...
Muthupandiyan
Edited by: Muthupandiyan on Mar 20, 2008 3:26 PM

Similar Messages

  • Credit Mgt. issue

    Hi,
       I have a small concern here, there is an Invoice which is not released to accounting and the error message states "Credit Control Area is not permitted to company code"
    This customer is not defined for that control area at all, and I am not sure why this error pops up, could someone please help me with this issue, a quick response would be greatly appreciated.
    Thank You.

    Hi Please
    Check the assighment ie assign credit control area to permitted company code,path is IMG>Financial Accouting >Accounts Recivabels and Payabels >credit manegement >credit control area> Assign permitted credit control areas to company code.and assign the credit control area to customer master Sales area data section billing tab delivery and paymetnterms section.
    please check this and let me know any for ther issues
    thank u

  • Process of credit mgt

    process of credit mgt configuaration

    Dear dev,
    please use this link for configuration
    http://www.sap-img.com/sap-sd.htm >credit managent >
    you find total info with tcodes
    regards
    natraj

  • Credit Card issue to create Deliveries

    Hi,
    Hereu2019s the situation. 
    We have 2 types of Orders.
    DROP SHIP ORDERS - The part to be shipped is actually in an inventory managed location. No transfer order need to be created. This sales order has a Credit Card that is denied.
    NOTE: The order has to be pre-authorized, and then Denied and then get picked from an Inventory Location.
    1. Use VL01N to create the Delivery.  No error (warning) message was displayed indicating credit card issues.
    2. Change the storage location on the line item to the inventory managed location and enter the delivery quantity.
    3. Press Save. A error (warning) message is displayed indicating credit card issue.
    4. The system lists the delivery number that has been created.
    5. Execute VL02N to view the delivery.  the delivery does not exist.
    TRANSFER ORDERS -
    1. Use VL01N to create the Delivery.
    2. You do not need to change the SLOC value.
    3. Press Save.
    4. A Transfer Order is created automatically and the Delivery exists.
    I copied BEDINGUNG_PRUEFEN_111 into BEDINGUNG_PRUEFEN_911 to make some changes.
    The problem is when I use the below code it works fine for DROP SHIP ORDERS. For TRANSFER ORDER, a delivery is created but a transfer order is not created.
    *** Attention: copied routine!                           ***
    *** Attention:                                           ***
    *** Character string 111 is replaced by 911 everywhere ! ***
    *       FORM BEDINGUNG_PRUEFEN_911                                    *
    *       User checks for subsequent functions from a delivery          *
    *       Picking                                                       *
    FORM BEDINGUNG_PRUEFEN_911.
    * Picking is not allowed if a credit block exists
    *  IF statement deleted                                     "n_566523
    *   document header
      IF VBUK-CMGST CA 'B'.
    *Read the subsequent function information for the message
        PERFORM FOFUN_TEXT_READ USING    GL_FOFUN
                                CHANGING FOFUN_TEXT.
        MESSAGE ID 'V1' TYPE 'W' NUMBER '849'
                WITH FOFUN_TEXT
                RAISING WARNING.
      ENDIF.
    ENDFORM.
    When I comment the below line TRANSFER ORDERS work fine but DROP SHIP ORDERS show that a delivery is created but actually its not created.
    RAISING WARNING.
    I tried using the debug but the program would not stop in this routine.
    I would appreciate your suggestions on this.
    Thanks
    Rakesh

    I looked into OSS NOTE 303052 as suggested by you and that's already implemented.
    Did you look at the part of the note that suggests changing the message from type 'I' to u2018Eu2019?  That is in the comments at the top and is a MODIFICATION that isnu2019t part of the note itself:
    If you want to prevent the creation of a delivery without sufficient authorization, you have to change the message type from 'I' to 'E'.
    You've probably already tried setting a break-point on the form itself, FORM BEDINGUNG_PRUEFEN_111, correct? 
    Turn on system debugging?
    Perhaps your form isn't being called at all?
    Regards,
    Eric Bushman
    www.paymetric.com

  • Credit Mgt fields

    Hi All,
    My client uses the standard fields in TR/3 credit mgt in a custom way. For example, the field "Credit Account" is used to maintain the Customer number. The "Customer Group" field is used to maintain Dealer code. Usually, these 2 fields are related. If Credit Account = PA12345, then Customer Group has 12345 (Just the Dealer code).
    Now, my question is how do i know what all customers are entered in these 2 fields from tables and field names. Usually, they have customers like PA1234, VR1234, DL1234 etc. I want to know if they have used these fields for all the customers and they match.
    I hope you understand my question and can provide me with an answer.
    I am not too much of an ABAP person. Want to know how to look for this selection criteria, excluding all other field names in table.
    Regards,
    Satya

    Hi,m
    Go to transaction SE16/ SE16N and check table KNKK.
    It contains the details you need, i.e. "Credit Account" and "Customer Group"
    Regards,
    SDNer

  • TS1646 I use and overseas credit card for purchases but Itunes is insisting on a credit card issued within NZ where I live.?

    Why can I not use and overseas credit card for purchases?  My account information is insisting on a credit card issued within my country of residence..?

    iTunes doesn't allow a credit card that was issued by a bank in another country (possibly because it's a way of confirming that you are able to buy from a country's store) - you will only be able to use a credit card issued by a New Zealand bank. Or you could use iTunes gift cards as your payment method, as far as I can see they are available in New Zealand.

  • HT1918 is there a way to talk to someone in person about a credit card issue?

    I've been trying for a couple of hours to reach someone about a credit care issue.  I've been sent to numerous web sites and many phones number thru the apple.com/support/itunes site.  I do not see any way to solve my problem with my card.

    You can contact iTunes Support via email via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • Installation issue -urgent

    Hai frnds
    I have got a new dell studio 15 laptop.iam much interested in oracle applications and for the purpose of learning oracle applications i got it.when i tried to install redhat enterprise linux 4 replacing windows xp on my machine it throws the error message as driver not found and the installation does not proceed.when i asked the computer dealers they said that i have to go for some newer rhel version for installing linux in my laptop since its a new brand.
    before few days i tried to install oracle applications 11.5.10.2 on rhel 5 but i got a lot of errors and the oracle forums advised me to go for rhel 4 for installing oracle applications 11.5.10.2.now iam confused and dont know wat to do .
    my aim is install oracle applications 11.5.10.2 on some newer version other than rhel 4 which supports my dell laptop
    i want to know whether installation of oracle applications 11.5.10.2 is possible on rhel 8 or rhel 9.will the installation goes properly.
    Thanks and Regards
    Parithi.A.

    Hi,
    Please see your other thread.
    install issue -urgent
    install issue -urgent
    Regards,
    Hussein

  • Can I use my credit card issue here in South Korea to purchased Ipad mini retina How much the shipment charge?

    I want to buy an iPad Air on this site but I am here in South Korea, because I find the price are cheaper here than the price in South Korea, is it possible to use my Credit Card issued here to purchased an item? how long the delivery date? May I know the surcharges. Tnx.

    Apple will not ship oversea.
    You have to buy from Korean Store.

  • Credit Card issues!

    I´m having a problem with credit card, I use the same credit card in the past months with adobe subscription, and this month they tell me to update my card informations, but everything is ok.
    I chat, and make phone calls to customer support but no luck. I contact my bank and everything is ok.
    For security reasons the last card was cancelled and I update the card infos, the card that I have today, and in the last 3 months adobe receive the payment.
    I don't know what to do, the licensing days are ending.

    Hello PRSantos,
    I checked your account and I have seen an issue regarding the payment.
    The credit card issuer is blocking the payment and therefore it can't be done.
    I would suggest you to please, verify with your bank and card issuer and assure you everything is unblocked on their end.
    Please specify them the Electronic Banking System/Service might be blocking the payment, that Service is part of every banks.
    Please let us know when you will have more information.
    Thanks.
    Arnaud.

  • Credit mgt n Credit exposure

    A) While doing credit mgt, for some customers total Outstanding which is there in FBL5n is not matching with credit exposure which is there in FD32.
    Please let me know How the system is updating the credit exposure.
    Highly rewarded.
    Reg,
    Madhu

    Hi Madhu,
    System updates the credit exposure as the total value of the Receivables (Outstanding amt to be paid by customer in FBL5N report) + Sales Value( Total of all order values which have not been transferred to FI, but which are taken into consideration when checking the credit limit.)
    Credit Exposure= Receivables+Sales Value
    The receivables value and Sales Value are updated correctly in FD32 Status Tab.
    Hope this addresses your question, kindly award points if so.
    Thanks,
    Vinu

  • Credit mgt problem

    Hi,
    I have an issue like
    Customer have 10000 rupees credit and 30 days time,when credit limit exceed in sales order it should not to trigger Materila requirements in Production
    Solution pls
    URGENT
    Rgds
    snfico

    Hi !!
    You can proceed as follows:-
    IMG> Sales & Distribution> Basic Functions>Availability Check and Transfer of Requirements>Transfer of Requirements>Maintain Requirements For Transfer Of Requirements, here maintain enteries as follows:-
    RNo. '101' & SyRoutine '1'
    This will sort your issue.
    Do give your feedback.
    Regards,
    PATHIK
    Do give your feedback
    Message was edited by:
            Pathik Pandya

  • Credit check issue in third party order

    Dear all,
    We are facing some issues related to credit management data for one of our customer. I need your valuable inputs for below mentioned queries-
    1. As a genaral question- When we releases a SO through VKM* How the system calculated the " Released Credit Value of the document".
    2- For one of the customers, the FD33 shows a Sales value X USD. As i see the split of this sales value , this X USD amounts to OPEN DELIVERIES. Both Open So and Open billing are zero. We tried to check with no. of tcodes to find out the open values but no such Open delv document is appeared.
    In VC/2, it only shows Open SO, no open deliveries are there.
    So i tried with simulation program RVKRED88, and found 5 third party Sales documents , against which some value is coming under the Open delivery value and it sums up to the value as coming in FD33.
    I have a few questions on this-
    > All the SO in output are Third party SO, against which PO has been created, ( Third party So> PR> PO> MIRO--> billing) and all are in status OPEN, so how come they are showing value in OPEN DELIVERY ?
    --> The value appearing against these third party SO is Not equal to items value/net value, it is a complete different value than appearing in SO. But in SO changes history , the same value is coming AS RELEASED CREDIT VALUE. How is it being calculated?
    For eg- for one of the Third party SO , the value coming in RVKRED88 is 29573.53 USD,
                                                                net value in So= 24,120.00 USD, Qty = 6000 PC , Credit price= 4.02 USD
                                                                Credit value of So in VBAk= 29573.53 USD
                                                               SO created , released on 08.July.2011, confirmed schedule line =08.Oct.2011
    Credit settings- Static check + Credit active Item cat and SO ,  Open So and open delv are ticked in credit settings.
    Kindly help in the analysis.
    many thanks in advance for the inputs.

    Hi Dharmendra,
    1.  When we release a sales order using VKM* transaction S066 information structure and OEIKW field is updated which increases open order value.
    2. If there is mismatch in the values of credit related fields run RVKRED77 (Re-organisation of credit in case of update errors) this will update all the credit data for a Payer customer in real time. RVKRED88 is simulation mode.
    3. Updating of values related to credit is controlled by the update group assigned to credit control area. If system is not able to update  using the assigned update group it will automatically try updating using the next update group. Below is the text of SAP Help.
    If a document cannot be processed with the update group you specify, the system determines the next possible update it can carry out. For example, you select Update group 000012 which, at delivery, reduces the open order value and increases the open delivery value. Assume that one item in the order is not relevant for delivery. In this case, the system automatically determines Update group 000018 for this item. Update group 000018 increases the open delivery value for the order item. The system uses the confirmed quantity of delivery-relevant schedule lines to update the order value
    As you know in OVA8 transaction credit control area, Risk category, credit group and currency are assigned to update group.

  • Credit Mgt - VKM4 not Updating sales orders

    Hi all,
    We have issue in credit management, we are using Dynamic Credit Management at sales order Level, once sales order is block for over credit we will release through VKM3 or VKM4 ,
    But Problem system is behaving differently with some credit account for example
    We created sales  order and it got block for credit and its got release through VKM3, but when are reviewing that order in VKM4
    using Overall credit status as D , this problem is happing for only few credit account but also not frequently, i mean to say some time its updating VKM4 after release.
    Can any one guide me what could be a issue
    Regards
    Nishad

    SAP Note 396791
    SAP Note 394392
    SAP Note 381685
    SAP Note 396338
    SAP Note 18613
    SAP Note 124571
    SAP Note 716141
    SAP Note 377165
    Please check these notes
    Hope this helps
    Regards
    Sai

  • BEx Report Display - Transformation Rule Issue - Urgent

    I have 2 fields one Key Figure : "Amount (Datatype-CURR / length-13)" and one Characteristics : "Indicator (Datatype-CHAR / length-1)" in the source system.
    I need to display the Amount field with +/- depending on the Indicator field which has only 2 values S(Credit) and H(Debit) in the BEx Report.
    How can I handle this issue. Please provide your suggestions.
    Thanks,
    Shekar

    Create 2  Key Figures.
    One restricted with S(Credit) and another restricted with H(Debit).
    Create another canculated Key Figure and multiply with -1 for the u want to do.
    Then add the 2 filed if you want to and display and keep the others in No Display.
    Regards, Siva

Maybe you are looking for