CRM Marketing product listing interface

HI All,
We have a requirment to propose products for customer by default, for that we have created a condition type in Marketing product listing. Some custom table /CN/*CUS90003 is created while creating the conition type.
Now our requirment is to perform some initial loads for product listing, are there any fucntional modules or classes to do initial loads?? we need to upload data from an xls sheet to SAP.
Thanks in Advance
Suman
Edited by: Suman Gandhe on Nov 15, 2010 9:04 AM

There are two functional modules 'CRM_PRP_MAINTAIN' and 'BAPI_PPR_MAINTAIN_40'. we have implemented 'CRM_PRP_MAINTAIN' but BAPI can also be used in this case.
-Suman Gandhe

Similar Messages

How to add new fields to CRM contract Product List tab?

Hi all!
I would like to add a new custom field for CRM contract (CRMD_BUS2000121) item level, on the Product List tab.
Here I found CRMT_0100A_ORDPRP_I_EXT_UI structure, therefore I enhanced this with new append structure and new fields.
I also added the new fields to ORDPRP_I append structure and mapped the new fields in CRMC_MAP.
For some reason the new fields are on the screen but they are grey, not changeable. What did I do wrong?
Thanks,
Tamas Pentek

Actually for the new IC webclient UI you have need to take a look at your options:
1. New Installation:
Use the EEWB and add the fields. As part of the EEWB work, you will have a couple of post-processing steps where you will add your generated fields to the new screens. However this doesn't require any programming.
2. Upgrade from CRM 4.0/50
- New fields to add as part of upgrade
See the directions for new installation
- Existing fields to add as part of upgrade
--See the blog on the 40/52 CUSTOMER_H migration for transaction fields
--Business Partner fields part of BUT000 available via UI configuration tool, no extra work needed
--Business Partner fields part of tabular extension, manual work required, I am still "perfecting" this method and plan on writing a blog once I have the technique finished.
--Product Attributes - use the transaction CRMM_UI_PROD_GEN and CRMM_UIU_PROD_CONFIG
I know CRM 2007 is based on the same tech foundation as 2006s, with some differences in how the UI tool works and the fact there are some screen layout changes(editable overviews). The extension procedures are generally the same. I can answer some of you extension questions based on my work with CRM 52 so far. It will generally apply to your situation.
BTW: The PCUI is no longer supported in CRM 2006s and above. Even the old SAP GUI transactions such as BP, COMM_PRODUCT are removed from the standard CRM menu. The SAP CRM web client should be used instead now.
Take care,
Stephen

Enhanced Layout in CRM Marketing Planer

Hi,
we have a planing layout based an ALV-Grid in the CRM-Marketing-Planer (Campaign-Planing). Now we would migrate from ALV-Grid to Enhanced Layout because ALV-Grid will not more supported with CRM 5.0.
Could anybody told me which Customizing Steps must be run through or which ar the necessary adjustments? Is there any detail documentation?
I hope anybody could help me.
Dirk

Dear Mikkel,
Please don't post the same question in different forums. Refer to the [rules of engagement|https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement].
A reply has been provided in the following thread within the CRM Marketing Forum:
Success Key Figure planning
Anik Roy
CRM Marketing - Product Manager
SAP Moderator

Update CRM marketing attributes in Product

Hi All,
We have a requirement where in we want to update CRM Marketing attibutes for a given Product.
This has to be done from SAP EP. An interactive form is launched from UWL and this would allow
user to proivde the marketing attribute data. The data is then to be sent for approval via R/3 workflow.
Now I want this data (after approval) to be updated in the product master data in CRM.
Do we have any standard APIs for this ?
Thanks & Regards,
Debabrata Mohanty

Hi Prabaharan,
I have a same requirement to update the existing value of a marketing attribute. I created a new implementation of BADI "BUPA_GENERAL_UPDATE"
I am using the FM 'CRM_MKTBP_UPDATE_ATTR_BP' to update the value, but the updation fails,,,,
MY requirement is to override the default value for a particular BP_KIND to some other value at the time of creation of BP.
please reply as I am having an urgent delivery of the requirement.
Regards,
Ashraf

SAP CRM to MS Access Interface

I have a CRM to MS Access Interface that I have to set up. Has anyone set that up before and if so;
How was it done?
Any documentation on that?

Dear Abdul!
There are probably many ways to achieve what you´re looking for. It heavily depends on several factors, which solution turns out to be the best for you. You should take into account security, data integrity and sensitivty, business context and system architecture, among others.
First of all though, you should specify wheter you want to access the SAP table for unidirectional read access only, or if you have the requirement to also update data in any SAP table (are you talking about a SAP standard table or a customer Z-table?)
If you´re looking for a straight forward solution for read-only access, you can create a custom Z* RFC-enabled function module that reads out your SAP table and returns the values to your calling application. You could also use the WebServices interfaces of your SAP WebApplicationServer, depending on your release level. Furthermore, kindly check, if there are standard BAPI´s available that contain the data you need in their return parameters.
Of course, you also could directly interface on a DBMS level between MS access and your underlying SAP DB, but most likely such a solution will never be supported in any productive environment, and for good reason. So you should look into one of the other options mentioned.
I´ll gladly provide more detail about any of the mentioned approaches, but would like to have a little more input about your requirements before, so the optimal solutions can be found.
Kind regards
Christoph

Crm 2007 - product by partner sales organization

hello
I'm trying to customize the following procedure:
1.Create opportunity or quotation,
2. enter a business partner (prospect/sold to)
Get the relevant product list to the specific partner (determind by the partner sales organization)
I read that the PPR procedure should be the answer, i tried it
and no luck.
can you please give an answer or a direction?
Thanks
Rika

hi jay..
If u got any solution for the same please provide us, it would be great help.as we are also facing the same problem.
and also give me step by step procedure to transfer the variant product from ecc to crm 2007.
any links any usefull material for variant product in crm 2007 will be highly appreciated.

CRM Marketing Event Campaigns

Dear friends,
How can i carry out events in any campaign about promoting a product for example as i want to have an invitation list to include the business partners that i will send invitations to them but after the event i want to record who attend the event and who not to record the revenue that came from this business partners as they send me customers after the event.
Best regards,
Mohamed
Edited by: mohamed_egypt on Dec 10, 2011 12:03 PM

Hi Mohamed,
-> Create a Marketing survey having a questionaire
-> Create a Mail form which contains Data to be send to customers.
-> Create a Target group(TG) based on required Business Partner's to be contacted.
-> Next use a Campaign automation scenario , where in Campaign element is attached with created Mail form , Survey and TG.
-> Use corresponding Campaign automation workflows.
-> Start automation process.
Finally once the Automation process is completed (after certain period) check the count and Contact statistics accoridngly in each step.
Also use reports in WEBUI.
Campaign Effectiveness
Campaign Effectiveness
Campaign Response over Time
Marketing Contact List
Marketing Contact Summary
Campaign Revenue over Time
Campaign Revenue and Costs
Hope this helps.
Regards,
Anup

Smartforms related to CRM Marketing

HI.
Please provide me smartform names which are in CRM Marketing Module.
Regards.
Partha.

Hello Partha,
Here are the default smart forms available to Marketing:
CRM_MKTPL_DEFAULT_TRADE --> for TPM
CRM_MKTPL_DEFAULT_PLAN --> for Marketing Plan
CRM_MKTPL_DEFAULT_CONSUMER --> for Campaign
CRM_MKTPL_DEFAULT_DEAL --> for Deal
CRM_MKTPL_DEFAULT_MDFINI --> MDF initiative
CRM_MKTPL_DEFAULT_MDFPROG --> MDF Program.
CRM_MKTPL_INVITATION --> Form for marketing Planning.
But you build your custom forms and assign them to any of the above object types. You can get the complete list by CRM--> marketing --> marketing planning & campaign management --> print preview
--> Assign forms to marketing.
Hope this Helps.
Best Regards
Raja Pamireddy
Moderator

Bounces in Marketing Contact List??

Hi Experts,
In SAP Library I found the information that bounces should be reflected in Marketing Contact List. But I do not see where I am suposted to see the bounces. Indeed, I am sending a marketing campaign (emailing) in TEST system. One of the bps in the target group has a wrong email adress. This causes an automatic reply "delivery failure". But in the Marketing contact list the bp appears as successfully contacted.
The mail form was created with ERMS option.
Where am I supposed to see the bounce in the report? I suppose the "number of successfull mails" - entry is missing.
In our test system the bp with the wrong email adress has this entry.
Can anybody confirm this?
What might be missing in our system?
Best regards,
Christina

Hi Easwar,
Thanks for your reply.
In trx. SOST the mail with the wrong adress (XX@XX) apears as send item.
Best regards,
Cristina

Why do I see products I don't own in the My Products List?

I logged into my Apple account and was in the process of verifying the list of products I own when I noticed that there are 3 iPhone 4S serial numbers on the list. I've only owned 1 iPhone 4S and the other two aren't mine. I've never bought other iPhone 4S phones other than the one I previously owned which I've since sold.
So I have two questions:
1 - Since I sold one of the phones, I didn't know there was a My Products List which had the S/N of the phone I sold. I sold this phone well over a year ago and the woman who bought the phone in another state, has been using it without problems. I know since she emailed me to confirm that she had no problems with the activation. So if she's the owner, is it best to leave this phone on My Products List or should I remove it?
2 - Regarding the other two phones I've never owned, how did these get onto My Products List? And, if they're registered to me on this site, what does that mean?
Thanks in advance. This is really concerning.

1. No device gets removed unless you remove it. So, since you sold the phone and the person has no problem using it, remove it.
2. No idea why there would be anything listed you do not own. I'd simply remove the items, but if it concerns you, I'd suggest stopping by your nearest Genius Bar and show them the items listed and ask them if someone can figure out how they got there.

How can i request just the navigation or just the product list when i query the dgraph?

Is there a way to make a request for navigation only or record list only?

That's actually the only way to query using the conversation service in Oracle Endeca Information Discovery.
In your request, you specify a State (i.e. what is the Navigation State) and a series of configuration elements indicating "what you care about" coming back.
If this is related to the older dgraph stack that is embedded into the Commerce Product (guessing since you mention a "product list"), you should ask the question over yonder:
Technical Questions
Regards,
Patrick Rafferty
Branchbird

How to use SAP RDE CRM Users products

Dear Experts
Am facing a issue when use SAP RDE CRM Users product as belows:
At this time, my customer running with ERP ERP 6.0 EHP4 in three
landscapce (server DEV, server TEST and server PROD)
And now, my customer want to use SAP RDE CRM Users product and they
bought SAP RDE CRM Users product & License from SAP
I have several question as follows:
Conditions necessary and sufficient to be able to install and run SAP
RDE CRM Users product ?
With a three landscape of my customer at this time -> Need more
hardware for the installation of SAP RDE CRM Users ?
SAP RDE CRM Users product is a Integration of ERP ?
SAP RDE CRM Users product can be installed as a component of ERP
system ? or SAP RDE CRM Users product is a standalone system ?
If a component of ERP -> how to install and use it
If a standalone system -> how to install and use it
Please guide me to know this issue
Thanks and best regards

Hi,
Can you give me information about crm rde if you got them??
Thanks in advance,
Frank

Populating CRM marketing attributes using the APD

Hi Experts
We are having problems with populating CRM marketing attributes using the APD. When we run our process we get the error message:
CRMBW_ATTR_WRITE005: Error when processing function module CRMBW_UPDATE_BPMKT_5. Message no. RSAN_MDL024
As you can see, we are using the new function module CRMBW_UPDATE_BPMKT_5 since the old CRMBW_UPDATE_BPMKT did not work either.
Do we have to add a reference to a infoobject in transaction CRMBWTARGETS? We have not done this because the marketing attribute in CRM doesnt have decimals and all the objects in BI have. Could this be the cause of the error?
Kind regards
Erik

Hi Ramesh,
Thanks for quick reply.
I have already followed the procedure you have described. Since there is not common objects between ODS and Bpatner infoobject, i am not able to do mapping.
for eg. my ZBPARTNER infoobject has attributes like zfooty, ztennis and zrugby but my ODS has char name , char value, counter for multiple values infoobjects.
I am following the example in the demo content to work out the process but could not understand how the data is getting uploaded from ODS to Business partner.
http://help.sap.com/saphelp_nw70/helpdata/en/bf/5df63bf9deaf09e10000000a114084/frameset.htm
Thanks,
Sandeep Jogde

Hello! I had Photoshop Elements (and some other products) installed on my Laptob, but lost them because of a system breakdown. Trying to install these programms again, I logged in to my account "my adobe" and immediately found my products listed there plu

Hello! I had Photoshop Elements (and some other products) installed on my Laptob, but lost them because of a system breakdown. Trying to install these programms again, I logged in to my account "my adobe" and immediately found my products listed there plus a link "download here". But clicking the link didn´t start anything. Nothing happened. How can I get my prgramms installed again?

Try using a different browser if the link did not work.
You can also try downloading thru the following page if you can find the version(s) you need...
Download and Installation Help -
https://helpx.adobe.com/download-install.html

Dynamic category list link to product list page not working

I have a dynamic catagory list that is populated from a mySQL db
<?php do { ?>
<li><a href="product-list.php?CatID=<?php echo $row_Recordset1['CatID']; ?>"><?php echo $row_Recordset1['CatName']; ?></a></li>
<?php } while ($row_Recordset1 = mysql_fetch_assoc($Recordset1)); ?>
im not sure if the aboive is correct?
i need to link it to the product page and just dispaly all the products in that catagory
the product-list php code is
$var1_Recordset1 = "-1";
if (isset($_GET['CatID'])) {
$var1_Recordset1 = $_GET['CatID'];
mysql_select_db($database_lotties, $lotties);
$query_Recordset1 = sprintf("SELECT * FROM lottieProducts, lottieCat WHERE lottieCat.CatID = lottieProducts.CatID AND lottieCat.CatID = %s", GetSQLValueString($var1_Recordset1, "int"));
$Recordset1 = mysql_query($query_Recordset1, $lotties) or die(mysql_error());
$row_Recordset1 = mysql_fetch_assoc($Recordset1);
$totalRows_Recordset1 = mysql_num_rows($Recordset1);
thanks in advance

done it
$varCat_rsProductData = "0";
if (isset($_GET["cat"])) {
$varCat_rsProductData = $_GET["cat"];
mysql_select_db($database_lotties, $lotties);
$query_rsProductData = sprintf("SELECT * FROM lottieProducts WHERE lottieProducts.CatID = %s", GetSQLValueString($varCat_rsProductData, "int"));
$rsProductData = mysql_query($query_rsProductData, $lotties) or die(mysql_error());
$row_rsProductData = mysql_fetch_assoc($rsProductData);
$totalRows_rsProductData = mysql_num_rows($rsProductData);
link from cat list
<a href="product-list.php?cat=<?php echo $row_Recordset1['CatID']; ?>"><?php echo $row_Recordset1['CatName']; ?></a>

CRM Marketing product listing interface

Similar Messages

Maybe you are looking for