CRM - Structure
Hi,
Trying to learn CRM - and to start with i have gone through the help.sap.com website to understand the Setting up the Organization structure....
I have refered the information available from the below link:
http://help.sap.com/saphelp_crm50/helpdata/en/68/5c1738453fde16e10000009b38f8cf/frameset.htm
http://help.sap.com/saphelp_crm50/helpdata/en/68/5c1738453fde16e10000009b38f8cf/frameset.htm
Now, still im not very clear about the organizational structure as compared to the enterprise srtucure setup in R/3 SD.
When i get in to the PPOMA_CRM Tcode and see there is User/Org Unit etc....
Now after i select an user and see that there is org units assigned to it and when i get in to the org units then there are 4 tabs at the bottom and in that we have FUNCTION tab and in that Assigned and Local sections are there .... What do they mean.....
Can any give help me in understanding the Setup of Org Structure in SAP CRM by giving any exapmles / documents or any links....
Please HELP !!!
Regards
Hi Robert,
Thanks for the link....
I have gone through the document and still have clarifications....
When i get in to the PPOMA_CRM Tcode and see there is User/Org Unit etc....
Now after i select an user and see that there is org units assigned to it and when i get in to the org units then there are 4 tabs at the bottom and in that we have FUNCTION tab and in that Assigned and Local sections are there .... What do they mean.....
I underatand in CRM we can have Sub Sales Organizations under the main sales organization..... Now the same is not possible in R/3 SD ... How we can map the sub sales organizations that are in CRM with R/3 - SD
Please help
Regards
Edited by: SAP2020 on Jun 8, 2010 12:03 PM
Similar Messages
-
CRM Structure name of BI InfoObject 0UPLI_QTYS is required
Hi,
CRM Structure name of BI InfoObject 0UPLI_QTYS is required.
In TPM scenario, planning intergrated with BPS is not working. when we enter the Uplift Quntity in layout
it is not getting stored in the BI system.
Please suggest ideas.
Regards
PankajHi Derya,
thanks for your answer. I have performed the steps you are writing about again. During activation of the data sources in SAP ERP there are two warnings saying that the datasource is based on a view and not custapp will be possible. However, the error while activating the infoobject with "data flow before" remains. Do you have any clue how the attribute 0GLACCEXT of InfoObject 0GL_ACCOUNT is gonna be populated?
Best regards
Martin -
SAP CRM Structure for SearchHelpResult View of PRD01QR (Products)
Hi All,
I am unable to trace the underlying SAP structure name for SearchResult Node in GENIL_MODEL_BROWSER.
I need the name of the structure, as i need to modify my Result View by adding another field to it for output display.
Any input on this would be highly appreciated.
Thanks
DedeepyaThanks Shobit
Solved!
Though a BIT more of navigation is involved sometimes esp. incase of dynamic queries..
Phew stil a long way to go in learnin...
Thanks
Dedeepya -
How to add new fields in CRMD_CUSTOMER_H in CRM 3.0 ?
Hi,
I I have a requirement in CRM 3.0 to add a new field to crm structure CUSTOMER_H but not sure how to do this. I know in 7.0 we have transaction EEWB to do this but in 3.0 i have no clue. Please help how to do this. Thanks in advance!
Regards,
BhanuMoved this over to CRM General & Framework.
Firstoff technically SAP CRM 3.0 is not even supported in general maintenance by SAP. However for memory lane, extensions in CRM 3.0 must be coded manually. EEWB did not exist until CRM 4.0. In general there should be a CI include in CRMD_CUSTOMER_H where you would put your fields. The drawback is that you need to extend the BDOC structures and write the exits to populate/receive the fields on the inbound outbound bdocs manually along with the transfer to BW.
BTW since it is CRM 3.0 you probably have bigger problems than this, but that's just my opinion.
Wow this makes things feel like 2002/2003 all over again for me.
Take care,
Stephen -
Issues with Organizational Model in CRM
Hi guys,
We are implementing CRM 5.0 and I generated Organizational Model in system using Report: CRM_ORGMAN_R3_ORGDATA_GENERATE. This report generated organizational model with no errors. But there is a issue with org model:
In our R/3 system same sales office are assigned to multiple sales area and same salesgroups are assigned to multiple sales office due to this in CRM when the org model generated it only assigned the sales office and sales group to sales org 1000 however sales org 2000 and 3000 left unassigned.
eg:
R/3:
Sales office assigned to
sales area: 1000 10 10
001
002
003
2000 10 10
001
002
003
And after generation in CRM:
Sales org: 1000
sales office: 001
002
003
Sales org: 2000
no sales office or sales org assigned.
When I am trying to create it manually then it gives me an error: "attribute_R/3_SA_ORG with value xyx already assigned".
Did anybody faced similar issue?
I even ran the report for to change the org model to enhanced version but it didnt helped.
Please give your suggestions.
Thanks
AnkitHi Ankit,
Its common that the sales office are only assigned to the first sales organiz unit in
CRM structure in PPOMA_CRM. The same for the sales groups that are only assigned under the first sales office unit in CRM structure in PPOMA_CRM.
No mather, the important thing is that under Function tab > Sales office tab, for a sales office, the system has all the possible combinations for R/3 sales org, R/3distribution channel and R/3 division.
And the same under Function tab > Sales group tab, for a sales group, that must contain the possible combinations for R/3 sales org, R/3 sales office, R/3distribution channel and R/3 division.
In this way, you have the structure like:
SALESORG1001
SALESOFFICE 1100
SALESGROUP 100
SALESOFFICE 1200
SALESOFFICE 1300
SALESORG1002
SALESORG1003
But inside SALESOFFICE 1100 details you have something like:
Sales office tab:
R3 sales org | R3 DC | R3 Div
1001 10 01
1002 10 01
1003 10 01
And under Sales Group 100 you have something like:
Sales group tab:
R3 sales org | R3 Sales Office | R3 DC | R3 Div
1001 1100 10 01
1002 1100 10 01
1003 1100 10 01
1001 1200 10 01
1002 1200 10 01
1003 1200 10 01
1001 1300 10 01
1002 1300 10 01
1003 1300 10 01
Hope it helps,
Susana Messias -
BADI CRM_LAE_UPL_ADJUST.
Hi Gurus,
I am working on Badi crm_lae_upl_adjust .
By EEWB tool we are adding new tab with 2 fields , where this new 2 fields to move to lease structure LAE_CRM_ITEMS table in r/3.
For this i found the above BADI where i enhanced and appended the above fields in both the structures in crm as well as in R/3.
When ever a new lease contract was created and saved in CRM the above BADI was trigerred . And when an contract inception button was triggered the contract was incepted sucessfully .But it was not flowing to R/3 by FILAEXPL T.code . when that particular contract number was given. getting status message OBJECT 50000321 DOES NOT EXISTS IN COMPANY CODE 0107. Is this was approach to send the fields or any alternative one .
could any body have the sample code or necessary documents regarding this.
necessary inputs reward points.
Thanks in Advance.Hi,
Yes,You can use this Badi .
In CRM 1O transaction,the EEWB created fields// Product master fields,etc can be mapped to LAE item by appending the fields in the following structures in the CRM, ERP systems.
CRM :
STRUCTURE : CRMT_LAE_UPLOAD_ITEMS
You may append the structure with field1,field2,field3 ,if you have only upto 3 fields to be passed to ERP .
Another reason is the ,mapping structure in the ERP system,
LAE_CRM_ITEMS already have these fields (field1,field2,field3 )
ERP
1. Table : LAE_CRM_ITEMS
2. Structure : FILAGF_CONTRACT_ITEM
this structure should be appended with field1,field2,field3,etc
You can write your logic inside the BADI Implementation.
If more fields are required,you may append the fields in the above structures in CRM ,ERP.
Please let me know if you need any more details / Sample Code for this BADI implementation.
Mandatory : FIELD NAME,DATA TYPE & LENGTH SHOULD BE SAME in Both the SYSTEM Stuructures ; otherwise U Will get a Dump in ERP.
Thanks,
Karthik
Edited by: karthikeya seenivasan on Jun 20, 2008 4:54 PM -
How to put Breakpoint in Middleware-
Hi Experts,
Could you please let me know the procedure to debugg the Middleware.
Lets have the scenario : Create a sales order document while saving the Document the middleware will get trigger. Kindly help me out to retriving the information that which Bdoc is calling while saving the document. Further my requirement is to parse one more field to the R/3 system so how to identify that which function module needs to enhance to inturn enhance the middleware.
Waiting for the reply. Helpful answer will reward with points,
Thanks,
Sunilhi,
How does the reply to CRM work with a delivery / rush order / billing document?
a) Delivery:
Before saving the delivery, switch on the debugger by entering /h.
Then set a breakpoint in subroutine SAPMV50A / SD_MOB_CLIENT_UPDATE. Set variable V50AGL-SYNCHRON to 'X'. (FORM routine SD_MOB_CLIENT_UPDATE
is contained in Include FV50XF0B_BELEG_SICHERN.) Then debug module SD_CRM_ORDERDATA_FROM_DLV_INV. The statuses are determined here. The
remaining process is as described for the delta download (Question 4).
b) Rush order:
The rush order is a special case in which module SD_CRM_RUSHORDER_DATA_READ is called in routine MV45AF0B_BAPIDATEN_ERMITTELN directly from
the sales order. The remaining process is also as described for the delta download (Question 4).
c) Billing document:
Before saving the billing document, switch on the debugger by entering /h. Then set a breakpoint in subroutine SAPLV60A / CRM_UPDATE. Set
variable LV_SYNCHRON to 'X' here. (FORM routine CRM_UPDATE" is contained in Include LV60AD26.) Afterwards, also debug module
SD_CRM_ORDERDATA_FROM_DLV_INV. For the remaining process, see the delta download (Question 4).
d) Cumulative quantities and document flow:
In CRM, structure CUMULATED_I is interesting both for the delivery and for the billing document because the quantities are updated here,
in addition the document flow is updated in table DOC_FLOW.
Regards
Srinu -
Hi experts,
I am new to SRM Just started looking Help document. I have a basic doubt in SRM.Actually in help they said.
mySAP SRM is based on the following components:
SAP Bidding Engine
SAP Business Information Warehouse
SAP Enterprise Buyer
SAP Exchange Infrastructure
Supplier Self-Services
SAP Catalog Content Management
SAP Enterprise Portal
I want to know does SRM server is called as SAP Enterprise Buyer or does it have a seperate server for SRM and it further interact with SAP Enterprise Buyer?
RajeshHi
SAP Enterprise Buyer is the e-Procurement component of SRM suite. It is the mandatory central component. Remaining components can be activated or installed depending upon the requirements.
According to terminology, till SRM 3.0 version, it is tied to CRM suite. In this version central component (SAP enterprise buyer) is called as BBPCRM4.0(Logical name given to the EBP central component. You can check this in Tx SAINT)
From SRM4.0, SRM has its own relevant middleware structure (still same as CRM middleware). So once you have SRM4.0, you wont see any CRM structure in SPRO. SAP Enterprse buyer is termed as SRM Server 5.0 (logical name) for this.
lly, for SRM5.0 suite, SAP enterprise buyer is SRM server 5.5.
Rgds
Reddy -
Moving Solution Manager content across platforms
I have a pretty good understanding of Solution Manager's capabilities but need to make a decision about the platform to install it on for our project.
We want to get something up and running quickly so we can learn from it, but this probably wont be the final platform that we use for our implementation and production running.
How difficult is it to take Solution Manager content from an installed server and move it to another one? Can this be done? Will it result in much "downtime" for our project?
What if the final platform is totally different from the initial one - say from SQL Server/Windows to Oracle/AIX - will we still be able to move developed content from old to new?> What if the final platform is totally different from the initial one - say from SQL Server/Windows to Oracle/AIX - will we still be able to move developed content from old to new?
You can do system copies - but the "content" (means solutions, EWAs) are not that easy to transfer since they depend on the CRM structure (Businesspartners, roles of them etc.)
We are in the same situation of having an upgraded SolMan (initally started with 2.1 over 3.1/3.2 to 4.0 with Unicode conversion) with > 7.000 support desk messages which we don't want to loose. Our research to move those messages to a freshly installed SolMan turned out to be too complicated and needing too much time - thus we decided to freeze the current SolMan at some point soon and install a new one and start the implementation from scratch.
It may be possible to export/import certain configurations/settings but as far as I know there is no standard procedure for this.
Markus -
Is anyone aware of a SAP standard extractor that will pull Sales BOM data?
Hi john,
Check
Extractors 0CO_PC_PCP_01 and 0CO_PC_PCP_03
deliver BOM information for sales-orders.
also check this thread
Extracting R/3 Sales BOMs and CRM structured products
BOM Material Master Data in BW
Please search forum for more info, this topic has been discussed a lot of times.
Thanks
CK
Message was edited by:
Chitrarth Kastwar -
MiddleWare : Connection Object Replication
Hi Gurus,
I am sending Custom field of Tech Obj from CRM to ISU. I have already Update the CRM Structure as well as of ISU Structure ie BAPI_EHAUADR. My data is replicating through MiddleWare without any Error.
But Except my Custom field, all the data is updating in ISU.
Just want to confirm where should i need to fill Structure in ISU so that my field in BAPI_EHAUADR will get update.
Also want to confirm While sending Connection Object what would be the recieving Functional Module in ISU side.
Thanks in advance.
Harkesh DangHello Friend!
I have the same problem with vs2008!
Do you have the solution for this problem?
Thanks -
CRM Communication structure not working in a copy client
Hi all,
my issue is the following. In client 300 CRM, defined as copy of client 100 communication structure CRMT_ACS_I_COM is not filled by implementation of BADI CRM_COND_COM_BADI .
Basically it is supposed that once you fill manually a field contained in a Z TAB, at item level, by marking the tax type, condition type in pricing procedure is filled automatically.
Now the point is, that in my client 100 of CRM this process works perfectly. Clients 100 and 300 are in the same machine.
Since customizing tables are the same, BADis used are the same (the code), what is falling?
Many thks in advance,
AndreA,
Ps: contributions will be rewardedHi Johannes,
I know it not recommended to set up two clients in the same machine, but unfortunately I did not have choice at time as it was imposed.
As well it true they share the same instance.
In any case I would say that in Quality we have the same clients and we haven't got any problems.
But one is kept just for getting historical data, meant CRM100, meanwhile CRM300 is the real production.
Both have an active middleware connection but just 300 is receiving and giving data to ERP, meanwhile R/3 as well is just kept for checking.
So I think the issue is elsewhere, otherwise quality system would fail as well.
In any case many tks in advance,
AndreA -
CRM org structure from mapping to r/3
Hello frineds....
as i m new 2 CRM I just want to know how to
<b>Create Organizational structure in CRM with direct mapping to SAP R/3</b>
Thanx in advanceHi, Selvam
You can maintain theirs in the org. data in the same sales office S001.
Also don't forget for tupel.
Tcode ppoma_crm -
Organization structure in CRM 7.0 from ECC and HR
Hi,
We are trying to download Org structures from ECC and HR. (CRM 7.0, HR & R/3 ECC 6.0)
From HR
The ALE distribution is set across the systems CRM and HR and I did the PFAL run as per the best practices BB C05. There are about 100,000 Idocs inbound to CRM system and out of which about 15K are in 51 status and the rest are in 53 status.
Observations:
The Organization structure from HR is not totally mapped in CRM but only a part of it is displayed in PPOMA_CRM.
The remaining Org units are found in 'non-related objects' selection.
All the Idocs in failure are in error "Error in subroutine read_namtb for structure of infotype ". When I go to the long text
Message no. 5-109
Diagnosis
An error has occurred in subroutine read_namtb for structure of infotype .
Procedure
Check the entry for infotype in table T777D (structure, IDoc segment, expanded structure) and the corresponding structures.
I am not sure which infotype needs to be checked in T777D.
From ECC
The CRM - ECC connectivity is set. Downloaded all the required customizing objects successfully. Switched the org model to "enhanced backend integration version " and then followed on to SPRO->CRM->Master Data->Organizational Management->Data transfer->Copy SAP ECC structure and selected all the available R/3 Organization assignments available and then selected the "generate selected lines".
Observations:
All the generated org units are in GREEN in SPRO but there are no assignments found in PPOMA_CRM not even in the unrelated objects
Checked tables HRP1000 and HRP1001 from the CRM Sales org unit IDs (ex: O 5000012) created here and they are not found but the generation is in GREEN.
I will appreciate any assistance I get here.
<< Moderator message - Everyone's problem is important >>
Regards,
DT
Edited by: Rob Burbank on Oct 20, 2010 4:25 PMHello DT,
Could you please let me know the process how the problem is solved..
even we are having the same issue like, we have downloaded the Org Model form HR to CRM system, till here it was fine.
when we are trying to download the ECC sales structure(CRMC_R3_ORG_GENERATE) to CRM system, i have selected all the items and triggered the Gerenerated Selectd Lines, but after all the items are generating in a error with RED.
Could you please share you knowledge, so that it will help me in figuring out the issue.
Thanks in Advance DT. Hope you reply back.
Regards,
Ven -
How to change field labels in CRM without changing original data structure
Hello, I wish I could change the label of the input-type fields that are visibile in the CRM Account search page.
The only way I have found so far is: go to the structure CRMT_BSP_SEAREQ_ACCOUNT
and change the short description of the component.
This is, anyway, very invasive, as I have to modify a SAP structure and I am asked an activation key.
I have gone through the PCUI but cannot find a way to change the labels, anybody has a hint?
At least, I would like to give the labels the same length so that the page is better organized, now all columns have different widths...Sorry, I had not seen this previous answer
https://forums.sdn.sap.com/click.jspa?searchID=9822963&messageID=4781696
Very nice!!!
Maybe you are looking for
-
i would like to understand the relationship between scratch disks and RAM usage in Photoshop. While i was working on a fairly big psb file (2gb), photoshop kept prompting that I was out of memory, but in fact the utilization was only 75% (i had 16gbs
-
Absence Deduction is calculated wrong for one employee
Hi, We have an employee who changed his absence booking for the year and all of sudden his absence deduction is not calculating properly. His total absence quota was 20 days. He initially booked all 20 days and then cancelled them and created a ne
-
FMCN - Open Item upload Commitment not updated in case of Service Entry
Hi All, I am trying to use FMCN to update commitment and fund centers in open PO's and GR's, however where there is material PO's it updating perfectly but if there is Service PO then it is not updating in GR/IR account with non budgeted commitment I
-
Since I starting using my MacMini (2011 version) I have not been able to print double sided from my HP Photosmart plus - there is no option for this in the Printer dialog box as there was in the similar dialog box on my PC. How do I set up this optio
-
I have the iPod Photo and the newest version of iTunes and iLife 05'. I have more Photos in iPhoto than i have music in iTunes so transfering Photos to my iPod Photo is nothing new. But for some reason I imported a new batch of photos in to iPhoto as