Cross checking values from two different arrays

Hi there,
I need some help with figuring out how to do this and hopefully someone here can help:
I've got movieclips of dice called "dicePicked1", "dicePicked2", etc all the way to 6. each of these movieclips has a graphics on keyframes with labels "One" to "Six".
Now I'm trying to find (in vain) a way to cross check the labels with arrays of numbers so that each time it finds a dicePicked with the appropriate label, it moves onto the next number to find. For example, I need to see if one of each dice has [1,2,3,4,5,6]. Once the program finds a dicePicked with the Label "One", it moves onto the next element which is 2 and so on.
If it finds the last element (and thus all the elements), it returns true. If it doesn't find an element (for example none of the dicePicked have a Label "Three") then it returns false. I'm trying to find a system that can accommodate different combinations and some with the same numbers multiple times (for example 3 different dicePicked have the label "three")
I'm having alot of trouble figuring out a good system for this and any help would be awesome!
Thanks and let me know if anything is unclear!

Unfortunately, your example lost me on the first roll... I don't see the combination in choosing the 1 and the 5 for 150 points. That would have me think that the roll with the 4 could be kept for 40 points. Also, I didn't see where getting a 5 or a 1 for the last roll would have yielded something.
Anyhow, if you look at what I did for the Yahtzee game, each possible combination has a function dedicated to testing for it. The difference with Yahtzee being that you have to choose which scoring element you use up for each turn, whether you earn that scoring element or forfeit it. Also keep in mind that I created that tangle of code when I was a youngin' in the programming realm, so there may be cleaner ways of dealing with things.
Since you appear to be automating the scoring process, you likely need to have something first detect that the "hold these" action has taken place and then do some evaluation on those held thru a top-down series of checks (meaning highest scoring combinations to lowest), and accept the first that fills the bill. I don't understand the logic as to why a 1 and a 5 score anything, but in any case, your code would need to have a test for that scenario. And if having the last die be a 1 or a 5 also scores, then you would need to retain something relative to that relkating to the 1 and 5 being selected earlier.

Similar Messages

Adding values from two different queries in one query

Hi,
I have developed a web template by combining 3 queries ,which were created from the same MultiProvider.These queries are having many different selections .Now I need to get the addition of values from these 2 queries into third query.
Is there any way to combine the selections from these queries into one instead of recreating them again.I tried to use global strucuture but not successful.
Kindly let me know is there any workaround for this.
Thanks & Regards,
Raja

Hi ,
You can do it by excel formula.
sheet 1 --> 1st query
sheet2 -->2nd query
sheet3--> put calculations accroding to your requirement based on sheet1 & sheet2 into sheet3.
Regards
Pcrao.

How to create a dropdown list to list the values from two different tables?

Hi,
I have the following requirement:
1. I have to create a dropdown list to display all the values from the second column of a table.
2. Another dropdown list to display all the values from the second column of another table.
3. A text box should help me to add the selected values.
How to get this done in a PDF? Please help.
Regards,
Latha

Is this a LC form? Because Acrobat forms have no concept of tables, just
individual fields...

Better approach for checking column values between two different rows

My requirement is to find best Approach to find difference between column values of two different rows.Below I've mentioned two different
approaches I'm thinking of,but I'd like to know is there any other better approach.
version details
SQL> SELECT *
2 FROM V$VERSION;
BANNER
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
PL/SQL Release 11.1.0.7.0 - Production
CORE    11.1.0.7.0      Production
TNS for Solaris: Version 11.1.0.7.0 - Production
NLSRTL Version 11.1.0.7.0 - ProductionTable creation script
CREATE TABLE R_DUMMY
   (CA_ID VARCHAR2(16) NOT NULL ENABLE,
     CA_VER_NUM NUMBER(4,2) NOT NULL ENABLE,
     BRWR_SHORT_NAME VARCHAR2(25 CHAR),
     sic_code     number,
     FAC_ID VARCHAR2(10) NOT NULL ENABLE
/ insert script
insert into r_dummy (CA_ID, CA_VER_NUM, BRWR_SHORT_NAME, sic_code, FAC_ID)
values ('CA2001/11/0002', 2.00, 'Nandu',1234, 'FA000008');
insert into r_dummy (CA_ID, CA_VER_NUM, BRWR_SHORT_NAME, sic_code, FAC_ID)
values ('CA2001/11/0002', 3.00, 'SHIJU',456, 'FA000008');Desired O/P :
ca_id               fac_id          column_name          previous name          after_modification
CA2001/11/0002          FA000008     BRWR_SHORT_NAME          Nandu               SHIJU
CA2001/11/0002          FA000008     sic_code          1234               456My approach
select      ca_id,fac_id,column_name,
     decode(column_name,'BRWR_SHORT_NAME',lg_brwr,lg_sic) previous_name ,
     decode(column_name,'BRWR_SHORT_NAME',ld_brwr,ld_sic) after_modification
from
     select
               case
                    when ld_brwr != lg_brwr then
                    'BRWR_SHORT_NAME'
                    when ld_brwr != lg_brwr then
                    'sic_code'
               end
          ) column_name,ca_id,fac_id,lg_brwr,ld_brwr,ld_sic,lg_sic
     from     (
          select ca_id,fac_id,lag_brwr,ld_brwr,ld_sic,lag_sic
          from
                    Select      lead(brwr_short_name,1) over(partition by ca_id,fac_id) ld_brwr,
                         lag(brwr_short_name,1) over(partition by ca_id,fac_id) lg_brwr,
                         lead(sic_code,1) over(partition by ca_id,fac_id) ld_sic,
                         lag(sic_code,1) over(partition by ca_id,fac_id) lg_sic,
                         ca_id,fac_id
                    from r_dummy
          where (ld_brwr != lg_brwr or ld_sic != lg_sic)
)2nd Approach :
=============
select      ca_id,fac_id,column_name,
     decode(column_name,'BRWR_SHORT_NAME',lg_brwr,lg_sic) previous_name ,
     decode(column_name,'BRWR_SHORT_NAME',ld_brwr,ld_sic) after_modification
from
     select
               case
                    when ld_brwr != lg_brwr then
                    'BRWR_SHORT_NAME'
                    when ld_brwr != lg_brwr then
                    'sic_code'
               end
          ) column_name,ca_id,fac_id,lg_brwr,ld_brwr,ld_sic,lg_sic
     from     (
          select ca_id,fac_id,brwr_short_name,sic_code
          from
                    Select      ca_id,fac_id,brwr_short_name lg_brwr,sic_code lg_sic
                    from     r_dummy
                    where     ca_ver_num = '2.00'
               )o,(
                    Select      ca_id,fac_id,brwr_short_name ld_brwr,sic_code ld_sic
                    from     r_dummy
                    where     ca_ver_num = '3.00'
                        )n
          where      0.ca_id = n.ca_id
               and 0.fac_id = n.fac_id
               and (ld_brwr != lg_brwr or ld_sic != lg_sic)
)Hi Experts,
     I've provided sample data where I'm checking for just two columns viz brwr_short_name ,sic_code,but in real time
I've to check for 8 more columns so please suggest me with a better approach.
I appreciate your precious suggestions.

Hi,
Thanks for posting the CREATE TABLE and INSERT statements; that really helps!
Here's one wa. Like your 2nd approach, this uses a self-join:
WITH     got_r_num     AS
     SELECT ca_id
     ,     ROW_NUMBER () OVER ( PARTITION BY ca_id
                               ,                    fac_id
                         ORDER BY        ca_ver_num
                             )    AS r_num
     ,     brwr_short_name
     ,     TO_CHAR (sic_code)     AS sic_code
     ,     fac_id
--     ,     ...     -- Other columns (using TO_CHAR if needed)
     FROM     r_dummy
,     unpivoted_data     AS
     SELECT     *
     FROM     got_r_num
     UNPIVOT     INCLUDE NULLS
          (    txt
          FOR column_name IN ( brwr_short_name          AS 'BRWR_SHORT_NAME'
                        , sic_code               AS 'SIC_CODE'
--                        , ...     -- Other columns
SELECT       p.ca_id
,       p.fac_id
,       p.column_name
,       p.txt          AS previous_name
,       a.txt          AS after_modification
FROM       unpivoted_data   p
JOIN       unpivoted_data   a ON p.ca_id     = a.ca_id
                       AND p.fac_id     = a.fac_id
                     AND p.column_name     = a.column_name
                     AND p.r_num      = a.r_num - 1
                     AND p.txt || 'X' != a.txt || 'X'
ORDER BY a.r_num
;To include other columns, add them in the 2 places where I put the comment "Other columns".
Ca_ver_num can have any values, not just 2.00 and 3.00.
This will show cases where a value in one of the columns changed to NULL, or where NULL changed to a value.
There ought to be a way to do this without a separate sub-query like got_r_num. According to the SQL Language manual, you can put expressions in the UPIVOT ... IN list, but when I tried
...     UNPIVOT     INCLUDE NULLS
          (    txt
          FOR column_name IN ( brwr_short_name          AS 'BRWR_SHORT_NAME'
                             , TO_CHAR (sic_code)     AS 'SIC_CODE'
          )I got the error "ORA_00917: missing comma" right after TO_CHAR. Perhaps someone else can show how to eliminate one of the sub-queries.

Cross reference data from 2 different ecc system.

Hi Sdners,
Iam working on a scenario where i have to get data from two different Ecc system,consolidate them and send it back to their respective system.
But some refernce data in both the systems are different and when iam merging data from 2 system i have to maintain either of the reference data.But problem comes when i syndicate it back to ECC ,it cannot accept a new reference data.
Please suggest me some answere how to proceed in such case.
Its urgent.
Points will be rewarded for Genuine answeres.
Thanks in advance,
Regards,
Neethu.

Hi,
First enable keymapping property to YES for the table which you want to do
importing and syndicatig.
Create two remote systems type inbound/outbound .
Import the data from first remote system and map the corresponding fields.
Don't forget to map the remotekey field which is on the destination side.Make clone
of one of the dispaly field and map to the remote key field.
After importing you can see the records from which remote system are imported
using Edit Key Mappings option in DataManager.It shows that remotesystem
name and corresponding remote key.
Do the same for second remote system too.
After merging data in data manager , you can see the merged record and see the
two remote systems names and two remote keys by using Edit Key Mappings
option so the merged record goes back to both remote systems when you syndicate
the records.
Syndicate the data from first remote system by selecting destination properties and
output remote system property under map properties tab as your first remote
system.
Do the mapping for corresponding fields and don't forget to map the value field under
remote key .Then MDM generates remote keys for only records belongs to your
first remote system.You can see this in destination preview.It does n't genarate
remote keys for second remote system.Then check the option Suppress records
without key under map properties tab and execute the syndication.Finally we can
see the accurate records.
Do the same for second remote system too.
Hope it helps
Cheers
Narendra

How to create a foreign key for the table from two different tables?

Hi All,
I have a three table like below. In the below table SAMPLE_CONS_CHECK and SAMPLE_CONS2_CHECK will be having the primary key for NAME column. The same SAMPLE_CONS3_CHECK table also having the primary key for NAME column and forieign key for SAMPLE_CONS_CHECK and SAMPLE_CONS2_CHECK tables. See the below code 2
code 1:
CREATE TABLE SAMPLE_CONS_CHECK
        (NAME VARCHAR2(10),
        SERIES VARCHAR2(5)
CREATE TABLE SAMPLE_CONS2_CHECK
        (NAME VARCHAR2(5),
         MODEL NUMBER
CREATE TABLE SAMPLE_CONS3_CHECK
        (NAME VARCHAR2(5),
         MODEL_NO NUMBER
        )code 2
alter table SAMPLE_CONS_CHECK
add constraint SAMPLE_CONS_CHECK_pk primary key (NAME)
alter table SAMPLE_CONS2_CHECK
add constraint SAMPLE_CONS2_CHECK_pk primary key (NAME)
alter table SAMPLE_CONS3_CHECK
add constraint SAMPLE_CONS3_CHECK_pk primary key (NAME)
ALTER TABLE SAMPLE_CONS3_CHECK ADD
CONSTRAINT SAMPLE_CONS3_CHECK_FK1 FOREIGN KEY
     NAME
) REFERENCES SAMPLE_CONS_CHECK
    NAME
) ON DELETE CASCADE;
ALTER TABLE SAMPLE_CONS3_CHECK ADD
CONSTRAINT SAMPLE_CONS3_CHECK_FK2 FOREIGN KEY
     NAME
) REFERENCES SAMPLE_CONS2_CHECK
    NAME
) ON DELETE CASCADE;From the above schenario i am able to insert the data to SAMPLE_CONS3_CHECK table. But the parent data is already available in the parent table. The problem is here two different constarints from two different tables. While inserting, it is checking from both the tables whether the parent is exist or not.
How can i solve this problem? Can anyone halp me about this?
Thanks
Edited by: orasuriya on Aug 8, 2009 2:02 AM

Actually the design is completely incorrect.
What you say is
I have
'foo', 'foo series'
'foo','foo model'
'foo',666
By virtue of table3 referring to both table1 and table2.
This means you actually need to have 1 (one) table:
'foo','foo series','foo model', 666
And the 'problem' disappears.
Sybrand Bakker
Senior Oracle DBA

Downloading songs from two different computers, and not recognizing songs

On my home computer, I downloaded about 40 songs onto my IPod from CDs. Then, I installed the program on my work computer, and purchased four songs from ITunes. When I plug my IPod into my work computer, it is not recognizing the songs I downloaded from my home computer. However, if I plug my IPod into my work computer, I can listen to these four purchased songs, but once I try to listen to them without having it plugged into my work computer, only the songs I downloaded from home are on the IPod.
Has this happened to anyone else who has tried to put songs from two different computers onto their IPod?

Just to elaborate a bit, you need to copy the purchased files and put them on your home computer.
Don't burn them as an audio CD as you will lose quality when you re-import them.
You can use the Shuffle (instead of a CD) to do this
Check out this link.
http://docs.info.apple.com/article.html?artnum=61131

HT5622 my stepdad used to use my phone and the imessage accounts have now joined together by mistake we don't know how it happened but is there a way we can separate the two accounts because we are able to read messages that are coming from two different

hello can i please get some help, my stepdad used to use my phone a while ago, i deleted his old account from my phone, last night out IMessages merged without us knowing how it happened, he is able to read any messages that are coming into my phone through IMessage and also i am able to read his and this is happen from two different phone, i dont know how to fix this or two separate the two accounts, is anyone able to help please

Settings>Messages Send and Receive should only have the phone number and addresses checked that you want reaching that individual devices If your step-dads number and email are checked just tap them it will remove the check.

Will a sequence return same value for two different sessions?

Is there a possibility that a sequence will return same value to two different sessions when it is referred exactly at the same instance of time?

@Justin... Thanks for your insight; indeed, we too feel this shouldn't ever happen and never heard of it either, but there it is. (No, we haven't logged a TAR yet -- whatever that is -- partly because it didn't occur to us and partly because we only recently came across the issue and sensibly want to do some testing before we cry foul.)
However, the code is pretty straight-forward, much like this (inside a FOR EACH ROW trigger body):
SELECT <seqname>.NEXTVAL INTO <keyvar> FROM DUAL;
INSERT INTO <tblname> (<keyfield>, <... some other fields>)
VALUES(<keyvar>, <... some other values> );
(where <tblname> is NOT the table on which the trigger is fired). This is the only place where the sequence is ever accessed. The sequence state is way below its limits (either MAXVALUE or <keyfield>/<keyvar> datatype size).
In this setup, end users sometimes got an out-of-the-blue SQL error to the effect that uniqueness constraint has been violated -- as I said, we used to have a unique index on <keyfield> -- which leads us to assume that the sequence generated a duplicate key (only way for the constraint to be violated, AFAIK). We released the constraint and indeed, using a simple SELECT <keyfield>, COUNT(*) FROM <tblname> GROUP BY <keyfield> HAVING COUNT(*)>1 got us some results.
Unfortunately, the <tblname> table gets regularly purged by a consumer process so it's hard to trace; now we created a logger trigger, on <tblname> this time, which tracks cases of duplicate <keyfield> inserts... We'll see how it goes.
@Laurent... winks at the CYCLE thing Our sequence is (needless to say) declared as NOCYCLE and the datatype is large enough to hold MAXVALUE.

[svn:bz-trunk] 21394: bug fix for watson 2887837 Not getting duplicate session detected error when same flex client id is used from two different HTTP sessions in CRX .

Revision: 21394
Revision: 21394
Author:   [email protected]
Date:     2011-06-16 12:34:13 -0700 (Thu, 16 Jun 2011)
Log Message:
bug fix for watson 2887837 Not getting duplicate session detected error when same flex client id is used from two different HTTP sessions in CRX.
get the sessions id before we invalidate the duplicate session.
Checkintests pass
Modified Paths:
    blazeds/trunk/modules/core/src/flex/messaging/endpoints/BaseHTTPEndpoint.java

For our profect I think this issue was caused as follows:
Believing that remoting was full asynchronous we fired a 2 or 3 remote calls to the server at the same time ( within the same function ) - usually when the users goes to a new section of the app.
This seemed to trigger the duplicate http session error since according to http://blogs.adobe.com/lin/2011/05/duplication-session-error.html two remote calls arriving before a session is created will cause 2 sessions to be created.
Our current solution ( too early to say it works ) is to daisy chain the multiple calls together .
Also there seemed to be an issue where mobile apps that never quit ( thanks Apple! ) caused the error when activated after a few hours.
I guess the session expires on the server and the error above occurs on activation.
So the mobile apps now ping the server with a remote call when activated after sleeping for more than one hour.
All duplicate http errors are silently caught and reported.
Fingers crossed we won't get any more!

Comparing row values in two different tables

Hello,
Does anyone know if it is possible to compare (and possibly highlight - which I know can be done) row values in two different tables?
I have a ZIP Code column in table A that I want to compare to a ZIP Code column in table B and highlight those ZIP Codes that are present in table B but not in table A etc. Is this possible?
Thanks,
Kenneth

To be able to apply conditional formatting, I must edit the formulas this way.
=IF(ISBLANK(B)," ",IF(ISERROR(VLOOKUP(B,Tableau 2 :: B,1,0))," ",VLOOKUP(B,Tableau 2 :: B,1,0)))
=IF(ISBLANK(B)," ",IF(ISERROR(VLOOKUP(B,Tableau 1 :: B,1,0))," ",VLOOKUP(B,Tableau 1 :: B,1,0)))
I replaces the four empty strings by strings containing one space character.
In the field supposed to contain the text which is not contained I just entered a single space character.
Yvan KOENIG (from FRANCE vendredi 12 septembre 2008 20:52:11)

Getting DISTINCT count from two different columns

Hi all,
I have following query which gives currency code from two different tables. I would like to get the distinct count of currency codes from these two different columns.
SELECT eb.person_seq_id, eb.bonus_amount, eb.currency_cd, ed.currency_cd_host
FROM fr_emp_bonuses eb, fr_emp_details ed, fr_periods p
WHERE eb.person_seq_id = ed.person_seq_id AND ed.period_seq_id = eb.period_seq_id
AND ed.period_seq_id = p.period_seq_id AND p.period_status = 'CURRENT'
AND eb.bonus_amount >= 0 AND eb.person_seq_id = 3525125;
This query gives following result
3525125     240000     USD     INR
3525125     0      USD     INR
3525125     60000      USD     INR
3525125     50000      USD     INR
There are two distinct currency codes (USD, INR) and total amount is 350000. So I am looking for a query to give me the following result
3525125     350000 2
Thanks in advance

Hi,
Here's one way:
WITH     original_query     AS
     SELECT eb.person_seq_id
     ,     eb.bonus_amount
     ,     eb.currency_cd
     ,     ed.currency_cd_host
     FROM     fr_emp_bonuses         eb
     ,     fr_emp_details          ed
     ,     fr_periods          p
     WHERE      eb.person_seq_id    = ed.person_seq_id
     AND      ed.period_seq_id    = eb.period_seq_id
     AND      ed.period_seq_id    = p.period_seq_id
     AND      p.period_status         = 'CURRENT'
     AND      eb.bonus_amount     >= 0
     AND     eb.person_seq_id    = 3525125
,     unpivoted_data     AS
     SELECT     person_seq_id
     ,     bonus_amount
     ,     currency_cd
     FROM     original_query
    UNION ALL
        SELECT person_seq_id
     ,     0               AS bonus_amount
     ,     currency_cd_host     AS currency_cd
     FROM     original_query
SELECT       person_seq_id
,       SUM (bonus_amount)          AS total_bonus_amount
,       COUNT (DISTINCT currency_cd)     AS distinct_currency_cds
FROM       unpivoted_data
GROUP BY person_seq_id
;There may be a shorter, more efficient way to get the same results, but without knowing more about your tables, I can't tell.
The tricky thing is getting two columns (currency_cd and currencuy_cd_host in this case) counted together. You can't simply say
COUNT (DISTINCT eb.currency_cd) +
COUNT (DISTINCT ed.currency_code_host)That happens to get the correct result with the sample data you posted, but what if you had data like thEe following?
currency_cd     currency_cd_host
INR          USD
USD          INRHere, the count of distinct currency_cds is 2, and the count of distinct currency_cd_hsots is also 2. Does that mean the grand total is 2 + 2 = 4? No, the 2 codes in one column arte the same 2 codes as in the other column. We need to get both currency_cd and currency_cd_hsot into the same column, and then do COUNT (DISTINCT ...) on that combined column. A UNION, as shown above, will certainly do that, starting with your query as you posted it. The query you posted isn't necessarily the best frist step towards this result, however, so there may be a much better approach, depending on your tables.
Edited by: Frank Kulash on Feb 1, 2012 6:21 PM
Here's a slightly shorter, and probably more efficient way to get the same results:
WITH     cntr     AS
     SELECT     LEVEL     AS n
     FROM     dual
     CONNECT BY     LEVEL     <= 2
SELECT       eb.person_seq_id
,       SUM (eb.bonus_amount)          AS total-amount
,       COUNT ( DISTINCT CASE
                    WHEN c.n = 1
                    THEN eb.currency_cd
                    ELSE ed.currency_cd_host
                  END
          )               AS distinct_currency_cds
FROM       fr_emp_bonuses    eb
,       fr_emp_details    ed
,       fr_periods          p
,       cntr              c
WHERE        eb.person_seq_id = ed.person_seq_id
AND        ed.period_seq_id = eb.period_seq_id
AND        ed.period_seq_id = p.period_seq_id
AND        p.period_status   = 'CURRENT'
AND        eb.bonus_amount   >= 0
AND       eb.person_seq_i   = 3525125
--       NOTE: no join condition involving c; we really do want a cross-join
GROUP BY eb.person_seq_id
;

Possible solution to avoid deadlock when two inserts happen on same table from two different machines.

Possible solution to avoid deadlock when two inserts happen on same table from two different machines.
Below are the details from deadlock trace.
Deadlock encountered .... Printing deadlock information
Wait-for graph
NULL
Node:1
KEY: 8:72057594811318272 (ffffffffffff) CleanCnt:3 Mode:RangeS-S Flags: 0x1
Grant List 2:
Owner:0x00000013F494A980 Mode: RangeS-S Flg:0x40 Ref:0 Life:02000000 SPID:376 ECID:0 XactLockInfo: 0x000000055014F400
SPID: 376 ECID: 0 Statement Type: INSERT Line #: 70
Input Buf: RPC Event: Proc [Database Id = 8 Object Id = 89923542]
Requested by:
ResType:LockOwner Stype:'OR'Xdes:0x0000002AA53383B0 Mode: RangeI-N SPID:238 BatchID:0 ECID:0 TaskProxy:(0x00000027669B4538) Value:0x10d8d500 Cost:(0/38828)
NULL
Node:2
KEY: 8:72057594811318272 (ffffffffffff) CleanCnt:3 Mode:RangeS-S Flags: 0x1
Grant List 2:
Owner:0x0000000B3486A780 Mode: RangeS-S Flg:0x40 Ref:0 Life:02000000 SPID:238 ECID:0 XactLockInfo: 0x0000002AA53383F0
SPID: 238 ECID: 0 Statement Type: INSERT Line #: 70
Input Buf: RPC Event: Proc [Database Id = 8 Object Id = 89923542]
Requested by:
ResType:LockOwner Stype:'OR'Xdes:0x000000055014F3C0 Mode: RangeI-N SPID:376 BatchID:0 ECID:0 TaskProxy:(0x000000080426E538) Value:0x30614e80 Cost:(0/41748)
NULL
Victim Resource Owner:
ResType:LockOwner Stype:'OR'Xdes:0x0000002AA53383B0 Mode: RangeI-N SPID:238 BatchID:0 ECID:0 TaskProxy:(0x00000027669B4538) Value:0x10d8d500 Cost:(0/38828)
deadlock-list
deadlock victim=process5daddc8
process-list
process id=process5daddc8 taskpriority=0 logused=38828 waitresource=KEY: 8:72057594811318272 (ffffffffffff) waittime=2444 ownerId=2994026815 transactionname=user_transaction lasttranstarted=2014-07-25T12:46:57.347 XDES=0x2aa53383b0 lockMode=RangeI-N schedulerid=43 kpid=14156 status=suspended spid=238 sbid=0 ecid=0 priority=0 trancount=2 lastbatchstarted=2014-07-25T12:46:57.463 lastbatchcompleted=2014-07-25T12:46:57.463 clientapp=pa hostname=pa02 hostpid=1596 loginname=myuser isolationlevel=serializable (4) xactid=2994026815 currentdb=8 lockTimeout=4294967295 clientoption1=671088672 clientoption2=128056
executionStack
frame procname=mydb.dbo.SaveBill line=70 stmtstart=6148 stmtend=8060 sqlhandle=0x03000800d61f5c056bd3860170a300000100000000000000
INSERT INTO [dbo].[Prod1] .....
inputbuf
Proc [Database Id = 8 Object Id = 89923542]
process id=process5d84988 taskpriority=0 logused=41748 waitresource=KEY: 8:72057594811318272 (ffffffffffff) waittime=2444 ownerId=2994024748 transactionname=user_transaction lasttranstarted=2014-07-25T12:46:57.320 XDES=0x55014f3c0 lockMode=RangeI-N schedulerid=39 kpid=14292 status=suspended spid=376 sbid=0 ecid=0 priority=0 trancount=2 lastbatchstarted=2014-07-25T12:46:57.440 lastbatchcompleted=2014-07-25T12:46:57.440 clientapp=pa hostname=pa01 hostpid=1548 loginname=myuser isolationlevel=serializable (4) xactid=2994024748 currentdb=8 lockTimeout=4294967295 clientoption1=671088672 clientoption2=128056
executionStack
frame procname=pa.dbo.SaveBill line=70 stmtstart=6148 stmtend=8060 sqlhandle=0x03000800d61f5c056bd3860170a300000100000000000000
INSERT INTO [dbo].[Prod1]....
inputbuf
Proc [Database Id = 8 Object Id = 89923542]
resource-list
keylock hobtid=72057594811318272 dbid=8 objectname=pa.dbo.prod1 indexname=PK_a id=lock1608ee1380 mode=RangeS-S associatedObjectId=72057594811318272
owner-list
owner id=process5d84988 mode=RangeS-S
waiter-list
waiter id=process5daddc8 mode=RangeI-N requestType=convert
keylock hobtid=72057594811318272 dbid=8 objectname=pa.dbo.prod1 indexname=PK_a id=lock1608ee1380 mode=RangeS-S associatedObjectId=72057594811318272
owner-list
owner id=process5daddc8 mode=RangeS-S
waiter-list
waiter id=process5d84988 mode=RangeI-N requestType=convert

Don't know. Perhaps these can help. I scanned the second link but didn't see much about Ending Deadlocks. I'd say the Fourth link probably has better information than the first three links. But maybe read them all just in case the Fourth is missing something
one of the first three have.
Deadlocking
Detecting and Ending Deadlocks
Minimizing Deadlocks
Handling Deadlocks in SQL Server
Google search for "SQL Deadlock"
La vida loca

How to handle an update of the same record from two different user in JSP

how to handle an update of the same record from two different user
how do you handle an update of the same record from two different users in JSP... if one person updates the record from one drop downs should be updated as well.. is the possible.

Usually, if two users try to update the same row at the same time, you want the first to commit to succeed, and when the second commits, they should fail with the error that the row was being concurrently updated. They you may want to show them the new row values and give them the opportunity to merge their values with the new row values...
How can you achieve this? Google optimistic locking.

[MDX]can't get the value from two variables (@FromDimTimeFiscalYearMonthWeekLastDateDay &(@ToDimTimeFiscalYearMonthWeekLastDateDay

can't get the value from two variables when execute MDX : Anyone who can help ?
================================
with member [Measures].[APGC Replied Volume] as
([Measures].[Question],[Dim Replied By].[Replied By].&[APGC])
member [Measures].[APGC Moderated Volume] as
([Measures].[DashBoard Thread Number],[Dim Moderated By].[Moderated By].&[APGC])
member [Measures].[APGC Answered Volume] as
([Measures].[Question],[Dim Answered By].[Answered By].&[APGC])
SELECT
NON EMPTY
[Measures].[Forum Thread Number],
[Measures].[Reply In24 Hour],
[Measures].[Question],
[Measures].[Deliverale Minute],
[Measures].[Working minutes],
[Measures].[Answered],
[Measures].[1D Answer],
[Measures].[2D Answer],
[Measures].[7D Answer],
[Measures].[APGC Replied Volume],
[Measures].[APGC Moderated Volume],
[Measures].[APGC Answered Volume],
[Measures].[Avg HTR],
[Measures].[Avg HTA],
[Measures].[Total Labor]
} ON COLUMNS,
NON EMPTY { ([Dim Engineer].[SubGroup-Alias].[Alias].ALLMEMBERS ) } DIMENSION PROPERTIES MEMBER_CAPTION, MEMBER_UNIQUE_NAME ON ROWS
FROM (
SELECT ( STRTOMEMBER(@FromDimTimeFiscalYearMonthWeekLastDateDay, CONSTRAINED) : STRTOMEMBER(@ToDimTimeFiscalYearMonthWeekLastDateDay,
CONSTRAINED) ) ON COLUMNS
FROM [O365]) CELL PROPERTIES VALUE, BACK_COLOR, FORE_COLOR, FORMATTED_VALUE, FORMAT_STRING, FONT_NAME, FONT_SIZE, FONT_FLAGS

Hi Ada,
According to your description, you can't get the member when using the strtomember() function in your MDX. Right?
In Analysis Services, while the member name string provided contains a valid MDX member expression that resolves to a qualified member name, the CONSTRAINED flag requires qualified or unqualified member names in the member name string. Please check if the
variable is a Multidimensional Expressions (MDX)–formatted string.
Reference:
StrToMember (MDX)
If you have any question, please feel free to ask.
Simon Hou
TechNet Community Support

Cross checking values from two different arrays

Similar Messages

Maybe you are looking for