CRVS20102 Beta 2 - Printing fails

I installed the latest beta 2 for VS 2010 as well as the runtimes. When i run my application locally on my computer, everything prints as expected and works correctly. However, when my application is running on the server as a service, I get the error below when it tries to print a report. Why? The field name is correct.
:Exception:CrystalDecisions.CrystalReports.Engine.FormulaException:
Error in File Test {405A1BB1-A3AE-4A2D-8350-E3B6EAC09411}.rpt:
Error in formula Record Selection:
'{S0102_ShipmentOrder.S0102_ShipmentNbr} = '72301''
This field name is not known.
Details: errorKind ---> System.Runtime.InteropServices.COMException:
Error in File Test {405A1BB1-A3AE-4A2D-8350-E3B6EAC09411}.rpt:
Error in formula Record Selection:
'{S0102_ShipmentOrder.S0102_ShipmentNbr} = '72301''
This field name is not known.
Details: errorKind
   at CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.GetLastPageNumber(RequestContext pRequestContext)
   at CrystalDecisions.ReportSource.EromReportSourceBase.GetLastPageNumber(ReportPageRequestContext reqContext)
   --- End of inner exception stack trace ---
   at CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e)
   at CrystalDecisions.ReportSource.EromReportSourceBase.HandleException(Exception exception)
   at CrystalDecisions.ReportSource.EromReportSourceBase.GetLastPageNumber(ReportPageRequestContext reqContext)
   at CrystalDecisions.CrystalReports.Engine.FormatEngine.PrintToPrinter(Int32 nCopies, Boolean collated, Int32 startPageN, Int32 endPageN)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.PrintToPrinter(Int32 nCopies, Boolean collated, Int32 startPageN, Int32 endPageN)
   at Lasko.SMS.SMSPrintService.SMSPrintService.printTestRpt()
:System.Runtime.InteropServices.COMException (0x80041019):
Error in File Test {405A1BB1-A3AE-4A2D-8350-E3B6EAC09411}.rpt:
Error in formula Record Selection:
'{S0102_ShipmentOrder.S0102_ShipmentNbr} = '72301''
This field name is not known.
Details: errorKind
   at CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.GetLastPageNumber(RequestContext pRequestContext)
   at CrystalDecisions.ReportSource.EromReportSourceBase.GetLastPageNumber(ReportPageRequestContext reqContext)
:Stack Trace:   at CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e)
   at CrystalDecisions.ReportSource.EromReportSourceBase.HandleException(Exception exception)
   at CrystalDecisions.ReportSource.EromReportSourceBase.GetLastPageNumber(ReportPageRequestContext reqContext)
   at CrystalDecisions.CrystalReports.Engine.FormatEngine.PrintToPrinter(Int32 nCopies, Boolean collated, Int32 startPageN, Int32 endPageN)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.PrintToPrinter(Int32 nCopies, Boolean collated, Int32 startPageN, Int32 endPageN)
   at Lasko.SMS.SMSPrintService.SMSPrintService.printTestRpt()
:SourceCrystalDecisions.ReportAppServer.DataSetConversion
Edited by: sherzog on Aug 5, 2010 2:36 PM

Are you connecting to a different datasource on that server?
Open the report and enable "Verify on 1st print" (File | report options).
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup

Similar Messages

Report printing failed with "Servlet error: An exception occurred. "

Hi,
I use Apex 3.1 in Oracle Express edition develop few applications. In one of the application, when I enable report printing in stardard reports and try to print to PDF/Excel, the servlet error occur.
I had configured FOP in my server and I can download PDF in "interative report", but for stardard report, the report printing failed.
I can successfully print the reports in my others applications. Anyone know what could be the reason which cause an application failed to print the report.
Thanks
Vincent

Does your application name have special characters? I heard that the app name has to be just letters and numbers for this to work...actually testing right now.

HP Laserjet 1100 - print fails

Hi
I have an OLD HP Laserjet 1100 which I used to be able to print from fine on my old XP (SP2) machine. I have recently set the printer up on a new laptop running XP (SP3) using a parallel to USB converter. It's using the same drivers. However, now, whenever I try print I get an immediate message saying "Print failed". Doesnt give me a reason. Just won't print!! If there is anyone out there who can help me I'd appreciate it!
Regards,
AEC
p.s. Buying a new printer is unfortunately not really an option.

Hi there. This is funny, or sad really. I have the exxact problem. When it doesn't print it says this printer is not connected.
That just can't be. What about firmware? While nosing around the HP site I noticed it says firmware needs to be updated.
I'm not sure how to do this.
Have a great day,
Zarifa

PDF Printer fails to create document

I have Adobe Acrobat 8.1.2 Standard and today suddenly I cannot create a PDF file from Word 2007. It will create PDF files of up to 5-6 pages but when I try the file that contains 657 pages it will only go to page 90 before I get this error message: Adobe PDF printer failed to create the PDF file.
I have tried this a couple of times (shut down computer in between each try) and every time I get the same error at the same page. The last attempt was 2 1/2 hours ago and I still have the little Acrobat icon turning circles in my toolbar. Can anyone tell me how to correct this problem?
I am working on a Dell Inspiron E1505 running Windows XP SP2. I bought Acrobat back in May and this is the first time I've had a problem with it.

Hi DJ, what is on page 90 (or 91) that is keeping the PDF printer from completing? Any half tones in any graphics? Any intense tables? Graphs?
Have you tried just making a PDF from that one page? Drill down to the page that is causing the problem, try removing one element at a time, printing to PDF, until you discover what one element is creating this issue.
We had some snow flakes with gradient half tones in one of our documents that was causing an issue much like you are experiencing.
J.R.

Printing fails on Epson C62 using OS 10.6 but successful using OS 10.4

When I tried to print a document using Gutenprint 5.2.3.99.1 as driver for my Epson C62 printing failed with a message: "The PPD version is not compatible with Gutenprint 5.2 3.99.1". I tried printing a jpeg photo and got the same message. I successfully printed the document and photo on another iMac using OS 10.4.11. This problem started after I upgraded from OS 10.5 to OS 10.6.
Please help.

You've probably tried, but their site suggests:
Q: I don’t see my printer driver on the Epson Macintosh Snow Leopard Support page. Where can I find a Mac OS 10.6.x driver for my product?
A: Try the following:
Rosetta needs to be installed in Snow Leopard. If necessary, install Rosetta.
Go to Drivers & Support, select your product category, then select your product name.
Select Drivers & Downloads, then select Macintosh Operating Systems from the drop-down list and click Go.
Download the Macintosh 10.5.x drivers for your product.
Note: If there are no Macintosh OS X 10.5.x drivers available for your product, download and install the Macintosh OS X 10.4.x drivers and the Common Updater software for your product.
Follow the on screen instructions to finish the driver installation.
Make sure Rosetta is intstalled.
Joe

Printing failed because PMSessionBeginCGDocumentNoDialog() returned -108.

I have the following eror when trying to print multiple emails to PDF in mail, does anyone have any idea how to resolve it?
Printing failed because PMSessionBeginCGDocumentNoDialog() returned -108.
Thanks,
DM

I'm having this identical issue. Additional symptoms I've noted:
printing from Word or Excel produces a "Word could not communicate with the printer." or "Excel could not communicate with the printer." dialog box.
Printing from PowerPoint produces a "There was a printing problem. You may need to print again or adjust your printer settings."
Printing from Photoshop appears to work, but nothing ever comes out.
Printing from Safari produces a "Error while printing." dialog box. In the console, I get a log entry for Safari that reads "Printing failed because PMSessionBeginPageNoDialog() returned -30871."
Printing from TextEdit produces a "Error while printing." dialog box. In the console, I get a log entry for TextEdit that reads "Printing failed because PMSessionBeginCGDocumentNoDialog() returned -30870."
Switching "auth-info-required" from "negotiate" back to "username,password" throws up a username/password dialog box when printing - but printing works. Switching back to "negotiate" causes a printing failure again.
CUPS access_log shows a series of "Create-Job successful-ok" for everything attempted to be printed. Nothing in error_log or page_log.
Printing to a local or an IP printer works.
trev_f, have you made any progress on the issue?

Acrobat X on OS X 10.6.8 Printing Fails

I am printing to an Epson Stylus Photo 280, and have installed the lastest Epson Printer Update 2.7 via software update.
Whenever I try and print the printer starts to make noise, but then the printing fails and I get the following error message every time:
"Error: /Library/Printers/Epson/InkjetPrinter2/Filter/rastertoescpll.app/contents/MacOS/rasteroes cpll failed"
I can print any PDF using preview, but nothing prints via Acrobat X. Any PDF I try instantly fails.
Does anyone have any ideas on this, as bascially this makes Acrobat X pretty useless.

Jonah_Lee wrote:
Well it certainly seems to be driver related.
After looking at the console logs, I decided to try out the latest Gutenprint CUPS drivers and I installed Gutenprint 5.2.7 for my Epson Stylues R280, and low and behold, if I use the Gutenprint driver, I can get Acrobat to Print. So bascially this looks like something incompatible with the Epson driver. Is anyone able to print to an R280 using Acrobat X with the Apple installed Epson drivers? Am I the only one with this problem?
The problem of asking that question is that it's probably pretty unlikely that anyone else actually running an Epson Stylus R280 and Acrobat X under 10.6.8 will actually read your question. There are just too many variables...too many printers out there. Among the dozens of people who will read the post, almost all will be running other printers or other configurations.
You might see if there are any Epson user forums to finder other users of that printer.

Printer fail with Snow Leopard 10.6.1

I have two GCC Elite printers (XL 20/600 & XL 12/600) connected on our office network. Upgraded to Snow Leopard, got them to print by using LPD process but now find that printing fails intermittently if there are a number of files in the queue.
We are design studio, using Adobe CS4. The files are no bigger or detailed than when we were on Leopard.
Any ideas?

Hi TDCP - welcome to the forums.
Printer drivers have taken a hit with SL.
Unless you know for certain that your current drivers are fully compatible with SL, you may need to look for updates in that regard. Same goes for your Adobe products.
Anything in CUPS that helps?
http://localhost:631

HP 1300 printer fails to print certain PDF documents with OSX 10.7.5.

HP 1300 printer fails to print certain PDF documents with OSX 10.7.5.

I solved this through the phone call help ( which cost me $25 ...) - there was some name colusion in the printer name - the rep basicallt uninstalled everything, did hard resent to all devices - printer, router and Mac, then installed the printer again under new name , seems to solve the problem .

[Gnome 3] cant print from USB printer, Fail to add new printer

HI all!
I installed the following:
cups
libcups
gutenprint
Then add your CUPS server's IP address or hostname into /etc/cups/client.conf, after ServerName. That is all you need. Every application should quickly find the printer(s) shared by that CUPS server.
did not understand what am i suppose to write in the client.conf: 127.0.0.1 or my hostname (thegrid)
it says that later version on cups does not require to blocklist the usblp but i did anyways
but it didnt work
i restarted the computer too
any suggestion

entodoays wrote:I have similar issue. Whenever I try adding a USB printer in Gnome Settings, it is recognised but when I click add, I get a "Adding printer failed" popup. However, I can add printers through the CUPS web interface http://localhost:631/admin.
Hi, you can install "system-config-printer" ( i think resolve your issue).
sudo pacman -S system-config-printer.
I have a Cannon PIXMA 280. My steps to install the drivers( may be help you ) :
$ sudo pacman -S cups ghostscript gsfonts
$ sudo pacman -S kdeutils-print-manager gutenprint */KDE.
$ sudo pacman -S system-config-printer gutenprint */GNOME.
$ sudo systemctl start cups.service
$ sudo systemctl enable cups.service
Best Regards.

I am trying to print off some work on my advent AW10 printer by connecting it with a usb cable to my macbook pro 13" 2011. On my laptop it keeps on saying printer failed. What do i do??

I am trying to print off some work on my advent AW10 printer by connecting it with a usb cable to my macbook pro 13" 2011. On my laptop it keeps on saying printer failed. What do i do??

Hello molad,
Welcome to Apple Support Communities.
Take a look at the article linked below, it provides troubleshooting tips that can help you solve the issue printing from your MacBook Pro.
Troubleshooting printer issues in OS X - Apple Support
So long,
-Jason

Dell C1760NW wireless print fail

Trying to get a Dell C1760nw printer to work wirelessly with OS10.6.8 laptops. Printer works fine via USB cable. It also connects and prints wirelessly via WinOS laptops, but not the Macs. Drivers are updated on all laptops. The printer firmware is updated via the WinOS laptops (no option to update the firmware via the MacOS units. grrrr).
Macs are configured for both the USB printer version and the network with IP address version, with both icons showing in the Mac printer list. MacOS seems to be connecting to the printer, because during a wireless print job attempt, the printer list icon shows a yellow "busy" light, and the text shows "Connecting to Printer with the spinning dial - it never makes the connection. The printer widget in the Doc shows a red error dot. If the print job is deleted, the printer icon status changes to green "idle" light.
Currently using the default Dell IP address for the wireless operation.
Router is Netgear N300 with WPA encryption.
Macs & Win units all successfully access the router for www and email.
The push button connection btw printer and router did not work, even for the WinOS laptops.
Printer setting report shows port9100. Is that an open port on the Mac? Where do I configure ports in OS10.6.8
Mac Firewall is on. Print sharing (and all other sharing) is disabled.
Mac can ethernet cable into the router to connect to printer via the Dell interface. Settings can be adjusted, but printing fails via ethernet - same as wireless.
Any ideas or experience?
Thanks
-B

Bit of an update:
The router successfully pings the printer as follows. Ethernet cable or wireless access via Safari from Mac laptop to the router IP address brings up the router interface. Use the router interface to ping IP address of the printer - it's a wireless ping, because the printer is not cabled to the router.
Router interface lists the printer's IP in the Attached Devices screen and identifies it as the Dell Printer.
Ping report shows 4 packets sent, 4 replys received. I think this, and the fact that the Win Laptops can print wirelessly is proof that the printer is definitely on the router's wireless network. Can anyone confirm?
Printer Report shows printer operating through port 9100 and all the other port status items are marked enable (LPD, WSD, SNMP/UPD, EWS)
Printer report also shows these Network items:
Bonjour (mDNS)=enabled
IP Filter=Off
SSid= correct network name
Network mode=Infrastructure
Wireless Status=Good
Link Chanel=6
Encryption=WPA-PSK-AES/WPA2-PSK-AES
Any thoughts? things to try?
Some 801.xxx mismatch between Mac & Router? (but the Mac connects to router for www and email)
Is a port not open on the Mac?
Is there a Link Channel setting on the Mac?
-B

CRVS2010 Beta - Load report failed

Hello,
I have been trying out Beta 2 and aside from the massive runtime installation package it is looking pretty good. Looking forward to the production release
In addition to my testing I've also got a couple end users piloting the upcoming release of my software. Occasionally they will receive the error message below. It generally happens after many reports have been either previewed or printed. Once the error occurs they must close my software and restart it. My software has the crystal reports embedded in the executable. So its not like the file cannot be found
Any thoughts would be greatly appreciated. If required I can post the code that is loading the report.
CrystalDecisions.Shared.CrystalReportsException: Load report failed. ---> System.Runtime.InteropServices.COMException: Failed to open report. at CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options) at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options) at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() --- End of inner exception stack trace --- at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob) at CrystalDecisions.CrystalReports.Engine.ReportClass.Load(String reportName, OpenReportMethod openMethod, Int16 parentJob) at CrystalDecisions.CrystalReports.Engine.ReportDocument.EnsureLoadReport() at CrystalDecisions.CrystalReports.Engine.ReportDocument.SetDataSourceInternal(Object val, Type type) at CrystalDecisions.CrystalReports.Engine.ReportDocument.SetDataSource(DataSet dataSet) at Wield.Invoices.frmInvoice.toolReprint_Click(Object sender, SmartItemClickEventArgs e)
Edited by: Don Williams on Oct 9, 2010 8:17 AM

Hi Tim,
Just add the all or most of the CrystalDecisions.ReportAppServer.* assemblies and now you are using InProc RAS. No need to connect to BOE, but with a few lines of code change it's easy enough to do.
As for samples take any of them, just remove the references to Enterprise and change your open method. Here's my sample app open report dialog box and code:
In the System load use these lines for either, not both:
    public class frmMain : System.Windows.Forms.Form
        CrystalDecisions.CrystalReports.Engine.ReportDocument rpt = new CrystalDecisions.CrystalReports.Engine.ReportDocument();
        ISCDReportClientDocument rptClientDoc;
Then when opening the report from a dialog box:
          private void btnOpenReport_Click(object sender, System.EventArgs e)
               rptClientDoc = new ReportClientDocumentClass();
          if (openFileDialog.ShowDialog() == DialogResult.OK)
                    btnOpenReport.Enabled = false;
                    btnSaveRptAs.Enabled = false;
                    object rptName = openFileDialog.FileName;
                                rpt.Load(rptName.ToString());
                                rptClientDoc = rpt.ReportClientDocument;
                    MessageBox.Show("Report opened.","RAS",MessageBoxButtons.OK,MessageBoxIcon.Information );
                    btnOpenReport.Enabled = true;
                    btnSaveRptAs.Enabled = true;
There are multiple ways to do everything but RAS is the replacement for the RDC and Report Creation API's.
Then just preview as you normally would specifying which report object to use:
            crystalReportViewer1.ReportSource = rpt; // for inproc
Thanks again
Don

Samsung printer fails after update to CUPS 1.7.5

On July 31 I updated my system and cups-1.7.4-1-x86_64, cups-filters-1.0.54-1-x86_64 and libcups-1.7.4-1-x86_64 got updated to cups-1.7.5-1-x86_64, cups-filters-1.0.55-1-x86_64 and libcups-1.7.5-1-x86_64, respectively. I just tried to print something, but instead of the page that should be printed, my printer, a Samsung ML-2165, printed:
INTERNAL ERROR - Incomplete Session by time out
POSITION: 0x9eee (40686)
SYSTEM: h6fw_5.53/os_hook
LINE: 1353
VERSION: SPL 5.53 07-22-2011
I'm using the Samsung ML-2160 printer driver, which worked flawlessly until recently (note that in the beginning I had problems printing more than 1 job without resetting the printer, as stated in the comments, but this issue magically went away).
I decided to set LogLevel to 'debug' and now my /var/log/cups/error_log reads:
D [04/Aug/2014:17:56:20 +0200] [Job 73] The following messages were recorded from 17:44:25 to 17:56:20
D [04/Aug/2014:17:56:20 +0200] [Job 73] Unloading...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Loading attributes...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Unloading...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Loading attributes...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Unloading...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Loading attributes...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Job restarted by user.
D [04/Aug/2014:17:56:20 +0200] [Job 73] time-at-processing=1407167771
D [04/Aug/2014:17:56:20 +0200] [Job 73] 3 filters for job:
D [04/Aug/2014:17:56:20 +0200] [Job 73] pdftopdf (application/pdf to application/vnd.cups-pdf, cost 66)
D [04/Aug/2014:17:56:20 +0200] [Job 73] pdftops (application/vnd.cups-pdf to application/vnd.cups-postscript, cost 100)
D [04/Aug/2014:17:56:20 +0200] [Job 73] rastertosamsungspl (application/vnd.cups-postscript to printer/Samsung_ML-2160_Series, cost 0)
D [04/Aug/2014:17:56:20 +0200] [Job 73] job-sheets=none,none
D [04/Aug/2014:17:56:20 +0200] [Job 73] argv[0]="Samsung_ML-2160_Series"
D [04/Aug/2014:17:56:20 +0200] [Job 73] argv[1]="73"
D [04/Aug/2014:17:56:20 +0200] [Job 73] argv[2]="****"
D [04/Aug/2014:17:56:20 +0200] [Job 73] argv[3]="****straat 4 - Google Maps"
D [04/Aug/2014:17:56:20 +0200] [Job 73] argv[4]="1"
D [04/Aug/2014:17:56:20 +0200] [Job 73] argv[5]="EdgeControl=Fine number-up=1 JCLDarkness=NORMAL PageSize=A4 Resolution=600dpi noJCLSkipBlankPages InputSlot=Auto TonerSaveMode=Save MediaType=None job-uuid=urn:uuid:124f4d31-4e75-303a-5dd2-9da2273f0de5 job-originating-host-name=localhost time-at-creation=1407167054 time-at-processing=1407167771"
D [04/Aug/2014:17:56:20 +0200] [Job 73] argv[6]="/var/spool/cups/d00073-001"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[0]="CUPS_CACHEDIR=/var/cache/cups"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[1]="CUPS_DATADIR=/usr/share/cups"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[2]="CUPS_DOCROOT=/usr/share/cups/doc"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[4]="CUPS_REQUESTROOT=/var/spool/cups"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[5]="CUPS_SERVERBIN=/usr/lib/cups"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[6]="CUPS_SERVERROOT=/etc/cups"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[7]="CUPS_STATEDIR=/run/cups"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[8]="HOME=/var/spool/cups/tmp"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[9]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/bin:/bin:/usr/bin"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[10]="SERVER_ADMIN=root@dc7800"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[11]="SOFTWARE=CUPS/1.7.5"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[12]="TMPDIR=/var/spool/cups/tmp"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[13]="USER=root"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[14]="CUPS_MAX_MESSAGE=2047"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[15]="CUPS_SERVER=/run/cups/cups.sock"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[16]="CUPS_ENCRYPTION=IfRequested"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[17]="IPP_PORT=631"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[18]="CHARSET=utf-8"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[19]="LANG=en_US.UTF-8"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[20]="PPD=/etc/cups/ppd/Samsung_ML-2160_Series.ppd"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[21]="RIP_MAX_CACHE=128m"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[22]="CONTENT_TYPE=application/pdf"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[23]="DEVICE_URI=usb://Samsung/ML-2160%20Series?serial=Z7CYB8GCAA003YK"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[24]="PRINTER_INFO=Samsung ML-2160 Series"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[25]="PRINTER_LOCATION="
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[26]="PRINTER=Samsung_ML-2160_Series"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[27]="PRINTER_STATE_REASONS=none"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[28]="CUPS_FILETYPE=document"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[29]="FINAL_CONTENT_TYPE=printer/Samsung_ML-2160_Series"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[30]="AUTH_I****"
D [04/Aug/2014:17:56:20 +0200] [Job 73] Started filter /usr/lib/cups/filter/pdftopdf (PID 4266)
D [04/Aug/2014:17:56:20 +0200] [Job 73] Started filter /usr/lib/cups/filter/pdftops (PID 4267)
D [04/Aug/2014:17:56:20 +0200] [Job 73] Started filter /usr/lib/cups/filter/rastertosamsungspl (PID 4268)
D [04/Aug/2014:17:56:20 +0200] [Job 73] Started backend /usr/lib/cups/backend/usb (PID 4269)
D [04/Aug/2014:17:56:20 +0200] [Job 73] Restarted by "root".
D [04/Aug/2014:17:56:20 +0200] [Job 73] pdftops - copying to temp print file "/var/spool/cups/tmp/010ab53e725fc"
D [04/Aug/2014:17:56:20 +0200] [Job 73] Loading USB quirks from "/usr/share/cups/usb".
D [04/Aug/2014:17:56:20 +0200] [Job 73] Loaded 68 quirks.
D [04/Aug/2014:17:56:20 +0200] [Job 73] Printing on printer with URI: usb://Samsung/ML-2160%20Series?serial=Z7CYB8GCAA003YK
D [04/Aug/2014:17:56:20 +0200] [Job 73] libusb_get_device_list=11
D [04/Aug/2014:17:56:20 +0200] [Job 73] STATE: +connecting-to-device
D [04/Aug/2014:17:56:20 +0200] [Job 73] STATE: -connecting-to-device
D [04/Aug/2014:17:56:20 +0200] [Job 73] Printer found with device ID: MFG:Samsung;CMD:SPL,FWV,PIC,EXT;MDL:ML-2160 Series;CLS:PRINTER;MODE:SPL5,R0STATUS:BUSY; Device URI: usb://Samsung/ML-2160%20Series?serial=Z7CYB8GCAA003YK
D [04/Aug/2014:17:56:20 +0200] [Job 73] Device protocol: 2
D [04/Aug/2014:17:56:20 +0200] [Job 73] Sending data to printer.
D [04/Aug/2014:17:56:20 +0200] [Job 73] Set job-printer-state-message to "Sending data to printer.", current level=INFO
D [04/Aug/2014:17:56:20 +0200] [Job 73] Printer make and model: Samsung LaserPrinter
D [04/Aug/2014:17:56:20 +0200] [Job 73] Running command line for pstops: pstops 73 mk '****straat 4 - Google Maps' 1 'EdgeControl=Fine JCLDarkness=NORMAL PageSize=A4 Resolution=600dpi noJCLSkipBlankPages InputSlot=Auto TonerSaveMode=Save MediaType=None job-uuid=urn:uuid:124f4d31-4e75-303a-5dd2-9da2273f0de5 job-originating-host-name=localhost time-at-creation=1407167054 time-at-processing=1407167771'
D [04/Aug/2014:17:56:20 +0200] [Job 73] Using image rendering resolution 600 dpi
D [04/Aug/2014:17:56:20 +0200] [Job 73] Running command line for gs: gs -q -dNOPAUSE -dBATCH -dSAFER -sDEVICE=ps2write -sOUTPUTFILE=%stdout -dLanguageLevel=3 -r600 -dCompressFonts=false -dNoT3CCITT -dNOINTERPOLATE -c 'save pop' -f /var/spool/cups/tmp/010ab53e725fc
D [04/Aug/2014:17:56:20 +0200] [Job 73] Started filter gs (PID 4275)
D [04/Aug/2014:17:56:20 +0200] [Job 73] Started filter pstops (PID 4276)
D [04/Aug/2014:17:56:20 +0200] [Job 73] PID 4266 (/usr/lib/cups/filter/pdftopdf) exited with no errors.
D [04/Aug/2014:17:56:20 +0200] [Job 73] Page = 595x842; 12,12 to 582,830
D [04/Aug/2014:17:56:20 +0200] [Job 73] slow_collate=0, slow_duplex=0, slow_order=0
D [04/Aug/2014:17:56:20 +0200] [Job 73] Before copy_comments - %!PS-Adobe-3.0
D [04/Aug/2014:17:56:20 +0200] [Job 73] %!PS-Adobe-3.0
D [04/Aug/2014:17:56:20 +0200] [Job 73] %%BoundingBox: 0 0 596 842
D [04/Aug/2014:17:56:20 +0200] [Job 73] %%HiResBoundingBox: 0 0 596.00 842.00
D [04/Aug/2014:17:56:20 +0200] [Job 73] %%Creator: GPL Ghostscript 914 (ps2write)
D [04/Aug/2014:17:56:20 +0200] [Job 73] %%LanguageLevel: 2
D [04/Aug/2014:17:56:20 +0200] [Job 73] %%CreationDate: D:20140804175611+02'00'
D [04/Aug/2014:17:56:20 +0200] [Job 73] %%Pages: 1
D [04/Aug/2014:17:56:20 +0200] [Job 73] %%EndComments
D [04/Aug/2014:17:56:20 +0200] [Job 73] Before copy_prolog - %%BeginProlog
D [04/Aug/2014:17:56:20 +0200] [Job 73] Before copy_setup - %%Page: 1 1
D [04/Aug/2014:17:56:20 +0200] [Job 73] Before page loop - %%Page: 1 1
D [04/Aug/2014:17:56:20 +0200] [Job 73] Copying page 1...
D [04/Aug/2014:17:56:20 +0200] [Job 73] pagew = 570.0, pagel = 817.0
D [04/Aug/2014:17:56:20 +0200] [Job 73] bboxx = 0, bboxy = 0, bboxw = 595, bboxl = 842
D [04/Aug/2014:17:56:20 +0200] [Job 73] PageLeft = 12.5, PageRight = 582.5
D [04/Aug/2014:17:56:20 +0200] [Job 73] PageTop = 829.5, PageBottom = 12.5
D [04/Aug/2014:17:56:20 +0200] [Job 73] PageWidth = 595.0, PageLength = 842.0
D [04/Aug/2014:17:56:20 +0200] [Job 73] Wrote 1 pages...
D [04/Aug/2014:17:56:20 +0200] [Job 73] PID 4276 (pstops) exited with no errors.
D [04/Aug/2014:17:56:20 +0200] [Job 73] PID 4275 (gs) exited with no errors.
D [04/Aug/2014:17:56:20 +0200] [Job 73] PID 4267 (/usr/lib/cups/filter/pdftops) exited with no errors.
D [04/Aug/2014:17:56:20 +0200] [Job 73] Read 158 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Wrote 158 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Read 519 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Wrote 519 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Read 519 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Wrote 519 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Read 8192 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Wrote 8192 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Read 7963 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Wrote 7963 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Read 4901 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Wrote 4901 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Read 4442 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Wrote 4442 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Read 8192 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Wrote 8192 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Read 1679 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Wrote 1679 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Read 7846 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Wrote 7846 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Samsung_ML-2160_Series: spl2.c:1322: RenderGDI: Assertion `ul_comp_size < ul_band_size' failed.
D [04/Aug/2014:17:56:20 +0200] [Job 73] Sent 44411 bytes...
D [04/Aug/2014:17:56:20 +0200] [Job 73] PID 4268 (/usr/lib/cups/filter/rastertosamsungspl) crashed on signal 6.
D [04/Aug/2014:17:56:20 +0200] [Job 73] Hint: Try setting the LogLevel to "debug" to find out more.
D [04/Aug/2014:17:56:20 +0200] [Job 73] Waiting for read thread to exit...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Read thread still active, aborting the pending read...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Resetting printer.
D [04/Aug/2014:17:56:20 +0200] [Job 73] PID 4269 (/usr/lib/cups/backend/usb) exited with no errors.
D [04/Aug/2014:17:56:20 +0200] [Job 73] End of messages
D [04/Aug/2014:17:56:20 +0200] [Job 73] printer-state=3(idle)
D [04/Aug/2014:17:56:20 +0200] [Job 73] printer-state-message="Filter failed"
D [04/Aug/2014:17:56:20 +0200] [Job 73] printer-state-reasons=none
(I wiped out some confidential information)
Notice the failure of the RenderCGI assertion, likely causing the crash of rastertosamsungspl. I searched on the net, but didn't find a solution. However, I remembered that the CUPS packages were updated a few days ago and I manually downgraded to the previous releases. This solved the problem for now.
Can someone see what's changed in the last release, especially regarding communication with a printer driver?

Some older servers don't know what to do with unknown extensions. They are supposed to ignore them, but some actually close the connections with an error. By encapsulating, you are essentially stripping off any extensions because there is no such thing in the SSLv2 format. Suggest upgrading server if possible.

Fax printer fails to work

Hi folks,
The Fax_Printer fails to work after running "pacman -Syu".
On;
File --> Print --> Fax_Printer --> Print
No response. The dialer does not popup for typing phone number
On browser
localhost:631/printers
Fax_Printer
Warning:
"recoverable: Network host 'locahost' is busy; wiill retry in 25 seconds...."
However no further response popup.
$ cat /etc/cups/cupsd.conf
DefaultEncryption IfRequested
LogLevel info
SystemGroup sys root
# Only listen for connections from the local machine.
Listen localhost:631
# Show shared printers on the local network.
Browsing On
BrowseOrder allow,deny
BrowseAllow all
DefaultAuthType Basic
<Location />
Allow localhost
# Restrict access to the server...
Order allow,deny
</Location>
<Location /admin>
Allow localhost
# Restrict access to the admin pages...
Order allow,deny
</Location>
<Location /admin/conf>
AuthType Basic
Require user @SYSTEM
Allow localhost
# Restrict access to the configuration files...
Order allow,deny
</Location>
<Policy default>
<Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscriptio
Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume
Job CUPS-Move-Job>
Require user @OWNER @SYSTEM
Order deny,allow
</Limit>
<Limit Pause-Printer Resume-Printer Set-Printer-Attributes Enable-Printer Disable-Printer Pause-Printer-After-Curre
t-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startu
-Printer Promote-Job Schedule-Job-After CUPS-Add-Printer CUPS-Delete-Printer CUPS-Add-Class CUPS-Delete-Class CUPS-Ac
ept-Jobs CUPS-Reject-Jobs CUPS-Set-Default>
AuthType Basic
Require user @SYSTEM
Order deny,allow
</Limit>
<Limit CUPS-Authenticate-Job>
Require user @OWNER @SYSTEM
Order deny,allow
</Limit>
<Limit All>
Order deny,allow
</Limit>
</Policy>
$ cat /etc/hosts
# /etc/hosts: static lookup table for host names
#<ip-address> <hostname.domain.org> <hostname>
127.0.0.1 localhost.localdomain localhost arch.satimis.com
192.168.0.52 arch.satimis.com
# End of file
The modem is on.
$ sudo /etc/rc.d/cups restart
:: Stopping CUPS Daemon [DONE]
:: Starting CUPS Daemon [DONE]
Please advise where I have to check? TIA
However both HP_Printer and PDF_Printer are working w/o problem.
Edit:
Performed further test as follows;
$ lsmod|grep lp
lp 11972 0
parport 38156 3 parport_pc,ppdev,lp
$ dmesg|grep lp
On node 0 totalpages: 261983
Calibrating delay using timer specific routine.. 3620.49 BogoMIPS (lpj=6031192)
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
lp: driver loaded but no devices found
lp0: using parport0 (interrupt-driven).
lp: driver loaded but no devices found
$ ls -l /dev/lp0
crw-rw---- 1 root lp 6, 0 2008-04-16 21:43 /dev/lp0
$ sudo pacman -Syu
Password:
:: Synchronizing package databases...
core 24.5K 33.5K/s 00:00:01 [#####################] 100%
extra is up to date
community 331.3K 198.1K/s 00:00:02 [#####################] 100%
archlinuxfr is up to date
:: Starting full system upgrade...
resolving dependencies...
looking for inter-conflicts...
Targets: rsync-3.0.2-1 abs-2.0-3
Total Download Size: 0.27 MB
Proceed with installation? [Y/n] Y
:: Retrieving packages from core...
abs-2.0-3-x86_64 7.4K 27.8K/s 00:00:00 [#####################] 100%
:: Retrieving packages from extra...
rsync-3.0.2-1-x86_64 266.2K 120.3K/s 00:00:02 [#####################] 100%
checking package integrity...
(2/2) checking for file conflicts [#####################] 100%
(1/2) installing rsync [#####################] 100%
==> ABS now uses rsync, instead of cvsup, to synchronize your tree.
==> Please note the new configuration in /etc/abs.conf
warning: /etc/abs/supfile.unstable saved as /etc/abs/supfile.unstable.pacsave
warning: /etc/abs/supfile.testing saved as /etc/abs/supfile.testing.pacsave
warning: /etc/abs/supfile.extra saved as /etc/abs/supfile.extra.pacsave
warning: /etc/abs/supfile.core saved as /etc/abs/supfile.core.pacsave
warning: /etc/abs/supfile.community saved as /etc/abs/supfile.community.pacsave
warning: /etc/abs/abs.conf saved as /etc/abs/abs.conf.pacsave
(2/2) upgrading abs [#####################] 100%
Reboot Archlinux. No warning in connection with udev was found on text scrolling. Problem remains
I found "FS#9867 - /dev/lp0 not created by udev"
http://bugs.archlinux.org/task/9867
The case is similar to mine. Problem happens after running update/upgrade. Previously the Fax_Printer worked w/o problem.
Remark: I have WindowsXP running on this box (on another HD). Sending and receiving faxes are w/o problem.
I think I have to downgrade "udev" if w/o a solution. Please advise how to do it? TIA
B.R.
satimis
Last edited by satimis (2008-04-16 14:58:13)

Please provide the following relevant information so someone can help including:
Printer Model -
Detailed Problem Description -
Operating System of computer (including service pack revision) - Done
Connection Method - USB, Hardwired LAN, Wireless? -
Make and model of router and modem? -
Error messages - on printer screen and/or computer, any blinking light patterns?
If wireless, when the problem occurs, what is status of Blue Wireless light on printer, on, off or blinking? -
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

CRVS20102 Beta 2 - Printing fails

Similar Messages

Maybe you are looking for