Crystal Reports are not centered when viewing on Crystal Viewer

Hi
I´d like to ask you if you reported some problem of using subreports and during the visualization from the Crystal Viewer the main report and of course the subreports are not centered. I´m running Vs.Net 2005 with CR 10.
The main report and subreports access ADO.NET. Only one parameter is passed by the user. If we test the application and address the visualization to the crystal report viewer it is showed on right side even using DisplayGroupTree = False. But if we export the report to PDF it is showed centered. Is it a way to fix this one?
Any advice or suggestions?
Tks,
Isocler

When you say you're using v10 with VS2005, do you mean the full CR v10 product or the version that comes with VS.NET 2005 (version 10.2)? Make sure you're using/referencing the 10.2.* CR assemblies in your project, as the 10.0.* are not supported.
If you have the correct assemblies referenced, then make sure you have the latest patches applied. I think there may have been a fix for DIV tags.
-MJ

Similar Messages

Crystal Report Alerts not firing when no records are fetched from the DB

Hello,
The crystal report alert i have created in the report in the event of no records being fetched from the query is not firing. The condition used is isnull ( count(DB Field ) ).
Is there a limitation with alerts that they would be fired only when some records are fetched in the report.
Appreciate any pointers
-Jayakrishnan

hi Jayakrishnan,
as alerts require records to be returned here's what you will need to do:
1) delete your current alert
2) create a new formula with syntax like
isnull(DistinctCount ()) or DistinctCount () = 0
3) create a new Subreport (which you will put in a report header)
4) the subreport can be based off of any table
5) have the subreport record selection always return only 1 record...for performance reasons
6) change the subreport link to be based on the new formula
7) the link will be a one way link in that you will not use the "Select data in subreport based on field" option
8) now in the subreport, create the Alert based on the parameter created by the subreport link
i have tested this and it works great.
jamie

Crystal report parameters not available when running from within SAP B1

Hi
I have found this problem a few times already and I think it is now about time I find a solution for it.
On my latest Crystal report, I have 2 parameters.
The 1e is a dynamic parameter, allowing the user to select multiple groups.
The 2nd is also a dynamic parameter, allowing the user to select only a single item.
These parameters works fine in Crystal and do what they are supposed to do.
After publishing the report in SAP Busines One (SBO) and viewing it from within SBO, the 2 parameter prompts are still there but without the dynamic list to select any data from.
On a previous report where a parameter has been defined as "Any value can be entered for the parameter" once again worked fine in crystal but from within SBO the parameter allowed no value to be entered.
Have anyone got a solution for this.
Regards
Burger

Sorry guys
You have lost me. I have searched the form and I have worked through the whole pdf you suggested.
I have no idea what I am supposed to do or see or use "ItemGroup@ SELECT ItmsGrpCod, ItmsGrpNam FROM OITB ORDER BY ItmsGrpCod"
As a test I created a test report with the following parameters to test how it would present itself in B1
1.     A static parameter with no list. Allow custom Values = True, Allow Multiple Values = True u2013 B1 result. A box that I could enter anything. Defeating the object as I wanted a list of valid options
2.     A static parameter with no list. Allow custom Values = True, Allow Multiple Values = False u2013 B1 result. A box that I could enter anything. Defeating the object as I wanted a list of valid options
3.     A static parameter with a list. Allow custom Values = True, Allow Multiple Values = True u2013 B1 result. A box that I could select multiple values from a list. I could not add my own value. Defeating the object as the list is static
4.     A static parameter with a list. Allow custom Values = True, Allow Multiple Values = False u2013 B1 result. A drop down box where I could select one of the values. Defeating the object as the list is static
5.     A static parameter with a list. Allow custom Values = False, Allow Multiple Values = False u2013 B1 result. Same as in point 4
6.     A Dynamic parameter. Allow custom Values = True, Allow Multiple Values = False u2013 B1 result. Same as in point 1 & 2. No Dynamic list returned and can not add own option
As mentioned. All the parameters work in Crystal as one expect it to. What I am after is what should I change in B1 so that the report works the same as in Crystal.
Where in B1 should it be changes and to what should it be changed.
If the changes should be done in crystal to cater for B1 then what should be changes where to what
I am not that familiar with B1.
In my test report I use B1 table OITM.
My parameter is Item (Crystal syntax {?Item}) and I use it in a filter to say {OITM.ItemCode} = {?Item}
Regards
Burger

Changes in Crystal reports are not reflecting after publishing

Dear SDN Mates,
We are facing problem with Crystal reports. After making the changes in the crystal reports, it is not reflecting in the portal after publishing. Still it is showing the older version of the report.
Can anyone please help me on this.
Thanks and Regards
Arun S

Hello Prathamesh,
After publishing the report, we require some changes in the report and doing some modifications in crystal report and again we are publishing this report. After publishing the report for second time, those changes are not reflecting in the BOE portal.
This is happening for all reports. Can you please suggest me on this.
Thanks and regards
Arun S

Crystal Report Connection not Mapping When Published After BW Transport

We are publishing a Crystal Report through SAP BW to BOE in order to leverage some of the benefits of doing so, rather than saving directly to BOE. However, after transporting the report from SAP BW DEV to SAP BW QA and then publishing into BOE QA, the connection of the report still points back to the SAP BW DEV system.
Does anyone have a best practices procedure for transporting reports through the SAP BW path to Production and then publishing to BOE?
What is the best method for updating the report connection after it has been transported and published?
Thanks,
Josh

Our configuration was fine. As it turns, out there are some additional development steps associated with dynamic paramters against an SAP BW backend that required the use of the BOE Business View Manager tool to resolve. The input paramters required their own connection which also had to be migrated.
We seem to have a basic procedural solution in place, but I'd still love to hear of any best practices if anyone has any.
Thanks,
Josh

Some Crystal Reports are not using the Cache Server

Hi...we are currently running BOE XI R2 SP2. I setup a server group with a Cache Server and a Page Server. In the CMC, I set this cache server to keep reports cached for 15 minutes. On the Process tab of some reports, I specifically set the report to use this new server group. On some of the reports this works as expected. For others, it does not appear to be since the cache folder's Date Modified date does not change. So far the only similarity between the reports that do not use cache is that these reports have sub-reports. Has anyone experienced this before? If so, how did you resolve it?
Thanks!

Hi Rich,
the connectivity on the Designer an don the BusinessObjects system is identical. Is region the only characteristic being used in the report ? which connectivity did you use in Crystal Reports ?
ingo

Pix are not centered when i print . tryed everything i kow to fix problem, help me please

Like I said (re-above) I can't fix or figure out why my pix are printing out not centered on paper .. I tryed everything that I know and it's starting to cost to much to just print pix and keep getting the same result . Please Help me if you can. Thank
you.

What printer are you using?
What OS are you using?
What program are you using to print?
What kind of paper are you printing on?
How is the printer connected to the computer?
HP designed a quick and easy tool that diagnoses and resolves many printing, scanning, and connectivity problems: The HP Print and Scan Doctor. HP recommends that you download and install the Print and Scan Doctor any time you need to troubleshoot a problem with your HP printer from the link below.
Let me know what errors you receive?
HP Printer Utilities Page
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Reports are not run when connect VPN

I have installed Oracle Forms & Report Services (Standalone) on windowXP (SP-3). My problem is:-
1) After restart OS i connect VPN when VPN is properly connected i run my application. Forms run properly but when i want to run report it shows error 'rep-51002: Bind to report server rep_localhost_bs_appsrv failed'.
2) After restart OS i did not connect VPN and then run reports its running properly and not showing any error.
I want the solution of 1st case. Please help me urgent.

You need to put the IP address in the hosts file.
Also verify if your Default Gateway at networking level is configured for the NIC. The Default Gateway information could be displayed executing 'netstat -anr'.
Also check the network through nslookup.
Is http service is running?
How many network adapters are there?
Has IP address changed?
What's your operating system?
Also don't say urgent in your questions, because urgent questions are answered by the paid support.
regards

Some report fields not displaying when users view reports in a Citrix

Hi All, got a weird one.
We have an app developed in MS Visual Studio 2007 that utilizes .NET crystal reports. Our users access these reports through citrix. Most of teh time, most people can view these reports correctly. SOME of the time, however, certain fields will disappear. The report still runs the same (grouping, ordering, etc) but key information is missing.
After re deploying the reports and / or clearing the user's roaming profile then everything is good for a while, so I know it has something to do with a temp or cached version of the report. is there a way to set .net crystal reports to NOT cache AKA create new every time?
Any assistance would be greatly appreciated!
JOhn.

Hi John,
Yes and Yes.... 14 years...
Multiple Commands and multiple data sources without being linked can cause problems if you also use SQL Expressions. If you try to add more than one data source in the Designer you'll get a pop up warning about server side grouping and SQLExpressions can not be used.
But I don't think this would be the cause. May be a result of the option logically internal to CR but I don't think the data source would be the issue, again you said the info is there just not displayed.
Do they have access to run your app without going through Citrix? Possibly running your app using Remote Desktop. Could rule out if it's a CR issue. I think this may be a GDIPlus problem, it is the dll that renders the page and could be dropping the objects. I know MS has been patching it lately to plug security holes....
One option, if they can, is to use [Modules |https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip], get then to run it when the reports are working and then again when they are not and see if there are any dll differences...
I have heard of a few other cases with Citrix and I believe it was narrowed down to being a Citrix problem and that was as far as we could take it....
Process Monitor may help but if it's random it's a lot of info to go through to determine the cause.
Maybe logging a case with Citrix might help also....
Thanks again
Don

I burned my first iDVD andpicture quality is not good. Originals are excellent. My photos are shot in raw or jpeg, both are not sharp when I view my DVD. I viewed it on my 1080 dpi tv and my new apple computer.

I burned my first iDVD andpicture quality is not good. Originals are excellent. My photos are shot in raw or jpeg, both are not sharp when I view my DVD. I viewed it on my 1080 dpi tv and my new apple computer.

There are many ways to produce slide shows using iPhoto, iMovie or iDVD and some limit the number of photos you can use (iDVD has a 99 chapter (slide) limitation).
If what you want is what I want, namely to be able to use high resolution photos (even 300 dpi tiff files), to pan and zoom individual photos, use a variety of transitions, to add and edit music or commentary, place text exactly where you want it, and to end up with a DVD that looks good on both your Mac and a TV - in other words end up with and end result that does not look like an old fashioned slide show from a projector - you may be interested in how I do it. You don't have to do it my way, but the following may be food for thought!
Firstly you need proper software to assemble the photos, decide on the duration of each, the transitions you want to use, and how to pan and zoom individual photos where required, and add proper titles. For this I use Photo to Movie. You can read about what it can do on their website:
http://www.lqgraphics.com/software/phototomovie.php
(Other users here use the alternative FotoMagico: http://www.boinx.com/fotomagico/homevspro/ which you may prefer - I have no experience with it.)
Neither of these are freeware, but are worth the investment if you are going to do a lot of slide shows. Read about them in detail, then decide which one you feel is best suited to your needs.
Once you have timed and arranged and manipulated the photos to your liking in Photo to Movie, it exports the file to iMovie as a DV stream. You can add music in Photo to Movie, but I prefer doing this in iMovie where it is easier to edit. You can now further edit the slide show in iMovie just as you would a movie, including adding other video clips, then send it to iDVD 7, or Toast, for burning.
You will be pleasantly surprised at how professional the results can be!
To simply create a slide show in iDVD 7 onwards from images in iPhoto or stored in other places on your hard disk or a connected server, look here:
http://support.apple.com/kb/HT1089

Crystal reports 2008 not working on 64 bit OS

Hello Everybody,
I have developed crystal reports in CR2008. My development environment is 32 bit OS with visual studio 2005 and it is working fine. When I deployed this applciation into 64 bit OS,application is working fine,but reports are not working/displaying.
Thanks
Ram

I moved your post to the .NET - SAP Crystal Reports forum. You'd never have gotten an answer on the CR Design forum
More info needed:
Exact version of CR (Help | About)?
Web or win app?
More details on:
reports are not working/displaying
Errors? Do you get the viewer? Or just an empty form?
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup

Lync monitoring Details reports are not getting opened, Getting SQL error like "Cannot impersonate user for data source 'CDRDB"

Hi,
Two month before, We have deployed Lync 13 set up with lync monitoring and archiving service enabled. After configuring we have the Lync monitoring and archiving services are working fine... few weeks back I have changed the Admin Password
of the Lync Setup. After that Lync Monitoring and Archiving services are not working.
when I try open Lync monitoring service from web UI,
http://localhost/ReportServer_LyncMonitoring/
Web UI is opening but Reports home page is not Accessible , Getting error Like
"An error has occurred during report processing. (rsProcessingAborted)
Cannot impersonate user for data source 'CDRDB'. (rsErrorImpersonatingUser)
Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
The user name or password is incorrect"
Please help me to trouble shoot this problem.
Thanks,
Rajarajan.D

Hi Rajarajan.D
You probably need to update the password against the CDRDB datasource in SSRS Report manager, take a look at this article: http://lyncme.co.uk/microsoft-lync-server-2013/cannot-impersonate-user-for-data-source-cdrdb-rserrorimpersonatinguser-error/
If this helped you please click "Vote As Helpful" if it answered your question please click "Mark As Answer"
Georg Thomas | Lync MVP
Blog www.lynced.com.au | Twitter
@georgathomas
Lync Edge Port Check (Beta)
This forum post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Crystal Reports 2011 not working in windows 2008 server CITRIX

Hi All,
We are using Crystal reports 2011 in windows 2008 server which is CITRIX farm., having crystal reports 2011 runtime in it..
We are using .net applicationton to run the reports.
The crystal reports parameter popup is getting opened. But the calendar icon is not fuctioning ..clicking on the calendar control no pop up appears. no error too..
OK button is not responding. Cancel button too.
Can you please help us why we are facing this issue in CITRIX only. When we are using the same version in desktop, Crystal report is working fine.
Please feel free to ask if required any more details about my problem.
Regards,
Venkat.K

Ido's idea is excellent, only addition I'd like to make is the following:
You are trying to run a .NET app. However, CR 2011 does not install any SDKs. So, the directory specified by Ido is not correct. Assuming that by CR 2011 you actually mean "SAP Crystal Reports, Developer Version for Visual Studio .NET", then the directory would be:
C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\Crystal Reports 2011\crystalreportviewers\prompting
If that does not help, use Process Monitor and see what the logs tell you (look for Access Denied messages).
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Crystal Report Images Not Showing - JSP inside /WEB-INF folder

Hi Experts,
I am using Crystal report for Eclipse and also using Struts2 and tiles framework combination.
The problem is when viewing the report all I've got is red X on all images and the graph image also not showing. This is when I use tiles and my jsp is inside the web-inf folder.
This is my struts link: href="s:url value='/report/reportOpen.action?report=1'
I've checked that the path to the viewer generated HTML is not correct. see code below.
src="../../../crystalreportviewers/js/crviewerinclude.js"
But when I test to access a simple jsp viewer that resides on the web root folder, this works fine but of course this is not what I want to have. I need to have my banner and menus on top of the report page (using tiles)
This is my jsp link: href="s:url value='/ReportViewer.jsp?report=1'
Viewer generated HTML below.
src="crystalreportviewers/js/crviewerinclude.js"
This might be a common problem and that you can share to me your solution.
Note: I removed the script tags because I can't submit this entry.
Thank you in advance,
Regards,
Rulix Batistil
Crystal Report Images Not Showing - JSP inside /WEB-INF folder

Hi Saravana,
After a few experimentation from your idea i was able to figure out the problem and now it is working.
I don't have to copy the folder to where my jsp resides but still maintains it in the root location: web/crystalreportviewers
The changes should always be in web.xml.
1st: change the crystal_image_uri value to ../crystalreportviewers
2nd: change crystal_image_use_relative value to "web"
Change to "web" instead of webapp because that is what I named my web root folder.
<context-param>
          <param-name>crystal_image_uri</param-name>
          <param-value>../crystalreportviewers</param-value>
     </context-param>
     <context-param>
          <param-name>crystal_image_use_relative</param-name>
          <param-value>web</param-value>
     </context-param>
Thank you. You showed me the way on how to solve the 3 day problem.
BTW, my next problem is when clicking on any buttons prev/next/print/export, I got this error HTTP Status 404.
Well, at least for now I can view my initial report. I just need to figure out the next issue and with the help of the great people here in the forum.
Thanks a lot.
Regards,
Rulix
Edited by: Rulix Batistil on Nov 26, 2008 7:27 AM

CRVS2010 Beta - Crystal Report does not work with VS 2010

After having installed vs 2010, as mentioned, I dowloaded crsytal report . But when trying to create a new crystal report object, I have a html page displayed but crystal report does not start. I would like to know how to make crystal report start to create new report ?
Thanks
Patrick
Subject modified as per the sticky post at the top of this forum; [Crystal Reports for Visual Studio 2010 Beta - read before posting|Crystal Reports for Visual Studio 2010 Beta - read before posting;
Thread moved to NET Development - Crystal Reports
Edited by: Ludek Uher on Aug 27, 2010 6:48 AM

My OS is windows XP. Visual studio 2010 Professional version 10.0.30319.1.rtm rel. Visual basic is 01018-532-2002102-70383. dot net framework is 4.0.30319 rtm rel. When I add a new crystal report object to my project a file named CrystalReport1.mht. Its content is :
From: <Saved by Windows Internet Explorer 8>
Subject: Crystal Reports for Visual Studio 2010
Date: Fri, 2 Oct 2009 17:24:34 -0700
MIME-Version: 1.0
Content-Type: multipart/related;
     type="text/html";
     boundary="----=_NextPart_000_0000_01CA4385.35B07AB0"
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.5579
This is a multi-part message in MIME format.
=_NextPart_000_0000_01CA4385.35B07AB0
Content-Type: text/html;
     charset="utf-8"
Content-Transfer-Encoding: quoted-printable
Content-Location: file://C:\_Working\Projects\Cortez\Stub Templates\RTM\EN\CR for VS 2010 HTML\CRforVS2010.html
=EF=BB=BF<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
then followed by characters whch are not readable.
Thank you for your help
Patrick

Crystal Reports are not centered when viewing on Crystal Viewer

Similar Messages

Maybe you are looking for