Crystal Reports Installation Issue (Error 1904/ HRESULT -2147024769)

Hi,
While installing Crystal Reports 2008 -trial version on Windows-xp I am getting the following error:
"Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\ReportSourceBridge.dll failed to register. HRESULT -2147024769. Contact your support personnel."
Integration Kit for SAP has not yet been installed. But Business Objects XI3.1 Client Tools are installed.
Crystal Reports version is 12.0.0.86.
Is it an compatibility issue or other problem? What is the resolution? Are there any Fix Pack available? Any alternative approach that works?
Any suggestions on this are welcome.
Regards,
Amogh

Hello,
Download Crystal Reports 3.1. It should be version 12.1.0.xxx. It may be the order you are installing also, Install CR first and then the other parts.
1904 is a MSIExec error code. Typically it's due to outdated Microsoft installer or permissions and/or network speed or.... Be sure you are logged in as the local PC administrator or have the same rights as. Copy the installer to your local hard drive and run the setup.exe by right clicking on it and selecting Run as Administrator...
Here's a link for the full build of SP1: https://smpdl.sap-ag.de/~sapidp/012002523100006556612009E/cr2008v1win_rf.exe
Thank you
Don

Similar Messages

Crystal report 9 memory error.

we are using crystal report 9 with sybase power builder..... at some client locations we are experiencing the application crash due to memory while opening crystal reports.
the following errors were noticed
1.the instruction at "0x77124804" referenced memory at "0x001b3e60". the memory could not be read.
2.the instruction at "0x7c911daf" referenced memory at "0x00000000". the memory could not be read.
please guide us what is the issue.. do we need any hotfix or service pack for this.
regards

I assume you already tried to reinstall the application and I would recommend to do it one more time, but this time follow the process for so-called manual uninstall
1. Uninstall Crystal reports 9 using add remove programs
2. Save backup -up of the Registry
3. Remove the following registry key (be careful with the registry file):
HKEY_CURRENT_USER\Software\Business Objects\Suite 12.0\Crystal Reports
4. Reinstall Crystal Reports 9
As the next step I would check and disable Data Execution Prevention.
Go to: Start> Right-click My Computer" select Properties> Advanced tab > click Performance settings> Data Execution Prevention tab.
If DEP turned on for all programs, then add Crystal Reports (crw32.exe) to except list.
If DEP is not cause of problems, then I would suggest Process Monitor to locate the reason or at least try to locate it.
You can download Process Monitor utility from the following page:
http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx
The same page will tell you how to use it. I would suggest the following steps:
Close all unnecessary applications/processes
1. Open Crystal Reports
2. Start the Process Monitor, stop capturing events (Cntrl-E), clean the display (Cntrl-X), add the following filter (Cntrl-L) "Process Name is crw32.exe then include", click ok.
3. Start capturing events (Cntrl-E)
4. Immediately click Format menu on Crystal Reports
5. Stop capturing events and save the log file
Now you can look at the log file to see what is going wrong. I would also advice to capture the same log on client machine to compare the sequence of events.
Gracias...!!

Crystal report font issue when rendered as PDF

Hi we are experiencing an issue with custom fonts within Crystal reports. The font is an open type font that does appear to work if the report is viewed as a crystal report, but when it is rendered or scheduled into a PDF instance it fails and gives a Crystal Reports: Print Engine Error when using openDocument and scheduling gives exporter error. Any help or feedback is appreciated

Aaron,
OpenType is not supported for PDF at least in:
Crystal 10
https://service.sap.com/sap/support/notes/1218086
XIR2
https://service.sap.com/sap/support/notes/1219411
The ADAPT indicated has been postponed.
I canu2019t find an official statement for XI 3.1, however, there is a test you can run and itu2019s to delete the Opentype font from the server and use the same font name but TTF instead. At least, this behaviour has been reported here:
https://service.sap.com/sap/support/notes/1303394
Regards,
Julian

Seagate Crystal Reports ActiveX Designer error '80043ac4'

Website slows down when users are running reports. Users start getting errors when running any crystal report. After sometime main page itself stops loading and only static html is visible. Following is one of the errors users see:
Seagate Crystal Reports ActiveX Designer error '80043ac4'
Invalid directory.
/opera_mort2/report/AlwaysRequiredSteps.asp, line 54
Other errors seen on reporting site at that time are
Active Server pages error 'ASP 0115'
Unexpected error
/opera_mort2/report/rpt_level.asp
A trappable error (C00000005) occurred in an external object. The script cannot continue running.
authentication and network errors.
Rebooting the Web Server temporarily fixes the issue however the error recurs again after a day or two. We are seeing this problem in both our PROD and DR server. There was no change done to either of these boxes recently.
Also at this pint IIS was crashing. Microsoft Support analyzed the crash dumps created from IIS and came up with the following:
"All the memory dumps captured showed the same DLL that was accessing corrupted memory. This same DLL would also be the one that had originally written to those addresses. The DLL was craxdrt.dll from Crystal Reports 8.0 ActiveX Designer, which was version 8.0.1.0 from 1/28/2000. This DLL should be updated to see if this issue has already been fixed. Other options are to recycle IIS more frequently and move to a new version of Crystal Reports."
Here is a detailed analysis from Microsoft Support:
The issue appears to be heap corruption. Normally these are difficult to troubleshoot, however, in this case every memory dump that I looked at had the same component involved.
start end module name
42b30000 4307f000 craxdrt (export symbols) craxdrt.dll
Loaded symbol image file: craxdrt.dll
Image path: C:\Program Files\Seagate Software\Report Designer Component\craxdrt.dll
Image name: craxdrt.dll
Timestamp: Fri Jan 28 15:16:46 2000 (3892235E)
CheckSum: 0055446A
ImageSize: 0054F000
File version: 8.0.0.371
Product version: 8.0.1.0
File flags: 22 (Mask 3F) Pre-release Special
File OS: 40004 NT Win32
File type: 2.0 Dll
File date: 00000000.00000000
Translations: 1009.04b0
CompanyName: Seagate Software, Inc.
ProductName: Crystal Reports 8.0 ActiveX Designer.
InternalName: CRAXDRT
OriginalFilename: CRAXDRT.DLL
ProductVersion: 8.0.1.0
FileVersion: 8.0.0.371
PrivateBuild: 8.0.0.371
SpecialBuild: 8.0.0.371
FileDescription: Crystal Reports ActiveX Designer Runtime Support
LegalCopyright: Copyright (c) 1991-1999 Seagate Software, Inc. All rights reserved.
LegalTrademarks: Copyright (c) 1991-1999 Seagate Software, Inc. All rights reserved.
Comments: Crystal Reports for Visual Basic
This component is from the year 2000 and needs to be updated. I searched our old cases and found several where old version of this component caused the same heap corruption.
Please help as this is a production issue. Please let me know if you need any more information.
thanks and regards
sudatta soman

Something must have changed. Were any patches or auto updates done to the OS?
CR 8.0 has been out of the support cycle for some time now.
As Microsoft suggested please log in and download the patches for CR 8.0 from:
https://www.sdn.sap.com/irj/sdn/businessobjects-support
If that does not resolve the issue the only option will be to schedule sn IIS restart each night.

Crystal Reports version 10 error when displaying report

Hello: New member here, been lurking around for a while. A lot of good information here.
I do hope this is the right place to ask this first question. I have a customer that has a Crystal Reports 10 installation and cannot display reports since he upgraded from Crystal report 8 to Crystal reports 10
The error he gets is pop message:
CRAXDT error Occurred on Server Error Number: -2147221005 Error description: 006ASP 0177Server
CreateObject Failed~800401f3
Connection to the database is good we checked with query using SQL.
Let me know what you think I should check next.
I appreciate it.
Thanks
Damon

1212487 - Error: "CRAXDRT Error Occured on Server. Error Number:-2147221005"
Symptom
A report is called through the Active Server Pages (ASP) Report Server to be displayed in the Report Viewer for ActiveX. However, the report is displayed with blank pages and when the viewer is switched to the Report Viewer for HTML the following error is displayed:
"CRAXDRT Error Occurred on Server. Error Number:-2147221005 Error Description: 006ASP 0177 Server.CreateObject Failed~Invalid Class String"
The same ASP application returns the report correctly when it is called from a client computer with the full version of Crystal Report 8 Developer Edition installed.
Resolution
It was found that the file, Emfgen.dll, was not installed and registered on the web server computer during the installation of the Crystal Reports ASP Reports Server. The report could be displayed correctly on the client computer, without Crystal Reports Developer Edition installed, after this file had been installed on the web server computer.
For more information on installing the Crystal Reports web components please search for and download Scr8_WebManualInstall.zip from our website at:

Crystal Report Installation File

Hi All,
My client has SAP B1 2004A PL32 installed and i am looking for a crystal reporter installation file. can any one help me on this please.....
If anyone has this file please help...
Regards
Satish

Dear Chandstish,
Following is the link to download crystal report add-on installation file for B1 as well as crystal report developer (Evaluation).
https://www.sdn.sap.com/irj/scn/downloads?rid=/library/uuid/d0a0c14b-0e20-2b10-939b-e93a19f14c12
Cheers,
Ashish Tambe

Crystal Reports: Print Engine Error when exporting a report

We recently upgraded from Crystal Reports 2008 to BusinessObjects Edge Series X3.1. When exporting a report to an excel data-only format we get "Crystal Reports: Print Engine Error". All other formats work fine. Any help is highly appreciated.
Thanks,
Jaseem

Anyone?

Crystal Report installation error

Hi Team,
I have registered and downloaded sap crystal reports 2013 sp1. My system specifications are mentioned below. While i am trying to install the application i am getting error "Windows version failed" stating " This product needs to be installed on windows 7 sp1 or server 2008 os. Please have a look at the below screen shot and give me proper solution to install the package.
Thanks,
Shanmugha Bharathy G B

What OS are you installing on?
See if this KBA will help (it is for CR 2011, but the steps should apply to CR 2013 also):
1638102 - Crystal Reports 2011 Installation best practices
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Crystal Reports logon issue across firewall - Transport error:communication

Hi,
We are facing an error when we try to logon to the BO server using the crystal reports tool (Crystal Reports Enterprise XI Release 2 ) outside the firewall. The login is working fine when inside the firewall. The BO server is on a unix box within the customer network and we are trying to login from a PC (using Crystal Reports Enterprise XI Release 2) which is outside that network. The following are the errors we get when trying to logon using authentication as "Enterprise" and system name as "fully qualified server name:6400"
1. Without including any IP addresses in the PC host file we get "Transport error:communication failure" on login.
2. When I included the IP and name of the BO server in the PC host file (xx.xx.xx.xx host name) we get an error - "CMS host 'xxxx' address was resolved properly,but cannot be reached to establish a CMS connection.Verify your router/firewall allows communication on port 6400."
(The IP address I include in the PC host file is the actual IP address of the BO server)
3. I know we have natted IP addresses.. and the IP address of the BO server appears to be different when I do a ping to the BO server from outside the customer network i.e from the external PC. When I include the IP address in the host file (which I get from the ping <servername> outside the customer network from my PC) I get "Transport error:communication failure".
The port 6400 has been opened in the firewall. We are able to login to the CMC link and the Info view without any issues.
It will be great to get some advise on this as it has become a high priority issue in our workspace now.
Thanks,
Reeti

Hi All,
I had a breakthrough in logging to BOX1R2 Crystal Reports client outside the firewall. The following was done in our case:
1. Open the port 6400 on the server to allow traffic from outside the firewall.
2. Add the following command at the end in the cmsLAUNCH command line in ccm.config (ours is a BO server on Sun OS)
-port FQDN:6400 -requestport XXXX
The -port parameter was explicitly specified to make CMS explicitly listen on port 6400.
The -requestport parameter was added to configure the server to register a fixed port (which has external access) with the CMS rather than letting it choose a dynamically selected one...so XXXX can be any port which is not allocated to any app and is also open in the firewall)
Thanks,
Reeti

Crystal Reports 2011 INS00140 error

I have been unsuccessful in installing Crystal Reports 2011. After I enter my name, company name, and key, it will pop up with the error after 30 to 45 seconds of waiting. I am uncertain if I have to uninstall Crystal Reports 2008. I have spoken to technical support. They gave me a few things to try however, the end result was the same. They mentioned to go back to the distributor and get another CD Key. I am not certain if that would even matter at this point considering I am not getting that type of error.
PC Spec:
Dell Precision T3500
Windows 7 Enterprise w/SP1
4GB memory
Intel Xeon W3550
Steps taken:
1. Downloaded latest files from SAP (53005711 and 51041020)
2. Made certain I did not have the MS KB2467175 update
3. Installed Visual Studio Pro 2010
Please let me know what else I can do to get this on my system short of reinstalling the OS.

I spoke with Sean Keaney. This is the email I got:
Hello,
Please follow the below steps to install CR 2011.
Symptom
The Product keycode is not valid. INS00140 Error appears in Validation Result window during Crystal Reports 2011 installation
Environment
Crystal Reports 2011 (patch level below SP02)
Reproducing the Issue
1.     Run Crystal Reports 2011 setup.exe
2.     Enter valid keycode when prompted
3.
Cause
This is known issue and fixed in ADAPT01538339.
There is a conflict between keycode validation process and Microsoft Visual C++ Redistributable Patch KB2467175
Resolution
The issue has been resolved in SP02, but as a quick fix uninstall the Microsoft patch, install Crystal Reports 2011 and reinstall the patch.
The link for patch download: http://support.microsoft.com/?kbid=2467175
Update: According to the latest information Microsoft replaced the patch with a newer security update.
If this does not work for your install please contact the team who provided the license key to you so they can check this against their records.
Should you require any further assistance please do not hesitate to contact us.
Kind regards
Sean Keaney
Support Consultant
AGS Primary Support, Customer Interaction Center
SAP Service Marketplace: www.service.sap.com
http://www.sap.com
To get the most from your support, please review the Global Support Customer Interaction Brochure
Your Feedback Counts - Complete our Survey Today!
SAP Service Marketplace Channel: www.youtube.com/sapsmptv
This communication contains information which is confidential and may also be privileged. It is for the exclusive use of the addressee. If you are not the addressee please contact us immediately and also delete the communication from your computer. Steps have been taken to ensure this e-mail is free from computer viruses but the recipient is responsible for ensuring that it is actually virus free before opening it or any attachments. Any views and/or opinions expressed in this e-mail are of the author only and do not represent the views of SAP.
SAP SSC (Ireland) Limited, Registered in Ireland No. 256220. Registered Office: 1012-1014 Kingswood Avenue, Citywest Business Campus, Dublin 24, Ireland

Crystal Report and Log4net error 1.2.10

Hi at all,
I have problem on Crystal Report and log4net.
It happens when I deploy the Web applications on the server.
I'm using Visual studio 2013 update 2, and I'm using log4net 2.0.3 (1.2.13) and I'm using CRforVS2013_13_0_10, the last.
When I deploy my application on the target machine, where I have also installed the runtime 64 bit for Crystal Report, I found this error:
ERROR 2014-07-31 16:26:42,721 1528053ms 8Euro                  - IP:192.168.0.38    - HOST:192.168.0.38 DumpWebRequest                           - ERROR: Exception of type 'System.Web.HttpUnhandledException' was thrown.
Exception StackTrace:   at System.Web.UI.Page.HandleError(Exception e)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequestWithNoAssert(HttpContext context)
at System.Web.UI.Page.ProcessRequest(HttpContext context)
at ASP.pages_reportviewer_aspx.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
ERROR: The type initializer for 'CrystalDecisions.CrystalReports.Engine.ReportDocument' threw an exception.
ERROR: Could not load file or assembly 'log4net, Version=1.2.13.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
Exception StackTrace:   at CrystalDecisions.Shared.SharedUtils..cctor()
ERROR: Could not load file or assembly 'log4net, Version=1.2.10.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
Not able to extract code, error:Value cannot be null.
Parameter name: source
Exception StackTrace:
On my local Visual studio it works, works fine.
But when I'm deploying on Server, 2008 win 64 bit, I found this error.
I've tried everything, I've installed also the runtime 64 bit on the target/server machine.
The problem is that the log4net is not registered in the windows\assembly directory on the target server ? Do I have to use the Gac util to register the log4net dll assembly ?
Please help me, It one day that I'm facing this error, but I'm not able to solve.
Regards
Vittorio

Hi Vittorio
Please enter the search string 'log4net crystal net' into the search box in the top right corner. When the results come up, click on the Support Notes link. That will filter for the KBAs that you want to have a look at.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

SAP tab in Crystal Reports 2013 issue

We are using SAP Crystal Reports 2013 SP3 to build reports on BEX queries (BW 7.2). Creating a report via 'File' --> New connection --> BW MDX driver works fine, I can select bex queries & cubes and see the data. However SAP provided tab 'SAP' does not work as expected. When adding a new bex query using SAP--> Create new report from a query, I can see the list of queries and select one but it does not open and throws the following error -
"An error occurred while generating a new report templete.
No error"
Using the "File" option any change to the .rpt file forces BO admin to update "DB logon" information in CMC (currently i cannot save .rpt file directly on enterprise from Crystal client due to some issue) and we want to avoid this kind of maintainence using SAP authentication provided by using SAP tab, also the Crysal report prompts when run from BI launch pad request for prompt values twice (once for the report and once to pull list of values for each prompt) which can be avoided using SAP tab. I thought access to dev BW server is fine since the "File" tab works fine. Our BASIS team confirmed BOBJ dev servers have access to BW gateway. Am I missing something here, please help me with your experience and ideas to troubleshoot this as the only solution i could google was from a 2012 SAP recommended article to fix reginfo configuration files on SAP server
I reinstalled Crystal Reports client twice to make sure intallation was not the issue.
Thanks
GORO.

Hi Abhilash,
Thanks for your response.
Yes reports are working in CR 2013 designer.
Getting Alignment and long spaces between the paragraphs issues even though report has properly designed on designer.
After exporting to pdf getting above errors...
-Srinivas

Crystal report installation problem in windows azure.

Hi Everyone,
Good day!.
I have purchased standard version of web site in windows azure server,i'm converting existing normal asp.net application into widows azure project as web role project.In my existing project they have used crystal report tool to generate the reports.
The issue has been arrived when i published the project into azure server.When i did some R&D people have suggested some tool to install the tool name called "CRRuntime.MSI".We tried and install this msi file both 64 bit and 32 bit,but the
problem we couldn't even know whether the .MSI file got installed or not.
Still we are having same issues in server.Please give your good ideas to short this issue in server.
I'm using VS 2012
Thanks in advance !
Regards,
Ranjithkumar.

Hi,
Please make sure that you are enabling remote connection to the web role while deploying from visual studio 2012. Then get remote connectivity RDP file for the VM and connect to it. Install your tool manually and check if the problem getting resolved. If
this manual installation works then you can schedule installation as start up task in Azure web role.
[Although I don't know if your tool can be installed automatically by .cmd or .bat or powershell script file]
You can add installations as start up task in Azure Web Role service definition file. Here is the link and sample XML tags-
http://msdn.microsoft.com/en-us/library/gg456327.aspx
<ServiceDefinition name="MyService" xmlns="http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceDefinition">
<WebRole name="WebRole1">
<Startup>
<Task commandLine="Startup.cmd" executionContext="limited" taskType="simple">
</Task>
</Startup>
</WebRole>
</ServiceDefinition>
Mark As Answer if it helps you |
My Blog

Crystal Reports and Java error

Hi all, I'm trying to run a Crystal Reports report from my web application, but is happening a problem and I check all my code, CR installation, windows folder access rights but I didn't find any problem. Anyone can help me.... please!!!!!!
The error message, in java console is:
java.io.FileNotFoundException: http://localhost/viewer9/javaviewer/ReportViewer.jar
     at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
     at sun.plugin.net.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
     at sun.plugin.net.protocol.http.HttpUtils.followRedirects(Unknown Source)
     at sun.plugin.cache.CachedJarLoader.isUpToDate(Unknown Source)
     at sun.plugin.cache.CachedJarLoader.loadFromCache(Unknown Source)
     at sun.plugin.cache.CachedJarLoader.load(Unknown Source)
     at sun.plugin.cache.JarCache.get(Unknown Source)
     at sun.plugin.net.protocol.jar.CachedJarURLConnection.connect(Unknown Source)
     at sun.plugin.net.protocol.jar.CachedJarURLConnection.getJarFile(Unknown Source)
     at sun.misc.URLClassPath$JarLoader.getJarFile(Unknown Source)
     at sun.misc.URLClassPath$JarLoader.<init>(Unknown Source)
     at sun.misc.URLClassPath$3.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.misc.URLClassPath.getLoader(Unknown Source)
     at sun.misc.URLClassPath.getLoader(Unknown Source)
     at sun.misc.URLClassPath.getResource(Unknown Source)
     at java.net.URLClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.net.URLClassLoader.findClass(Unknown Source)
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
load: class com.crystaldecisions.ReportViewer.ReportViewer not found.
java.lang.ClassNotFoundException: com.crystaldecisions.ReportViewer.ReportViewer
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: open HTTP connection failed.
     at sun.applet.AppletClassLoader.getBytes(Unknown Source)
     at sun.applet.AppletClassLoader.access$100(Unknown Source)
     at sun.applet.AppletClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     ... 10 more
Cheers,
Zilmar
Message was edited by:
Zilmar

I don't know anything about Crystal Reports whatsoever, and I couldn't care less frankly. There has been an excess of postings on these forums about this product, whatever it may be.
If Crystal Reports isn't relevant to the problem why was it mentioned? In the title?
And in any case why was it posted in a forum entitled 'Reflections & Reference Objects'?
And your suggestion that it's up to me to do the research is fallacious and indeed ludicrous.
And the error message 'java.io.FileNotFoundException: http://localhost/viewer9/javaviewer/ReportViewer.jar' is entirely self-explanatory.
And it strongly appears to have something to do with the deployment of Crystal Reports.
None of which is a Reflections & Reference Objects problem, or a Java problem, or Sun's problem.

Crystal Report ADO Connection Error

I have a Crystal Reports created against an MS SQL Server DB using an ADO Connection (crdb_ado.dll). I am using a hardcoded user ID and password for logging into SQL Server, everything works fine when I log from Crystal Reports client, I am able to connect to SQL Server and refresh the report.
When I publish to BOE and access from Infoview or CMC I get an error "[Failed to open the connection.
xxxx report Details: [Database Vendor Code: 17 ]]". I use the same account for SQL server under database config for Crystal report within CMC.
Please see release info below:
BOE XI 3.1 FP 3.1 (Windows 2008 server)
Crystal Reports 2008 FP 3.1
I have checked the ADO dll version, size etc. on both client and BOE XI server and it looks the same.
Are there any additional configuration required for this connection to work from BOE XI?
I enabled log on BOE side and could not get anymore information other than the above message. We also tried with the SQL Server SA account to make sure this is not an access issue.
Thanks.

Hi Don,
Please see answers below:
>
> What happens if you set the logon over ride properties for each instance?
>
I select the option "Use same database logon as when report is run" and get the error mentioned in the first message.
> Also need to know what version of SQL Server you are using and if you are using the Native Client or the OLE DB for SQL Server driver?
>
We are using SQL Server 2008. I have tried with the OLEDB for SQL driver and with the Native client. In both the cases I am getting the same error. I also tried to change the OLEDB.sbo file as mentioned in note 1204488.
Thanks.

Crystal Reports Installation Issue (Error 1904/ HRESULT -2147024769)

Similar Messages

Maybe you are looking for