Crystal using parameter from universe

When creating parameter in a Crystal report using a universe the LOV becomes static. This is a weak limitation in the tool. Has anyone found a work around so that the parameter is dynamic as it was intended and the parameter LOV is refreshed each time the report is executed?

Hi Patrick,
Universe-based Crystal reports in BusinessObjects Enterprise XI and XI Release 2 can have dynamic parameters based on Universe list-of-values (LOV) objects. Crystal Reports only refreshes Universe LOV objects when the Universe is changed.
The two new methods for causing a LOV object to be refreshed in Crystal Reports are:
1. Refresh at every use. This simple option ensures the LOV presented to users is always up-to-date when viewing a report object. It doesnu2019t apply to scheduling, so this option doesnu2019t help when viewing instances of scheduled reports.
2. A new BusinessObjects SDK option has been introduced, allowing developers to write scripts or applications to control when LOV objects are updated. Applications can be triggered or scheduled in the BusinessObjects environment in a number of ways. Sample code is provided, showing how a group of reports might be scheduled to be updated.
Refreshing Universe LOV Objects
To ensure the Universe prompt is refreshed before each use, be sure to edit the object properties in the Universe Designer and set the Automatic refresh before use option.
Step:-
Right click the object.
Select the Properties tab.
Enable the Automatic refresh before use option
Crystal Reports will also update cached LOV objects when the report query is edited in the Crystal Reports Universe query panel.
I hope this information helps you.
Regards,
Prashant.

Similar Messages

Regarding Crystal report parameter from and to.

hi.
I am having one requirement ie.
Normally we are giving..i.e
We are using parameter in Sap b1 like Docentry
Based on this one Docentry the data will fetch from the data base and it will shows into the sap crystal reprot
suppose Ex Docentry = 3 then it will show the data.. then
but ring now what i nee dis Docentry from and to
fromdocentry = 1
todocentry = 5
so, 1,2,3,4,5 five documents should be generate one by one in crystal report in single crystal report not 5 pdf files single pdf should have 5 doc entries
Is it possible how can i do it.
how can i do it...

Hi
I think it is not possible from Crystal Report but below discussion indicates it is possible through some Crystal Report SDK tool.
Exporting a Crystal Reports file into multiple PDF's
How to export a crystal report into several pdf files then email them to several email addresses
With Regards
Balaji Sampath

How to use Parameter from file in window env

hi All,
Please tell me the how I can get Parameter from Saved file and can use in other file.
EX:
I want to use Password file for each instance like
ORCL-manager
ORCL_1-tiger
ORCL_2-*****
how to call this file in other file. using pasword for instance
any help would be appereciated.
Regards,

You can use SFTP for this.
This is a way of implementing SFTP in SSIS using standard tasks
http://visakhm.blogspot.in/2012/12/implementing-dynamic-secure-ftp-process.html
also see
http://blog.goanywheremft.com/2011/10/20/sftp-ftps-secure-ftp-transfers/
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Error creating Crystal Report using Stored Proc Universe

Hi,
I have created a stored procedure Universe, using the new feature available in XI R3.
This connects to an Oracle database, executing a PL/SQL procedure returning ref cursor.
I have created a WebI report using this Universe, which works fine and functions as expected.
So there are no problems with either my Oracle stored proc or the Universe.
However, I would like to create a Crystal report (2008) using the same Universe.
I can create the report ok - using the SP Universe.
When I attempt to refresh the data I get an error:
Failed to retrieve data from the database.
Details: ORA-06550: line 1, column 7:
PLS-00103: Encountered the symbol "." when expecting one of the following:
begin case declare etc etc
.................................My Procedure ...................
CREATE OR REPLACE PROCEDURE BIADM.Bo_Test_Report_R
(Deposit_Cursor IN OUT SYS_REFCURSOR)
IS
BEGIN
OPEN Deposit_Cursor FOR
SELECT DISTINCT foracid "A/C"
, acct_name "A/C Name", acct_opn_date "OP/Date", schm_code "SchmCode"
FROM gam@finrpt
WHERE acct_cls_flg ='N'
AND foracid ='2252020145001';
--AND cust_id ='CB2020145'
END Bo_Test_Report_R;
Please Give me solution as early as possible.
Masud Iqubal

Moved to Universe Design forum.

Problem passing parameter to crystal report subreport from *.aspx page

Background:
I am developing a .NET web application using Visual Studio 2005. The code behind is in VB.net. One of my asp.net pages calls a report, which is invoked when the user clicks a Print button. I have developed this report using the Crystal Reports software that is bundled with Visual Studio 2005. I am passing one parameter from the asp.net page (utilizing the VB.net code-behind on the Print button) to the Crystal report. The report consists of a main report and 5 subreports. Both the main report and the subreports use the same parameter. Both the main report and the subreports are bound to stored procedures, each of which require a parameter.
Problem:
For some reason, the parameter is not being passed from the asp.net page to the report. I am receiving the following error: "CrystalDecisions.CrystalReports.Engine.ParameterField.CurrentValueException: Missing Parameter Values." However, when I remove the subreports, the parameter gets passed, and the report is invoked with no problem.
I have read in other forums that there may be an issue with the Crystal Reports software that is causing this problem. I have downloaded and run the suggested hotfix, but the problem remains unresolved. I have tried changing the linking of my main report to the subreport, but that doesn't help either. It is possible that I am doing something wrong with the linking, as this is the first time I have developed a report with Crystal Reports. I need a workaround or definitive solution. Below is the aspx code used to call the report:
Imports System
Imports System.Collections.Specialized
Imports System.Collections.ObjectModel
Imports System.Collections
Imports System.Text
Imports System.Configuration
Imports System.Data.SqlClient
Imports System.Data
Imports System.Data.SqlClient.SqlDataAdapter
Imports System.Web.Configuration
Imports Crystaldecisions.crystalreports.engine
Imports Crystaldecisions.reportsource
Imports Crystaldecisions.shared
Partial Class OACIS_Award_or_Deny_BudgetSummary_PrintRpt
Inherits System.Web.UI.Page
Dim paramFields As ParameterFieldDefinitions
Dim paramField As ParameterFieldDefinition
Dim paramValue As ParameterValues
Dim paramDiscreteValue As New ParameterDiscreteValue
Public Shared idCase, nameRpt As String
Private PrintRpt As ReportDocument
Private Sub Page_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Try
idCase = Request.QueryString("id")
nameRpt = Request.QueryString("prtName")
Dim config As Configuration = WebConfigurationManager.OpenWebConfiguration("~/")
Dim settings As AppSettingsSection = DirectCast(config.GetSection("appSettings"), AppSettingsSection)
Dim file As String = settings.File
Dim dSource, iCatalog, userIs, passUser, appString As String
dSource = Nothing
iCatalog = Nothing
userIs = Nothing
passUser = Nothing
appString = config.ConnectionStrings.ConnectionStrings("OacisConn").ToString()
Dim AppArray() As String = Split(appString, ";")
Dim arrayLgth As Integer = AppArray.Length
Dim i As Integer
For i = 0 To arrayLgth - 1
Dim pairIs() As String = Split(AppArray(i), "=")
Dim firstItem As String = pairIs(0)
Dim secondItem As String = pairIs(1)
If firstItem = "Data Source" Then : dSource = secondItem : End If
If firstItem = "Initial Catalog" Then : iCatalog = secondItem : End If
If firstItem = "UID" Then : userIs = secondItem : End If
If firstItem = "PWD" Then : passUser = secondItem : End If
Next
Dim crReportDocument As ReportDocument
Dim crExportOptions As ExportOptions
Dim crDiskFileDestinationOptions As DiskFileDestinationOptions
Dim crconnectioninfo As ConnectionInfo
Dim crDatabase As Database
Dim crtables As Tables
Dim crtable As Table
Dim crtablelogoninfo As TableLogOnInfo
Dim Fname As String
Dim Prtname As String
Dim FPath As String
Dim crSection As Section
Dim crReportObject As ReportObject
Dim crSubreportObject As SubreportObject
Dim subRepDoc As New ReportDocument
FPath = Server.MapPath("") + "\"
Dim rptIs As String = nameRpt
crReportDocument = New ReportDocument
Prtname = FPath
Prtname = Prtname + rptIs
crReportDocument.Load(Prtname)
Fname = "C:\WINDOWS\TEMP\" & Session.SessionID.ToString & ".pdf"
crconnectioninfo = New ConnectionInfo
crconnectioninfo.ServerName = dSource
crconnectioninfo.DatabaseName = iCatalog
crconnectioninfo.UserID = userIs
crconnectioninfo.Password = passUser
crDatabase = crReportDocument.Database
crtables = crDatabase.Tables
For Each crtable In crtables
Try
crtablelogoninfo = crtable.LogOnInfo
crtablelogoninfo.ConnectionInfo = crconnectioninfo
crtable.ApplyLogOnInfo(crtablelogoninfo)
crtable.SetDataSource(Prtname)
crtablelogoninfo.ConnectionInfo.DatabaseName = iCatalog
crtablelogoninfo.ConnectionInfo.UserID = userIs
crtablelogoninfo.ConnectionInfo.Password = passUser
crtable.ApplyLogOnInfo(crtablelogoninfo)
crtable.Location = iCatalog + ".dbo." + crtable.Name
Catch ex As Exception
Response.Write(ex)
Exit Sub
End Try
Next crtable
For Each crSection In crReportDocument.ReportDefinition.Sections
For Each crReportObject In crSection.ReportObjects
If crReportObject.Kind = ReportObjectKind.SubreportObject Then
crSubreportObject = CType(crReportObject, SubreportObject)
subRepDoc = crSubreportObject.OpenSubreport(crSubreportObject.SubreportName)
For Each crtable In subRepDoc.Database.Tables
Try
crtablelogoninfo = crtable.LogOnInfo
crtablelogoninfo.ConnectionInfo = crconnectioninfo
crtable.ApplyLogOnInfo(crtablelogoninfo)
crtable.SetDataSource(Prtname)
crtablelogoninfo.ConnectionInfo.DatabaseName = iCatalog
crtablelogoninfo.ConnectionInfo.UserID = userIs
crtablelogoninfo.ConnectionInfo.Password = passUser
crtable.ApplyLogOnInfo(crtablelogoninfo)
crtable.Location = iCatalog + ".dbo." + crtable.Name
Catch ex As Exception
End Try
Next
End If
Next
Next
crDiskFileDestinationOptions = New DiskFileDestinationOptions()
crDiskFileDestinationOptions.DiskFileName = Fname
crExportOptions = crReportDocument.ExportOptions
With crExportOptions
.DestinationOptions = crDiskFileDestinationOptions
.ExportDestinationType = ExportDestinationType.DiskFile
.ExportFormatType = ExportFormatType.PortableDocFormat
End With
Dim parIDCase As ParameterValues = New ParameterValues
Dim disIDCase As ParameterDiscreteValue = New ParameterDiscreteValue
disIDCase.Value = idCase
parIDCase.Add(disIDCase)
crReportDocument.DataDefinition.ParameterFields("@ID_CASE_NMBR").ApplyCurrentValues(parIDCase)
crReportDocument.Export()
Response.ClearContent()
Response.ClearHeaders()
Response.ContentType = "application/pdf"
Response.WriteFile(Fname)
Response.Flush()
Response.Close()
System.IO.File.Delete(Fname)
Catch ex As Exception
lblMessage.Visible = True
lblMessage.Text = "Error Load
" & Convert.ToString(ex)
End Try
End Sub
End Class
Your help is greatly appreciated!

Thanks for your help!
I've now gotten past the "missing parameter values" error, and the report renders fine in the report viewer. However, I've encounted another problem. The data in my main report displays correctly, but the data in my subreport does not display. Of course, when I view the report in the designer, both the main report and subreport display correctly. What am I doing wrong? Below is my vb.net code:
        Try
            idCase = Request.QueryString("id")
            nameRpt = Request.QueryString("prtName")
            Dim config As Configuration = WebConfigurationManager.OpenWebConfiguration("~/")
            Dim settings As AppSettingsSection = DirectCast(config.GetSection("appSettings"), AppSettingsSection)
            Dim file As String = settings.File
            Dim dSource, iCatalog, userIs, passUser, appString As String
            dSource = Nothing
            iCatalog = Nothing
            userIs = Nothing
            passUser = Nothing
            appString = config.ConnectionStrings.ConnectionStrings("OacisConn").ToString()
            Dim AppArray() As String = Split(appString, ";")
            Dim arrayLgth As Integer = AppArray.Length
            Dim i As Integer
            For i = 0 To arrayLgth - 1
                Dim pairIs() As String = Split(AppArray(i), "=")
                Dim firstItem As String = pairIs(0)
                Dim secondItem As String = pairIs(1)
                If firstItem = "Data Source" Then : dSource = secondItem : End If
                If firstItem = "Initial Catalog" Then : iCatalog = secondItem : End If
                If firstItem = "UID" Then : userIs = secondItem : End If
                If firstItem = "PWD" Then : passUser = secondItem : End If
            Next
            Dim crReportDocument As ReportDocument
            Dim crExportOptions As ExportOptions
            Dim crDiskFileDestinationOptions As DiskFileDestinationOptions
            Dim crconnectioninfo As ConnectionInfo
            Dim crDatabase As Database
            Dim crtables As Tables
            Dim crtable As Table
            Dim crtablelogoninfo As TableLogOnInfo
            Dim Fname As String
            Dim Prtname As String
            Dim FPath As String
            Dim crSection As Section
            Dim crReportObject As ReportObject
            Dim crSubreportObject As SubreportObject
            Dim subRepDoc As New ReportDocument
            FPath = Server.MapPath("") + "\"
            Dim rptIs As String = nameRpt
            crReportDocument = New ReportDocument
            Prtname = FPath
            Prtname = Prtname + rptIs
            crReportDocument.Load(Prtname)
            Fname = "C:\WINDOWS\TEMP\" & Session.SessionID.ToString & ".pdf"
            crconnectioninfo = New ConnectionInfo
            crconnectioninfo.ServerName = dSource
            crconnectioninfo.DatabaseName = iCatalog
            crconnectioninfo.UserID = userIs
            crconnectioninfo.Password = passUser
            crDatabase = crReportDocument.Database
            crtables = crDatabase.Tables
            For Each crtable In crtables
                Try
                    crtablelogoninfo = crtable.LogOnInfo
                    crtablelogoninfo.ConnectionInfo = crconnectioninfo
                    crtable.ApplyLogOnInfo(crtablelogoninfo)
                    crtable.SetDataSource(Prtname)
                    crtablelogoninfo.ConnectionInfo.DatabaseName = iCatalog
                    crtablelogoninfo.ConnectionInfo.UserID = userIs
                    crtablelogoninfo.ConnectionInfo.Password = passUser
                    crtable.ApplyLogOnInfo(crtablelogoninfo)
                    crtable.Location = iCatalog + ".dbo." + crtable.Name
                Catch ex As Exception
                    Response.Write(ex)
                    Exit Sub
                End Try
            Next crtable
            For Each crSection In crReportDocument.ReportDefinition.Sections
                For Each crReportObject In crSection.ReportObjects
                    If crReportObject.Kind = ReportObjectKind.SubreportObject Then
                        crSubreportObject = CType(crReportObject, SubreportObject)
                        subRepDoc = crSubreportObject.OpenSubreport(crSubreportObject.SubreportName)
                        For Each crtable In subRepDoc.Database.Tables
                            Try
                                crtablelogoninfo = crtable.LogOnInfo
                                crtablelogoninfo.ConnectionInfo = crconnectioninfo
                                crtable.ApplyLogOnInfo(crtablelogoninfo)
                                crtable.SetDataSource(Prtname)
                                crtablelogoninfo.ConnectionInfo.DatabaseName = iCatalog
                                crtablelogoninfo.ConnectionInfo.UserID = userIs
                                crtablelogoninfo.ConnectionInfo.Password = passUser
                                crtable.ApplyLogOnInfo(crtablelogoninfo)
                                crtable.Location = iCatalog + ".dbo." + crtable.Name
                            Catch ex As Exception
                            End Try
                        Next
                    End If
                Next
            Next
            crDiskFileDestinationOptions = New DiskFileDestinationOptions()
            crDiskFileDestinationOptions.DiskFileName = Fname
            crExportOptions = crReportDocument.ExportOptions
            With crExportOptions
                .DestinationOptions = crDiskFileDestinationOptions
                .ExportDestinationType = ExportDestinationType.DiskFile
                .ExportFormatType = ExportFormatType.PortableDocFormat
            End With
            crReportDocument.SetParameterValue("@ID_CASE_NMBR", idCase)
            crReportDocument.SetParameterValue("@ID_CASE_NMBR", idCase, "MemberName")
            crReportDocument.Export()
            Response.ClearContent()
            Response.ClearHeaders()
            Response.ContentType = "application/pdf"
            Response.WriteFile(Fname)
            Response.Flush()
            Response.Close()
            System.IO.File.Delete(Fname)
        Catch ex As Exception
            lblMessage.Visible = True
            lblMessage.Text = "Error Load<br>" & Convert.ToString(ex)
        End Try
Edited by: LaShandra Knox on Sep 17, 2008 7:59 PM

How to pass parameter from 1 stored procedure to another stored procedure inside crystal report

Hi
I have several stored procedure in my Crystal Report. I am wondering if it is possible for me to pass a parameter to one of the stored procedure and to use the result of that stored procedure E.g. CustomerCode. To another 2 stored procedure to generate the report dynamically?
I have 3 stored procedure
The 1st one is used to gather information and process the calculation
another 2 stored procedure is used for generate the graph and both of them required to take 2 parameters. The 1st stored procedure will require 1 parameter (E.G. Reference Code) and will return a set of information including the data that could be use on the other 2 stored procedures.
After I added these 2 stored procedure, it requires me to pass 3 parameters to the report. I would like to know if I could only pass the Reference Code for stored procedure 1 and use it to retrieve the information for the other 2 parameter?
Thanks in advance
Chi

Hi Chi
To pass parameter from 1 stored procedure to another stored procedure, you will have to create sub report. In your case you will have to create 2 sub reports for 2nd and 3rd stored procedure and link those sub reports with the main report using Reference Code field in order to pass the values.
After creating the report when you will refresh the report, it will ask 4 parameters, one parameter for main report, one for the first subreport and two for second subreport to fetch the data correctly.
Regards
Poonam Thorat.

How to get the parameter from Java Script into the Parameter crystal Report

Hi All,
Crystal Report is integrated with Oracle 10g. I created the base SQL query for col1, col2, col3 and col4. Java Script pass parameter value (185) to Col1.
My question is how to create crystal report to make Col1 as parameter and how to get the parameter value 185(Col1) from Java Script. Is there any additional code I need to include in the crystal report?
FYI.
Java script sends the right parameter value.There is no issue in java script.
This is an automatic scheduled process when batch runs, Java script should pass the parameter value and the crystal report should get the value and produce the output report.

Not sure if this is an application question or if you are trying to hook into Crystal Reports parameter UI? If the later then no option other than report design. If an application then I can move this to the Java Forums.
If you are asking how to alter the parameters I suggest you remove the Java reference and post a new question so it's not confusing the issue.
Please clarify?

How to use Results from Another Query for SAP BW universes

Hi Everyone,
I have two SAP BI universes.In my First universe I have Sales Doc no (dimension) and Orderqty (Measure) and in my second universe I have Sales Doc no(Dimension) and BillQty (Measure).
Here in my first dataprovider I have 1200 rows of data and in second dataprovider I have 75,000 rows. The report should fetch only the BillQty details that matches to corresponding Sales doc no in first data provider.
I want to place all these fileds into a single report like as shown.
(Datarpovider1) (Datarpovider1) (Datarpovider2)
*Sales Doc No* Orderqty BillQty
Here I am able to generate single report using merge dimension but it is leading to performance issues. I want to restrict the values at query level by passing the First dataprovider Sales doc no to second Data provider Sales doc number using Results from Anothery Query feature so that It can fetch only the matching records.
I tried it but it was giving the follwing error:
A filter contains a wrong value. You cannot run this query. (Error: WIS 00007)
How Can I get rid of this error. Can we use Results from Anothery Query option for OLAP universe. Are there any limitation on it.
All this I am doing in Webi Rich Client.
Appreciate your help
Thanks &in Advance
Kiran Saka

Hi Kiran,
I think the filter has a wrong operand. For example, a filter with an empty constant, or a filter that deals with numeric values is defined with an alphanumeric value.Check out for this.
Regards,
Neeraj

Can we use Result from another query in Webi using Bex uery universe?

Hi,
Can we use Result from another query filter option in Webi to create a report using a Bex Query universe?
I need to create a report using two universes, one is Bex Query Universe and the other is Orcle universe. I have two queries, one is using Oracle universe; the other using Bex Query universe. I need to pass the Oracle data from the Oracle query to the Bex Query query to get the matched data from SAP Bex query.
I used Result from another query in the query filter panel for the query using Bex query universe. But I got an error saying that 'A filter contains a wrong value. you cannot run this query. (Error: WIS 00007). The data used in the filter on both sides are the same. they are char.
I have tested by using two queries from the same Bex query universe to see if the Result from another query filter option works. And I got the same error.
Has anyone run into the same issue and if this is possible and what should be the solution?
Thanks in advance!
Edited by: BO_Haiyan on Oct 6, 2010 3:47 PM

In that situation:
Create two queries : Oracle and BW query.
@ Report:
As you have to see result set from both the Dataproviders, correct? To achieve thise one must have common dimension objects to merge them at report and use Objects those are coming from both queries to use them in single Table/Report.
Unless you don't use Merge Dimensions, you don't get a chane to use both queries objects in single Table/Report. (It will give tooltip saying: You can't drop here -- Incompatable Objects)
In case, if you don't have common dimensions, change object definitions to Detail objects, for those required.
Hope it helps you.
Thank You!!

Call ITS SAP R3 from CRM WebClient using parameter NOHEADEROKCODE=1

Good day,
I need some help with an issue.
We want to hide the command field in the SAP GUI for HTML using parameter ~noHeaderOkCode.
[http://help.sap.com/erp2005_ehp_04/helpdata/EN/49/f7cf3f06bd3946e10000000a114084/frameset.htm]
But we want to hide it only when we access the R3 transactions from the CRM WebClient, not in the rest of uses of R3 ITS SAP GUI for HTML. The CRM WebClient launchs some transactions of SAP R3 inside its web, and we want users not to call another transactions there by using the command field.
I've been reading about alias and external alias, but not resolved our issue.
I'll appreciate any help.
Best regards,
Martina

Hi Martina,
one option might be to create a ZWEBGUI service for your CRM WebClient. i.e A copy of the WEBGUI service with the parameter ~NOHEADEROKCODE1 set in its parameters section.
You could also then restrict access to the NEW service to your CRM Users.
See the WIKI:
[How to limit access to an ITS service to specific users? |http://wiki.sdn.sap.com/wiki/x/1wCmB ]
Regards,
Oisin

Using queries from another universe in Webi; Functionality currently works in Deski

Post Author: ck1938
CA Forum: WebIntelligence Reporting
I have a report in deski that was built using 2 queries and 2 universes. One query is from a calendar universe since there is no calendar information in the reporting universe. In deski I have the option of selecting the operand Select Query Results (All) and using the calendar universe to build a filter in the reporting uiverse that uses the results found in the calendar query to define a start date in the reporting query. I'm trying to automate the report in Webi but am having issues since the operand is not available. I only have the options for Constant, Values From List, Prompt, and Object. Object will only give me objects in the reporting universe. It apparently can't see the calendar universe query. I've tried writing some sql statements but have had no luck so far. Does anyone have any guidance they can offer.

Post Author: ck1938
CA Forum: WebIntelligence Reporting
You did get me thinking though. I found another reporting universe with a calendar component and the SQL from that universe has pointed me in the right direction here. I just replaced the manually input date in the sql for the query (2008-5-29 00:00:00) with trunc(sysdate) and the report ran without any manual intervention. Thanks for your help.

Search Results web part - Custom Query using "Value with a parameter from URL" inconsistent

I have encountered what I think may be a bug, but I am hoping that there is something that I am missing.
Within my search site, I have created a new search results page where I want to customize the "Search Results" web part query. I can add in any number of property and keyword filters (using the "Build Your Query" dialog) without
issue... until I add a filter that uses the QueryString property (the builder dialog calls this "Value with a parameter from URL").
If I use {QueryString.MyParameterX} for filtering, it works beautifully in the query builder dialog. I see the expected results in the search results preview pane, but as soon as I apply the changes things become inconsistent.
If I close/reopen my browser and navigate to my page at http://myaddress/search/Pages/testresults.aspx?MyParameterX=test I see results. If I then refresh the page, I get a "Nothing here matches your search" message. I can then go to
the same address but change one character to an uppercase character and get results. Refreshing that same page again returns "Nothing here matches your search". I can only get search results one time per uniquely cased URL without having
to close/reopen my browser. This behavior was seen on both Firefox and IE.
Finally, I found that if I instead navigate to http://myaddress/search/testresults?MyParameterX=test, it always returns results. This, unfortunately isn't the best solution for me... but it is a solution.
Any insight that anyone can provide is greatly appreciated! I would really like to be able to depend on this working in all logical cases (especially since the search center of other sites is set using the path all the way down to /Pages).
Thanks!

Hi, have you been able to solve this issue? I'm getting the same issue and I cant solve it (required CU is installed).
Fabio

How to use Oracle refcursor dataset output parameter from SP

Can I request for help on how to use Oracle Output parameter from a stored procedure as a source. I need the output tobe stored in a flat file
Thanks
Abhijit
Message was edited by:
Abhijit77

yes I would like to use it for ODI.. I would like the ouput of the refcursor to be fed to a text file using ODI. How to handle the records returned by the refcursor and map with txt file.

Use exported parameter from message mapping (via UDF) in next mapping prog

Is there any chance to assign an exported parameter from one message mapping to another mapping program within an operation mapping?

Hi,
Try using dynamic configuration
1. Set value in message mapping and
2. Get value in java mapping
Refer this link http://help.sap.com/saphelp_nw04/helpdata/en/43/03612cdecc6e76e10000000a422035/content.htm
Regards
Suraj

How to transfer range parameter from vb when using bapi calling

Hi,everyone.how to transfer range parameter from vb when using BAPI calling?

Did you get the solution to your problem? Can you please share it with me. I have a similar problem. I have a VB program that calls RFC function. It works with a single parameter but not with a range of parameters. If you have the solution, could you please share sample codes with me? Thank you so much.

Crystal using parameter from universe

Similar Messages

Maybe you are looking for