CrystalReportsViewer 2011 rendering errors on drill down.
Hi
I am displaying a report containing several groups inside the CrystalReportViewer (version 2011) in ASP.NET 3.5.
The viewer works fine, however when I try to drill down into a group using the treeview navigator:
- the whole page is redrawn and it appears to move outside the window (i.e. only part of it is visible, the rest of the page is blank)
- the Drill event does not fire on the code behind
This is not the case when drilling down into a group by clicking on it within the report itself.
Any help is much appreciated.
Peter
Edited by: peter__tyler123456 on Nov 21, 2011 5:18 PM
Hi,
Uninstall the crystal component you are refering to as Crystal Reports 2011 runtime.
Install [Crystal Reports for Visual Studio 2010 SP1|http://downloads.businessobjects.com/akdlm/cr4vs2010/CRforVS_13_0_1.exe]on top of Visual Studio 2010.
Open the crystal report in the CR for VS 2010 bundled designer, preview it and see if it works fine.
Then create a sample application and try to view the report.
See if it reproduces the issue.
Thanks,
Bhushan.
Similar Messages
-
OBIEE error on Drill-down : Unable to navigate requested expression
Hi Gurus,
While trying out drill-down, am facing the folllowing error message - State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 14026] Unable to navigate requested expression: XXX Time.YYY Month. Please fix the metadata consistency warnings. (HY000)
I searched for the solution and found that we need to define an aggregated measure of a dimension table. But I dont know how to do it as I have very less hands-on in OBI Admin Tool. Kindly help me by explaining in detail to solve this issue.
Thanks in advance.Hi,
To define an aggregated measure of a dimension table, complete the following steps:
*1.Create a new fact logical table with the physical dimension table as source.*
*2.Include all fields that should be aggregated as a measure of this new fact object.*
*3.Add an aggregation rule to the column*
*4.set the logical level of the other dimensions to the grand total level.*
Below, a sum aggregation rule :
for more info:
i.e:
put the measure indicated by the error message in a fact table object.
To define an aggregated measure of a dimension table, complete the following steps:
a) Create a new fact logical table with the physical dimension table as source.
b) Include all fields that should be aggregated as a measure of this new fact object.
http://gerardnico.com/wiki/dat/obiee/dimension_measure
Thanks
Deva
Edited by: Devarasu on Sep 29, 2011 7:02 PM -
Workspace error when drilling down on Essbase Cube
An Interactive Reporting Service error has occurred.-Failed to acquire requested service.
(2001)
We're trying to create OLAP queries in IR to deploy through workspace. When I drill down on any dimension, after deploying to workspace, I get the generic error above. Has anyone seen this error?I have created one report using Essbase cubes in OBIEE11G and when I am archiving the same report at one local server and unarchiving it at some other server then at the other server I am facing this error.
Any replies will indeed be helpful. -
Error when drill down with essbase hierarchy
Hi ,
I am displaying one bar chart with, one Ragged hierarchy dimension "Region" ( structure : total region - > India , US -> India south , US south -> chennai , California) and "revenue" (measure) .
Sometime's the drill down is happening smoothly (region - > sub region - > city) but sometimes its throwing below error :
Error Codes: OAMP2OPY:QIKSHNQU
DXE compiler error. Coordinate in target list must match to*coordinate in group by list. Source name:*
GroupbyAndCoorTableCompiler::run. XML: <sawxd:expr*xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"**xmlns:sawxd="com.siebel.analytics.web/expressiondxe/v1.1"**xmlns:sawq="com.siebel.analytics.web/querydxe/v1.1"**xsi:type="sawq:groupbyField" refCoorID="5"/>*
FYI , I have a product prompt attached with this graph . i.e , when user selects "total product" and drilling down its
working perfectly but when selects "network products" its throwing the mentioned error .
OBIEE version used : 11.1.1.6.2 (Build 120604.0813 BP1 64-bit)
essbase version used : 11.1.2.1
Thanks
sayakI have created one report using Essbase cubes in OBIEE11G and when I am archiving the same report at one local server and unarchiving it at some other server then at the other server I am facing this error.
Any replies will indeed be helpful. -
Error while Drilling down across sheets
Hi ,
I am using the new BI 7.0 Bex Analyzer as forntend to my BI 7.0.
While navigating in BI Bex Analyzer, when I select the the drill down accross sheet from the context menu of any characteristics, i get an error message as follows.
"*A Critical program error occurred. The program has to be clos. Please refer the trace for furhter inforamtion*."
My SAP GUI version is 7.10 and the patch level 5.0
Can any body suggest some solution on this.
Thanks in advance.
Nilesh LabdeI know it is too late to reply back on this error.
However, the query which you have already saved, You save it with a different technical name & then execute it, it works.
It worked for me.
Thanks,
Pradip. -
Error when Drill down on top level of hierarchy node
Hi Gurus,
The following error occurs when I drill down to a "Actual Line items sub report" using the "top node" of an hierarchy based report .
But, the same drill down works fine when I drill down using the very sub level of the same hierarchy (without any further levels of hierarchies).
System error in program SAPLRRK0 and form NACHLESEN_INIT_NODE-01-
Any help or work around suggestion would be highly appreciated.
Thanks
AjayHi,
Thanks for the start.
But, My Hierarchy is already active.
Any other place to check for? -
Error using drill down function on receiving transaction in GL
"The Receiving Accounting Events function is not available under General Ledger Super User" is received when attempting to drill down on a receiving transaction through GL. I have searched for any missing roles/responsibilities under GL super user and attempted the same process with GL Manager and sysadmin roles without success.
Please see these docs.
GL Drilldown for SLA Transactions for Period End Accrual Error: Receiving Accounting Events Function & FRM-40010 CSTFQRAE [ID 1289612.1]
The Receiving Accounting Events function is not available under the General Ledger Super User responsibility. [ID 1318147.1]
Cannot Drilldown to GL Account Details For Cost Management Source - 'No Available Transaction for this Line' [ID 1316330.1]
Thanks,
Hussein -
INVALID_VARIABLE_VALUES error for drill down/up
Hello ,
I have created a VC model corresponding to a BI query. The query has 3 variables of which one is mandatory the value for which i am hardcoding.In the output table we have a heirarchy variable for
which I wish to use the drill up and drill down features.But after applying these features, and running
the application ,on clicking the drill down/up buttons i get the following error
Nested Exception. Failure to execute native function. Nested Exception. INVALID_VARIABLE_VALUES
The variable format seems to be fine as I have tried it from the BI side and it also generates the output in the VC output table.Following is the webapi used for drill down .
'FILTER_IOBJNM=YGL_ACCNT;FILTER_NODE_IOBJNM=0HIER_NODE;FILTER_VALUE='&#ID[ACC40T]@G_L_Account&';FILTER_COLLAPSE= ;FILTER_IOBJNM=YGL_ACCNT;CMD_1=CMD%3DDRILL_TO_LEVEL%26LEVEL%3D2%26IOBJNM%3DYGL_ACCNT%26DATA_PROVIDER%3DDP;'
Any help would be most appreciated.
BI 7.0,VC 7.0
PS: have already gone through the wiki link for this error
Thank You
RgdsVineeth,
Please see my comments below:
1)The complete web api command is in the above thread, the mandatory variable is the fiscal year.
I don't see where you have defined the fiscal year in the web API command below:
'FILTER_IOBJNM=YGL_ACCNT;FILTER_NODE_IOBJNM=0HIER_NODE;FILTER_VALUE='&#IDACC40T@G_L_Account&';
FILTER_COLLAPSE= ;FILTER_IOBJNM=YGL_ACCNT;
CMD_1=CMD%3DDRILL_TO_LEVEL%26LEVEL%3D2%26IOBJNM%3DYGL_ACCNT%26DATA_PROVIDER%3DDP;'
2)am not too sure about your question.
Is the hierarchy for YGL_ACCNT defined as a text hierarchy or characteristic hierarchy? If it is a characteristic hierarchy, you should specifiy the parameter FILTER_NODE_IOBJNM=YGL_ACCNT instead of FILTER_NODE_IOBJNM=0HIER_NODE.
3)the command is as intended as per the sap documentation
If you are following the SAP documentation, the first occurrence of FILTER_IOBJNM=YGL_ACCNT should be removed as it is already defined after the FILTER_COLLAPSE parameter.
Regards,
Mustafa. -
ORA-01722 Error while drill down
Hi all,
I have one EUL created with the join of two difference views. In order to join this two view, two id is needed to be joined. I have create a item class whereby it has been joins for this two views. Eg. I got view A with id1 & id2 link to view B with id1 & id2 as well. If I drill down from id1 or id2 column, the screen able to open up the new sheet which will show me the details information that I want.
However, if try to drill down from item code then, the scren has prompted me the above error. What's wrong with this code ?
Rgds
LimHi,
Check this note:
794661
or try searching OSS with that error.
Hope this helps.
Regards,
Diego -
Error in Drilled down ALV Report.
Hi all
i am creating a single level drilled down report , in that in the first screen i am displaying the header detials , in the second level i am displaying the item detial of the particular line..
While processing the second level i am getting a dump like
A PERFORM was used to call the routine "USER_COMMAND" of the program
"SAPLSLVC_FULLSCREEN".
This routine contains exactly 1 formal parameters, but the current
call contains 2 actual parameters.
parameters.
here is my code :
FORM USER_COMMAND USING R_UCOMM LIKE SY-UCOMM.
CASE R_UCOMM.
WHEN '&IC1'.
PERFORM BUILD_CATALOG_EKPO.
PERFORM EVENT_EKPO.
PERFORM POPULATE_EVENT_EKPO.
PERFORM DATA_EKPO.
PERFORM BUILD_LIST.
PERFORM DISPLAY_EKPO.
ENDCASE.
ENDFORM.
*& Form BUILD_CATALOG_EKPO
text
--> p1 text
<-- p2 text
FORM BUILD_CATALOG_EKPO .
WA_FIELDCAT-TABNAME = 'ITAB_EKPO'.
WA_FIELDCAT-FIELDNAME = 'EBELN'.
WA_FIELDCAT-SELTEXT_M = 'PO NO.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'ITAB_EKPO'.
WA_FIELDCAT-FIELDNAME = 'EBELP'.
WA_FIELDCAT-SELTEXT_M = 'Item No.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'ITAB_EKPO'.
WA_FIELDCAT-FIELDNAME = 'MATNR'.
WA_FIELDCAT-SELTEXT_M = 'Material NO.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'ITAB_EKPO'.
WA_FIELDCAT-FIELDNAME = 'WERKS'.
WA_FIELDCAT-SELTEXT_M = 'PLANT.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'ITAB_EKPO'.
WA_FIELDCAT-FIELDNAME = 'LGORT'.
WA_FIELDCAT-SELTEXT_M = 'Storage Loc.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'ITAB_EKPO'.
WA_FIELDCAT-FIELDNAME = 'MENGE'.
WA_FIELDCAT-SELTEXT_M = 'Quantity.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'ITAB_EKPO'.
WA_FIELDCAT-FIELDNAME = 'MEINS'.
WA_FIELDCAT-SELTEXT_M = 'UNIT.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM. " BUILD_CATALOG_EKPO
*& Form EVENT_EKPO
text
--> p1 text
<-- p2 text
FORM EVENT_EKPO .
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = V_EVENTS
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " EVENT_EKPO
*& Form POPULATE_EVENT_EKPO
text
--> p1 text
<-- p2 text
FORM POPULATE_EVENT_EKPO .
READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'TOP_OF_PAGE'.
IF SY-SUBRC EQ 0.
WA_EVENT-FORM = 'TOP_OF_PAGE'.
MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME = WA_EVENT-FORM.
ENDIF.
ENDFORM. " POPULATE_EVENT_EKPO
FORM F_TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = IT_LISTHEADER
i_logo =
I_END_OF_LIST_GRID =
ENDFORM.
*& Form DATA_EKPO
text
--> p1 text
<-- p2 text
FORM DATA_EKPO .
DATA:RS_SELFIELD TYPE SLIS_SELFIELD.
READ TABLE ITAB_EKKO INTO WA_EKKO INDEX RS_SELFIELD-TABINDEX.
SELECT EBELN EBELP MATNR WERKS LGORT MENGE MEINS
FROM EKPO
INTO CORRESPONDING FIELDS OF TABLE ITAB_EKPO
WHERE EBELN = WA_EKKO-EBELN.
DATA :ID_ITEM_COLOR.
LOOP AT ITAB_EKPO INTO WA_EKPO.
ID_ITEM_COLOR = ID_ITEM_COLOR + 1.
IF ID_ITEM_COLOR = 8.
ID_ITEM_COLOR = 1.
ENDIF.
CONCATENATE 'C' ID_ITEM_COLOR '10' INTO WA_EKPO-LINE_COLOR_ITEM.
MODIFY ITAB_EKPO FROM WA_EKPO TRANSPORTING LINE_COLOR_ITEM.
ENDLOOP.
ENDFORM. " DATA_EKPO
*& Form DISPLAY_EKPO
text
--> p1 text
<-- p2 text
FORM DISPLAY_EKPO .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = V_REPID
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = 'USER_COMMAND '
I_CALLBACK_TOP_OF_PAGE = 'TOP_OF_PAGE'
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE = I_TITLE_EKPO
I_GRID_SETTINGS =
IS_LAYOUT =
IT_FIELDCAT = I_FIELDCAT[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS = V_EVENTS
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
I_HTML_HEIGHT_TOP =
I_HTML_HEIGHT_END =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = ITAB_EKPO
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " DISPLAY_EKPO
*& Form BUILD_LIST
text
--> p1 text
<-- p2 text
FORM BUILD_LIST .
gd_layout-no_input = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-totals_text = 'Totals'(201).
Set layout field for row attributes(i.e. color)
gd_layout-info_fieldname = ' LINE_COLOR_ITEM'.
ENDFORM. " BUILD_LIST
Arun JosephThe form USER_COMMAND should have 2 changing/actual parameters which is standard.
Ex:
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
ENDFORM. -
Error while drilling down the data from reports
Hi friends,
I have created dimension hierarchies in rpd for drilling down the data.. While i drill down its showing no results at some level when i am clicking on the data.. but when i am clicking on the same levels column header its drilling down properly and i can view the next level for the data item which has shown no results while clicked on it.. Please help me and helps will be appreciated..Hi,
>when i click on 2000 results displaying is no results
but when i click on the header year its showing the results with 3 for 2000.
So you are able to drill when you click on header..Go to column properties and make heading interaction to no interaction under column format,put value interaction to default and try to drill clicking on value.
in RPD i have some derived columns like month .I created month as derived column from date using logical formula and i used this derived columns as the key.. Is it a problem?No I dont think its a problem
Regards,
Srikanth -
Error getting drill information: SELECT SUBSTRING(cast(etxnmistopbr.month_year as char) FROM 1 FOR 11) saw_0, etxnmistopbr.tot_txns saw_1, cast(etxnmistopbr.month_year as date) saw_2 FROM "Dly Channel" WHERE cast(etxnmistopbr.month_year as date) between ('2012-03-31','2012-10-31')
Error Details
Error Codes: YQCO4T56:OPR4ONWY:U9IM8TAC:OI2DL65P
Odbc driver returned an error (SQLExecDirectW).
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 27002] Near <,>: Syntax error [nQSError: 26012] . (HY000)
Please help me y the above error occurs
month_year is stored as datetime in sybase databaseYour logical query is wrong; when you use between operator you need to use AND
SELECT SUBSTRING(cast(etxnmistopbr.month_year as char) FROM 1 FOR 11) saw_0, etxnmistopbr.tot_txns saw_1, cast(etxnmistopbr.month_year as date) saw_2 FROM "Dly Channel" WHERE cast(etxnmistopbr.month_year as date) between ('2012-03-31','2012-10-31')
Or else use IN operator instead of Between
Appreciate if you mark as correct
Edited by: Srini VEERAVALLI on Dec 29, 2012 10:37 AM -
Error in drill down of RRI- Field Symbol not assigned
Dear all,
I am trying to call a SAP transaction on click of the jump target. I have created the jump target in the following way ..let me know if I am wrong ..
Goto RBBS transaction . Specifed the sender report as 0SD_C01/0SD_C01_Q025 (Sales Volume Analysis) and target as r/3 client 210 and specifed the transaction Va01 as target.
But when I executed the report and did a right click ..on the context menu I coudl see the desription of the Jump target I have created and upon clicking I received a error ..field symbol not assigned ..
Can any let me know the cause of the error ..and how to resolve.. do i need to give any extra parameters while creating jump target..
Thanks,
GuptaHello Gayathri,
One you got the dump you can select debugger button in top-left corner screen.
That will take you to the execution snap shot where you can check all the field symbols and find out which one is not
assigned. accordingly you can find out what is missing on input side to avoid this dump.
Hope this helps!
Thanks,
Augustin. -
Reporting Services Error after Interactive sorting and drill down in pps
Hi
i have a report that has a drill down option that shows all workgroups within a specific parent group and an interactive sorting ass well on both columns parent group & workgroup
This is displayed in pps combined with a SharePoint
---the problem is that after sorting the parent group column by name i then press the drill through icon (+) next to it hopping to see all workgroups related to each parent group
- but instead
i receive this Reporting Services Error :
The value for parameter 'SortItem' is not specified. It is either missing from the function call, or it is set to null. (rsMissingParameter) Get
Online Help
If I don't press the sorting and just drill through it works fine. the sorting itself also works fine.
any suggestions ?
Hi Hyaron,
I am unable to reproduce the issue in my test environment. How did you add the drilldown feature? Were you doing that by setting visibility of the column or of the group? Please ensure to add the drilldown functionality by set the visibility of the workgroup
from the Grouping Pane in the Report Designer.
How did you add the Interactive Sorting on the headers of the two columns? Based on the drilldown functionality, the Interactive Sorting on the second column doesn’t work. So, you can move the Interactive Sorting on the second column. When configuring the
Interactive sorting on the first column, you should set the parent group to sort, and sort by the field that the parent group groups by.
Hope this helps.
Regards,
Mike Yin
TechNet Community Support -
Error: "Numeric value entered was too low " -drill down discoverer report
Hi ,
We have created a Discoverer drill down report (drill down to another worksheet). We have two worksheets one for the master and and the other for the detail.The parameters are passed to detail sheet (The link information is set using the Manage links option in the Discoverer plus) from the master. This whole thing works fine in dev instance.
We imported the business area . Deleted the existing file and the opened the new .dis file from local computer and then saved it to db.
Now the master report runs fine and when we click on the drill down link for the detail we get the following error
An error occured while handling the event.See the application log for more details.
- The numerical value entered was too low."
However the link works fine in plus and desktop in the same instance.
Kindly help.
Thanks,
ShobanaI hope you're not using Internet Explorer v7.
It has a specific problem with Disco Viewer, is not certified to work with it, and the error is drilling in Viewer.
The Oracle bug (metalink) is: 5608740
This bug prevents the listing of drill items under the drill icon.
Russ
Maybe you are looking for
-
Progress Bar is not working in Labview 6i
Hi all, i implemented one vi with Progress bar using labiview 6i. i created property node for the progress bar to set the range as 550 using scale >Range>maximum. progress bar is updating well until the value of 220. later the progress bar is starti
-
App to Listen to Iphone (Calls & Music) on my Car stereo/radio
Is there an APP out there that would allow me to listen to my iPhone calls, music podcast etc. in my car my tuning to an unused FM radio frequency?
-
Can you turn off autosave and versions in mountain lion?
Is this possible?
-
I recently upgraded to LR V2 (also use PS CS3) For some reason my exported file sizes have increased immensely Typically I would convert from RAW to TIFF with the following settings: 11" x 17" print size compression: none Adobe RGB1998 16 bit resolut
-
Safari 4.0.3 update
After updating to Safari 4.0.3 it has become useless. Il I click customise toolbars it does not open and the adress field and Google fiels become unresponsive and no text can be introduced First time I open Safari it responds but after introducing an