CS4 Bridge problem

problem just poped up...when I select multiple files (jpegs), when I select print filename and extention...I get no preview and a saved file that will not open...if I dont select print filename and extention it works fine.
My CS4 had always done this perfectly...use constatly for presetations,,,,I installed trial version of CS6 and was performing task there....uninstalled 6 and started having problems......

http://forums.adobe.com/community/bridge/general

Similar Messages

Problem with CS4 Bridge and Camera Raw

I just bought a Canon 5D Mark III and can not open the images in Camera Raw through Bridge. I was told to upgrade the Camera Raw plug in. I have 5.7.0.213 already and that is what I could find to download. Can I upgrade the plug in into CS4 Bridge or how do I make this work.
Please, I need help with this soon.
Thanks, Tom

Isn't there any other option? I don't have a compter that can run CS6 and at the moment, upgrading compters and Photoshop isn't going to happen. All I need is to upgrade the Camera Raw Plug-in. There has to be some sort of work around for this.
Anyone have any ideas?

CS4 Bridge, icon in place of image??

Hi Guys.
I do hope someone out there can help to shed some light on the following problem I am experiencing in CS4 Bridge on my new Mac. The O/S on my Mac is Snow Leopard 10.6.6
My original mac continued to crash and therefore Apple swapped it for a new and up to date model, all the software has been loaded and appears to work ok except that in Bridge when I should see a preview of a Raw image, all I see is the "icon" symbol, a plain piece of paper with a lens aperture in the middle. I have checked all the preference settings with my old Mac and all appears to be ok.
I am currently using Canon 1Ds MK III and 1D MKIV cameras.
Can anyone please tell me how to rectify this matter?
I have been on to the Adobe Tech Support and all they continue to do is pass me from pillar to post. In fact the phone is currently on hold and has been now for in excess of 40mins??? At their cost, it's a ring back!!
Many thanks in anticipation.
John Fairclough
Fotographic Images.

Hi.
Thanks for your reply. In answer to your suggestions/questions, yes if I double click on the icon in bridge (where the image should be) the icon/image opens up correctly in the Raw convertor ready for processing. Your second question, have I downloaded plug-in V5.7 - Yes.
Today I have had three technicians on attempting to help me for approximately one hour each and then a techi teamleader for a further 1.5 hours, still no joy.
Adobe have promised to ring me back tomorrow which some new ideas and hopefully a solution!!!
One step we will be taking is to uninstall and reinstall the software completely.
Any ideas/suggestions welcome.
Cheers
John F

CS4 Bridge crashes system

I am suddenly having a problem with CS4 Bridge causing my computer to crash (blue screen of death) whenever I attempt to use Bridge. I have contacted Adobe through their "support portal" several times over the past week and have receive no assistance whatsoever. I have also called their telephone support three times and was assured that someone would be in touch but have heard nothing. I am one week into this problem and am unable to use CS4 and bridge. I have uninstalled (complete cleansing) and reinstalled CS4 four times and the problem persists.
Any help or suggestions will be greatly appreciated.
Sincerely,
Wil Tifft
www.tifft.com

I've posted the following in other Post for the same problem... hope it helps (no one seem to even mention what i've done so, maybe i'm genius or plain stupid)
Hi!
I hope you've managed to solve the problem. But just in case i'll tell you that i had the same headache and i've solved (or worked around it) by enabling the Software rendering under the Bridge Advanced Preferences Tab.
The thing is that Bridge will work fine until you want to use the magnifying glass on the preview tab (it will ralentize a bit)... But, you can still make your thumbnails on the content tab bigger so you don't have to zoom in all the time except you need to view some tiny details on the file you are looking for.
That worked for me... and i didn't even tried any of the other solutions shown here... i'll hope that in time the nVidia drivers get updated soon and this problem will disappear. Unfortunately, to try and see if it is fixed you'll have to turn off Bridge's software rendering after updating the driver and then take the risk of another sudden reboot.
Cheers!

CS4 Bridge can't see CS3 Photoshop's ACR

Hi all, I have been using CS3 PS + ACR happily for the last year. Yesterday I downloaded the CS4 trial packs for Dreamweaver, Flash, etc, and installed them, along with CS4 Bridge.
CS4 Bridge will send an image to CS3 PS but when I select "Open in Camera Raw" it tells me I have to "launch a qualifying product at least once to include this feature".
Que pasa?
Fortunately, CS3 Bridge is still available, and still has all its cups in the cupboard; but it's rather inconvenient running both.
I would be grateful for any suggestions,
John Ewing

JohnEwing wrote:
I was chary of getting PS CS4 trial because I didn't want to break any CS3 license parameters in the registry if I let the trial period run out.
File associations are no problem, and ACR probably has no issues with Bridge unless they've made major changes to the interface, which I doubt. I think it's more likely to be a simple question of one product seeing the other one's licensing rights in the registry.
There is an Adobe Clean Script which will remove all traces of the trial. CS4 Clean Script.
I really think you'll get in a mess with versions mixed up like that!
There are major changes to Bridge and ACR and I really advise you not to get yourself and the computer in a muddle.

CS4 bridge displays jpegs thumbnails only

CS4 bridge displays jpegs thumbnails only
Can someone who may have seen this problem or experienced a silimilar issue explain what is happening to CS4 bridge. I just installed PC version of CS4 photophop. It appears that in bridge, only jpegs thumnails will display. Tiffs and PSD files only show up as icons. Also the file association menu seems to have disappeared. Now if I log in as administrator , everything works properly. All thumbnails display correctly, assoication menu appears and bridge will update fine. Does anyone have an idea of what is happening here??
Joel F

Did this happen recently, or has it always worked this way? If this is a new occurance some file may be corrupted and your best bet would be to reset Bridge. You can do that by holding down Crtl and starting Bridge. A reset window will appear, choose all 3 options.
One other point. If you are using Vista and an external drive there can be persissoning problems, but this does not seem like it should be one.

How can you save a customized Web Gallery in CS4 Bridge?

While trying out some the Web Galleries in CS4 Bridge, I have customized several using the customizing options. The info I type in is saved automatically but if I change from one gallery to another, all the customized choices for colors, etc., returns to the default version. Surely there is a way to save what I have input? Kind of ridiculous if you have to do this every time you want to make a gallery. Also, seems that some galleries have more customizing options while others leave those options off. Is this just a bad oversight by Adobe? In the HTML web option, anyway to have it list the file number/name below the image?

I was surprised that no one wanted to answer this question.
I waited long enough.
I still don't have this working properly

How do I find images in LR 2.4 (imported from CS4 Bridge) that have color labels already assigned In CS4 Bridge? I have set both Bridge and LR color labels text to match (eg Green for green, etc).

How do you find images in LR 2.4 that have been imported from CS4 Bridge and have been assigned a color label in Bridge? I have set both LR 2.4 and my CS4 Bridge to match the text for each color to be the same (eg. Green for green, etc), and the filter search in LR 2.4 shows that a label has been assigned, but I am unable to identify and locate the specific images in LR 2.4 that have had a color label assigned from CS4 Bridge. I have tried to search via attribute, metadata, text, etc...Is it necessary to re-assign color labels all over again, image by image, in LR 2.4, or is there a way to automatically have the color labels assigned in CS4 Bridge be assigned and searchable to the images after they have been imported into the LR 2.4 catalogue from the Bridge program?

JohnM.
I closed both programs and re-imported photos and re-tried the action of having LR read the XMP metadata from the CS4 files, and it seems to work now just fine...don't know why now and not before, but thanks much. Is there a way to have LR do this automatically upon import of images from CS4? I tried to do this with an import metadata preset, but no luck. It seems as if I can only do this once the images have already been imported into LR, and then to have to have LR read the metadata from the CS4 Bridge files. thanks gain.

How to get CS4 Bridge Photo Gallery into Dreamweaver?

I am a photographer who is new to Dreamweaver. I followed instructions and created a web gallery in Photoshop CS4 bridge. How do I get that into Dreamweaver???????????

Open DW.
Define your site.
Close DW
Put all the stuff that Bridge spews out into site folder - without changing the file structure.
Open DW
The tickiest part to this if you're new to it all, is defining your site. After that, if you don't have a basice grasp of HTML and CSS Dreamweaver might just turn out to be a bit trickier yet.
If you are not so sure about defining your site, Google it. There are tutorials for it everywhere!
Martin

When i open pc an adobe bridge problem denotes purging

when i open computer an adobe bridge problem denotes purging

Are you trying to say that pointing to your computer in Bridge you get an error message telling you that you need to purge the central Cache?
If so, go ahead and purge it.
Your post is not clear at all. Try rephrasing it, please.
Also:
A lot more information about your hardware and software is needed.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CC", but something like CC2014.v.2.2) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
a screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

CS6 Bridge and Mini Bridge problems

Installed CS6 and clicked on Brose in Bridge. I get the rror messare could not complete the Brose in Bridge commmand because Photoshop was unable to find the Java Script plugin. Also when clicking on Brose in Mini Bridge I get the message cannot complete the command because the extension could not be loaded I have uninstalled CS6 and reinstalled it and get the samew message Help please

Thank you very much I will try that
In a message dated 11/24/2014 12:41:45 P.M. Central Standard Time,
[email protected] writes:
CS6 Bridge and Mini Bridge problems
created by Flashy1995_ (https://forums.adobe.com/people/Flashy_1995) in
Photoshop General Discussion - View the full discussion
(https://forums.adobe.com/message/6958475#6958475)

I shoot with a Canon 7D, have Windows 7 installed on my computer, Adobe CS4 (Bridge & Photoshop). I'm trying to open the CR2 files in Bridge to adjust them before I open them up in Photoshop, but it's giving me an error code saying it's the wrong file typ

I shoot with a Canon 7D, have Windows 7 installed on my computer, Adobe CS4 (Bridge & Photoshop). I'm trying to open the CR2 files in Bridge to adjust them before I open them up in Photoshop, but it's giving me an error code saying it's the wrong file type. I downloaded the latest updates for Adobe Raw as well as the DNG converter, however I don't want to have to convert to DNG before opening in Bridge. Please let me know what I can do to open the CR2 files directly in Bridge CS4, thank you!

Make sure you have the right version...
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications

Re-named NEF & jpg files in CS4 Bridge & they turned into "exec" files!?!? SOS

SOS!!! I just re-named NEF & jpg files in CS4 Bridge & they turned into "exec" files (& the WEDDING GIG images disappeared!) HELP PLEASE, anyone who knows the solution. I'm desperate.

God bless you!…I tried it with the 1st 2 files, which were NEFs & it worked. BUT I started with Raw & then shot mostly jpg…cannot "see" anything & am clueless as to which are which / any other ideas?

Auto fill subject with an Email link in CS4 Bridge flash web gallery

Is there a way to autofill the subject line of the email link in the CS4 Bridge flab web galleries? I can do it if I use the html gallery, but I prefer the look of the flash galleries.
If I open the "group.xml" file I see code for me email link, exp.: <contactEmail>maillto:[email protected]</contactEmail>
I tried adding the "?subject=My Subject" like I would on an html file but that didn't work. I was hoping for some suggestions.
Thanks!

I want it to work on the click of a mouse: when I run or test the page the email comes up immediately. Here is what I have so far:
navigateToURL(new URLRequest("mailto:mailto:[email protected]?subject=yoursubject&body=your message"));
/* Mouse Click Event
Clicking on the specified symbol instance executes a function in which you can add your own custom code.
Instructions:
1. Add your custom code on a new line after the line that says "// Start your custom code" below.
The code will execute when the symbol instance is clicked.
button_3.addEventListener(MouseEvent.CLICK, fl_MouseClickHandler_6);
function fl_MouseClickHandler_6(event:MouseEvent):void
     // Start your custom code
     // This example code displays the words "Mouse clicked" in the Output panel.
     trace("Mouse clicked");
     // End your custom code
So how do I get the email to open ONLY when the mouse clicks on the link??
Sue
Susan Blair Cheatham
Su-Jobi Web Design
mailto:[email protected]
Cell: 706 949-6035
Thank you for choosing Su-Jobi Web Design
We appreciate your trust!

Putting a CS4 Bridge gallery INTO an exsisting web page

Is it possible to put a web gallery created in CS4 Bridge into an exsisting web page created in Dreamweaver? I have a site with several pages and would like to have one of my pages display the gallery so that it all looks the same. I am sure it would entail editing the html and scripts which I am somewhat familure with. Just wondering if this is possible.

As you say it's probably a matter of getting the html generated by the gallery and insert it into your own pages. I'm not familiar with creating such a gallery, but the technotes do bring up some links that may be helpful (hopefully :-)
http://www.adobe.com/cfusion/search/index.cfm?loc=en_us&term=bridge%20photo%20gallery&cat= support
You may also find this link interesting - lots of choices for galleries and slideshows using the jquery framework:
http://www.1stwebdesigner.com/resources/57-free-image-gallery-slideshow-and-ligh tbox-solutions/
Nadia
Adobe® Community Expert : Dreamweaver
http://www.perrelink.com.au
Unique CSS Templates | Tutorials | SEO Articles
http://www.DreamweaverResources.com
http://twitter.com/nadiap

CS4 Bridge problem

Similar Messages

Maybe you are looking for