CS5 issues - No Valid HTML Templates are available to complete this operation

Why does test movie open a new window in the IDE instead of compiling?
And when I try Publish Settings I get
'No Valid HTML Templates are available to complete this operation'

It sounds like the user configuration is bad. Please try removing the user configuration folder. Please note that after deleting the user configuration, there are user settings, such as panel position and saved jsapi commands, will be removed or reset so you might want to save the important files you want to reserve in user configuration before removing the user configuration folder.
1. Quit Flash.
2. Delete the following folder:
Win 7 and Vista: HD:\Users\<username>\AppData\Local\Adobe\Flash CS5
Win XP: HD:\Documents and Settings\<username>\Local Settings\Application Data\Adobe\Flash CS5
Mac: HD:/Users/<username>/Library/Application Support/\Adobe\Flash CS5
3. Relaunch Flash and see if it fixes the problem.
Thanks,
San

Similar Messages

Logon rejected for Unable to obtain Terminal Server User Configuration. Error: Not enough resources are available to complete this operation.

Error: Logon rejected for Unable to obtain Terminal Server User Configuration. Error: Not enough resources are available to complete this operation.
The problem is that the SharePoint server will
function just fine for a week or so and then suddenly when a new user tries
to log on they get an error message indicating that not enough resources areavailable to
log them on and also user will to credential prompt while accessing share point site .
Raj

Hi,
According to the error message, please use performance monitor to diagnose if it is a memory-related bottleneck and you can use the counters of the memory part in the article below:
https://technet.microsoft.com/en-us/magazine/2008.08.pulse.aspx
In addition, it may be due to thousands of open connections to the server are in a TIME_WAIT state. You can run "netstat -an" command on the affected server and client. If you see mutiple connections in the TIME_WAIT state, you can follow the article
to increase the number of TCP/IP connections:
https://msdn.microsoft.com/en-us/library/ee377084(v=bts.70).aspx
Furthermore, if you are running windows server 2003, please make sure that you have installed the KB 948496 and stop all services that you don't need.
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Error 0x800706b9 (2147944121) Not enough resources ae available to complete this operation

Every time I try to install my new printer, or when I used my old one, I keep on getting this message. I've tried everything from starting the spooler to editing the registry key but nothing seems to work. It seems to be an internal problem because the two printers I tried both had this issue.
Could someone please help?

Hello Raisinette434,
Welcome to the HP Support Forums!
I understand that you are unable to install software for either a new printer or an old. Judging by the error you have mentioned, "Error 0x800706b9 (2147944121) Not enough resources are available to complete this operation", my first thought is that there is not enough memory on the computer to met the minimum requirements.
What is the model of printer? Also, the error seems to be one from a Windows Operating System, is this correct? If so, what is the version of Windows, including version, e.g. Windows 7?
Hope to hear back.
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

RDP session to 2012 R2 server comes up with "Not enough storage is available to complete this operation"

I've just set up two new servers in identical fashion which will be hyper-v hosts.
They both have Windows Server 2012 R2 Datacentre installed. 128GB of RAM and c:247GB free, d: 1.9TB free. Resources are not an issue.
Only role installed is Hyper-V on both.
I can RDP to one server without a problem but the other is complaining with the message above. The only option is to click OK and this exits the session. I can log in fine through the Drac card of the server.
I get terminalservices events 261, 1149, 40.
At this time I also get Desktop Window Manager event 9009 - The Desktop Window Manager exited with code (0xd00002fe).
The other strange issue which may or may not be relevant is when I enter task manager on the affected server, the User details tab has lots of entries (approx. 60) with no names and 0% CPU/Memory. This looks odd to me.
Any help gratefully received as I don't want to rebuild from scratch if it is a basic tweak setting somewhere.

Hi Sir,
What I understood from this error was thata RESTRICTED amount of MEMORY allocated for particular type of OS RESOURCE,
has got EXHAUSTED.<o:p></o:p>
<o:p> </o:p>
In both the cases above,
the resource type that was getting exhausted or causing other resources to be exhausted was a HANDLE. A Handle is an OS object used to get a reference of another object (like File, registry,
port etc.). It’s using these handles that a process will work with open files, read registry keys or work with a network port.<o:p></o:p>
<o:p> </o:p>
In both the above scenarios,
we saw a process (Non-Microsoft) consuming large amount of Handles. You can view the handles owned by different processes through
"Task Manager" in Windows. In the "Task Manager", under the Process tab you can add an additional column to display Handles information.
http://blogs.technet.com/b/abizerh/archive/2009/07/12/troubleshooting-the-error-not-enough-storage-is-available-to-complete-this-operation.aspx
>>Any help gratefully received as I don't want to rebuild from scratch if it is a basic tweak setting somewhere.
Instead of rebuilding , you may try to perform in-place upgrade .
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

Downloading via XHR and writing large files using WinJS fails with message "Not enough storage is available to complete this operation"

Hello,
I have an issue that some user are experiencing but I can't reproduce it myself on my laptop. What I am trying to do it grab a file (zip file) via XHR. The file can be quite big, like 500Mb. Then, I want to write it on the user's storage.
Here is the code I use:
DownloadOperation.prototype.onXHRResult = function (file, result) {
var status = result.srcElement.status;
if (status == 200) {
var bytes = null;
try{
bytes = new Uint8Array(result.srcElement.response, 0, result.srcElement.response.byteLength);
} catch (e) {
try {
Utils.logError(e);
var message = "Error while extracting the file " + this.fileName + ". Try emptying your windows bin.";
if (e && e.message){
message += " Error message: " + e.message;
var popup = new Windows.UI.Popups.MessageDialog(message);
popup.showAsync();
} catch (e) { }
this.onWriteFileError(e);
return;
Windows.Storage.FileIO.writeBytesAsync(file, bytes).then(
this.onWriteFileComplete.bind(this, file),
this.onWriteFileError.bind(this)
} else if (status > 400) {
this.error(null);
The error happens at this line:
bytes = new Uint8Array(result.srcElement.response, 0, result.srcElement.response.byteLength);
With description "Not enough storage is available to complete this operation". The user has only a C drive with plenty of space available, so I believe the error message given by IE might be a little wrong. Maybe in some situations, Uint8Array
can't handle such large file? The program fails on a "ASUSTek T100TA" but not on my laptop (standard one)
Can somebody help me with that? Is there a better way to write a downloaded binary file to the disk not passing via a Uint8Array?
Thanks a lot,
Fabien

Hi Fabien,
If Uint8Array works fine on the other computer, it should not be the problem of the API, but instead it could be the setting or configuration for IE.
Actually using XHR for 500MB zip file is not suggested, base on the documentation:
How to download a file, XHR wraps an
XMLHttpRequest call in a promise, which is not a good approach for big item download, please use
Background Transfer instead, which is designed to receive big items.
Simply search on the Internet, and looks like the not enough storage error is a potential issue while using XMLHttpRequest:
http://forums.asp.net/p/1985921/5692494.aspx?PRB+XMLHttpRequest+returns+error+Not+enough+storage+is+available+to+complete+this+operation, however I'm not familiar with how to solve the XMLHttpRequest issues.
--James
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Hyper-V - Not enough storage is available to complete this operation

Hi,
I'm running Hyper-V on Windows 8.1.
This is what I've one so far. I installed Hyper-V and everything was working fine (i.e. Hyper-V started and I was able to create a VM).
Then when I created a new VM I ran out of diskspace, and that seems to be where the problem started. I resolved my disk space issue. However when I tried to start the Hyper-V service I'm getting:
error 14: Not enough storage is available to complete this operation.
I tried removing Hyper-V and then reinstall Hyper-V but this still gives the same error. I'm guessing that something got corrupted when I ran out of disk space, however a reinstall should have done the trick.
The event log ( System log) only shows :
The Hyper-V Virtual Machine Management service terminated with the following error:
Not enough storage is available to complete this operation.
Any ideas?

Hi Pieter,
How are things going ?
Could you please have a share with your storage environment and the steps you resolved your disk space issue .
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Not enough storage is available to complete this operation

I have a new computer. Windows 7, i7 processor, SSD with 256 GB, 16 GB RAM, 4K graphics card, But when I try to do Adaptive Wide Angle correction to my photo, I get the error message : Not enough storage is available to complete this operation. I have tried to increased the cache size, I tried to place the cache in different hard drives with 1.5 TB space, I updated my Windows, updated my graphics card driver, updated my PS CS6, still get the same error message. What can I do to make Adaptive Wide Angle work? I have no other software installed in my computer except Windows and Photoshop.

Probably because you don't have enough storage available to complete the operation.
256 GB is a terribly small drive - especially when you are utilising memory/cache intensive operations.

DPM 2012 R2 Agent not rechable : Not enough storage is available to complete this operation (0x8007000E)

Hi,
We have DPM 2012 R2 installed on Windows 2012 R2 and Protecting SQL 2012 with DPM and recovery point created twice per day.
And getting frequently warning and error mails “DPM Agent not Reachable” and "Not enough storage is available to complete this operation (0x8007000E)" in DPM Console.
I know its SQL server and it occupies most of the RAM and CPU, but can I set its frequencly or time interval of DPM Agent perodic check to avoid this mails.

Hi,
Did you try limiting the sql memory to 60% of physical memory ?
Also adjust the paging file to be physical ram * 1.5 + if necessary.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Not enough storage is available to complete this operation -2147024882

I'm trying to read a large table in a large access file (220MB) and I'm getting this error: "Not enough storage is available to complete this operation -2147024882"
I works with smaller access files.
Does anyone have a sollution for this problem?

i didnt think access could handle 3 million rows.
LabVIEW 8.2 - 2014
"Only dead fish swim downstream" - "My life for Kudos!" - "Dumb people repeat old mistakes - smart ones create new ones."
G# - Free award winning reference based OOP for LV

Optimize-volume -retrim gives error Optimize-Volume : Not enough storage is available to complete this operation

We ar e working with a 3par san combined with a hyper-v cluster. I have some virtual machines with direct attached storage. when i issue the command optimize-volume -driveletter x -retrim I Always get an error Not enough storage is avalable to complet this
operation. The command defrag /L gives me an out of memory error. All volumes are over 2 TB

Hi,
Thanks for responding,
We are working with Windows 2012 R2. We are running the optimize-volume cmdlet on the guest system. The guest system is directly attached to the SAN through the virtual fibre channel adapter. Although we have some volumes with less ten 15 % space we
also have tested it with volumes which have more then 25% space. All gave the same error so I'm wondering if it is the amount of memory addressed to the virtual machines what give the problem
The HP 3Par San normaly will do it automaticly but on 1 volume it is not cleaning up after we deleted 2 TB on disk space.

CS5-Bridge -- Not Enough Storage is available to complete this operation

Since installing CS5 (Windows XP sp3, w/ 3gb ram) and trying to use Bridge I get this command after about 10 minutes of use...especially if I try to drag a thumbnail image from the film strip at the bottom of the screen to another folder location. Periodically, Bridge will just freeze up for a minute or so as well before I can do anything. I have TONS of free (and fast) disk space ... so I think this message must be referring to RAM memory.
The only solution is bring up the task manager and close Bridge.... effectively Bridge is quite useless to me when it operates this way. I thought I'd give it a try in CS5 but whatever is behind this seems to have been a problem for a long time.
I do have about 500,000 images for it to work with and figure that must have something to do with it...but apps like Picassa handle that many with no trouble. Any fixes?

There is a forum dedictated to Bridge: http://forums.adobe.com/community/bridge/bridge_windows
Bob

No valid HTML templates error on publish

Hello,
I've been using flash8 on my computer without any problems since I've purchased it, until now. Suddenly I'm getting this error message when trying to publish. (it won't let me get to the publish settings)
"No Valid HTML Templates are available to complete this operation"
I've already reinstalled without any success, and have scoured the internet for a solution. It seems others have had this problem in the past but no one has a logic answer on how to fix this. So I come to you, I know my version is dated and not an actual Adobe product, but it was working fine. What could be causing this sudden problem?
Please help, thanks.

Here's the solutions (thanks to San), just incase anyone else come across this problem. - cheers!
It sounds like the user configuration is bad. Please try removing the user configuration folder. Please note that after deleting the user configuration, there are user settings, such as panel position and saved jsapi commands, will be removed or reset so you might want to save the important files you want to reserve in user configuration before removing the user configuration folder.
1. Quit Flash.
2. Delete the following folder:
Win 7 and Vista: HD:\Users\<username>\AppData\Local\Adobe\Flash CS5
Win XP: HD:\Documents and Settings\<username>\Local Settings\Application Data\Adobe\Flash CS5
Mac: HD:/Users/<username>/Library/Application Support/\Adobe\Flash CS5
3. Relaunch Flash and see if it fixes the problem.
Thanks,
San

No Valid HTML Templates

I have installed CS3 Web Premium on a system running Windows
Vista. When I try to access the publish settings or publish a Flash
project, I get the following error: 'No valid HTML templates are
available to complete this operation'.
I called tech support and they said remove CS3 Web Premium
and then reinstall it. I'm trying to avoid that long process. Has
anyone else experience this problem and found a solution?

I too am having the same problem with the "no valid html
templates" message....I have fully uninstalled Flash CS3 and
reinstalled it and still cannot publish without the above error
message. Also when I try loading a new "slide" or "form" from the
welcome screen I get the following error message:
"The default screen types FORM and SLIDE are missing from the
configuration. Please restore them by reinstalling."
I get this even after a fresh install...I have tried
uninstalling and reinstalling twice now( each time takes over an
hour to complete)
so any help in this matter would be much
appreciated...

[CS3] Publish problem with no valid HTML templates

Hi,
I have a project file which I have publish numerous times
before without problems. It has come to finally publishing it for
the last time and when I go to publish an error messages comes up
saying...
"no valid HTML templates are avaliable to complete this
operation".
I have reinstalled the app again but still getting the
problem.
Any ideas...

I get to the point where you select Publish Settings in the
file menu but then it comes up with the error message...

Insufficient memory was available to complete the operation

Hello,
I am having trouble using the "place" function to drop a JPEG with a size of approximately 7.6MB into Illustrator CS5. I am creating cross-sections for drill hole planning, and I use the images exported from Geosoft's Target as a base. From there I interpret the geology, precious metal occurences, plan drill holes in Illustrator. I am by no means an expert with Creative Suite, but I know enough to get around. My computer has an i7 processor, 8GB RAM, and 750GB of hard drive space. My intentions are not to be rude, but do not waste my time assuming I am a complete idiot (e.g. I rebooted my machine, rebooted the program, checked to make sure I have plenty of space available, etc...). I worked all night last night without issue, and create all of my cross-sections using this method. I typically never get any issues, but this problem has randomly cropped up twice (the last time it eventually stopped). Unfortunately, I do not have time to magically wait for Illustrator to right itself as I need to present to my Sr. VP on Monday.
Cutting to the chase:
I exported a drill hole fence from Target as a JPEG with a file size of 7.6MB. I then opened up my cross-section template (.ai file) in illustrator, went to File|Place| and accessed the file (I also tried to File|Open). Rather than performing the operation I get the error message "Insufficient memory was available to complete this operation". I then restarted my computer, and attempted this again. My CPU usage is fluttering at 3% +/- 2%, and the Physical Memory is at 31% usage. This seems pretty "buggy" to me, but as I said I am a "beginner user" and perform very basic operations in Illustrator. I have looked around the forums and have seen this issue come up several times, sometimes with very complex advice. I have no plug-ins installed, and have not fiddled with any settings.
Thanks ahead of time for any help provided.
Scot

Thank you, Mike! That worked for me. Although it doesn't really answer the question I am not too concerned since 99% of the time I have no problem. I guess that is a follow up to the other suggestions as well. I worked from 5PM to midnight last night, and made several end product cross-sections. Then this morning it just decided that it was going to stop working.
For now I am not going to ask too many questions, and will just avoid directly importing the JPEG's from Target. When I get more time perhaps I will try to actually get to the root of the problem as opposed to using a work around.

CS5 issues - No Valid HTML Templates are available to complete this operation

Similar Messages

Maybe you are looking for