CSS 11051: Sorry Server receives request although the normal server is up
Hello,
my customer has configured a sorry for his server. If the normal server is down the Sorry Server receives the requests. That works fine. But if the normal server comes back the Sorry Server still receives some requests( 2 hours and more). Has anybody an idea what might be the reason for that ?
regards
Dietrich Schleyer
content webserver
add service server12
vip address 10.40.52.20
primarySorryServer server13
protocol tcp
port 80
url "/*"
no persistent
active
service server12
ip address 10.40.52.12
port 80
protocol tcp
keepalive type named applicationwww01
active
service server13
ip address 10.40.52.13
protocol tcp
port 80
keepalive type named applicationwww02
active
keepalive applicationwww01
ip address 10.40.52.12
port 80
type http non-persistent
uri "/test.html"
frequency 10
method get
active
keepalive applicationwww02
ip address 10.40.52.13
port 80
uri "/test.html"
frequency 10
method get
type http non-persistent
active
According to: http://www.cisco.com/warp/public/117/css_sorry_server.html After the CSS 11000 directs requests to a primary sorry server, the switch will continue to use the primary sorry server even when the original server becomes functional. To force the connection back to the original server, you must suspend the primary sorry server or wait until the connection is dropped or times out. When a new session is initiated by the CSS 11000, the connection should go back to the original server.
Similar Messages
-
Seeing this error when retrieving data from a SharePoint list. I have full access to the list. Any help would be appreciated.
DataSource.Error: SharePoint: Request failed: The remote server returned an error: (500) Internal Server Error. (An error occurred while processing this request.)
Details:
https://xyz/_vti_bin/ListData.svc/ListName
I think I figured out how to use Fiddler. Here's the information I captured-
This is a Tunnel. Status: OPEN, Raw Bytes Out: 3,797; In: 7,604
The selected session is a HTTP CONNECT Tunnel. This tunnel enables a client to send raw traffic (e.g. HTTPS-encrypted streams or WebSocket messages) through a HTTP Proxy Server (like Fiddler).
To enable Fiddler's HTTPS-decryption feature and view decrypted traffic, click Tools > Fiddler Options > HTTPS.
Request Count: 1
Bytes Sent: 107 (headers:107; body:0)
Bytes Received: 107 (headers:107; body:0)
Tunnel Sent: 3,797
Tunnel Received: 7,604
ACTUAL PERFORMANCE
ClientConnected: 11:06:11.389
ClientBeginRequest: 11:06:11.395
GotRequestHeaders: 11:06:11.395
ClientDoneRequest: 11:06:11.395
Determine Gateway: 0ms
DNS Lookup: 176ms
TCP/IP Connect: 77ms
HTTPS Handshake: 0ms
ServerConnected: 11:06:11.649
FiddlerBeginRequest: 11:06:11.649
ServerGotRequest: 11:06:11.649
ServerBeginResponse: 00:00:00.000
GotResponseHeaders: 00:00:00.000
ServerDoneResponse: 00:00:00.000
ClientBeginResponse: 11:06:11.649
ClientDoneResponse: 11:06:11.649
Overall Elapsed: 0:00:00.254
-= Fiddler Event Log =-
See http://fiddler2.com/r/?FiddlerLog for details.
10:33:33:8092 Fiddler Running...
10:33:33:8118 Fiddler.Network.AutoProxy> AutoProxy Detection failed.
10:33:33:8118 AutoProxy failed. Disabling for this network.
10:33:33:8118 Windows 8+ AppContainer isolation feature detected.
11:01:21:4125 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:4145 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:4185 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:4258 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:4268 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:4298 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:4398 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:4398 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:4518 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:4518 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:4528 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:4828 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:5789 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:5820 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:5879 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:6179 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:6530 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance
11:01:21:6924 HTTPSLint> Warning: ClientHello record was 382 bytes long. Some servers have problems with ClientHello's greater than 255 bytes. https://github.com/ssllabs/research/wiki/Long-Handshake-Intolerance -
When I connect to the SharePoint site that contains the lists I need to build my query from , Power Query enumerates the list and displays them in the tool. I can click on the system tables and view the records but any table
in the list I created returns this error.
I can connect fine with InfoPath
[DataSource.Error] SharePoint: Request failed: The remote server returned an error: (500) Internal Server Error. (An error occurred while processing this request.)
thank you for your help
Andrew
Hi Andrew. In order for us diagnose this issue, you'll need to capture some network traces using a tool such as Fiddler and share them by sending a Frown.
To capture a trace using Fiddler, start Fiddler, enable the Tools > Fiddler Options > HTTPS > Decrypt HTTPS traffic option, start the capture, reproduce your issue, then stop and save the capture. You can find more information here.
Once you've done that, please send a Frown through the Power Query ribbon and attach the traces.
Thanks,
Ehren -
Excess time taken to schedule requests to the report server
I have a file which contains 10000 requests to be send to the report server. The total time taken by the report client to send the request to the report server is somewhere around 4 - 5 hours. Why does report client take so much time to schedule the request to the report server ????? How can i get around this problem, since the report execution doesn't start till the last request has been send since i am using schedule=<some_delay> and not schedule=NOW.
I have a file which contains 10000 requests to be send to the report server. The total time taken by the report client to send the request to the report server is somewhere around 4 - 5 hours. Why does report client take so much time to schedule the request to the report server ????? How can i get around this problem, since the report execution doesn't start till the last request has been send since i am using schedule=<some_delay> and not schedule=NOW.
-
Failed to send a request to the message server
Please help me with the problem as below with Basis 6.5 / ECC5 , Windows Server 2003 / Oracle ( 9.2) environment
With Sick it says
Severe problems were detected during initial system check.
Please, do not use that system before fixing these problems.
when I run SM50
error: Update is not active
When I checked SAP MMC, i found Msg_server stopped
I am getting following error log with SM21
04:44:28 DP Q0N Failed to send a request to the message server
04:44:28 DP Q0N Failed to send a request to the message server
04:44:33 DP Q0N Failed to send a request to the message server
04:44:33 DIA 01 020 SAPRFCBWP EK1 Error found in PBT environment, FM = SPBT_INITIALIZE
04:44:33 DIA 01 020 SAPRFCBWP EK4 > Failed to determine server information
04:44:53 DIA 01 020 SAPRFCBWP AB0 Run-time error "MESSAGE_TYPE_X" occurredHi,
Seems to be a problem with your GUI as the dump MESSAGE_TYPE_X is generally related to GUI. Use some higher version of GUI than the existing one.
Also Updates are not active in your system. Use transaction SM13 to check whether updates are active or not. If not then use transaction SM14 to turn on the updates.
Regards
Sourabh Majumdar -
SLD server has stopped; start the SLD server in Administration
I am trying to configure Technical Systems in SLD (for deploying a webdynpro application which has models). Logged in as Administrator. I see this message when I login from the portal (https://host:port/sld):
"SLD server has stopped; start the SLD server in Administration." And all the links are greyed out.
When I log in to the Visual Admin, services->Sld->and tested the connection (with same ID as Administrator), I see "connection test failed CIMClientObject"
What ID, password should I be using for testing the connection for SLD in visual Admin. Or is this related to ID password at all.
Thanks
SrinivasThanks for the replies!
I still have the same problem.
When I select the SLD Data Supplier under services in Visual Admin, I see an error on the task bar at the bottom: SLD_Collector_Task
When I open this item, I see the following error message:
"2008.12.10@10:51:20: HTTP call failed: Failed to send HTTP data: 503 : Service Unavailable. Please check if the target SLD system is available and the SLD bridge is started there"
Is this something related to SLD configuration.
Thanks
Srinivas -
When I try to print an address from Address Book on an envelope, the printer menu shows the menu from IPhoto. All other print requests show the normal pinter menu. How do get the normal print menu?
Mike,
Are any of your other applications going wonky, or is it just Logic?
I'm afraid I've never heard of this particular problem before, but if it were happening to me the first thing I would do is delete my "com.apple.logic.express.plist" file in Library>Preferences, then repair permissions in Disc Utility, and finally restart my computer. Then I would launch Logic and see if the problem has been corrected. It's amazing how much these two steps can accomplish.
If that doesn't resolve the issue I would launch Logic and go to Preferences>Audio Units Manager to see if all my plug-ins are properly validated. -
I would like to setup a new messaging service between my employees because we have issues with most online services. I'm thinking of getting a Mac Mini Server, so I can run Messages Server, but I have an employee outside my network. Can they login to the server remotely to use the Messages Server?
ThanksIf you're talking about setting up and using the Jabber messaging service provided by OS X server then yes, it's really easy to set up and use in and out of the office. The only trick it is, and also most other services, is a correct DNS setup so you're able to connect and use the server from the "outside".
I use this myself (via Lion server rather than Moutain Lion server) from behind a dynamic IP addressed ADSL line and have no problems whatsoever. -
Problem while sending/Receiving request using the HttpURLConnection obj
Hi,
We are facing the problem while passing the request in Weblogic.
Looks like there is some problem with Weblogic while sending/Receiving the request using the HttpURLConnection object.
Currently we are migrating 2 applications to WebLogic. Application1 to application2 request should pass.
Below is some example we tried:
"When we send a request to our code using the SSOAdaptor code (which handles the request/session in our application) which is on the SunOne server the request parameters are received by our code successfully. And also in Create User Functionality of application1 we are sending a request to webpass(which is on Sunone Server) using the HttpURLConnection object and the SOAP request is received successfully by the Webpass."
Looks like when we send request (using HttpURLConnection) from a server other than Weblogic to a servlet in a Weblogic the request parameters are received with out issues.
Where as when the request is sent from WebLogic to WebLogic the request parameters are missing some how.
Is there any issue in Weblogic? Please helpus on this.
Thanks,
Nagesh
Edited by: user9307541 on Mar 15, 2010 5:08 AMHi,
Please find below scenario for testing.
We have tested the SSOAdaptor code (it is the fucntion name which will send the data from source) locally by hittiing the WPS adaptor URL in a Java client program(TestRequest.java) and the request parameters were reaching the WPS Adapter successfully.
Then we have written two test servlets to test the communication between SSOAdaptor(TestServlet.java) and WPS adaptor(WPSServlet.java).
Functionality of TestSevlet: It is sending a request to WPSServelt similar to the way we are doing it in SSOAdaptor.
Functionality of WPSServlet: It will receive the request parameters and write the parameter Map to console.
We have deployed and these two servlets(in a single webapplication) on Tomcat server and the request parameters are reaching the WPSServlet successfully.
Output on Tomcat server:
before sending request
**********************Inside WPS Servlet -- the request Map is:{TypeAcc=[Ljava.lang.String;@14e3f41, ServiceName=[Ljava.lang.String;@1acd47, GMEPortalUserID=[Ljava.lang.String;@19b04e2, UserID=[Ljava.lang.String;@5dcec6, Country=[Ljava.lang.String;@b25b9d}
after sending request
After this we have deployed these two servlets (with in a single webapplication) on the Weblogic server in Dev machine(path: /apps/usmport/domains/usmport/servers/usmport_admin/upload/ssoAdaptor/WEB-INF/classes/com/gm/gmeportal/security/adaptor) and
now the request parameters are not reaching the WPSServlet.
Output on Weblogic Server:
before sending request
**********************Inside WPS Servlet -- the request Map is:{}
after sending request
Looks like there is some problem with Weblogic while sending/Receiving the request using the HttpURLConnection object.
When we send a request to WPSAdaptor using the Old SSOAdaptor code which is on the SunOne server the request parameters are received by WPS successfully. And also in Create User Functionality of Portal we are sending a request to webpass(which is on Sunone Server) using the HttpURLConnection object and the SOAP request is received successfully by the Webpass.
Looks like when we send request (using HttpURLConnection) from a server other than Weblogic to a servlet in a Weblogic the request parameters are received with out issues. Where as when the request is sent from weblogic to weblogic the request parameters are missing some how.
Please find below javs source code used to test this:
TestRequest.java
import java.io.BufferedReader;
import java.io.DataOutputStream;
import java.io.InputStream;
import java.io.InputStreamReader;
import java.io.OutputStream;
import java.net.HttpURLConnection;
import java.net.MalformedURLException;
import java.net.URL;
public class TestRequest {
* @param args
public static void main(String[] args) throws Exception{
// TODO Auto-generated method stub
excutePost("http://localhost:8080/Testing/TestServlet", "GMEPortalUserID=captest.wss@it0555&UserID=bl1133&Country=it&TypeAcc=256&ServiceName=Logon");
//System.out.println("********** Now the request is from SSO *****************");
//excuteGet("http://10.156.0.173:7013/channel21/wpsadapter", "GMEPortalUserID=captest.wss@it0554&UserID=bl1133&Country=it&TypeAcc=256&ServiceName=Logon");
public static String excutePost(String targetURL, String urlParameters)
URL url;
HttpURLConnection connection = null;
try {
//Create connection
url = new URL(targetURL);
connection = (HttpURLConnection)url.openConnection();
connection.setRequestMethod("POST");
connection.setRequestProperty("Content-Type",
"application/x-www-form-urlencoded");
connection.setRequestProperty("Content-Length", "" +
Integer.toString(urlParameters.getBytes().length));
connection.setRequestProperty("Content-Language", "en-US");
connection.setUseCaches (false);
connection.setDoInput(true);
connection.setDoOutput(true);
//Send request
DataOutputStream wr = new DataOutputStream (
connection.getOutputStream ());
wr.writeBytes (urlParameters);
wr.flush ();
wr.close ();
//Get Response
InputStream is = connection.getInputStream();
BufferedReader rd = new BufferedReader(new InputStreamReader(is));
String line;
StringBuffer response = new StringBuffer();
while((line = rd.readLine()) != null) {
response.append(line);
response.append('\r');
rd.close();
System.out.println("Response is:" + response);
return response.toString();
} catch (Exception e) {
e.printStackTrace();
return null;
} finally {
if(connection != null) {
connection.disconnect();
public static String excuteGet(String targetURL, String urlParameters) throws Exception
URL url = new URL(targetURL);
HttpURLConnection httpurlconnection =
(HttpURLConnection) url.openConnection();
/*httpurlconnection.setRequestProperty(
"cookie",
constructRequestParams(httpservletrequest.getCookies()));*/
httpurlconnection.setDoOutput(true);
httpurlconnection.setDoInput(true);
httpurlconnection.setRequestProperty(
"Content-length",
String.valueOf(urlParameters.length()));
OutputStream outputstream = httpurlconnection.getOutputStream();
outputstream.write(urlParameters.getBytes());
outputstream.flush();
//Get Response
try{
InputStream is = httpurlconnection.getInputStream();
BufferedReader rd = new BufferedReader(new InputStreamReader(is));
String line;
StringBuffer response = new StringBuffer();
while((line = rd.readLine()) != null) {
response.append(line);
response.append('\r');
rd.close();
System.out.println("Response from SSO is:" + response);
return response.toString();
} catch (Exception e) {
e.printStackTrace();
return null;
} finally {
if(httpurlconnection != null) {
httpurlconnection.disconnect();
TestServlet.java
import java.io.BufferedReader;
import java.io.IOException;
import java.io.InputStream;
import java.io.InputStreamReader;
import java.io.OutputStream;
import java.net.HttpURLConnection;
import java.net.URL;
import javax.servlet.ServletException;
import javax.servlet.http.HttpServlet;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
* Servlet implementation class TestServlet
public class TestServlet extends HttpServlet {
private static final long serialVersionUID = 1L;
* Default constructor.
public TestServlet() {
// TODO Auto-generated constructor stub
* @see HttpServlet#doGet(HttpServletRequest request, HttpServletResponse response)
protected void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {
// TODO Auto-generated method stub
doPost(request,response);
* @see HttpServlet#doPost(HttpServletRequest request, HttpServletResponse response)
protected void doPost(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {
// TODO Auto-generated method stub
//System.out.println("********************** the request Map is:" + request.getParameterMap());
try {
System.out.println("before sending request");
excuteGet("http://localhost:7003/ssoAdaptor/WPSServlet", "GMEPortalUserID=captest.wss@it0554&UserID=bl1133&Country=it&TypeAcc=256&ServiceName=Logon");
System.out.println("after sending request");
} catch (Exception e) {
// TODO Auto-generated catch block
e.printStackTrace();
public String excuteGet(String targetURL, String urlParameters) throws Exception
URL url = new URL(targetURL);
HttpURLConnection httpurlconnection =
(HttpURLConnection) url.openConnection();
/*httpurlconnection.setRequestProperty(
"cookie",
constructRequestParams(httpservletrequest.getCookies()));*/
httpurlconnection.setDoOutput(true);
httpurlconnection.setDoInput(true);
httpurlconnection.setRequestProperty(
"Content-length",
String.valueOf(urlParameters.length()));
OutputStream outputstream = httpurlconnection.getOutputStream();
outputstream.write(urlParameters.getBytes());
outputstream.flush();
//Get Response
try{
InputStream is = httpurlconnection.getInputStream();
BufferedReader rd = new BufferedReader(new InputStreamReader(is));
String line;
StringBuffer response = new StringBuffer();
while((line = rd.readLine()) != null) {
response.append(line);
response.append('\r');
rd.close();
//System.out.println("Response from SSO is:" + response);
return response.toString();
} catch (Exception e) {
e.printStackTrace();
return null;
} finally {
if(httpurlconnection != null) {
httpurlconnection.disconnect();
WPSServlet.java
import java.io.IOException;
import javax.servlet.ServletException;
import javax.servlet.http.HttpServlet;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
* Servlet implementation class WPSServlet
public class WPSServlet extends HttpServlet {
private static final long serialVersionUID = 1L;
* @see HttpServlet#HttpServlet()
public WPSServlet() {
super();
// TODO Auto-generated constructor stub
* @see HttpServlet#doGet(HttpServletRequest request, HttpServletResponse response)
protected void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {
// TODO Auto-generated method stub
System.out.println("**********************Inside WPS Servlet -- the request Map is:" + request.getParameterMap());
* @see HttpServlet#doPost(HttpServletRequest request, HttpServletResponse response)
protected void doPost(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {
// TODO Auto-generated method stub
doGet(request,response);
Thanks,
Nagesh -
SMTP requests cause the directory server to allocate all processor resource
Using JES 2005Q1.
The problem started when adding mass number of users. When running the commadmin for a long time, the system will hang. We tuned the directory server by increasing the database, initialization and entry cache. I changed many other parameters to tune parameters. It was worthless.
I shifted to ldif and used ldapmodify to create those users.
The users were created successfully. But when the smtp traffic was directed to the server, the nslapd process will allocate 95% of the CPU in 5 minutes.
The problem is in the way the directory server is searched when it accepts an smtp request.
Knowing that the server is currently used only for Messaging Server, any suggestions on how to improve the performance of the directory?
Thanks in advance.The "lookthroughlimit" is set to -1.
I sent from a local user on the server to the same user and the log was this :
"[04/Oct/2005:10:26:02 -0300] conn=1407 op=-1 msgId=-1 - fd=40 slot=40 LDAP connection from 212.98.130.20 to 212.98.130.20
[04/Oct/2005:10:26:02 -0300] conn=1406 op=-1 msgId=-1 - closing - T1
[04/Oct/2005:10:26:02 -0300] conn=1406 op=-1 msgId=-1 - closed.
[04/Oct/2005:10:26:02 -0300] conn=1407 op=0 msgId=1 - BIND dn="uid=msg-admin-marmara.terra.net.lb-20050906144228Z, ou=People, o=terra.net.lb,o=isp" method=128 version=3
[04/Oct/2005:10:26:02 -0300] conn=1407 op=0 msgId=1 - RESULT err=0 tag=97 nentries=0 etime=0 dn="uid=msg-admin-marmara.terra.net.lb-20050906144228z,ou=people,o=terra.net.lb,o=isp"
[04/Oct/2005:10:26:02 -0300] conn=1407 op=1 msgId=2 - SRCH base="o=isp" scope=2 filter="(&(objectClass=sunManagedOrganization)(|(associatedDomain=marmara.terra.net.lb)(sunPreferredDomain=marmara.terra.net.lb)))" attrs=ALL
[04/Oct/2005:10:26:02 -0300] conn=1408 op=-1 msgId=-1 - fd=38 slot=38 LDAP connection from 212.98.130.20 to 212.98.130.20
[04/Oct/2005:10:26:02 -0300] conn=1408 op=0 msgId=141 - BIND dn="cn=Directory Manager" method=128 version=3
[04/Oct/2005:10:26:02 -0300] conn=1408 op=0 msgId=141 - RESULT err=0 tag=97 nentries=0 etime=0 dn="cn=directory manager"
[04/Oct/2005:10:26:02 -0300] conn=1407 op=1 msgId=2 - RESULT err=0 tag=101 nentries=0 etime=0
[04/Oct/2005:10:26:16 -0300] conn=1407 op=2 msgId=3 - SRCH base="o=isp" scope=2 filter="(&(objectClass=sunManagedOrganization)(|(associatedDomain=terra.net.lb)(sunPreferredDomain=terra.net.lb)))" attrs=ALL
[04/Oct/2005:10:26:16 -0300] conn=1407 op=2 msgId=3 - RESULT err=0 tag=101 nentries=1 etime=0
[04/Oct/2005:10:26:16 -0300] conn=1407 op=3 msgId=4 - SRCH base="o=terra.net.lb,o=isp" scope=2 filter="(&(uid=dede1)(objectClass=inetmailuser))" attrs="uid inetUserStatus mailUserStatus mailAllowedServiceAccess inetsubscriberstatus inetauthorizedservices nsmsgDisallowAccess mailAccessDomain mailHost mailMessageStore preferredLanguage mail mailQuota mailMsgQuota aclGroupAddr pabURI maxPabEntries preferredLocale"
[04/Oct/2005:10:26:16 -0300] conn=1407 op=3 msgId=4 - RESULT err=0 tag=101 nentries=1 etime=0
[04/Oct/2005:10:26:16 -0300] conn=1409 op=-1 msgId=-1 - fd=41 slot=41 LDAP connection from 212.98.130.20 to 212.98.130.20
[04/Oct/2005:10:26:16 -0300] conn=1409 op=0 msgId=1 - BIND dn="uid=dede1,ou=People,o=terra.net.lb,o=isp" method=128 version=3
[04/Oct/2005:10:26:16 -0300] conn=1409 op=0 msgId=1 - RESULT err=0 tag=97 nentries=0 etime=0 dn="uid=dede1,ou=people,o=terra.net.lb,o=isp"
[04/Oct/2005:10:26:17 -0300] conn=1407 op=4 msgId=5 - SRCH base="uid=dede1,ou=people,o=terra.net.lb,o=isp" scope=0 filter="(objectClass=*)" attrs="cn cn;lang-en givenName givenName;lang-en mail mailAlternateAddress mailAutoReplyMode mailAutoReplySubject mailAutoReplySubject;lang-en mailAutoReplyText mailAutoReplyText;lang-en mailAutoReplyTextInternal mailAutoReplyTextInternal;lang-en mailAutoReplyTimeout mailDeliveryOption mailForwardingAddress mailQuota mailMsgQuota preferredLanguage sn sn;lang-en uid vacationEndDate vacationStartDate mailHost mailSieveRuleSource sunUCDateFormat sunUCDateDelimiter sunUCTimeFormat nswmExtendedUserPrefs"
[04/Oct/2005:10:26:17 -0300] conn=1407 op=4 msgId=5 - RESULT err=0 tag=101 nentries=1 etime=0
[04/Oct/2005:10:26:18 -0300] conn=1410 op=-1 msgId=-1 - fd=42 slot=42 LDAP connection from 212.98.130.20 to 212.98.130.20
[04/Oct/2005:10:26:18 -0300] conn=1410 op=0 msgId=1 - BIND dn="uid=msg-admin-marmara.terra.net.lb-20050906144228Z, ou=People, o=terra.net.lb,o=isp" method=128 version=3
[04/Oct/2005:10:26:18 -0300] conn=1410 op=0 msgId=1 - RESULT err=0 tag=97 nentries=0 etime=0 dn="uid=msg-admin-marmara.terra.net.lb-20050906144228z,ou=people,o=terra.net.lb,o=isp"
[04/Oct/2005:10:26:18 -0300] conn=1410 op=1 msgId=2 - SRCH base="ou=dede1,ou=people,o=terra.net.lb,o=isp,o=pab" scope=2 filter="(|(cn=*)(ou=*))" attrs=ALL
[04/Oct/2005:10:26:18 -0300] conn=1410 op=1 msgId=2 - RESULT err=0 tag=101 nentries=2 etime=0
[04/Oct/2005:10:26:18 -0300] conn=1410 op=2 msgId=3 - SRCH base="ou=dede1,ou=people,o=terra.net.lb,o=isp,o=pab" scope=2 filter="(|(objectClass=pab)(objectClass=pabgroup))" attrs=ALL
[04/Oct/2005:10:26:18 -0300] conn=1410 op=2 msgId=3 - RESULT err=0 tag=101 nentries=1 etime=0
[04/Oct/2005:10:26:18 -0300] conn=1410 op=3 msgId=4 - SRCH base="ou=dede1,ou=people,o=terra.net.lb,o=isp,o=pab" scope=2 filter="(memberOfPAB=AddressBookabbe53c)" attrs="un cn sn givenName mail description telephoneNumber homePhone memberOfPAB memberOfPABGroup objectClass"
[04/Oct/2005:10:26:18 -0300] conn=1410 op=3 msgId=4 - RESULT err=0 tag=101 nentries=0 etime=0
[04/Oct/2005:10:26:47 -0300] conn=1411 op=-1 msgId=-1 - fd=49 slot=49 LDAP connection from 212.98.130.20 to 212.98.130.20
[04/Oct/2005:10:26:47 -0300] conn=1411 op=0 msgId=1 - BIND dn="uid=msg-admin-marmara.terra.net.lb-20050906144228Z, ou=People, o=terra.net.lb,o=isp" method=128 version=3
[04/Oct/2005:10:26:47 -0300] conn=1411 op=0 msgId=1 - RESULT err=0 tag=97 nentries=0 etime=0 dn="uid=msg-admin-marmara.terra.net.lb-20050906144228z,ou=people,o=terra.net.lb,o=isp"
[04/Oct/2005:10:26:47 -0300] conn=1411 op=1 msgId=2 - SRCH base="o=isp" scope=2 filter="(&(objectClass=sunManagedOrganization)(|(associatedDomain=terra.net.lb)(sunPreferredDomain=terra.net.lb)))" attrs=ALL
[04/Oct/2005:10:26:47 -0300] conn=1411 op=1 msgId=2 - RESULT err=0 tag=101 nentries=1 etime=0
[04/Oct/2005:10:26:47 -0300] conn=1411 op=2 msgId=3 - SRCH base="o=terra.net.lb,o=isp" scope=2 filter="(|([email protected])([email protected])([email protected]))" attrs="preferredLanguage mail mailEquivalentAddress"
[04/Oct/2005:10:26:47 -0300] conn=1411 op=2 msgId=3 - RESULT err=0 tag=101 nentries=1 etime=0
[04/Oct/2005:10:26:47 -0300] conn=1411 op=3 msgId=4 - SRCH base="o=terra.net.lb,o=isp" scope=2 filter="(|([email protected])([email protected])([email protected]))" attrs="objectClass inetUserStatus mailUserStatus inetMailGroupStatus uid preferredLanguage mailRoutingAddress mailDeliveryOption mail mailAlternateAddress mailEquivalentAddress vacationStartDate vacationEndDate mailConversionTag mailMsgMaxBlocks mailHost mailQuota mailMsgQuota mailProgramDeliveryInfo mailDeliveryFileURL maildeliveryfile mailAutoReplyMode mailAutoReplySubject mailAutoReplyText mailAutoReplyTextInternal mailAutoReplyTimeout mailSieveRuleSource mailForwardingAddress mailDeferProcessing mgrpMsgRejectAction mgrprejecttext mgrpMsgRejectText mgrpBroadcasterPolicy mgrpDisallowedBroadcaster mgrpAllowedBroadcaster mgrpDisallowedDomain mgrpAllowedDomain mgrpMsgMaxsize mgrpAuthPassword mgrpModerator mgrpDeliverTo memberURL uniqueMember mgrpRFC822MailMember rfc822mailmember mgrpErrorsTo mgrpAddHeader mgrpRemoveHeader mgrpMsgPrefixText mgrpMsgSuffixText mgmanMemberVisibility expandable"
[04/Oct/2005:10:26:47 -0300] conn=1411 op=3 msgId=4 - RESULT err=0 tag=101 nentries=1 etime=0
[04/Oct/2005:10:26:47 -0300] conn=1411 op=4 msgId=5 - SRCH base="o=isp" scope=2 filter="(&(objectClass=sunManagedOrganization)(|(associatedDomain=ims-ms-daemon)(sunPreferredDomain=ims-ms-daemon)))" attrs=ALL
[04/Oct/2005:10:26:48 -0300] conn=1411 op=4 msgId=5 - RESULT err=0 tag=101 nentries=0 etime=1
[04/Oct/2005:10:26:48 -0300] conn=1412 op=-1 msgId=-1 - fd=50 slot=50 LDAP connection from 212.98.130.20 to 212.98.130.20
[04/Oct/2005:10:26:48 -0300] conn=1412 op=0 msgId=1 - BIND dn="cn=msg-config, cn=Sun ONE Messaging Suite, cn=Server Group, cn=marmara.terra.net.lb, ou=terra.net.lb, o=NetscapeRoot" method=128 version=2
[04/Oct/2005:10:26:48 -0300] conn=1412 op=0 msgId=1 - RESULT err=0 tag=97 nentries=0 etime=0 dn="cn=msg-config,cn=sun one messaging suite,cn=server group,cn=marmara.terra.net.lb,ou=terra.net.lb,o=netscaperoot"
[04/Oct/2005:10:26:48 -0300] conn=1412 op=1 msgId=2 - SRCH base="cn=configuration,cn=msg-config,cn=sun one messaging suite,cn=server group,cn=marmara.terra.net.lb,ou=terra.net.lb,o=netscaperoot" scope=2 filter="(objectClass=*)" attrs=ALL
[04/Oct/2005:10:26:48 -0300] conn=1412 op=1 msgId=2 - RESULT err=0 tag=101 nentries=31 etime=0
[04/Oct/2005:10:32:56 -0300] conn=1418 op=-1 msgId=-1 - fd=40 slot=40 LDAP connection from 212.98.130.20 to 212.98.130.20
[04/Oct/2005:10:32:56 -0300] conn=1415 op=-1 msgId=-1 - closing - T1
[04/Oct/2005:10:32:56 -0300] conn=1415 op=-1 msgId=-1 - closed.
[04/Oct/2005:10:32:56 -0300] conn=1418 op=0 msgId=1 - BIND dn="cn=admin-serv-marmara, cn=Administration Server, cn=Server Group, cn=marmara.terra.net.lb, ou=terra.net.lb, o=NetscapeRoot" method=128 version=3
[04/Oct/2005:10:32:56 -0300] conn=1418 op=0 msgId=1 - RESULT err=0 tag=97 nentries=0 etime=0 dn="cn=admin-serv-marmara,cn=administration server,cn=server group,cn=marmara.terra.net.lb,ou=terra.net.lb,o=netscaperoot"
[04/Oct/2005:10:32:56 -0300] conn=1418 op=1 msgId=2 - BIND dn="cn=Directory Manager" method=128 version=3
[04/Oct/2005:10:32:56 -0300] conn=1418 op=1 msgId=2 - RESULT err=0 tag=97 nentries=0 etime=0 dn="cn=directory manager"
[04/Oct/2005:10:32:56 -0300] conn=1418 op=2 msgId=3 - UNBIND
[04/Oct/2005:10:32:56 -0300] conn=1418 op=2 msgId=-1 - closing - U1
[04/Oct/2005:10:32:56 -0300] conn=1419 op=-1 msgId=-1 - fd=38 slot=38 LDAP connection from 212.98.130.20 to 212.98.130.20
[04/Oct/2005:10:32:56 -0300] conn=1418 op=-1 msgId=-1 - closed.
[04/Oct/2005:10:32:56 -0300] conn=1419 op=0 msgId=1 - BIND dn="cn=Directory Manager" method=128 version=3
[04/Oct/2005:10:32:56 -0300] conn=1419 op=0 msgId=1 - RESULT err=0 tag=97 nentries=0 etime=0 dn="cn=directory manager"
[04/Oct/2005:10:32:56 -0300] conn=1419 op=1 msgId=2 - SRCH base="cn=statusping,cn=operation,cn=tasks,cn=admin-serv-marmara,cn=administration server,cn=server group,cn=marmara.terra.net.lb,ou=terra.net.lb,o=netscaperoot" scope=0 filter="(nsExecRef=*)" attrs="nsExecRef nsLogSuppress"
[04/Oct/2005:10:32:56 -0300] conn=1419 op=1 msgId=2 - RESULT err=0 tag=101 nentries=1 etime=0
[04/Oct/2005:10:32:56 -0300] conn=1419 op=2 msgId=3 - SRCH base="cn=admin-serv-marmara,cn=administration server,cn=server group,cn=marmara.terra.net.lb,ou=terra.net.lb,o=netscaperoot" scope=2 filter="(nsExecRef=*)" attrs="nsExecRef nsLogSuppress"
[04/Oct/2005:10:32:56 -0300] conn=1419 op=2 msgId=3 - RESULT err=0 tag=101 nentries=22 etime=0
[04/Oct/2005:10:32:56 -0300] conn=1419 op=3 msgId=4 - SRCH base="cn=slapd-marmara,cn=sun one directory server,cn=server group,cn=marmara.terra.net.lb,ou=terra.net.lb,o=netscaperoot" scope=2 filter="(nsExecRef=*)" attrs="nsExecRef nsLogSuppress"
[04/Oct/2005:10:32:56 -0300] conn=1419 op=3 msgId=4 - RESULT err=0 tag=101 nentries=9 etime=0
[04/Oct/2005:10:32:56 -0300] conn=1419 op=4 msgId=5 - SRCH base="cn=msg-config,cn=sun one messaging suite,cn=server group,cn=marmara.terra.net.lb,ou=terra.net.lb,o=netscaperoot" scope=2 filter="(nsExecRef=*)" attrs="nsExecRef nsLogSuppress"
[04/Oct/2005:10:32:56 -0300] conn=1419 op=4 msgId=5 - RESULT err=0 tag=101 nentries=16 etime=0
[04/Oct/2005:10:32:56 -0300] conn=1419 op=5 msgId=6 - SRCH base="cn=sun one directory server,cn=server group,cn=marmara.terra.net.lb,ou=terra.net.lb,o=netscaperoot" scope=2 filter="(nsExecRef=*)" attrs="nsExecRef nsLogSuppress"
[04/Oct/2005:10:32:56 -0300] conn=1419 op=5 msgId=6 - RESULT err=0 tag=101 nentries=13 etime=0
[04/Oct/2005:10:32:56 -0300] conn=1419 op=6 msgId=7 - SRCH base="cn=administration server,cn=server group,cn=marmara.terra.net.lb,ou=terra.net.lb,o=netscaperoot" scope=2 filter="(nsExecRef=*)" attrs="nsExecRef nsLogSuppress"
[04/Oct/2005:10:32:56 -0300] conn=1419 op=6 msgId=7 - RESULT err=0 tag=101 nentries=22 etime=0
[04/Oct/2005:10:32:56 -0300] conn=1419 op=7 msgId=8 - SRCH base="cn=sun one messaging suite,cn=server group,cn=marmara.terra.net.lb,ou=terra.net.lb,o=netscaperoot" scope=2 filter="(nsExecRef=*)" attrs="nsExecRef nsLogSuppress"
[04/Oct/2005:10:32:56 -0300] conn=1419 op=7 msgId=8 - RESULT err=0 tag=101 nentries=17 etime=0
[04/Oct/2005:10:32:56 -0300] conn=1419 op=8 msgId=9 - UNBIND
[04/Oct/2005:10:32:56 -0300] conn=1419 op=8 msgId=-1 - closing - U1
[04/Oct/2005:10:32:57 -0300] conn=1419 op=-1 msgId=-1 - closed.
[04/Oct/2005:10:33:02 -0300] conn=1420 op=-1 msgId=-1 - fd=38 slot=38 LDAP connection from 212.98.130.20 to 212.98.130.20
[04/Oct/2005:10:33:02 -0300] conn=1420 op=0 msgId=143 - BIND dn="cn=Directory Manager" method=128 version=3
[04/Oct/2005:10:33:02 -0300] conn=1420 op=0 msgId=143 - RESULT err=0 tag=97 nentries=0 etime=0 dn="cn=directory manager"
[04/Oct/2005:10:35:00 -0300] conn=1421 op=-1 msgId=-1 - fd=40 slot=40 LDAP connection from 212.98.130.20 to 212.98.130.20
[04/Oct/2005:10:35:00 -0300] conn=1420 op=-1 msgId=-1 - closing - T1
[04/Oct/2005:10:35:00 -0300] conn=1420 op=-1 msgId=-1 - closed.
[04/Oct/2005:10:35:00 -0300] conn=1421 op=0 msgId=1 - BIND dn="cn=msg-config, cn=Sun ONE Messaging Suite, cn=Server Group, cn=marmara.terra.net.lb, ou=terra.net.lb, o=NetscapeRoot" method=128 version=2
[04/Oct/2005:10:35:00 -0300] conn=1421 op=0 msgId=1 - RESULT err=0 tag=97 nentries=0 etime=0 dn="cn=msg-config,cn=sun one messaging suite,cn=server group,cn=marmara.terra.net.lb,ou=terra.net.lb,o=netscaperoot"
[04/Oct/2005:10:35:00 -0300] conn=1421 op=1 msgId=2 - SRCH base="cn=configuration,cn=msg-config,cn=sun one messaging suite,cn=server group,cn=marmara.terra.net.lb,ou=terra.net.lb,o=netscaperoot" scope=2 filter="(objectClass=*)" attrs=ALL
[04/Oct/2005:10:35:00 -0300] conn=1421 op=1 msgId=2 - RESULT err=0 tag=101 nentries=31 etime=0
[04/Oct/2005:10:35:00 -0300] conn=1422 op=-1 msgId=-1 - fd=38 slot=38 LDAP connection from 212.98.130.20 to 212.98.130.20
[04/Oct/2005:10:35:00 -0300] conn=1422 op=0 msgId=1 - BIND dn="cn=msg-config, cn=Sun ONE Messaging Suite, cn=Server Group, cn=marmara.terra.net.lb, ou=terra.net.lb, o=NetscapeRoot" method=128 version=2
[04/Oct/2005:10:35:00 -0300] conn=1422 op=0 msgId=1 - RESULT err=0 tag=97 nentries=0 etime=0 dn="cn=msg-config,cn=sun one messaging suite,cn=server group,cn=marmara.terra.net.lb,ou=terra.net.lb,o=netscaperoot"
[04/Oct/2005:10:35:00 -0300] conn=1422 op=1 msgId=2 - SRCH base="cn=configuration,cn=msg-config,cn=sun one messaging suite,cn=server group,cn=marmara.terra.net.lb,ou=terra.net.lb,o=netscaperoot" scope=2 filter="(objectClass=*)" attrs=ALL
[04/Oct/2005:10:35:00 -0300] conn=1422 op=1 msgId=2 - RESULT err=0 tag=101 nentries=31 etime=0
[04/Oct/2005:10:35:00 -0300] conn=1422 op=2 msgId=3 - UNBIND
[04/Oct/2005:10:35:00 -0300] conn=1422 op=2 msgId=-1 - closing - U1
[04/Oct/2005:10:35:00 -0300] conn=1422 op=-1 msgId=-1 - closed.
[04/Oct/2005:10:35:00 -0300] conn=1421 op=-1 msgId=-1 - closing - B1
[04/Oct/2005:10:35:00 -0300] conn=1421 op=-1 msgId=-1 - closed.
[04/Oct/2005:10:35:02 -0300] conn=1423 op=-1 msgId=-1 - fd=38 slot=38 LDAP connection from 212.98.130.20 to 212.98.130.20
[04/Oct/2005:10:35:02 -0300] conn=1423 op=0 msgId=144 - BIND dn="cn=Directory Manager" method=128 version=3
[04/Oct/2005:10:35:02 -0300] conn=1423 op=0 msgId=144 - RESULT err=0 tag=97 nentries=0 etime=0 dn="cn=directory manager"
[04/Oct/2005:10:35:31 -0300] conn=1424 op=-1 msgId=-1 - fd=40 slot=40 LDAP connection from 127.0.0.1 to 127.0.0.1
[04/Oct/2005:10:35:31 -0300] conn=1424 op=0 msgId=1 - BIND dn="cn=Directory Manager" method=128 version=3
[04/Oct/2005:10:35:31 -0300] conn=1424 op=0 msgId=1 - RESULT err=0 tag=97 nentries=0 etime=0 dn="cn=directory manager"
[04/Oct/2005:10:35:31 -0300] conn=1424 op=1 msgId=3 - UNBIND
[04/Oct/2005:10:35:31 -0300] conn=1424 op=1 msgId=-1 - closing - U1
[04/Oct/2005:10:35:31 -0300] conn=1424 op=-1 msgId=-1 - closed.
[04/Oct/2005:10:37:05 -0300] conn=1425 op=-1 msgId=-1 - fd=40 slot=40 LDAP connection from 212.98.130.21 to 212.98.130.20
[04/Oct/2005:10:37:05 -0300] conn=1423 op=-1 msgId=-1 - closing - T1
[04/Oct/2005:10:37:05 -0300] conn=1423 op=-1 msgId=-1 - closed.
[04/Oct/2005:10:37:05 -0300] conn=1425 op=0 msgId=1 - BIND dn="cn=msg-config, cn=Sun ONE Messaging Suite, cn=Server Group, cn=coral.terra.net.lb, ou=terra.net.lb, o=NetscapeRoot" method=128 version=2
[04/Oct/2005:10:37:05 -0300] conn=1425 op=0 msgId=1 - RESULT err=0 tag=97 nentries=0 etime=0 dn="cn=msg-config,cn=sun one messaging suite,cn=server group,cn=coral.terra.net.lb,ou=terra.net.lb,o=netscaperoot"
[04/Oct/2005:10:37:05 -0300] conn=1425 op=1 msgId=2 - SRCH base="cn=configuration,cn=msg-config,cn=sun one messaging suite,cn=server group,cn=coral.terra.net.lb,ou=terra.net.lb,o=netscaperoot" scope=2 filter="(objectClass=*)" attrs=ALL
[04/Oct/2005:10:37:05 -0300] conn=1425 op=1 msgId=2 - RESULT err=0 tag=101 nentries=31 etime=0
[04/Oct/2005:10:37:05 -0300] conn=1426 op=-1 msgId=-1 - fd=38 slot=38 LDAP connection from 212.98.130.21 to 212.98.130.20
[04/Oct/2005:10:37:05 -0300] conn=1426 op=0 msgId=1 - BIND dn="cn=msg-config, cn=Sun ONE Messaging Suite, cn=Server Group, cn=coral.terra.net.lb, ou=terra.net.lb, o=NetscapeRoot" method=128 version=2
[04/Oct/2005:10:37:05 -0300] conn=1426 op=0 msgId=1 - RESULT err=0 tag=97 nentries=0 etime=0 dn="cn=msg-config,cn=sun one messaging suite,cn=server group,cn=coral.terra.net.lb,ou=terra.net.lb,o=netscaperoot"
[04/Oct/2005:10:37:05 -0300] conn=1426 op=1 msgId=2 - SRCH base="cn=configuration,cn=msg-config,cn=sun one messaging suite,cn=server group,cn=coral.terra.net.lb,ou=terra.net.lb,o=netscaperoot" scope=2 filter="(objectClass=*)" attrs=ALL
[04/Oct/2005:10:37:05 -0300] conn=1426 op=1 msgId=2 - RESULT err=0 tag=101 nentries=31 etime=0
[04/Oct/2005:10:37:05 -0300] conn=1426 op=2 msgId=3 - UNBIND
[04/Oct/2005:10:37:05 -0300] conn=1426 op=2 msgId=-1 - closing - U1
[04/Oct/2005:10:37:05 -0300] conn=1426 op=-1 msgId=-1 - closed.
[04/Oct/2005:10:37:05 -0300] conn=1425 op=-1 msgId=-1 - closing - B1
[04/Oct/2005:10:37:05 -0300] conn=1425 op=-1 msgId=-1 - closed.
[04/Oct/2005:10:37:17 -0300] conn=1427 op=-1 msgId=-1 - fd=38 slot=38 LDAP connection from 212.98.130.20 to 212.98.130.20
[04/Oct/2005:10:37:17 -0300] conn=1427 op=0 msgId=145 - BIND dn="cn=Directory Manager" method=128 version=3
[04/Oct/2005:10:37:17 -0300] conn=1427 op=0 msgId=145 - RESULT err=0 tag=97 nentries=0 etime=0 dn="cn=directory manager"
This log was generated when the message was sent and recieved.
Thanks for the help. -
CSS 11500:Client ip-address visible to the real server
Is it possible to keep the original ip-address of the client when the the css is redirecting the traffic to the real server. customer needs the client ip-address on the real server for reporting.
regards
Dietrich SchleyerDietrich,
by default the CSS will keep the original client ip address.
To have the CSS changing the client ip, your customer must have configured a group with 'add destination service'.
Probably because your client is using a one-armed setup which is the easiest to implement but the worst to use.
So, your customer should go to a 2-sides CSS design and have the traffic flow through the CSS without the need to do client nat.
Once the design is correct, you can remove the group and the CSS will keep the client ip address.
Regards,
Gilles.
Thanks for rating. -
DNSreport says it can't connect to my mail server...although the mail works
When I run a test on my virtual domain at www.dnsreport.com I get the following FAILURE:
======
ERROR: I could not complete a connection to any of your mailservers!
mail.thermal3p.com: Timed out [Last data sent: RCPT TO: ]
If this is a timeout problem, note that the DNS report only waits about 40 seconds for responses, so your mail may work fine in this case but you will need to use testing tools specifically designed for such situations to be certain.
======
Mail is being received and sent via the virtualmailhost with only one known problem which is the reason I ran the report - one server keeps bouncing my outbound messages back with this vague error:
<[email protected]>: host
INBOUND.FILTER.THEPLANET.com[216.185.111.115] said: 550 Denied. S1 (in reply to RCPT TO command)
Here is the full report on my virtual domain:
http://www.dnsreport.com/tools/dnsreport.ch?domain=thermal3p.com
It would help if I could just narrow down wether it is a DNS record problem or a server setup problem. To me the server seems to be fine, but I also can't figure out what I've done wrong in the DNS setup. DNS records are hosted at GoDaddy.
THANKS,
KeithYour mail server is answering, but isn't answering
with its MX name in the DNS record:
Can I tell if that is a DNS issue or a Server issue?
It's your choice. Depends on what you want the mail server's name to be. One option would be to change your MX record in your DNS zone file so that the MX host name matches the name announced by your server. Another option would be to change the name announced by your server to match the MX record in your DNS zone file.
Reverse DNS is wrong (some servers won't accept
email from you unless reverse DNS matches the
HELO/EHLO name):
I believe this is why the one server is bouncing me.
The IT told me to check that. Now the problem is
that I don't know how to fix it.
That's why I posted the entire response for your reverse DNS query. Here it is again:
; <<>> DiG 9.3.2 <<>> -x 71.154.29.157 ptr
;; global options: printcmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 5937
;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 2, ADDITIONAL: 0
;; QUESTION SECTION:
;157.29.154.71.in-addr.arpa. IN PTR
;; ANSWER SECTION:
157.29.154.71.in-addr.arpa. 7200 IN PTR adsl-71-154-29-157.dsl.rcsntx.sbcglobal.net.
;; AUTHORITY SECTION:
29.154.71.in-addr.arpa. 172800 IN NS ns1.pbi.net.
29.154.71.in-addr.arpa. 172800 IN NS ns2.pbi.net.</div>
The "Authority" for the 29.154.71.in-addr.arpa. subdomain are the nameservers at pbi.net. The person responsible for that nameserver needs to change the PTR record for 157.29.154.71.in-addr.arpa. from adsl-71-154-29-157.dsl.rcsntx.sbcglobal.net. to the name announced by your server (see above, first get the announced name to match your MX record).
Do you think I should be talking to my service
provider (sbcglobal.net) or the DNS host (godaddy) or
Myself (the hack that is responsible for setting up
the server)?
If you start talking to yourself, people wonder. Your service provider (sbcglobal.net) is the one that has to handle this.
Russ
Xserve G5 2.0 GHz 2 GB RAM Mac OS X (10.4.8) Apple Hardware RAID, ATTO UL4D, Exabyte VXA-2 1x10 1u -
My question is what the steps do I need to take to upgrade SSRS from 2005 SP2 to SP4. The web server that host the SSRS is in 2005 SP2, and the OS is in window 2003.
Our SSRS report server and report server database are in different servers. The SSRS in the web server is in 2005 SP2 enterprise edition, the report server database is in sql server 2005 SP4 enterprise edition.
To upgrade the SSRS in web server from 2005 sp2 to sp4, do I need to backup/restore the encryption key? Nothing will be changed in the report server database. We will still pointing to the same database in the current server, all
I wanted to do is performing a inplace upgrade of SSRS from 2005 SP2 to SP4.
Any response will be greate appreciated. Thank you!
Li-hui ChenHi Lihui Chen,
According to your description, you want to install the Services Pack 4 for SQL Server. Right?
In SQL Server, Services Packs are used for fixing issues of current version product. It's not an Upgrade, you don't have to backup/restore your encryption key. You just need to download the Service Pack 4 on:
Microsoft SQL Server 2005 Service Pack 4 RTM . Please make sure you have administrative rights on the computer to install SQL Server 2005 SP4. For more information, see links below:
How to obtain the latest service pack for SQL Server 2005
List of the issues that are fixed in SQL Server 2005 Service Pack 4
SQL Server 2005 SP4, KBA 2463332, Installation Issues
If you have any question, please feel free to ask.
Best Regards,
Simon Hou -
Integrating Web server (eg Apache) with the application server
I am thinking a project in which I use more static HTML files than JSPs. One way is to use an Apache server to display those HTML files (it should be faster), and deploy the JSPs into the J2EE server; another way is just simple to change the web container�s port to 80 (of the PE 8), and wrap all the files into a war file and deploy it into the application server.
So can someone advise my which way is better? And if I use the first one, I�d like to know if it is the same way to integrate Apache with Tomcat.
Thank you very much!In the past there has been a belief that the Apache web server serves static content faster than tomcat. Site managers would configure apache to deliver static content and integrate a web container to handle the dynamic content. I believe this argument is losing steam as tomcat gets better. I guess the only way you will know for sure is to deploy your application in PE 8.0 and then in an apache/web container configuration and do some benchmarking. I have no such benchmark data to compare and I base my comments on what I have read in newsgroups over the past months. Personally, I would opt for the app server only setup just to ease configuration. Others may have a different opinion.
-
Hi,
a wired glitch in my SSIS 2005 package in production server where the FTP folder location is not showing but its existing in my laptop version
EX: - t01/app/_res folder
When i open the package from the production server "_res" is not showing within the remote path in the file transfer task.
but "_res" folder is shown in my development environment.
I tried with winscp FTP software in the production sever , and was able to access the "_res" location through the FTP software. What could this be? a BIDS sofitware version issue???
VS 2005 Version in development server
-Is 8.0.50727.42(Premier Partner ENU) .net framework is 4.5.1
VS 2005 Version in production server
-Is 8.0.50728 (Premier Partner ENU) .net framework is 2.0 Service pack 2.0
thanks.When you open the package on the production server, do you mean opening it with your Windows account from BIDS on that server? Ff the ftp connection in the package has a password it will have been stored in your laptop when you designed the package. when
you deployed the pacakge on the server as a file and open it with BIDS then the password will be gone. You would have to go into the package ftp connection properties, reassign your password and save the connection and the package again.
Jan D'Hondt - SQL server BI development
Maybe you are looking for
-
I am trying to enable reporting on InfoObjects on my InfoSet in BI 7.0, but whenever I open the InfoSet I cannot check the box next to the InfoObject name because it is grayed out. Can anybody explain how to remedy this? I will award points.
-
Hi all, I have got two applications, a Server (that is connected to Embedded Device sensoring Temperature and Humidity), and a Client that recieves this information. Now the way which I have these applications working is that BOTH have the ability to
-
Serial Numbers with the licence
Hello, I just purchased a licence to use all services from Adobe for students. But when I'm trying to open PhotoShop, Illustrator ans InDesign, it doesn't work and ask me some serial numbers.. But when I'm using it with Adobe Muse, it works very well
-
Hi All, Sorry if i am in wrong thread.Its related to HR so i thought this thread would be the right one. I am Basis Consultant and for the first time i am going to implement HR Module. I need some help or documentation and not only that i want to kno
-
How do I tell Windows 7 to use the AMD Radeon HD 4850 for my OpenGL application?
I have a customer with a new MacBook Pro model that has both the processor embedded 'Sandy Bridge' graphics chip, and an AMD Radeon HD 4850 chip. He has used the Bootcamp utility to partition his hard disk and installed 64-bit Windows 7. He needed so