CSS Setting for Oracle Portal

Has anyone example css configuration for Oracle Portal ?

The CSS does not have any specific Oracle Internet Directory (OID) Mibs or Oracle Portal , or directory Mibs per say. It does however comply to standard MIB II Mibs vendor extinctions to configure with SNMP.

Similar Messages

Current Patch Set for Oracle Database Release 11.2

Hi
I am upgrading oracle 10G to 11GR2 in AIX 5.3 Environment with SAP ECC6 , I have just just installled Oracle 11.2.0.1.0 according to the "Database Upgrade Guide -Upgrade to Oracle Database 11g Release 2 (11.2): UNIX". After database software installation , in upgrade manual in section 3.4.4 it says, you need to install current patch set for oracle database 11g R2 and referencing a SAP note 1431799.
I have just read note 1431799 which says Current Patch Set for Oracle Database Release 11.2 is not generally available for SAP customers until December 2010, also I donu2019t find the note 1522330 as mentioned in 1431799.
Please let me know how I can get current patch set to apply with Oracle 11.2.0.1.0 (Is it in SAP service market place?)
I also want to upgrade my installation to oracle 11.2.0.2, please let me know where I get the patch set to upgrade from 11.2.0.1.0 to 11.2.0.2,
or
I have to live with 11.2.0.1.0 and apply SAP Bundle Patch ( SBP)

Abu Al MAmun,
I understand from your posts that you recently upgraded to 11.2.0.2.
I am having the same difficulty, of finding the current patch set for 11.2. Could you please let me know how you worked around it?
Thanks,
Siri
Hello Everyone,
I did read the post on to how you have to install the current patch set for 11.2.
But honestly, it pretty much flew over my head.
I am trying to upgrade our SAP AIX 64 bit test system from Oracle 10.2.0.4 to 11.2.0.2.
And so far I have downloaded all the required sw for the upgrade, except for the current patch set 11.2.
This is what I have right now:
1) Oracle 11.2 AIX 64 bit upgrade sw - 51038805_part 1 to 51038805_part 7 and 51039800.
2) Database Patches -->Oracle 11.2.0.2 -->
All they have here is
a. Database RDMBS - SAP_112020_201012_AIX.zip and b. SAP_112020_201101_AIX.zip
b. OPatch - OPatch_11201_Generic_v3.zip and mopatch-2_1_6.zip
c. Database Vault - DV - >Generic - p9656644_112020_Generic.zip
If I am not wrong, the Database RDBMS files are nothing but the SAP Bundle Patches that have to be installed after installing the currrent patch set 11.2.0.2 using MOPatch.
But I did not find the currrent patch set 11.2.0.2.
Could someone please explain the process to me in detail? This being my first time , I am finding it a bit hard to catch up with some of the stuff.
Thank You!
Siri

Please provide the patch set for Oracle Enterprise Manager Grid Control 10

Hi,
please provide the patch set for Oracle Enterprise Manager Grid Control 10.2.0.1 and 10.2.0.5 for AIX 5.3
patch set for Oracle Enterprise Manager Grid Control for 11.2.0.2 OS AIX 5.3
Thanks,
Vishal Hande.

user12009184 wrote:
Hi,
please provide the patch set for Oracle Enterprise Manager Grid Control 10.2.0.1 and 10.2.0.5 for AIX 5.3
patch set for Oracle Enterprise Manager Grid Control for 11.2.0.2 OS AIX 5.3
Thanks,
Vishal Hande.you must obtain all patches directly from
http://support.oracle.com

Advanced Development Techniques for Oracle Portal Components

Hello friends,
I have the following problem. I have a report and a form (on a
view) in the same page, and when I select an item of the report
the form is refreshed with the values associated to the selected
item. The problem is that it makes it with delay, the first
selection doesn't show anything and the remaining sample the
data of the previous selection.
This application has been developed as Ken Atkins explains in
its document "Advanced Development Techniques for Oracle Portal
Components."
Oracle Portal Version: 3.0.9.8.0
Thanks in advance.
This is my code:
-- REPORT --
SELECT '<A HREF="http://mipc/portal30/
ALFONSO.refrescar_contenido?
p_variable=nombre_preferencia&p_variable_valor='||nombre_preferen
cia||'&p_pagina=61">'||Preferencias||'</A>' nombre_link
FROM ALFONSO.PREFERENCIAS
-- PROCEDURE TO REFRESH THE PAGE --
CREATE OR REPLACE PROCEDURE refrescar_contenido(p_varible IN
VARCHAR2,
          p_variable_valor IN varchar2,p_pagina IN
VARCHAR2) IS
v_Sesion portal30.wwsto_api_session;
BEGIN
v_Sesion := portal30.wwsto_api_session.load_session
('CONTEXT','SESS_EMP');
v_Sesion.set_attribute(p_varible, p_variable_valor);
v_Sesion.save_session;
owa_util.redirect_url('http://mipc/servlet/page?
pageid='||ppagina||chr(38)||'_dad=portal30'||chr(38)
||'_schema=PORTAL30'||chr(38)||'_mode=3');
END;
-- FORM --
-- ... BEFORE DISPLAYING THE PAGE
alfonso.consulta_preferencia(p_session);
-- PROCEDURE consulta_preferencia --
CREATE OR REPLACE PROCEDURE consulta_preferencia(p_session in
out PORTAL30.wwa_api_module_session) IS
v_RowID VARCHAR2(100);
v_Session portal30.wwsto_api_session;
v_nombre VARCHAR2(40);
BEGIN
v_Session := portal30.wwsto_api_session.load_session
('CONTEXT','SESS_EMP');
v_nombre := v_Session.get_attribute_as_varchar2
('nombre_preferencia');
IF v_nombre IS NOT NULL THEN
BEGIN
     SELECT rowidtochar(rowid) INTO v_RowID
     FROM ALFONSO.VISTAPREFERENCIAS
     WHERE nombre_preferencia = v_nombre;
-- VISTAPREFERENCIAS it is the view in which the form is
based.
END;
-- Tell the component that the query is coming from a link,
and that the rowid
-- is being used to query the correct context record.
p_session.set_value (p_block_name=>'DEFAULT',
p_attribute_name=>'_CALLED_FROM_LINK'
               ,p_value=>'ROWID');
-- Pass the rowid of the context record to query.
p_session.set_value (p_block_name=>'DEFAULT',
p_attribute_name=> '_ROWID'
               ,p_value=> v_RowID);
-- Now do the actual query, using the query button
processing in the target module
portal30.wwa_api_module_event.do_event
('DEFAULT','QUERY_TOP',1,'ON_CLICK',True,'',p_session);
-- Save the session information, which includes the
p_session.save_session;
END IF;
END;
/

You can make the report with a procedure from which you may call to a form by means of a link. It is a possibility, no??
It is better a example:
TABLE A
campo1 VARCHAR2 (20)
campo2 VARCHAR2 (20)
CREATE OR REPLACE PROCEDURE REPORT IS
v_cursor NUMBER;
sentencia VARCHAR2(200);
vnumfilas NUMBER;
rowid_pref VARCHAR2(18);
v_campo1 <schemaname>.A.campo1%TYPE;
v_campo2 <schemaname>.A.campo2%TYPE;
BEGIN
     htp.p('<HTML>');
     htp.p('<HEAD>');
     htp.p('</HEAD>');
     htp.p('<BODY>');
          sentencia := 'SELECT rowidtochar(rowid), campo1, campo2 FROM A';
          DBMS_SQL.PARSE(v_cursor,sentencia,DBMS_SQL.V7);
          DBMS_SQL.DEFINE_COLUMN(v_cursor,1,rowid_pref,18);
          DBMS_SQL.DEFINE_COLUMN(v_cursor,2,v_campo1,20);
          DBMS_SQL.DEFINE_COLUMN(v_cursor,3,v_campo2,20);
          vnumfilas := DBMS_SQL.EXECUTE(v_cursor);
          LOOP
          IF DBMS_SQL.FETCH_ROWS(v_cursor)=0 THEN
                    EXIT;
          END IF;
          DBMS_SQL.COLUMN_VALUE(v_cursor,1,rowid_pref);
          DBMS_SQL.COLUMN_VALUE(v_cursor,2,v_campo1);
          DBMS_SQL.COLUMN_VALUE(v_cursor,2,campo2);
          v_link := '<A href="PORTAL30.wwa_app_module.link?p_arg_names=_moduleid'||chr(38)||'p_arg_values=<form's moduleid>'||chr(38)||'p_arg_names=_rowid'||chr(38)||'p_arg_values='||rowid_pref||chr(34)||'>'||campo1||'</A> '||campo2||' <BR>';
               htp.p(v_link);
            END LOOP;
     htp.p('</BODY>');
     htp.p('</HTML>');
END;
the form has to be based on the table A.
I dont know if this example has errors, but have you the idea??
I hope it helps you out.
(Excuse my english)

Automated tool to convert from Forms to Dynamic Page for Oracle Portal?

Hi Experts,
We are thinking to convert majority of the forms in our portal to dynamic pages. Is there any tool to automate the conversion from Forms to Dynamic page for Oracle Portal 9.0.4.1.0?
Thanks, Abbas

Dear Abbas,
You seem to have two issues... ;-)
If you are finding the Forms are getting corrupt very easily, I'd suggest you go and open a Service Request into Oracle Support (http://metalink.oracle.com). There are a couple of ways where you can have these not corrupted (depeding on the Portal version you are in) and if there isn't yet a way you may get a bug logged and fixed within the next patchset eventually (improving the product functionality).
As to changing it to a dynamic page it might give you a bit more flexibility... yeah. It really depends on what you desire to do. I'd slowly start to code them in this way if your goal is this. As to the former coded forms unfortunately as I've said there isn't a strait way to do that, so you may do this slowly in time...
I hope it helps you a bit further...
Cheers,
Pedro.

Install the latest patch set for Oracle 10.2.0.4.0

I install SAP PI 7.1 EHP1 on Windows Server 2008 (RC1).
I already installed Oracle DB software 10.2.0.4.0
Now I would like to install the latest set for Oracle 10.2.0.4.0
I downloaded the following files from Service Marketplace:
- p8559467_10204_MS_WINX8664.zip
-p7592030_10204_WIN_GENERIC.zip
- Opatch_10204_Generic_v5.zip
- and 3 Patchset files (Patchset_10204MSWINX8664aa.bin, Patchset_10204MSWINX8664ab.bin, Patchset_10204MSWINX8664ac.bin )
Question:
1) What is the procedure/order to install the patch set?
2) Where (in which directory) should I put the 3 Patchset files and which commando should be used here (opathc apply)?
Thank you!

> - p8559467_10204_MS_WINX8664.zip
> -p7592030_10204_WIN_GENERIC.zip
> - Opatch_10204_Generic_v5.zip
> - and 3 Patchset files (Patchset_10204MSWINX8664aa.bin, Patchset_10204MSWINX8664ab.bin, Patchset_10204MSWINX8664ac.bin )
That one is for updates 10.2.0.<4 to 10.2.0.4. Since you are already on 10.2.0.4 that one is no more necessary.
> 1) What is the procedure/order to install the patch set?
> 2) Where (in which directory) should I put the 3 Patchset files and which commando should be used here (opathc apply)?
See Note 1137346 - Oracle 10.2.0: Patches/patch collections for Oracle 10.2.0.4
Basically you will
- patch Opatch
- unzip the patch to a directory where <sid>adm has access
- stop all Oracle Services
- then execute opatch apply
Markus

Wich oracle database i need to buy(license) for oracle portal

wich is better oracle database i need to buy(license) for oracle portal (10g)

Hmmm... I'm not too sure. But we use 10.1.4.
Try contacting your nearest Oracle reseller I guess!

Problems with Macromedia Extension for Oracle Portal

Hello,
Iâm learning about Oracle portal 10g(3.0.4). I'm having some problems about Oracle portal. Please help me as soon as possible.
I created an Web Template using Dreamweaver MX 2004, and IÂ´m tring to send this template to Oracle Portal through dreamweaver webservice (dreamweaver_webservice.zip) using Dreamweaver extension (dreamweaver_extension.zip) but when I try to connect using the extension to send my template I get Invalid Login message (I tried all possible passwords and logins for Oracle Portal and OracleAS). Please Help!
Please help me or give me any materials about oracle portal. I want to study about this subject so if you have books in pdf format please send me.
[email protected]
thanks
Douglas

When I try to open the url with the ORMI port in the brownser I get this error message:
Invalid protocol verification, illegal ORMI request or request performed with an incompatible version of this protocolvInvalid protocol verification, illegal ORMI request or request performed with an incompatible version of this protocol
Ports I have tryed : 1852 and 3202
ex:
http://<host>:<port>/portalTemplate/portalTemplate

Auto sign-on for Oracle Portal ?

How do handle auto sign-on for Oracle Portal ?
I am using Oracle Portal for my home page which should not have any login to the page.

Just define your homepage as available to public. Then as PORTAL30, edit the user PUBLIC and make your homepage his default page. This way, when a user connects to your site, your page will be displayed without any login required. Note that the user will not have any personalized content until they log on and identify themselves.

Sample PL/SQL Portlet Source Code for Oracle Portal 9ias

Hi, I'm a newbie of Oracle Portal technology, and I have a problem:
I would create a PL/SQL portlet that realizes the following functions:
1) Retrieve the username of the portal user logged from WWCTX_API.GET_USER function.
2) Insert into an oracle db table two values about two hidden fields in the HTML FORM of the portlet.
3) Realize the insert commit through the click on the submit button on the Html form of the portlet. I would redirect by the same button to an other page url also.
I've never developed in Portal, and may be useful if someone could post me the source code of the SHOW MODE SECTION in the PROCEDURE SHOW of a SAMPLE PL/SQL PORTLET that realizes the upper functions.
Thanks a lot....

Hi
Here's the code from Helloworld_Portlet example:
procedure show
p_portlet_record wwpro_api_provider.portlet_runtime_record
is
l_portlet wwpro_api_provider.portlet_record;
begin
if (not is_runnable(
p_provider_id => p_portlet_record.provider_id
,p_reference_path => p_portlet_record.reference_path)
) then
raise wwpro_api_provider.PORTLET_SECURITY_EXCEPTION;
end if;
Retrieve the portlet information.
l_portlet := get_portlet_info(
p_provider_id => p_portlet_record.provider_id
,p_language => p_portlet_record.language
if (p_portlet_record.exec_mode = wwpro_api_provider.MODE_SHOW) then
if (p_portlet_record.has_title_region) then
Draw the portlet header and specify what links are available
from that header (i.e. details, customize, help, and about).
The has_title property is set at the page region level.
wwui_api_portlet.draw_portlet_header
p_provider_id => p_portlet_record.provider_id
,p_portlet_id => p_portlet_record.portlet_id
,p_title => l_portlet.title
,p_has_details => true
,p_has_edit => true
,p_has_help => true
,p_has_about => true
,p_referencepath => p_portlet_record.reference_path
,p_back_url => p_portlet_record.page_url
end if;
Draw the portlet borders.
The has_border property is set at the page region level.
wwui_api_portlet.open_portlet(p_portlet_record.has_border);
Display the content of the portlet in the show mode.
Use the wwui_api_portlet.portlet_text() API when
generating the content of the portlet so that the
output uses the portlet CSS.
htp.p(wwui_api_portlet.portlet_text(
p_string => 'Hello World - Mode Show'
,p_level => 1
if (p_portlet_record.has_border) then
wwui_api_portlet.close_portlet;
end if;
elsif (p_portlet_record.exec_mode = wwpro_api_provider.MODE_SHOW_ABOUT) then
Display the about page for the portlet.
htp.p('Hello World - Mode Show About');
elsif (p_portlet_record.exec_mode = wwpro_api_provider.MODE_SHOW_EDIT) then
Display the edit page for the portlet.
htp.p('Hello World - Mode Show Edit');
elsif (p_portlet_record.exec_mode = wwpro_api_provider.MODE_SHOW_HELP) then
Display the help page for the portlet.
htp.p('Hello World - Mode Show Help');
elsif (p_portlet_record.exec_mode = wwpro_api_provider.MODE_SHOW_EDIT_DEFAULTS) then
Display the edit defaults page for the portlet.
htp.p('Hello World - Mode Edit Defaults');
elsif (p_portlet_record.exec_mode = wwpro_api_provider.MODE_SHOW_DETAILS) then
Display the details page for the portlet.
htp.p('Hello World - Mode Show Details');
elsif (p_portlet_record.exec_mode = wwpro_api_provider.MODE_PREVIEW) then
Display the preview page for the portlet.
htp.p('Hello World - Mode Show Preview');
end if;
end show;
I think you need to add this:
You can get the values of your html-form with this command:
v_hidden_1 varchar2(256);
v_hidden_2 varchar2(256);
v_hidden_1 := wwpro_api_parameters.get_value('name_of_hidden_1_in_html_form','p');
v_hidden_2 := wwpro_api_parameters.get_value('name_of_hidden_2_in_html_form','p');
You can get the actual URL with this command:
v_url := p_portlet_record.page_url;
Hope that helps.
Regards,
Mark

2 questions for Oracle portal

i work with portal 10.1.4
2 questions:
Is possible to display in my portal the online users or how many are visited every day the portal ?
i try but i dont cant update my portal to latest version 10.1.4.2.
10.1.4.2 buider have differences from 10.1.4? New features?
thanks,

A quick and dirty way may be to count your logins from wwctx_sso_session$ :
select count(1) from WWCTX_SSO_SESSION$ where SESSION_START_TIME > (sysdate-24) and USER_NAME != 'PUBLIC' ;
This will give you the number of users who have logged on during a 24 hour interval. It doesn't filter out multiple user logins.
Regarding 10.1.4.2 :
It is a patch set on top of Portal 10.1.4. By definition, patch sets should not include any functionality changes. Oracle has added generation of HTML 4.01 Strict for your Portal however. Keep in mind however that you are not having all the fixes which have been incorporated in the patch set. Especially the web cache - PPE communication may be a bit buggy in some cases.

How to create a omniportlet for oracle portal with apex

Hello everyone!
Is there someone who knows how to create a omniportlet?
This is for openning an application in apex from oracle portal using single sign on.
Could you explain me step by step how to do this please?
Thank you.
Regards

Hello Erik,
Please check if the following can help you - http://www.oracle.com/technology/products/database/application_express/howtos/omniportlet_index.html .
Regards,
Arie.

Classpath setting for oracle classes 12 in unix environment

hi all,
i am trying to exceute java program with JDBC statements in it. I am running the code on a remote machine which has both JDK1.4 and oracle 9.i installed .I am accessing the remote machine through PUTTY .can any one suggest how to set the classpath in UNIX environment for oracle.
Thanks

Same way you do it else where:
java -cp <classpath>

Recommended OPEN CURSORS setting for Oracle serving a web app

G'day
Hopefully Phil is still lurking here, so might see this. Or anyone else that knows about Oracle.
I've always thought the default for "maximum pooled statements" setting for an Oracle DSN - which is 300 - is way too low to be sensible for a web app (which, let's face it, any CF DSN is going to be used for!). I usually find I end up with it up around 1000-2000, depending on the sizeof the app, and how busy it is.
I'm adequate with monkeying around with Oracle, and have needed to do a moderate bit of that sort of thing in our dev environment, but I am by no means a DBA, so it's all very seat-of-the-pants.
So I'm keen to know what other people have their maximum pooled statements / open cursors setting set to for their Oracle-driven web sites/apps.
One of the reasons I'm asking is that I wonder if it might be worth while to suggest the default for CF9 is upped to 1000 or so..?
Thoughts / comment?
Adam

I personally would not set the limit any higher than 300, and I'd consider keeping it even lower.
Each pooled query / open connection is imposing resource-burdens on both the CF and the Oracle servers by creating what might be thought of as "a very crowded restaurant." Most of them are just standing around, but they nevertheless are occupying the restaurant, and the potential exists that every one of them might try to order a burger-and-fries at exactly the same time.
The "number of pooled statements" should be such that your SQL-server can actually handle that number of simultaneous requests, both in terms of active searches and of maintaining the still-open result sets. Beyond that point, incoming web requests should be forced to wait. Set an "occupancy limit" to your proverbial restaurant such that everyone could come in and be timely served at the same time.
Categorically, if you plot out response-time graphs about such things (SQL servers, virtual memory subsystems, and so on), they exhibit a fairly-linear performance curve up to a point, after which "the elbow- or knee-point is reached" and beyond that point it becomes exponential in a very, very bad way. I saw this happen in a batch-processing subsystem long ago on a very small mainframe: (yeah, I'm makin' these numbers up...)
Number of Jobs at Once
Completion Time per Job
1
30 seconds
3
40 seconds
8
9 minutes
12
4.5 hours
It was just-about that bad. And what I did to (dramatically...) address the problem was to impose simultaneous-job limits on that subsystem. As long as the number of simultaneous jobs was constrained to "less than 3 at a time," a workload of 12 jobs could be reliably completed in (4 * 40) seconds, whereas if all 12 jobs tried to run at once, the computer would have reason to file a lawsuit for abuse.

Env Variable setting for Oracle 11g windows 2003 R2

Hi ,
While installing the Oracle 11g on windows 2003 R2 getting error while running the prerequsite steps for installtion.failing the env variables path. Please guide us to set up the Environmental variable for the oracle 11g installation.
Thanks..

Tippu wrote:
Hi,
Oracle version Oracle 11.2.0.1
Os Windows 2003 R2
we had set some values. though we are getting the below errors.
Environment variable: "PATH" - This test checks whether the length of the environment variable "PATH" does not exceed the recommended length.
Expected Value
: 1023
Actual Value
: 0
List of errors:
PRVF-3916 : Environment variable name "PATH" is not set on node "laxwzcl01" - Cause: Environment variable value could not be determined. - Action: Ensure that the environment variable is set and access permissions for the Oracle user allow access to read the environment variables. Restart the installer after correcting the setting for environment variable.It's like setting any other environment variable in Windows ...
Right click My Computer, select Properties > Advanced tab > Environment variables button ...
It should be self-evident from that point.

CSS Setting for Oracle Portal

Similar Messages

Maybe you are looking for