CSV Redirected status is not displayed in cluster MMC

I've seen a strange behaviour in the cluster's MMC
I have created a cluster with 2 Windows Server 2012 R2 and a HP MSA FC storage.
2 LUNs were created : one for quorum and the other for VHDX storage configured as CSV.
In order to test redirected access of CSV disk, I've unmapped the storage LUN for node 2 from within the MSA management interface (SMU).
Then :
- Node 1 is accessing fine the LUN
- Node 2 can't access it through FC
As expected node 2 didn't loose access to storage. Get-ClusterSharedVolumeState shows that the volume is "BlockRedirected" for node 2. While copying data on the CSV from node 2 I can see that the network dedicated to CSV is heavy loaded.
With the Cluster MMC, things are more complicated : the CSV status is green "OnLine" (I expected to see yellow / redirected). Right Click / Properties shows "no" for redirected access... (it is actually true!)
The only way to figure out that the disk is redirected is displaying critical events from event log for this disk.
Is it a normal behaviour ? Shouldn't the MMC display the actual status of the disk ?

Infact, I couldn't check this on a Windows Server 2012. However, I know that this counter is incorrect on a 2012 R2. Even the host is in redirected mode, the status says false.
Few weeks back, I was trying to capture the CSV Status in my
Hyper-V dashboard using this option - but dropped that idea as it was not working on 2012 R2. I did this check only on R2 as my lab only have R2 and I assumed that as we have an alternate with 2012 R2, may be deprecated. Now we can conclude that we
cannot make use of sharedvolumeinfo property.
The option available right now in my mind is to check for the event and double check for the number of cluster disk visible on each host, Though its not the best way.
Get-Disk |where {$_.isClustered -eq "True"}
I am also keen to get this information as I would like to pinpoint the DISK which is in CSV redirected mode on my next version of Dashboard. Lets see if any of our friends could make an easy way.
Good luck !
Optimism is the faith that leads to achievement. Nothing can be done without hope and confidence.
InsideVirtualization.com

Similar Messages

Issue with Collaboration Status property - not displaying discussions item

Hi all,
We have a strange issue. We are displaying the collaborationstatus property in some of our iviews. When I add a feedback to a resource, the icon under this column appears and on clicking opens the sub menu with item Feedback (1). But when I start a discussion on the same document and then check the sub menu under this icon, it does not show the item for Discussions, which it should as the collaboration status property is composed of discussion_topic_count property also.
Since this is working on one of the systems in our landscape, I checked the settings of the repository managers and services. Everything is same on both servers. But it works on one and does not work on another.
Has anyone faced this issue before? Does anyone know the solution to this?
BTW I extracted all the KM property values for the file on which I had started the discussion and the discussion_topic_count property was not available in the list, even though the properties corresponding to feedback, reviews and comments were available.
Regards
Ranjith

Even if I don't use a custom item renderer class and stick it straight into the list control, I still get the same exact issue.
<s:List id="productCategoryList" x="10" width="100%" height="50" borderVisible="false"
   change="productCategoryList_changeHandler(event)"
   dataProvider="{productService.productCategoryList}"
   >
<s:layout>
   <s:HorizontalLayout />
</s:layout>
<s:itemRenderer>
   <fx:Component>
    <s:ItemRenderer>
     <s:Image source="{data.imagePath}" />
     <s:Label text="hi" />
    </s:ItemRenderer>
   </fx:Component>
</s:itemRenderer>
</s:List>

Report Status is Not Displaying in My history

Hi All,
There is no history details are displayed in history but it was appear in schedule tab.
Can anyone tell me how to fix it
Regards

Hi,
Please ask your ABAPer to check whether there is any restriction on the BLART (Document type) field while selecting the data from BSEG or BSID/BSAD table.
ABAPer need to include the AB document type while selecting the data.
Regards,
Gaurav

GUI status items are not displayed

Hi all,
Some parts of gui status are not displayed but some of them are displayed.
What is the problem?
Thanks.
deniz.

Hi snehi chouhan,
I have created a program and two gui statuses for this.
One of them is set at first display of report but not all items.
Thanks.

ICloud status not displayed correctly after changing tags

Hi everybody,
I have just below 25 000 songs in the iTunes library that I use for iTunes Match (my complete library is actually much larger but I created a separate library to stay below the 25 000 songs limit).
After changing some tags in iTunes (I had some artists listed twice, once in the format "<last name>, <first name>" and once "<first name> <last name>" and wanted to harmonize this) the iCloud status of most of my songs is no longer displayed correctly. If I create a smart playlist containing all "matched" songs it finds only about 1000 songs, a playlist for "uploaded" songs contains only about 250 songs, the vast majority of my songs simply have NO iCloud status whatsoever (not even "waiting").
Trying to fix this, I selected all of my songs, option clicked and chose "Add it iCloud". After waiting some time, nothing changed. The funny thing is: iTunes match reports that 24 669 songs (the correct number) are available in iCloud.
So basically everything works and I am also able to download all of my songs on my iPhone. Still, it's a little bit annoying that the iCloud status is not displayed correctly and smart playlists filtering for iCloud status don't work. Does anybody know a way to fix this?
Thanks for any help,
Andreas

The reason why the C3850 switch stack is showing as standalone in LMS CiscoView is because
it's returning sysObjectID as standalone.
It should return as 1.3.6.1.4.1.9.1.1745 --cat38xxstack
While, if you poll it for sysObjectID, the Catalyst 3850 stack switches will be returning OID 1.3.6.1.4.1.9.1.1641.
This is an IOS bug "CSCul00003 - Incorrect Sys OID for Cat3850 Stack device".
Unless this bug is fixed, LMS will not be able to show it as stack device.
You can try to check if you can manually change the device identity to cat38xxstack from Inventory > add/edit device > edit identity.
Else we need to wait for the fix of this bug.
-Thanks
Vinod

Function keys status is not showing on screen

Hi... please help me. I m havin lenova ideapad s10-2 netbook. In this when i press fn + function keys action is performing but its status is not displaying on screen. So if i want to switch on WLAN when i press fn+F5 screen is not showing. Also usb devices are not detecting my laptop. Please help me out.......
Thanks
Solved!
Go to Solution.

shiva2shetty wrote:
Thanks 4 information. I will try it. Also QS (Quick start) and "one key recovery" is not working when OS is loaded. I need to open from start menu. After that only QS and Function key status display are working. So can you tell me how to load these twodefault when OS boots.
Thanks
Hi for Qucikstart ... if there is still installed .. you could activate in in two ways... Start Computer press immidiate F2 for BIOS in move with arrow keys to CONFIG Page there you could found Quickstart set to enable... leave with press F10 save and exit...
or in windows XP start control panel you found QUICKSTART Configuration Tool click on this program you could activate at startup save and exit...
Or if Quickstart is not installed .. download from here S10-2 Driver Site
there you can also found OKR
sincerely KalvinKlein
by the way ... did you re-install the system ? which OS did you use? , you didnt say that in your first post ... that sounds to me that you try to re-install or use an old XP without SP3 ....
To fulfill your quest here is the driver page... for all ... pick your S10-2 OS drivers and install at first the chipset driver...
Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

Values for htmldb_item.text field do not display in CSV output

HTML DB experts,
I have a report query with the following 2 items in the SELECT statement:
wwv_flow_item.display_and_save(2, DOC_CD, 10) DOC_CD,
htmldb_item.text(3, DOC_DESC, 50, 255) DOC_DESC
I have enabled the CSV output for this report. The problem is, when I generate a csv file, only the DOC_CD (wwv_flow_item.display_and_save) displays. The values for the DOC_DESC (htmldb_item.text) do not display. What do I need to do to get the DOC_DESC to display?
Thanks for your help.
Message was edited by:
[email protected]

Items rendered using htmldb_item generate HTML tags on the form, not plain text. You are right, the CSV export excludes them.
Your best best is to create another report region on some other page with the same query except replace all the htmldb_item() calls with regular columns i.e. make it a read-only report and use the "export: CSV" template and put up a link to this page at the bottom of your editable report (instead of the builtin CSV link). This way when you click on this link, it will generate your report and immediately offer to export it to CSV
Hope this helps.

Status bar of Oracle from runtime applet is not displaying all of a sudden

Hello,
The status bar of Oracle form runtime applet is not displaying all of a sudden..It was displaying before but now its not......It helps me to see errors......how can I restore it?

My console was set to a specific window name..it was not null at all....but the status bar wont show...
But I solved it ...by changing the applet size...
Applet container size is controlled by the HEIGHT and WIDTH parameters in the formsweb.cfg. To maximize the applet area to the size of the browser, do the following:
HEIGHT=100%
WIDTH=100%
Thank you all for your help and support...
Edited by: user10746194 on Feb 11, 2010 6:33 AM

CSV output = Yes, but link not displayed

Hi,
Anyone encountered/know how to fix this one?
I've a report in an SQL Report region with CSV Output = YES, but the link label is not displayed.
(CSV link is displayed OK on other reports).
Thanks
John D

John,
The report template has to contain a certain substitution string. Please see the popup help for that yes/no selector on the report attributes page.
Scott

IChat will not display status messages.

I'm having a problem - iChat will not display any "available" status messages. All away messages display properly, but any unique status messages will not display, nor does the word "available". I have restarted both iChat and my MacBook several times, deleted the com.ichat.AIM preferences file, but it seems nothing I do will make my buddy's unique status messages display.
I did not previously use Chax but downloaded it to see if it would help; it didn't. I'm willing to delete it if it will solve my problem.
Any help?
Thanks!
Message was edited by: Paperclippe

Ok,
As you either suspected or found out the Saved Status Messages are in com.apple.ihat.plist
The fact they didn't display would suggest that they may have become corrupted and the deletion of the .plist would have helped.
BUT you went on to mention that the Available Choice also does not display.
This would suggest one of two things.
1) Either you are not fully Logged in to the AIM servers properly
Do your Buddies see you are On-line and Available ?
Do they perceive your Status change ?
Can you Text chat to people ?
Can you send files or Pic in Text chats ?
Try Deleting com.apple.ichat.AIM.plist and restarting iChat to see if that helps
2) Something about iChat or it's support folders (the bits that make the Available show up), that are at fault.
In this case try deleting com.apple.ichatAgent.plist
This controls which accounts login and help the app to run some of the features such as the Video/Audio part and Text Messaging.
I would do these one at a time just so you know which it was that fixed it.
8:27 PM Friday; June 20, 2008

OS X does not boot, a status bar is displayed

The system starts booting and the standard grey screen appears. In addition, a status bar is displayed below the spinning circle. It disappears after going to 100%, but nothing changes. The system hangs at the grey screen.
I have recently installed Windows with a trial of MacDrive. I have not used my OS X for a couple of days.
I had installed and then disabled Mac FUSE, however there might have been a couple successful boot sequences afterwards.
I tried starting system from a Mac OS Install DVD. Disk utility found errors and failed to repair them. I could format the drive, but this is terribly time consuming....

Thank you for the contribution. Sadly, the cmd + v did not work- I tried a couple of times without any result.
I have decided to reinstall the OS after all attempts to repair the disk failed. However, it is not that simple. The partition does not show up at the "Where do you want to install Mac OS X to" menu. Furthermore, erase fails as well- the Disk Utility appears to be unable to mount the disk. The bar is basically stuck at approx 3/4 for 15 minutes now....
Restarting and retrying failed.

Link URL containing feed: is not displayed correctly in the status bar

When a link contains feed: in the URL, it is not displayed correctly in the status bar.
The actual URL is
a href="feed:http://www.....com/feed/"
but the URL shown in the status bar is
feed://http//www.....com/feed/
IE8 shows the correct URL in the status bar. Not sure if this is a problem, but thought I would report it.

Such a feed works for me even if it is displayed differently then you expect on the status bar.
<pre><nowiki>data:text/html,<a href="feed:https://support.mozilla.com/en-US/questions/758020/feed">feed</a></nowiki></pre>

Distributed Transaction Coordinator not displaying remotely on a server core cluster node..

We setup a server core single node cluster (W2012 R2). The MS DTC is running, and the Distributed Transaction Coordinator firewall rules are enabled. I can connect to the firewall rules and compmgmt.msc remotely for this server. When
I attempt to connect to the Component Services Management console with this server, the MS DTC object is not displayed. Only the COM+ applications are displayed. We've setup other server core instances with out clustering and DTC is displayed.

Hi Steve,
We just finished the local test and found this behavior is by design. It’s expected that we can’t see the DTC remotely from component services for a cluster node.
In my lab, 2012R2 node3 is a single node cluster and has DTC role.

Versioing: CVS Status not displaying new repository files

I did some quick searches and did not find this in the forum. Hopefully it is not a duplicate. If so, please point me to the original thread.
We have a multi-developer project underway with Creator. We are using CVS for the shared source repository. When one developer checks in a new file and other developer's use the CVS Status option, the new files do not display as 'Needs Checkout'. Of course, any files the user already has checked out display with the appropriate status but new repository files are missing.
Since we use CVS extensively, right now the developers communicate the new files and then check them out via command line CVS. We have the IDE set in 'expert' mode, etc.
Is this a know bug or is there some setting for the IDE to get it to display files with status 'Needs Checkout' from the cvs repository?

As per the documentation at:
http://ximbiot.com/cvs/manual/cvs-1.11.22/cvs_10.html
Based on what operations you have performed on a checked out file, and what operations others have performed to that file in the repository, one can classify a file in a number of states. The states, as reported by the status command, are:
Needs Checkout
Someone else has committed a newer revision to the repository. The name is slightly misleading; you will ordinarily use update rather than checkout to get that newer revision.
...Thus the 'cvs status' command works only on local files and 'Needs Checkout', from cvs documentation itself, is a misnomer and is really more like 'Needs Update'.
In Creator (and NetBeans), the nodes on the cvs explorer actually map to physical files and thus do not display nodes for files that may only be in the server. But you do raise an interesting question though; creator could display virtual nodes for files not in local workspace thereby providing a preview before actual checkout...

Item in Transfer Process - Follow on documents status not displayed

Hello experts,
User created a shopping cart of 12 line items (out of that no 3rd is deleted) and PO is created in backend r/3 system.
Now when i see the status of my last item ie 12th line item is "Item in Transfer Process". and for 3rd item which is deleted for that also Status shown PO NO (I1113) i can see that PO no is there when i check follow on document.Problem is i want to change the status of 12th line item with its respective PO no .
Activity done by me to solve
If i manually update the status in the table CRM_JEST then the status will get changed but the follow on document is not displayed evenafter run reports like CLEAN_REQREQ_UP and Get status2. i am trying to run a report BBP_ALERT_SB_NOTTRANSFERED but it got cancelled. even i tried to run a function module BBP_PD_SC_RESUBMIT but short dump will come. i have implemeted a suggested SAP note 729967 but still problem persist.
In BBP_PD and in table BBP_PDBEI field ( BE_OBJECT_ID ) in this field Ponumber is there against that line item.
Thanks
Sunny Sharma

Hi Sunny,
the manual action taken on the transfer is dangerous and can cause even more inconsistency.
Hence you may have changed some tables of the SC manually, I would suggest rather to delete SC items, and create a new SC for them.
Regards,
Peter

CSV Redirected status is not displayed in cluster MMC

Similar Messages

Maybe you are looking for