CUC User Web Page Customization
Hi Guys,
Is there any way to change CUC User Web Page look and feel with customer details?
Rgds,
Ashraf
Ashraf,
AFAIK, it's not possible.
Sorry mate !!
GP.
Similar Messages
-
Cisco call manager user web page guide
Hi all
Has anyone got a really quick and easy call manager user web page guide? I need one for my users
cheers
CarlThanks but I've tried all that. It happens in Chrome also. I've tried Opera and it works on that. I've read other forums and it looks like a Java script issue that Chrome and now Firefox Mobile cannot seem to resolve. My preference is Firefox and I'm sure as more tablets get out then this will be solved at some point. I just don't know how it is prioritized. I do know that in order for Androids to be viable in the business sector they need to address issues like these with a higher priority.
-
ISE Guest portal web page customization
Folks,
Excuse me for being ignorant but I'm curious where I can get a "localization support example with sample HTML pages".
This is what I found in the user guide:
"You can customize the Guest portal by uploading HTML pages to Cisco ISE. When you upload customized pages, you are responsible for the appropriate localization support for your deployment. Cisco ISE provides a localization support example with sample HTML pages, which you can use as a guide. ISE provides the ability to upload, store, and render custom internationalized HTML pages"
Let's say the web page that I want to show on the Guest portal has some style sheets (CSS). How am I going to upload it ?Please review the below link which might be helpful:
http://www.cisco.com/en/US/solutions/collateral/ns340/ns414/ns742/ns744/docs/howto_41_guest_services.pdf
http://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ise10_guest_pol.html -
Issue with User web page into Call Manager
Hello
I have an issue where all my users can log into their User page on UCM but when they make a change to speed dial or anything else, the change does not reflect on the phone in UCM. Doing a reset from their web page doesn't reset the phone. This is UCM 7.1.5 and the standard ccm end user group is enable for all end users.
thanksHi Bill -
Have you verified your User Management Roles and effective permissions? Go to User Management - Roles - select Standard CCMUSER Administration and for the permissions you want, ensure both Read and Update are selected.
Role Information
Application
Cisco Call Manager End User
Name
Description
Resource Access Information
">Resource Description Privilege
read update
CCMUser: Access List
read update
CCMUser: Device
read update
CCMUser: Directory
read update
CCMUser: Fast Dials
read update
CCMUser: IP Phone Services
read update
CCMUser: Line Settings
read update
CCMUser: Personal Address Book
read update
CCMUser: Plugins
read update
CCMUser: RemoteDestination
read update
CCMUser: Service URL
read update
CCMUser: Speed Dial User
read update
CCMUser: User Settings
read update
You can also check an individual's effective permissions by using these procedures:
Viewing a User's Roles, User Groups, and Permissions
This section describes how to view the roles, user groups, and permissions that are assigned to a user that belongs to a specified user group. Use the next procedure to view the roles, user groups, and permissions that are assigned to a user in a user group.
Note: You can also view user roles by using User Management > Application User (for application users) or User Management >End User (for end users) to view a particular user and then display the user roles.
Choose User Management > User Group.
The Find and List User Groups window displays.
Find the user group that has the users for which you want to display assigned roles.
Click the name of the user group for which you want to view the roles that are assigned to the users.
The User Group Configuration window displays for the user group that you chose. The Users in Group pane shows the users that belong to the user group.
For a particular user, click the i icon in the Permission column for the user.
The User Privilege window displays. For the user that you chose, this information displays:
User groups to which the user belongs
Roles that are assigned to the user
Resources to which the user has access. For each resource, this information displays:
Application
Resource
Permission (read and/or update)
Now if both items above look OK, you might check your DB replication status. I assume you have a Publisher and one or more Subscribers? User phones registered to Subscriber? You can check replication several ways:
CLI
RTMT
Unified Reporting on CUCM administrator web page - select "Unified CM Database Replication Debug" report. This is the easiest.
The desired Replication State is 2.
Here is some further information:
Check the DB replication status on all the Cisco Unified Communications Manager nodes in the cluster to ensure that all servers are replicating database changes successfully. You can check by using either RTMT or a CLI command.
• To check by using RTMT, access the Database Summary and inspect the replication status.
• To check by using the CLI, enter the command that is shown in the following example: admin: show perf query class "Number of Replicates Created and State of Replication"
==>query class :
- Perf class (Number of Replicates Created and State of Replication) has instances and values:
ReplicateCount -> Number of Replicates Created = 344 ReplicateCount -> Replicate_State = 2
Be aware that the Replicate_State object shows a value of 2 in this case. The following list shows the possible values for Replicate_State:
0—Replication Not Started. Either no subscribers exist, or the Database Layer Monitor service is not running and has not been running since the subscriber was installed.
1—Replicates have been created, but their count is incorrect.
2—Replication is good.
3—Replication is bad in the cluster.
4—Replication setup did not succeed.
I'm thinking it's more your Roles/permissions and not replication, but I included just in case. Hope this helps!
Ginger -
OIM10g Users-Manage Page Customization
Hi,
How can I add a Custom field with dropdown values in OIM10g Users-Mange page search criteria.Hi,
Thanks for the Reply,I did see your message but i culdn't find the correct form to map the Lookup in Formmetadata.I tried mapping it in User Mangement Section but culdn't see the change come through.Please can you tell the form i need to map the Lookup in Formmetadata.xml
I have created a lookup like Lookup.WebClient.Users.EmployeeType
Thanks,
Srini -
Cisco Unified CM User Options web page 404
I seem to be missing something very simple, but I have dived into the cisco pages and found nothing. I want to enable the user web pages and have started to test it on one user and everytime in every browser I get 404. When I open it in IE I at least get notified of a certificate, but then without any chance to enter credentials I get the 404 page. The same user is able to access the directories on a phone with no trouble. I know that I am missing something very simple, but what?
Thanks in advace for any assistanceI closed all the windows that were even related to my CUCM page, no luck. I then reset IE and simply typed / in the address bar and I get a completely white page and the address bar changed to http://:8443/. I then change the http to https and it ask me to accept the cert or walk away from the site. I said continue and it then gives me this error screen:
HTTP Status 404 - /user
type: Status report
message: /user
description: The requested resource (/user) is not available.
Again thanks for the idea -
Just installed upgrade to Firefox 4.0. Where did the "Stop" button go on the Navigation Bar. I checked the Customize dialogue box and it isn't included. Is anyone else missing it? Is there anyway to install the "Stop" button for loading web pages or is this option completely gone from Firefox now? It was a very helpful button and allowed us users to stop a web page and move on if it wasn't what we needed.
In Firefox 4 by default the Stop, Go and Reload buttons are combined and attached to the right hand edge of the location bar.
When you are typing in the location bar it will show the Go button. When a site is loading it shows the Stop button. At other times it shows the Reload button.
If you want separate buttons, right-click on a toolbar and choose Customize, you can then drag and drop the stop or reload buttons and place them elsewhere. If you place them in the order "Reload-Stop" on the right hand edge of the location bar they will be combined again. For more details on customizing the toolbar see https://support.mozilla.com/kb/How+to+customize+the+toolbar -
Downloaded 5.1.1 to my iphone. Now, Safari will not connect to my server. Can not download web pages and many of my apps. Email seems to be ok. iphone running slow and sluggish. I have read several other users have experienced the same problem. Any solutions?
Basic troubleshooting steps oultlined in the User Guide are restart, reset, restore from backup, restore as new device.
You need to go through all steps in succession until your problem is solved. If going through ALL these steps fails to resolve your issue, then you'll need to bring your phone into Apple for evaluation and possible replacement. -
Access to WPC Web Pages by Anonymous Users?
Hello,
i want to give anonymous users access to Web Pages that were created with the Web Page Composer.
In did the following:
1. create the Web Pages,Site Navigation etc....
2. edited the permissions of the site: grant anonymous users Read Access.
3.included the site navigation into the navigation of the anoymous users
When i access the portal as anonymous users and try to open a Web Page, i get a logon screen for Authentification.
I think that there is a problem, that i didn't find any way to set the Authentification Scheme for these Web Pages to "Anonymous". This is the way it has to be done with other iViews.
When i am accessing the page with an authenticated users, i have no problem with displaying the same Web Pages.
Is there anywhere an attribute i need to set? Or is it currently not supported?
Regards,
Marcus
Message was edited by:
Marcus Böhm1. Configuration in PCD - go to Content Administration -> Portal Content-> Portal Content -> Web Page Composer -> Container iViews -> WPC
Default Containers. All of the iViews in this location should have the
"anonymous" authentication scheme. The next location which should be
checked is Content Administration -> Portal Content -> Portal Content ->Web Page Composer -> iView Templates. Again all of the iViews should
have the "anonymous" authentication scheme. The same applies to all the
templates which reside in Content Administration -> Portal Content ->
Portal Content -> Web Page Composer -> Page Layout Templates. Finally
check if all the pages which reside in Content Administration -> Portal
Content -> Portal Content -> Web Page Composer -> Page Layouts have the
"anonymous" authentication scheme.
2. Configuration in KM - make sure that all the pages, which should be
displayed to an anonymous user have in their permissions the Anonymous
Users Group.
3. Security zones - if you go to System Administration -> Permissions ->Security Zones -> com.sap.nw.wpc -> wpc -> no_safety and you open the
permissions of this object, the Anonymous Users group must be added in
the list.
If all mentioned objects have their setting as described and you still
experience problems (e.g. you see a browser dialog window for
authentication), the reason most probably is, that the KM is not
configured for anonymous access. A full description of the needed steps
is provided with note 837898. -
How do I open a web page in Adobe Reader? I got the app for ipad2, but when a page says I need a certain version of AR, I don't know what to do. I'm a new user and don't know if I have to "open" AR and it automatically reads whatever doc I have up on the web, or is it always running and any web page I'm on should show a button to click in order to open the page in AR?
If a website says that you need a certain version of Adobe Reader, it is probably attempting to detect whether or not you have the Adobe Reader browser plugin installed. This is something that only works on desktop systems where browser plugins exist. Since browser plugins don't exist on mobile, website developers should take care to present different messages and provide different options for downloading PDF's when visited by mobile browsers. I recommend contacting the website owner and requesting that they implement access for mobile devices.
-
Want user to click on pic from my Web page and for it to enlarge in awindow
I've uploaded my pic from iPhoto and placed in on my page in iWeb. I want the user to be able to click on the pic on my web page and for the page to "enlarge" so the user can see it better. Possibly in a new window.
Is this possible in iWeb?There are a couple of ways. See my demo pages Fancy Zoom and Opening Item in New Specially Sized Window. Both will do what you want. The code uses is also described.
OT -
SharePoint 2010 Allow User to Add Comments to Files in a Library and to the Header of the Web-Page
(1) I need to allow an end-user to be able to add comments to files either when they are added to a library or after they are added. I didn't see a Column available for adding to a Document Library for "Comments".
(2) I need the same user to be able to add text/comments to the Header of the web-page that contains the library (above the library at the top of the screen).
When I (the SP Admin) add the "Content Editor Web-Part" to the top of the web-page that contains the Document Library, the Toolbar disappears. The Content Editor Web-Part would be ideal to allow the end-user to add comments to the Header, but I
really need the Toolbar available.
Is there another Web-Part that I could use for allowing comments to be added to the Header of a web-page without disabling the Toolbar, or is there a known-fix for allowing the Toolbar to be available and functional after adding a Content Editor Web-Part?
JCashonHi,
According to your post, my understanding is that you want to add Comments to Files in a Library and to the Header of the Web-Page.
(1)If you use the document content type in the library, it will contain the “Comments” field automatically. When you add the document, you can enter the conments. You can also edit the “Comments” field after the document added.
(2)If you add the add the "Content Editor Web-Part" to the AllItem.aspx Page, you can add the text to the web part as the Header.
Best Regards,
Linda Li
Linda Li
TechNet Community Support -
Non-admin user can not logon to web pages
I setup an iMac, I am the administrator and I set up a non-admin user. I also setup parental controls to their default settings.
The user can log on to their account but when they go to a web page, any web page, that requires a logon, the authentication fails. I can login to the iMac as the administrator and can go to those same pages and try to logon and it works.
I tried disabling parenting controls but it still doesn't work. I don't think that I should have to change any settings to allow a non-admin user to log on to a website, but maybe there is something I am missing...
Any tips or things I should try?It's recommended to have your Security mode on.
Anyways if you wish to, go to ''''Firefox'''' tab > ''''Options'''' > ''''Options'''' > '''''Security'''''
and do your custom settings.
Re-installing Mozilla Firefox may fix this problem. -
Web pages are very slow to load airport is fine and other users do not have any problems
my macbook pro is very slow to load web pages airport is running fine and other users do not have any issues?
Likely a corrupted cache, do #12 and #13 here, if that doesn't work run through the Steps 1+
Step by Step to fix your Mac
Why is my computer slow? -
hello,
i've created a site with the help of this blog:
"Web Page Composer - a new Way to create and publish Web Pages in the Portal"
Web Page Composer - Web Page Layout (Part IV)
Web Page Composer - the XML Editor Framework (Part II)
Web Page Composer how easy it is to create and publish a web page (Part III)
Web Page Composer - Web Page Layout (Part IV)
i have published it, asigned the role to some users and the content is only seen by those who have super admin role to.
pls help
thxHi there,
i found the solution:
the solution is to modify the permission on security zone in this way:
go to System Administration -> Permissions ->Security Zones -> com.sap.nw.wpc -> wpc -> no_safety and open the permissions of this object to add Authenticated Users gruop with this option:
Authenticated Users (Group) : read
Katayoun Mahpour
Maybe you are looking for
-
T.code FTXP: creating a tax code
Hi All, I know good enough t.code FTXP, but I've to create a particular tax code. Its "tax type" is "input tax". The peculiarity of this tax code is that it's calculated as a percentage of a certain tax base amount, but when the document which contai
-
Sold to party is not taking while licencse processing in deemed export
Dear all i am having a problem in licence processing creating in deemed export when i want to enter the sold to party and ship to party in J1ilic01 screen the system is showing invalid sold - to - party and ship - to - party what will be the p
-
Font rendering difference between Acrobat 8 and Acobat 9
We received a PDF file that looks fine in Acrobat 8 and in Preview but when opened in Acrobat 9 the lower half of many fonts is cut off. We see the problem on multiple computers, Mac and PC with both Acrobat Pro 9 and Reader 9. Is there anything that
-
I have a DVD which I need to insert into a presentation does anyone know how to do this. The video format is VTS and I have saved the DVD on my desk top but it wont let me insert into my presentation.
-
Source distribution overwrite vi
Hi! I'm making a source distribution for my dynamically called VI's. These VIs operates on classes. I would like make one Distribution, that contains all called vis. My problem is, I've serveral overwrite class methods, with equal names as well. But