CUCM OS Administration Page Not There in CUCM 8.6

No option for CUCM OS Administration Page in navigation menu in CUCM 8.6
Unable to access CUCM OS Administration page.
following error came while using url http://<ip-address>/cmplatform
HTTP Status 404 - /cmplatform
type: Status report
message: /cmplatform
description: The requested resource (/cmplatform) is not available.

Try restarting tomcat
Also please post in the right forum, this one is for video over ip
Sent from Cisco Technical Support iPad App

Similar Messages

WRV210 Administration pages not visible in Internet Explorer

I recently updated my firmware in my WRV210 router to Version 2.0.1.5 which is the most recent on Cisco's download page. After upgrading the firmware, I found that some of the administration pages do not appear to load correctly in internet explorer version 9.0.5. For example, the ADMINISTRATION -> MANAGEMENT page has data but to see the data, I have to scroll down about 3 pages. All five entries under STATUS do not have any data visible at all which is typical for most of the other administration pages. An image of the Status Router page is inserted below. I have logged in to the administration pages with an old version of Firefox 3.0.14 and the pages are visible. The operating system that I am running is Windows 7 64bit.
I haven't run across any other entries like on this or other sites. Are there any known solutions to this?

I have a WRV210 at a client site, and after upgrading to firmware 2.0.1.5 I've noticed the same behaviour. Upon inspection of the HTML I notive the right-pane-content area contains a
element right before the form begins. This tag was intended to hold a background image/style for the content area, probably white or at least some colour other than the already blue page background. It has a defined width and height of 1000px * 2622px; If I remove the and re-render the page, the form displays at the top. So it seems this was supposed to encompass the form, but instead because it self-terminates, precedes it with a vacant space 2622px high; It seems then that this is indeed a bug, in many pages.
I've also noticed that the web server on this router is annoyingly slow, though I can't remember if it's any slower than the previous firmware revision. I, like many, purchase Cisco products for the promise of higher quality, greater stability, and better support/documentation/community than other competing manufacturers. Sometimes you win....

OCS Portal Page not there

I finally completed the install of Collaboration Suite today, and followed along with the post-install instructions to set up the Oracle Collaboration Suite User Group, User Home page, and Administration page in Portal. I see the OCS_Page_Group listed, and I see the OCS_Main_Page page, but when I view it, there is nothing there. I see a reference in the documentation that talks about the Search, Calendar, and My Favorites portlets that were supposed to be created during installation. I don't see anything close to that.
Anybody know what to do? I want to have a portal page that contains the user's email, calendar, favorites, news, stocks, etc. I don't know what to do about creating the calendar and email portlets. I also don't see anything about creating Files Online portlet.
Thanks,
Michael

My install was on Redhat 7.3 from the iso disk images available on redhat.com. I considered downgrading my kernel, but I'm not that strong with Linux so worked with what I had. The only linux change I made was to install a ksh rpm which is mandatory. I had changed kernel parameters but don't think that it really matters for installation purposes.
The install that I have running at the moment was the simplest I could think of and only has an infrastructure tier and a middle tier, and I installed in the midtier install, portal, wireless and calendar. For both installs I change genclntsh as has been referenced in other notes in this forum. After my infrastructure install I made modifications to the listener, http, https and ldap components of the install. I also rebooted between midtier and infrastructure installs, and then started infrastructure components manually. I also deleted /etc/emtab file so that Enterprise Manager will be installed for the midtier. None of this seems to be documented very well in any of the Install guides/release notes etc, and I only got there with some help from other people who have access to MetaLink. Further there is nothing documented about how to stop/start/verify an OCS installation. Anyway, once the required infrastructure components are started, the midtier install seems to run fine, although for some reason I sometimes have to copy extproc from the infrastructure bin directory to the midtier bin directory.
Anyway, I got it running eventually and the calendar server seems to be doing what I want but it was a lot of effort for not much value above the plain infrastructure if you ask me. I'm confused why there needs to be three tiers anyway, as the infra and midtiers especially seem to install the same things. Couldn't they two tiers have been consolidated in some way?
I would be interested in what other people percieve as the value of collaboration suite and how they are planning on using it.
regards,
Anthony.

Metadata tab in master page not there

"Define your sitemap". I right clicked the master page just liked it asked and went to page properties but there was no metadata tab to allow me to add a prefix or suffix? NB I have the latest version of Adobe Muse.

I am having the same issue as the person above. Here is a screen shot of where I clicked on page properties:
As well as the screen I see:
I too have the latest update of Adobe Muse CS6 (Release Version: v4.1, Build 8, Cl 774415.
I do have the MetaData option if I put an image into one of the pages (any one of the pages), go back to the plan page, and right click on the main master. Yet, from what the tutorial says as well as your image I should be able to do it previous to doing that.
Any help you can give me would be greatly appreciated!
Thanks,
Joni

CUCM 8.6.2 Web Administration Page is being blocking occasionally

Hi Everyone:
I have a little problem with the administration page of the CUCM 8.6.2.20000-2. The web page (occasionally) go to blank page (in publisher or subscriber). The only thing that I can do to restablish the service is restart by SSH the service Cisco Tomcat.
The same thing happend when I am working and suddenly I press any link or access and the page go to blank. When this situation occur, the other functions are fine, the only problem is with the web page. I have tried with different browsers like IE, Mozilla, Chrome but the result is the same. I have checked the RTMT but I can not see anything wrong.
What can it happen? Any idea? Any advice?
I appreciate your help. Thanks.

Hi there,
How often does this occur? There is an issue with Tomcat and CUCM 8.6 in regards to AXL requests:
CSCty36110 - CUCM 8.6 Tomcat OOM with "com.rsa.sslj.x.cu" suspect under high AXL Load
Description
Symptom:
Tomcat becomes unreachable or inaccessible after a number of days. So far the observed timeframe tends to be between 7 and 20 days.
If the generated hprof shows the main suspect as "com.rsa.sslj.x.cu" then this is most likely the cause.
Conditions:
This has been observed in environments where a very large number of AXL queries are done on the CUCM server.
Workaround:
Restart the Tomcat service on the CLI using "utils service restart Cisco Tomcat".
Prevent the external application from performing AXL queries. This is usually not a feasible workaround as AXL queries are a requirement for basic functionality of some applications.
HTH,
Chris

Pulisher CUCM web page not display

Hello,
Publisher cucm web page not displayed and DB not accessible IP phones working on Subscriber but I can't change any settings.Cisco Tomcat service not working and I can't restarting. (ver. 7.1.5)

If you cannot change any config then it's more than just not being able to use a webpage, there must be some problem with the ccm/DB services on the PUB.
SSH to the server and see if there are error messages, I'd suggest a whole reboot.
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk

Cisco Call Manager Administration Page Drop down menu not working

I'm running the mobile app browser on my Xoom tablet and when I log into Cisco Call Manager Administration page I get the menu's but it will not pull down the options. The same issue happens in google chrome. I use your browser on my desktop and have no issues logging into Cisco Call Manager Administration page and getting the drop down menu's to appear but the mobile version of your browser is not working. Is there a work around? I tried changing the UAString to Desktop, iPad etc and the issue is still there.

Thanks but I've tried all that. It happens in Chrome also. I've tried Opera and it works on that. I've read other forums and it looks like a Java script issue that Chrome and now Firefox Mobile cannot seem to resolve. My preference is Firefox and I'm sure as more tablets get out then this will be solved at some point. I just don't know how it is prioritized. I do know that in order for Androids to be viable in the business sector they need to address issues like these with a higher priority.

Party Entrance Tone not working on CUCM 10.5(1.10000.7)

Party Entrance Tone not working on CUCM 10.5(1.10000.7) . This is an intermitent issue for Meet Me conference.
++On the CUCM Service Parameter Party Entrance Tone has is TRUE .
++On Directory number Party Entrance Tone is ON . However the Party entrance tone (Beep tone) not coming when Meet Me conference going on .
Gateway 3945 with IOS Version 15.3(3)M5, RELEASE SOFTWARE (fc3).
The conference Configureation as below.
sccp local GigabitEthernet0/0
sccp ccm 172.20.0.152 identifier 1 priority 1 version 7.0
sccp ccm 172.20.0.153 identifier 2 priority 2 version 7.0
sccp ccm 172.22.0.110 identifier 3 priority 3 version 7.0
sccp ccm 172.22.0.111 identifier 4 priority 4 version 7.0
sccp
sccp ccm group 1
bind interface GigabitEthernet0/0
associate ccm 1 priority 1
associate ccm 2 priority 2
associate ccm 3 priority 3
associate ccm 4 priority 4
associate profile 2 register ASB-DR-GW04CFB
associate profile 1 register ASB-DR-GW04XCO
dspfarm profile 1 transcode
codec g711ulaw
codec g711alaw
codec g729ar8
codec g729abr8
codec g729br8
codec g729r8
maximum sessions 60
associate application SCCP
dspfarm profile 2 conference
codec g729br8
codec g729r8
codec g729abr8
codec g729ar8
codec g711alaw
codec g711ulaw
maximum conference-participants 32
maximum sessions 12
associate application SCCP
Can any one tell me how the party entrance tone happening when a confernce session open.Is it generated from the hardware Confernce resource which configured on the gateway while mixing the RTP streams ? Is there anything to do with CUCM or any service in CUCM to generate the Party entrance tone ?

Hi,
It looks like the following bug
https://tools.cisco.com/bugsearch/bug/CSCup27560/?referring_site=bugquickviewredir
MeetMe Party Entrance Tones stop working
CSCup27560
Description
Symptom:
- MeetMe party entrance tones stop getting played to participants when they join/leave
- The issue will go away for a few weeks if the CCM service is restarted, but then will come back.
- When the issue comes back, it fails 100% of the time.
Conditions:
This problem would occur when we have user having a call from user in different node initiate transfer and also initiate MeetMe and dial user in different node. When transfer completes, we will have a leak in current node MeetMe. This issue should have been there in all CCM versions.
Workaround:
Restarting the CCM service will correct the problem temporarily.
You can either try the workaround or upgrade to one of the fixed versions.
HTH
Manish

Is there a CUCM API which can be used to see what calls are in progress?

Hello All,
I am trying to build a basic monitoring application which will display a list of calls in progress along with endpoint information such as IP address etc
Is there a CUCM API which can be used to see what calls are in progress?
Thanks
Matt

Matt,
It looks like another person had a similar question before, see the following thread:
https://supportforums.cisco.com/discussion/9697836/can-use-axl-or-other-api-get-calls-progress
Also, according to the comments seen on that post, I was able to find the JTAPI developers guide, see more information below:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/jtapi_dev/8_6_1/jtapidevguide/overview.html
If this still does not satisfy your question then, the best you can do is post this inquiry on the Cisco Developer Network on the following link:
https://developer.cisco.com/site/devnet/home/index.gsp
Hope this information helps,
Marco Rojas.

My exchange administrator page is not opening

Hi guys,
I am new to exchange server. I have installed the exchange server 2013. And i have configured it. When i was trying to open my administrator page it asks for the credentials after that there's a blank page opens. I couldn't see any options.
But if i open that with another account i could see all the options. And that's not an administrator account.
I want to resolve this problem. And i wanna why this occurs.
Thanks in advance,
sudharshanan.

Hi Sudharshanan,
To understand more about the issue, I’d like to ask the following questions:
1. Is administrator page EAC or OWA ?
2. Is the page which non-admin account login EAC or OWA?
3. Is there other Exchange server in your environment?
As far as I know, we need add the suffixes about Exchange server version in the URL in a coexistence scenario:
https://CAS15-NA/ecp?ExchClientVer=15
For more information, you can refer to the following article:
http://technet.microsoft.com/en-us/library/jj150562(v=exchg.150).aspx
Thanks,
Angela Shi
TechNet Community Support

DNS change on network, but DNS not configured on CUCM. Is a rehosted license needed???

HI,
I am running CUCM 8.0.3.
We just updated part of our network and changed the DNS server.
I need/want to verify if I need to rehost my license key. My belief is “NO”…
From what I’ve read, when you change DNS, it changes the calculated value of the license MAC, and thus you need to get it rehosted.
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/cli_ref/8_0_3/cli_ref_803.html#wp39980
BUT… If DNS is not configured, and I’m not adding a new DNS into CUCM either, do I still need to get my license rehosted?
My understanding, is that since DNS is not configured and thus not changing, the calculated value of the MAC stays the same, and there is NO need to change out, or rehost, our license.
Attached is a image of “Show network eth0” from my CUCM showing DNS is not configured currently.
Note: It's just the DNS on the network that has changed. The IP address/subnet/gateway/MAC address of the CUCM is staying the same.
Thanks in advance for any insight...
-Chris

Hi Chris
Adding the DNS will lead to changing in your licensing MAC since the value is changed from null to something else.
But:
The licensing MAC is only valid if you are using a virtual environment, such as a UCS box and Exsi host on top of that . If you are using physical environment such MCS server then Licenses are bound to physical MAC and you can change the DNS without any worry for re hosting the licenses.
You can run
Show hardware
to check if you are using MCS or UCS box.
Regards
Aditya Gupta

The back, forward, reload and stop buttons are greyed out, the address bar stays blank when I go to a website and firefox loads to a blank page, not my home page. There are 3 users on this computer and it only happens on one user.

Firefox loads to a blank page, not my home page. When I click on the home button it takes me to the home page. The back, forward, refresh and stop buttons are greyed out and not usable. The webpage I am on does not show up in the address bar. If I type something into the address bar, that address stays there no matter what page I go to next.

Just upgraded to v4. It did NOT fix the problem.

Url used to show in the url box when opening from a shortcut or email, but now it's not there. If I refresh the page it is. How do I get this back the way I like it?

The url of the website that I'm visiting used to show in the url box when I opened from a shortcut or email. But not it's not there unless I refresh the page. I've looked and haven't found a way to set this so that it works like it used to. I liked being able to click in the address bar and copy the link, or even to look there and see where I am.

I'm unable to check it in safe mode because the only time it happens is when I click a link and have not firefox open. For example if I would click a link in my email right now, it would open in another tab and show the address of the link I clicked. But if I didn't not have this window open and clicked alink, it would open a new window and I wouldn't be able to see the url.
Here's a screen shot.
[http://chibitude.com/gallery/albums/userpics/10001/firefoxSSForAddressProblem.jpg firefoxSSForAddressProblem.jpg]

Have published iweb site for five years with no problems and just opened a new site and get - 404: Page not found This error is generated when there was no web page with the name you specified at the web site.-is the problem with iweb or with hosting? T

I am sorry if thie is republished-My first time doing this and I am not sure what goes where and where to hear feedback.
Have published iweb site for five years with no problems and just opened a new site and get -
404: Page not found
This error is generated when there was no web page with the name you specified at the web site.-
Troubleshooting suggestions:
Ensure the page you are linking to exists in the correct folder.
Check your file name for case sensitivity . Index.htm is not the same as index.htm!
Temporarily disable any rewrite rules by renaming your .htaccess file if it exists
is the problem with
iweb or with hosting?
One Apple tech started to fix Iweb and had to end session and the next said problem with hosting at Network Solutions as it published
to local folder. NWS has checked sttting a few times-
Any help would be extremely appreciated as trying to fix this for about five weeks
Thanks VG
<Email Edited by Host>

It's a really bad idea to post your email address - it's an invitation to spam - and I've asked the Hosts to remove it. (Even though I've now noticed you mis-spelled it! - anyway, never post your address in a forum.)
You have a site here: http://virginiagordon.com/www.virginiagordon.com/WELCOME.html
If that's not the page you are having trouble with, what is that page's URL?

Administrator page will not display

Running Windows 2003 server with Sun webserver and CFMX 6.1
Upgraded to CFMX 7. Followed instructions to install in the
default directory c:\cfmx7. Next step was to open CFMX
administrator page (http:\\127.0.0.1\cfide\administrator\index.cfm)
to run the upgrade wizard. The problem is the page opens but does
not display properly. Displays in the browser as a jumble of text.
It also shows that it is opening under version 6.1.
Any suggestions?

Sounds like perhaps the web server connector for Sun
Webserver hasn't updated itself correctly?
I remember having loads of manual hacking fun with
connectors, multiple instances back with iPlanet and early versions
of SunOne webserver 6.

CUCM OS Administration Page Not There in CUCM 8.6

Similar Messages

Maybe you are looking for