CUE 8.5.1 NME-CUE web page setup no setup initialization and error: Login to CUCME failed
When first login in via the web page. When going to Configure menu and choosing CUCME to enter it manually, I get:
Error: Login to CUCME failed with the new values. Check the new CUCME configuration and enter the correct values.
hostname: 172.23.0.1
web user name: admin
web password: cisco
Sip gateway hostname: 172.23.0.1
ccn reporting historical
database local
description "se-172-23-0-2"
end reporting
ccn subsystem sip
gateway address "172.23.0.1"
mwi sip unsolicited
end subsystem
BR2-ROUTER#sh run
Building configuration...
Current configuration : 5264 bytes
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname BR2-ROUTER
boot-start-marker
boot-end-marker
card type t1 0 3
logging message-counter syslog
logging buffered 51200 warnings
no aaa new-model
clock timezone MST -7
clock summer-time MDT recurring
network-clock-participate wic 3
dot11 syslog
ip source-route
ip cef
ip dhcp excluded-address 172.21.0.1 172.21.0.49
ip dhcp excluded-address 172.21.0.59 172.21.0.254
ip dhcp excluded-address 172.20.0.1 172.20.0.10
ip dhcp pool CME
network 172.21.0.0 255.255.255.0
option 150 ip 172.21.0.1
default-router 172.21.0.1
ip dhcp pool LAPTOPS
network 172.20.0.0 255.255.255.0
default-router 172.20.0.2
dns-server 10.10.10.1
no ip domain lookup
ip domain name wilson.com
no ipv6 cef
multilink bundle-name authenticated
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
no supplementary-service h225-notify cid-update
sip
bind control source-interface GigabitEthernet0/0.20
bind media source-interface GigabitEthernet0/0.20
registrar server expires max 600 min 60
voice register global
mode cme
source-address 172.21.0.1 port 5060
max-dn 4
max-pool 4
authenticate register
timezone 12
time-format 24
date-format YY-M-D
voicemail 3600
tftp-path flash:
create profile sync 0021447056000116
ntp-server 174.137.67.50 mode directedbroadcast
voice register dn 1
number 3006
call-forward b2bua busy 3600
call-forward b2bua mailbox 3006
call-forward b2bua noan 3600 timeout 12
name rp-sip-1-16
label SIP 511-5016
mwi
voice register pool 1
id mac FCFB.FBCA.30CE
type 7965
number 1 dn 1
dtmf-relay rtp-nte
username 3006 password cisco
description 687-3006
codec g711ulaw
voice-card 0
username admin privilege 15 secret 5 $1$..D.$orbTsqgPSvNkMpfjjkg5q.
archive
log config
hidekeys
controller T1 0/3/0
cablelength long 0db
controller T1 0/3/1
cablelength long 0db
interface Loopback0
ip address 172.23.0.1 255.255.255.252
ip ospf network point-to-point
interface GigabitEthernet0/0
description $ETH-LAN$$ETH-SW-LAUNCH$$INTF-INFO-GE 0/0$
no ip address
duplex auto
speed auto
interface GigabitEthernet0/0.10
encapsulation dot1Q 10 native
ip address 172.20.0.2 255.255.255.0
interface GigabitEthernet0/0.20
encapsulation dot1Q 20
ip address 172.21.0.1 255.255.255.0
interface GigabitEthernet0/0.30
encapsulation dot1Q 30
ip address 172.22.0.1 255.255.255.0
interface GigabitEthernet0/1
ip address 192.168.1.138 255.255.252.0
duplex auto
speed auto
interface Integrated-Service-Engine1/0
ip unnumbered Loopback0
service-module ip address 172.23.0.2 255.255.255.252
service-module ip default-gateway 172.23.0.1
no keepalive
ip forward-protocol nd
ip route 172.23.0.2 255.255.255.255 Integrated-Service-Engine1/0
ip http server
ip http access-class 23
ip http authentication local
no ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip http path flash:/gui
access-list 23 permit 10.10.10.0 0.0.0.7
nls resp-timeout 1
cpd cr-id 1
control-plane
ccm-manager fax protocol cisco
mgcp fax t38 ecm
dial-peer voice 3600 voip
destination-pattern 36..
session protocol sipv2
session target ipv4:192.168.1.144
dtmf-relay sip-notify
codec g711ulaw
no vad
sip-ua
retry invite 3
timers trying 400
mwi-server ipv4:192.168.1.144 expires 3600 port 5060 transport udp
gatekeeper
shutdown
telephony-service
no auto-reg-ephone
em logout 0:0 0:0 0:0
max-ephones 10
max-dn 10 no-reg both
ip source-address 172.23.0.1 port 2000
voicemail 3600
max-conferences 8 gain -6
call-forward pattern .T
web admin system name admin password cisco
dn-webedit
transfer-system full-consult
transfer-pattern .T
create cnf-files version-stamp Jan 01 2002 00:00:00
ephone-dn 1
number 3007
description 687-9898-3007
name Vatos locos
call-forward busy 3600
call-forward noan 3600 timeout 12
ephone-dn 2
number 3008
description 687-9898-3008
name Vatos locos2
call-forward busy 3600
call-forward noan 3600 timeout 12
ephone-dn 3 octo-line
number 3009
huntstop channel 6
ephone-dn 4
number 7999....
mwi on
ephone-dn 5
number 7998....
mwi off
ephone 1
device-security-mode none
description TESTTTTT
mac-address FCFB.FBCA.3406
max-calls-per-button 5
busy-trigger-per-button 4
type 7965
button 1:1 2:3
ephone 2
device-security-mode none
description TESTTTTT
mac-address FCFB.FBCA.3030
max-calls-per-button 4
busy-trigger-per-button 3
type 7965
button 1:2 2:3
line con 0
exec-timeout 0 0
logging synchronous
login local
line aux 0
line 66
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120
line vty 0 4
access-class 23 in
privilege level 15
login local
transport input telnet
line vty 5 15
access-class 23 in
privilege level 15
login local
transport input telnet
scheduler allocate 20000 1000
ntp server 174.137.67.50
end
BR2-ROUTER#
Apr 12 2011 16:23:12 gui/admin_user.js
122 585532 Mar 30 2011 05:48:46 phone/7975/cnu75.8-3-2-27.sbn
123 2453636 Mar 30 2011 05:48:56 phone/7975/cvm75sccp.8-3-2-27.sbn
124 326315 Mar 30 2011 05:48:58 phone/7975/dsp75.8-3-2-27.sbn
125 557786 Mar 30 2011 05:49:00 phone/7975/jar75sccp.8-3-2-27.sbn
126 638 Mar 30 2011 05:49:02 phone/7975/SCCP75.8-3-3S.loads
127 642 Mar 30 2011 05:49:02 phone/7975/term75.default.loads
128 0 Mar 30 2011 05:49:02 phone/7941-7961
129 2494499 Mar 30 2011 05:49:12 phone/7941-7961/apps41.8-3-2-27.sbn
130 547146 Mar 30 2011 05:49:16 phone/7941-7961/cnu41.8-3-2-27.sbn
131 2340 Apr 02 2011 03:55:02 April012011.txt
132 3579 Apr 12 2011 03:52:42 softkeyDefault_kpml.xml
133 69 Apr 12 2011 03:52:40 syncinfo.xml
134 2682 Apr 12 2011 03:52:42 SEPFCFBFBCA30CE.cnf.xml
135 1882 Apr 12 2011 03:52:42 SIPDefault.cnf
136 3613 Apr 12 2011 03:52:42 softkeyDefault.xml
137 3987 Apr 12 2011 16:23:10 gui/admin_user.html
138 1029 Apr 12 2011 16:23:14 gui/CiscoLogo.gif
139 617 Apr 12 2011 16:23:14 gui/CME_GUI_README.TXT
140 953 Apr 12 2011 16:23:14 gui/Delete.gif
141 16344 Apr 12 2011 16:23:14 gui/dom.js
142 864 Apr 12 2011 16:23:16 gui/downarrow.gif
143 6146 Apr 12 2011 16:23:16 gui/ephone_admin.html
144 4558 Apr 12 2011 16:23:16 gui/logohome.gif
145 3866 Apr 12 2011 16:23:16 gui/normal_user.html
146 78428 Apr 12 2011 16:23:18 gui/normal_user.js
147 1347 Apr 12 2011 16:23:18 gui/Plus.gif
148 843 Apr 12 2011 16:23:18 gui/sxiconad.gif
149 174 Apr 12 2011 16:23:18 gui/Tab.gif
150 2431 Apr 12 2011 16:23:20 gui/telephony_service.html
151 870 Apr 12 2011 16:23:20 gui/uparrow.gif
152 9968 Apr 12 2011 16:23:20 gui/xml-test.html
153 3412 Apr 12 2011 16:23:20 gui/xml.template
Fixed. Routing issue:
Routing issue:
ip http access-class 23 !!!!!! Preconfigured from Factory
ip http authentication local
no ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip http path flash:/gui
access-list 23 permit 10.10.10.0 0.0.0.7 !!!!!! Preconfigured from Factory
To fix
No ip http access-class 23
Similar Messages
-
When i hit the back button, the web page can not reload ! and this button is disable ! I'm using Ubuntu 10.04 Lucid ! and I've just upgrade to firefox 4 RC. Sorry for my poor English skill !
In Firefox 23 versions and later the keyword.URL pref is no longer supported and it is no longer possible to specify the search engine for the location bar via the keyword.URL pref.<br />
The search engine that is used on the location bar and on the about:home page is the search engine that is selected in the search Bar on the Navigation Toolbar.<br />
Current Firefox versions do not update the about:home home page until you refresh the page (future versions will do this automatically without a refresh) and that is what happens if you use the Back key.
You can install the Keyword Search extension to specify with search engine to use for the location bar and which search engine to use for the about:home page via the Options/Preferences windows of this extension, accessible via the about:addons page.
* Keyword Search: https://addons.mozilla.org/firefox/addon/keyword-search/ -
Unfortunately when I click on the Dreamweaver icon to open all that happens is the Dreamweaver logo flashes on and off and nothing more happens. In addition looking at my folders all the web pages in Dreamweaver have gone and all that I can do is open them in a browser, Runs on XP?
Unfortunately when I click on the Dreamweaver icon to open all that happens is the Dreamweaver logo flashes on and off and nothing more happens.
When DW starts acting weird, the first thing to try is Deleting Corrupted Cache. Be sure to turn on Hidden files & folders in your Windows Explorer.
http://forums.adobe.com/thread/494811
If that doesn't help, try Restore Preferences.
http://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs4-cs5.html
http://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs6-cc.html
If all else fails, use the CS Cleaner Tools below followed by a software re-install.
http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
Nancy O. -
Sometimes a web page appears with only text and no picures. It is not always the same site and does not always happen. If I switch to Explorer for the same web site it always works
Thank you, it worked with just F5. I don't know whether CTRL + F5 would work because the problem has not come back yet!
-
CUE 8.6.10 error "login as administrator failed" message
Hi guys,
i have a new router with CUE 8.6.10 am trying to run the wizard and an error appears " "login as administrator failed"
the username and password is 100% correct also the below commands exists in my configuration
ip http server
ip http authentication local
ip http secure-server
ip http path flash:
telephony-service
"web admin system name admin password xxxx
dn-webedit
time-webedit
i tried a lot of things with no luck
Note GUI files exists on the router flashThe stuff under telephony-service is for CME, not for CUE
Create a normal user (username test123 privilege 15 secret test123) use this account to login to the CLI of CUE (service-module isM 0/0 session)
Then create an administrative user and use this one to login to the CUE GUI -
I am unable to print anything from an internet web page. I continually get "printer not activated, error code- 30" followed by "An unknown error occurred while printing". I can copy the material from the web page, place into a Word document and then print. This just started yesterday and I have no idea why. Would appreciate your advice!
See this:
[http://kb.mozillazine.org/Problems_printing_web_pages#Prints_to_a_small_portion_of_the_page] -
When I try to print from web page I get a dialogue box "Printer not activated - error code 30" followed by a dialogue box "An unknown error occurred while printing". The printer works on websites when I use Internet Explorer. Also, if I copy the web page and paste it into a Word document, I can print a copy. This issue just started this week; I have not encountered this problem prior to this week. Please advise.
What does that error message say?
See this: http://kb.mozillazine.org/Problems_printing_web_pages -
when i try to open a web page, a blue screen appears - message says - sarfari cannot open the page because it is not connected to the internet. i have an iphone - no proble and a laptop - no problem as well.
what is wrong?There are other things that need attention:
Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
*Shockwave Flash 10.0 r32
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/ -
When we start the internet or navigate to a new page, a new tab opens with the following alert: "The URL is not valid and cannot be loaded." We "x" out of it, but a new tab, with the same alert appears. The problem occurs again when we try to navigate to another web page. A real nuisance. We've scanned the computer but found nothing but Adware cookies.
== This happened ==
Every time Firefox opened
== 5/20/10Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit") -
Is it necessary to have both a folder full of files and a individual file appear whenever I want to download a complete web page in firefox. This is not the case in safari. It is inconvenient to have to keep two icons for every web page, and if I put the file icon into the folder of other files that download with each web page it is not a simple click of an icon to open the page offline. I have to go into the folder and find the file icon. Am I missing some setting to make this work as easily in firefox as it does in safari? Thanks.
Safari use webarchive format. http://en.wikipedia.org/wiki/Webarchive
Firefox doesn't include a similar feature, but a feature like that can be added via either the MAF extension or the UnMHT extension. <br />
https://addons.mozilla.org/en-US/firefox/addon/mozilla-archive-format/?src=search <br />
https://addons.mozilla.org/en-US/firefox/addon/unmht/?src=search -
A couple upgrades ago, I noticed that Firefox wouldn't boot properly. According to "Task Mgr.", it would load partially with a "*32" after it's name in the listing, but not enough to display a window on screen. After ending the process, and restarting the program again it would usually boot fully. (not always, but usually) The "*32" confuses me as I run a 64bit Windows 7 system and during installation I was sure that I saw mention of a 64bit program being installed. Apparently, after the last upgrade, that issue was resolved; but Task Mgr. still lists the program with a "*32" after it.
The issue now at hand is that Firefox won't save images online or save web pages. I'll right-click and select "save image as" or "save page as" and... nothing. No box appears prompting me to name a file or designate a location to save that file to. Nor does anything happen when I use the "File" menu for the same function either. This is, to say the least, is very frustrating. There may be other things not functioning that I'm not currently aware of, but I haven't been able to or had time to do a complete check of the functionality of the program. I've never had issues of any significance with Firefox in the past. It's always been very reliable for me, so I'm hoping there's a relatively quick fix that I simply haven't been made aware of yet...
Thank you for your suggestions and time looking into this matter...
Curtis LaippleIt probably will take a little time to work through this troubleshooting article, but hopefully you will get a complete solution: [[What to do if you can't download or save files]].
Regarding the *32, I see the same thing on Win 7 Pro x64. No worries. Firefox for Windows is compiled only as a 32-bit application. -
FrameMaker 11 on "Start New, Linked Web Page" in HTML setup
FrameMaker 11 doesn't let me use certain paragraph tags to save certain FM files into separate HTML files. After I checked the box "Start New, Linked Web Page", that item has a Y in the Reference Pages for new web page, but it was being switched back to N during the process of Save As HTML, right in front me. It worked for some other Paragraph Tags, however. Would someone please tell what I missed? Thanks!!
That's ok. I had the work-around by using the paragraph tag that worked,
so it's working now, although I'm still puzzled about the other tag.
Thank you anyway!
On Mon, Mar 10, 2014 at 8:48 AM, Jeff_Coatsworth -
How can i call Web page from my Forms 6 and Some other doubts.
Dear friends,
I am having the following questions and doubts ..If you can share some information with me it will be greatly useful to me..
Q1. I am using Dev Forms 6i. Can we call a Web Page form from the Developer Form directly with the press of a button..(eg. When button Pressed trigger..? )If so, what the requirement to do so. My database is Oracle 8i
Q2. How can we send email from a Form picking the address from our Oracle Database..? I have installed only Oracle 8i and Forms & Reports 6i. Anymore has to be installed for this work?
Q3. Do you know any GIS package that can be integrated with Oracle so that we can know the Latitude and Longtude of a lcation if we give an address..? and what can be done for this purpose.
please revert with the info...
Sincerly
Sajith
12100 Beech Forest Road,
Laurel, MD 20708, USA
Phone : (301) 497-5816
Cell : (301) 693-6767
Email : [email protected]Here is code I used to send an email from Form 6.0 through Outlook 2000 on a PC. I don't know the answer to you rother questions.
PROCEDURE maily (p_to_address VARCHAR2, p_cc_address VARCHAR2 DEFAULT NULL, p_subject VARCHAR2, p_message VARCHAR2) IS
objOutlook OLE2.OBJ_TYPE;
objMail OLE2.OBJ_TYPE;
objArg OLE2.LIST_TYPE;
BEGIN
objOutlook := OLE2.CREATE_OBJ('Outlook.Application');
objarg := OLE2.CREATE_ARGLIST;
OLE2.ADD_ARG(objarg,0);
objMail := OLE2.INVOKE_OBJ(objOutlook,'CreateItem',objarg);
OLE2.DESTROY_ARGLIST(objarg);
OLE2.SET_PROPERTY(objmail,'To',p_to_address);
OLE2.SET_PROPERTY(objmail,'Cc',p_cc_address);
OLE2.SET_PROPERTY(objmail,'Subject',p_subject);
OLE2.SET_PROPERTY(objmail,'Body',p_message);
OLE2.INVOKE(objmail,'Send');//Use display to display the email instead of sending it, or save to save in the outbox
OLE2.RELEASE_OBJ(objmail);
OLE2.RELEASE_OBJ(objOutlook);
END; -
TS3274 load web page then screen goes black and reboots
hit safari icon.then connect to a web page then all of the sudden the screen shades out and reboots the unit
Try the following:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings>Safari and clear History, Cookies and Data -
This error message recently started popping up periodically on web pages that seem to have graphics or photos. There have been recent Adobe updates, but I can't verify which ones and whether they are the issue. On the other hand a recent Firefox update 7.0.1 indicated it was incompatible with a number of plug-ins? Could that be the source. Incidentally after I receive the message: it comes on twice, I am returned to a previous screen without further problem.
Please see solution in http://kb.mozillazine.org/Problematic_extensions
for "McAfee Site Advisor".
(Windows): For best results you should uninstall '''McAfee Site Advisor''' from Control Panel > add/change programs (Programs and Features). Reboot the system. Then Reinstall from http://www.siteadvisor.com/ and reboot the system. When installing refuse other suggested (crapware) applications.
<br><small>Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.</small>
Maybe you are looking for
-
Campaign output to BP with multiple email addresses
Hi all, I noticed that within Campaign Execution the output to email channel will only send an output (mail form) to the business partners standard email address. Question is: how to send an output to ALL email addresses stored within a business part
-
Recently I compared the sound quality of a music track in several ways: 1. Original CD played directly in Bose Lifestyle. 2. Same track stored as AIFF on MacBook streamed with Apple TV with TosLink Cable. 3. Same track stored as AIFF on MacBook strea
-
My monitor (HPw2207h) will not display anything....the screen is dark, and when I turn on the computer it lightens slightly and then the message "monitor going to sleep" appears. I hooked up the monitor to another computer and it works fine, so I a
-
How get DOCTYPE name when parsing XML Doc?
My XML document has this: <!DOCTYPE Users SYSTEM "Users.dtd" []> So the name of this document's type is "Users", i.e. it is a Users document. However, I cannot figure out how to get that during parsing! I have set the following (and implemented all t
-
The application.log file shows repeated 404 errors for files that have been off the server for ages. Also 404 errors for files that are right were they are supposed to be. It's almost like a script is running somewhere to search for these pages, but