Cumulative value with Agg. reference char.

hi,
  If you go to the display of the key figure, in the second tab Aggregation, how should we use Agg. reference char with Cumulative value radio button checked.
I read SAP help but could not get it.Please explain with examples.
Thanks in advance.

Hi
Aggregation :
This flied is the standard aggregation with three options - Min,Max,Sum
Exception Aggregation :
This field determines how the KF is aggregated in the BEx in relation to the
exception characteristic.
The key figure ‘Number of Employees’ can be aggregated using the ref .characteristic ‘Cost Center’ (Non-time characteristic).
Here you would determine a time characteristic as an exception characteristic with, for example, the aggregation ‘last value’.
For Non Cumulative values:
If you want to aggregate the KF value in business explorer using the non time characteristics like 0person.... then your standard aggrgation field should have summation value
and if you want to aggregate the KF value in the  business explorer using the time char.
like 0calmonth, then your exception aggregation field should have last,average.... values (not equal to summation)
Assign points if helpful.
Thanks

Similar Messages

  • Adding attributes to an infoobject with a reference char.

    Hello experts,
    We want to add some new attributes to our custom infoobject that was created with reference char. = 0CUSTOMER.
    Is this possible? These new fields will be populated from R3, will the user exit for master data, EXIT_SAPLRSAP_002, need to be enhanced for datasource 0CUSTOMER_ATTR?
    Thanks in advance,
    Inma

    Hi  inma moya,
    You can not enhance any reference characteristics, as this characteristics takes reference table of source tables(0customer) only.
    If you want to enhance these characteristics, you need to enhance 0CUSTOMER ONLY.
    Then enhance objects will be automatically reflected into reference objects.
    Hope it Helps
    Srini
    [Dont forget to close the call by assigning poings.... - Food for Points: Make a Difference through Community Contribution!|https://www.sdn.sap.com/irj/sdn/index?rid=/webcontent/uuid/007928c5-c4ef-2a10-d9a3-8109ae621a82]

  • Cumulated values with 0FYTCFP variable

    Hi All,
    Can anyone write me how to use 0FYTCFP variable to design query with value of current period and cumulated values of previous periods. I tried to use this variable with 0P_FPER to which I manually enter current period, but BEx returns a message "The variable 0FYTCFP couldn't be repalced"
    Thanks for help

    I can, but I want to use on input variable in for example '010.2005' way and basing on this value dynamically specify the 001.2005-010.2005 period.
    Regards,
    Maciek

  • KF creation  - Non-cumulative value with NCUM value change - option

    What is the use above option in the KF creation?
    Thanks

    Hi,
    A non-cumulative is a non-aggregating key figure on the level of one or more objects, which is always displayed in relation to time. Examples of non-cumulatives include headcount, account balance and material inventory.
    If you use non-cumulative key figures, an absolute non-cumulative value (the marker) and all non-cumulative value changes are saved in the fact table of the InfoCube. In this way, the retention and volume of data in the data loading process is optimized. A data record is then only loaded to the InfoCube if a non-cumulative changes because of a transaction. Non-cumulatives can then be evaluated at any time in queries, using non-cumulative key figures.
    Pls chk this links;
    http://sap.seo-gym.com/inventory.pdf
    http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/da1640dc88e769e10000000a155106/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62ebe07211d2acb80000e829fbfe/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/da1640dc88e769e10000000a155106/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62f8e07211d2acb80000e829fbfe/frameset.htm
    Reagrds
    CSM Reddy

  • Non-cumulative value KF

    Hi:
    I have given the Aggregation as SUM  and the Excepiton Aggregation as Last Value for a non-cumulative KF Quantity Total Stock  for Inventory. I am using Non-cumulative value with in- Receipt Quantity Total Stock and out-flow Issue Quantity Total Stock. Then I can calculate Quantity Total Stock  in Query.
    But I have another requirement, I want to a KF to count  0Material  whose Quantity Total Stock not equal 0.  In fact, for a Non-cumulative value, the Aggregation reference char of  KF Quantity Total Stock   is 0calday, but what I want is 0Material.  How could I create such KF?
    Many thanks in Advance!
    Points will be assigned!

    Hi,
    The basic purpose of Non-cumulatives is to get the values for them depending upon the Time Characterestics alone and not on any other characterestics. As far as I know you cant use 0MATERIAL as the aggregation reference Char.

  • Inventory Management (Non-cumulative values)

    Dear experts,
    I want to extract inventory data from 2LIS_03_BF.
    How do I have to configure the Key figures; for example: 0VALSTCKQTY. Is there a need to use Non-cumulative value with in- and outflow as in Content.
    Which other possibilities exist?
    After InfoObject config. - what are the exact next steps?
    Do I load data from the 3 DataSources 2LIS_03_BX, 2LIS_03_BF and 2LIS_03_UM into one DSO first and then into one cube or do I have to split?
    I dont want to use the BC data flow.
    Thanks for your advice.
    Patrick

    hi,
    Please search the Forum for this, this has been discussed many times.
    regards,
    Arvind.

  • Issue with Cumulative Value in BW Query

    Hi
    Here am trying to calculate a percentage over the two key figures which has the cumulative check in Calculation
    but in result the percentage is appearing with non-cumulative values though am selecting the cumulative kf in formula.
    find below the example :
    C-OQTY --> Cumulative Ord Qty  -- This is based on OQTY wherein the properties under Calculation i haved the Cumulated
    C-TOQTY-->Cumulative Total Ord Qty --This is based on TOQTY wherein the properties under Calculation i haved the Cumulated
    OQTY--> Order Qty
    TOQTY--> Total Order Qty
    C-OQTY/C-TOQTY *100
    Calendar Day     C-OQTY     C-TOQTY  OQTY      TOQTY       %
    2008.02.01     115     115     115     115     100.00
    2008.02.02     115     197          82     
    2008.02.04     158     381     43     184     23.37
    2008.02.05     287     596     129     215     60.00
    As you all can see that the % is showing the value as OQTY/TOQTY*100  Instead of C-OQTY/C-TOQTY *100
    Need help
    Thanks in Advance
    Cheers
    Taher

    Thanks for your quick replay,
    well am using "Use standard Aggregation" could you pls give me little more details abt before Before aggregation concept..
    which option  to choose in aggregaion..
    Cheers
    Taher

  • KE28 with" Copy Characteristic Value with Reference Data" doesn't work

    Hi experts:
    We need to make a top-down setting the processing option 'Copy Characteristic Value with Reference Data'. We have the following source data:
    Customer Business Unit  Value field.
    6        #              100
    On the other hand, we have plan data as reference data:
    Customer Business Unit  Value field.
           A              40
           C              40
           D              20
    We need to run a top-down to distribute from client to Business Unit but copying client of reference data. Then, we set 'Copy Characteristic Value with Reference Data' and, in the selection criteria we set '*' for customer.
    After running, the result is that the system can find 1 sender and 3 receivers. It is exactly what we are expecting. However, program doesn't make individual items and anything is distributed.
    We have found notes 1086282 and 1273924 but the result is the same after implementing these notes.
    Thanks in advance for your help.
    Best regards
    Jose

    There are some restrictions on the XML Schema format that you can report off of in Crystal Reports.
    If you're using the ODBC XML driver, you may find this of relevance:
    [http://resources.businessobjects.com/support/communitycs/TechnicalPapers/cr_xml_data_sources.pdf|http://resources.businessobjects.com/support/communitycs/TechnicalPapers/cr_xml_data_sources.pdf]
    and if you're using the native XML driver, the following gives a guide for the accepted formats:
    [http://resources.businessobjects.com/support/communitycs/TechnicalPapers/cr_xi_native_xml_driver.pdf|http://resources.businessobjects.com/support/communitycs/TechnicalPapers/cr_xi_native_xml_driver.pdf]
    Sincerely,
    Ted Ueda

  • How to archive info cube with non-cumulatives values ??

    Dear All,
    Would you like kindly help me please .. ??
    It's regarding archiving, but right now archiving in Info Cube with cumulative values like Info cube movement.
    Because it's rather different than other cube due it has marker ..
    I've already read from article discussing about archiving, it said i must archive the data before the marker (it's if i'm not having incorrect understanding). But right now, i don't know where the marker is ??
    My questions are:
    1. Could somebody help me please giving me explanation regarding it ??
    2. If don't mind, would you like to explain me step-by-step how to archive it ??
    3. Is my comprehension above correct that we have to archive data before the marker ?? If yes, how can i know where the marker is (What date does the marker point to ?? ) ??
    Best regards,,
    Niel.

    Hi
    May be helpful to you
    Step by step https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0974515-7225-2b10-14a1-f5abba35b19f
    Data Archiving Part 1 – A Tour d’Horizon
    http://www.sap-press.com/product.cfm?account=&product=H956
    Technical Setting for Data Archiving
    Hope it helps

  • Non cumulative with non cumulative value change

    hi,
    can any one tell the concept of non cumulative with non cumulative value change with an example with numbers,i am bit confused .
    like we have for non *** inflow and outflow- stocks inflow and outflow so non *** is based on inflow and inflow.
    in the same way any example for above concept

    Hi Venkat,
    If I under stand your question correctly you wish to have an example of where non cumulative values are used and you have given the value of stock? If so here is an example with figures
    So you would do an initial load loading the opening balances of Stock.
    Say material number 12345 = 100 units
    After that, only movements will be posted so Stock will either increase or decrease depending on what image is posted via the change log.
    So there will be a purchase of material 12345 for 50 units so now the balance of material is 150.
    But then you could use or sell 70 units of material 12345 so you stock value would be 80 units
    I hope this makes sense and this is an example that you are after if not please let me know and I'm happy to help
    Regards
    Ben
    PS assign points if useful

  • POC with Cumulative values linked to Milestones

    Hi Everybody,
    Our structure is like
    Project Defection
    WBS
    Milestones & We manually confirm the milestones. basing on (percentage of completion and invoice percentage)
    The requirement is like; whatever the % we enter in the milestone screen u201Cpercentage of completionu201D it should be captured in WBS POC field (with cumulative values)
    Pl. advises do we have any std.process or we need to go for any development.
    Regards,

    logically these are different values and have different usage - if I have a milestone of 40% completed it does not mean that 40% of work is complete - hence I would have thought that SAP have rightly not provided any standard provision for this
    you could however achieve this by development if you still require to use this

  • Non-cumulative values do not update on report

    hi,
    I have created cube with non-cumulatives but on reports they are not updated. I can see values for inflow but not for non-cumul itself.
    Does somebody knows what could be wrong?
    Regards,
    Andrzej

    hi,
    what do you mean by date restriction?
    Time reference char is 0calday, I have 0calday in validity table and tine char in query are 0calday and 0calmonth. I do not use restricted KFs in query.
    Regards,
    Andrzej

  • Non-cumulative value Parameters EFFECT

    Hi,
    I am customizing the 0IC_C03 inventory cube to get to the reports we need. But the query performance is extremly slow. We do not have BI Acceleratior, but aggregates are build for my query. So I duplicated the cube and removed 0MATERIAL from the non-cumulative parameter value for the cube, and have only 0CALDAY and 0PLANT. When I run the same query it runs way faster than before. All I did was remove the 0MATERIAL as one of the possible parameters.
    I would like to know the role of these parameters and the effect of not having 0MATERIAL as one of the parameter value.
    Anyone know why the performance difference?
    Also looking at the /BIC/ZL* cube with 0MATERIAL, the record counts are as high the material count. Now after removing the same table has lot less records.
    Could anyone explain about this?
    Thanks,
    Arthur.

    Hi,
    The basic purpose of Non-cumulatives is to get the values for them depending upon the Time Characterestics alone and not on any other characterestics. As far as I know you cant use 0MATERIAL as the aggregation reference Char.

  • User wants to get the cumulative values based on his input.

    Hi
    I am working one FI Report; the out put values are Cumulative values for Current, Previous years. I developed and it fetches the data last 3 years Cumulative year’s data without any input FYMonth based on SAPexits and varible offsets. But user wants to put Fiscal year Month as input. So he wants get the cumulative values based on his input. For example, If his input SEP'2005(062005), Then Query gives the Output Cumulative Value (I.e., Sum of Total values of Form APR'2005 to SEP'2005)
    Please provide the solution…
    Thanks
    Mannev

    Mannev,
    You can try doing this.
    1. If the user input is fiscal period(2005006) , you can create a customer exit variable which will take the user value (i_step =2), and change the variable value to 20005001. (this is a simple code where tye last 2 digits are replaced by 01).
    if the user is entering calmonth, you can use FM - DATE_TO_PERIOD_CONVERT, to convert the month to fiscal period.
    2. You can create a rkf with restrictions on time char based on the customer exit variable and the user entered variable.
    -Saket

  • Non-cumulative Values not showing in Inventory Management Queries

    Hi:
    Has anyone had a problem with the new version and Non-cumulative key figures not showing up in Bex for Inventory Managemet reports? Specifically, they showed and validated back to ECC for our Development and QA boxes but now in our Regression box they are all showing zeros. Our Cumulative values are all showing correctly still within the Regression box. For example, Total Receipts and Total Issues are correctly poplating values but Total Stock is not.
    I have checked and validate that the configuration in the Regression box matches or Dev and QA box.

    Found the problem.  It had to do with the compression variant in the delta process chain.  The compression was set to 'no marker update'.  Since we only started receiving measureable deltas in or regression box this is where the incorrect setting showed up.  Reinitalized and the deltas are working correctly now.

Maybe you are looking for