Cursor doesn't change until mouse move

I think this is a bug but when I change several topics and then do a save all, a popup appears asking to apply to all topics created from a master page or this topic only. When this happens I click ok and the popup goes away and the cursor changes to an hourglass. Then the next topic popup comes again and the cursor will remain an hour glass until the mouse is moved. You think the system is busy but in reality it is waiting for you to click ok or move the mouse. If you move the mouse, the cursor changes to an arrow like normal.
This happens every time in my project so either there is something special about my project or it may be a bug so if you get the hour glass try moving the mouse.
dv

Hi there
You should consider reporting as a bug. (link is always in my sig)
However, your post causes me to ask the following. Why are you making changes that cause this to happen? Normally you create things from a Master Page so you have more control. I believe the only time you see this particular issue erupt is when you have created a Header and/or Footer that are associated with a Master Page, then you decide to change the Header or Footer in a topic. RoboHelp sees that and asks if you want to update just that topic (and disassociate the topic from the Master Page) or if you want all other topics to be updated as a result of the change.
Hopefully this helps a bit... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Similar Messages

Set Busy cursor doesn't change until mouse is moved

Hello,
When I use the "Set Busy.vi" to control mouse cursor appearance, it doesn't actually change until the pointer is moved. Similarly, the "Unset Busy.vi" doesn't change appearance until the mouse is moved. Is there a way to fix this?
Thanks,
-Dave

Hi Dave,
I've tried this and it seems to work okay for me... do you have any example code you can post? Which version of LabView are you using?
Charlie Rodway
Test Design Engineer
Rolls-Royce Controls and Data Services Ltd

Cursor doesn't change to bush when using brush adjustment

I'm running into an issue when I using the brush adjustment in LR 5.5. The cursor doesn't change from the pointer to the brush cursor. Does any one have a fix for this? I'm running the latest version of LR. I have an 2011 iMac running OS 10.9.4 Any help to solve this issue would be greatly appreciated.

Same thing here. I also find that Apple Mail is the most frequent offender. Still, like you have mentioned, it is not limited just to mail. This was not a problem for me in Mountain Lion. However, I am noticing that this is a problem for users as far back as 2006 and for every OS release since. It seems that this is not a OS- specific issue. Or if it is, Apple hasnt addressed it in 6 OS releases. This seems like it would be an easy fix. Pretty annoying that it doesnt "just work," right?

Firefox stops upload or download until mouse moves

FF7.0.1 on Win7 Pro-64
Another strange behaviour: sometimes FF stops transporting (uploading or downloading) until mouse is moved.
Very strange is, that it will do to move the mouse hovering over any FF window or FF download window, even WHILE ANOTHER (non-FF-)WINDOW IS THE ACTIVE WINDOW and in front of a FF window.
This doesn't depend on specific sites and happens on different sites. And it happens only once in a while, once-twice-three times a day.
Any idea???

Start Firefox in [[Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

I noticed in Firefox that my cursor doesn't change to let me know a button is clickable (button mode) in flash sites, why?

I noticed that in the new version of Firefox that my cursor doesn't indicate when a button, in flash, is clickable. In other browsers, the cursor changes from the standard arrow to the hand with a finger.

I noticed that in the new version of Firefox that my cursor doesn't indicate when a button, in flash, is clickable. In other browsers, the cursor changes from the standard arrow to the hand with a finger.

Default audio device doesn't change until restart

I have speakers and usb headphones, I had no problem switching which device is used, but now when I change the default device a restart is needed to actually change where the sound comes from. This is extremely annoying. Using Windows 8.1, don't think
it matters ehat the headphones are, cause they work fine, but - logitech g930. So to sum - i change the default device, it gets the green thick next to it, but sound still comes from the previous one until pc is restarted, it used to work fine on the same
windows, maybe some update changed it.

Open Audio Midi Setup, Click the Plus button. Witch should add "Aggregate Device" to the Audio Device List. Click on "Aggregate Device." On the right hand side it should list all the audio device you can use for the Aggregate Device, if US-200 is on the list, check the check box to the left of "US-200".
Then click on the gear on the left hand side of the window, chose "use this device for sound out".
If you still can't get it to work, you might want to check to see if your mac is in 32 or 64 bit mode. If you want to check: Apple menu, about this mac, more info button, from the left column click on the word "Software." On the right column there should be a line that says "64-bit Kernel and Extensions:". witch should say yes or no.
the reason to check, would be some drivers only work in 32-bit mode.

SlideShowpro, custom event, cursor doesn't change in hand

I using the SSP component, and I scripted a custom event for clicking on loaded images to go to the next image.
This is working very fine except for that the hand-cursor won't show up on roll-over on the image.
I'd like this to happen, but dont't know how to.
This is ths scrip I use now:
listenerObject = new Object();
listenerObject.onImageClick = function(eventObject):Void {
my_ssp.nextImage();
my_ssp.addEventListener("onImageClick", listenerObject);
I tried to add this, but with no succes (mayby on the wrong place?)
my_ssp.useHandCursor = true;

You need to have the invisible button take over the role that your listener played, getting rid of the listener.
invisibleBtn.onRelease = function(){
my_ssp.nextImage();

Firefox 4.0.1 won't load pages until I move the cursor

Whenever I click on any link, the new page doesn't appear until I move the cursor around. If it takes a long time to load, I have to do this multiple times. This sounds like a minor detail, but it's a pain in the ass. Also, it means that it doesn't automatically check for new emails in gmail, so I don't know if I have a new email unless I check it manually.

Start Firefox in [[Safe Mode]] to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
In Firefox 4 you can use one of these to start in [[Safe mode]]:
* Help > Restart with Add-ons Disabled
* Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

After upgrading my iPhone 3GS to Version 4.3.5 the screen cannot change when I move it horizontally. Why? Can anybody help me?

I got my first software update few days ago to a newer version 4.3.5. And i find a change that the screen doesn't change while i move my phone horizontally. It is now act like fixed. When I used to see my album I feel bad and Im searching a way to fix this problem. Please help me by knowing me what is wrong to me? I need help immediately.

This might also help http://manuals.info.apple.com/enUS/iPhone_iOS4_UserGuide.pdf - Page 32

Dynamically register event mouse move

I try to understand dynamically register for events.
In this NI example of "Dynamically register for events.vi", the first register events (outside the while loop), if I change the top item "mouse move" to something else, I cannot select "mouse move" event anymore, in the pull down arrow, there is not a "mouse move" as a selectable item.
Can anybody explain this? I have to close VI without saving.
When I make change to the event, in the event structure, there will be a case "unknown event" displayed.
My other question is: how does the program knows the difference between mouse outside the picture control?
I know that when I press the mouse button down on the picture then the iteration starts to count, I just don't understand how the program knows the difference, it is not obvious to me.
regards

You should try working with standard events before using dynamic events.
As for your questions:
The dynamic events available in the event structure are determined by the dynamic event terminal (inside the right red square in the image below). When you change the Mouse Move event, it is no longer available and you have to configure the event structure to use another event.
The Mouse Up and Mouse Down? events are registered for all the controls (left red square), so clicking on any control would generate those events.
There should be a tutorial on this site about using dynamic events. You can use the search engine to find it. Also, reading the LabVIEW help on this is a good idea.
To learn more about LabVIEW, I suggest you try searching this site and google for LabVIEW tutorials. Here, here, here, here and here are a few you can start with and here are some tutorial videos. You can also contact your local NI office and join one of their courses.
In addition, I suggest you read the LabVIEW style guide and the LabVIEW user manual (Help>>Search the LabVIEW Bookshelf).
Try to take over the world!
Attachments:
Dynamically Register for Events.png ‏6 KB

How to change the mouse cursor icon type when mouse moves out of client area ( propertysheet) WTL?

I got stuck with an issue in property sheet .I want to load different cursor when the mouse position is within the client area and load another when moves out of the client area.
In the porpetysheet I added four page. In the first page when I click next I am loading cursor of IDC_WAIT type and loading IDC_ARROW when the mouse moves out of the client area.
In the page class I triggered the event for WM_MOUSEMOVE as follow:
MESSAGE_HANDLER(WM_MOUSEMOVE, OnMouseMove)
LRESULT OnMouseMove(UINT /*uMsg*/, WPARAM /*wParam*/, LPARAM /*lParam*/, BOOL& /*bHandled*/)
if(TRUE == m_bIsNextBtnClicked)
::SetCursor(LoadCursor(NULL, IDC_WAIT));
else
::SetCursor(LoadCursor(NULL, IDC_ARROW));
return TRUE;
This event is getting triggered and absolutely had no issue with this. Similarly I tried adding `MESSAGE_HANDLER(WM_MOUSELEAVE, OnMouseLeave)` this event making an assumption that this will get triggered if the mouse moves out of the client area, but
this event did not get triggered at all.If this is not the mouse event to be triggered for mouseleave which event should I trigger?
LRESULT OnMouseLeave(UINT /*uMsg*/, WPARAM /*wParam*/, LPARAM /*lParam*/, BOOL& /*bHandled*/)
::SetCursor(LoadCursor(NULL, IDC_ARROW));
return TRUE;
Now when I click Next button , **I was actually calling a function which is taking sometime to return** . Before to this function I am loading IDC_WAIT cursor i.e.,
`::SetCursor(LoadCursor(NULL, IDC_WAIT));` .
Now when move the mouse cursor on to the non-client area I want to load IDC_ARROW cursor i.e.,
::SetCursor(LoadCursor(NULL, IDC_ARROW));
When the moves on to the non-client area I am handling the mouse event in sheet derived class as follows,
MESSAGE_HANDLER(WM_NCMOUSEMOVE, OnNCMouseMove)
LRESULT OnNCMouseMove(UINT /*uMsg*/, WPARAM /*wParam*/, LPARAM /*lParam*/, BOOL& /*bHandled*/)
::SetCursor(LoadCursor(NULL, IDC_ARROW));
return 0;
This event is not getting triggered until unless the function in the Next button event is executed.
I want both of them to be done in parallel i.e, click Next button now hover mouse on the client area, Busy icon should come and when mouse moves out of the client area then IDC_ARROW icon should come.
LRESULT OnWizardNext()
::SetCursor(LoadCursor(NULL, IDC_WAIT));
m_bIsNextBtnIsClicked = TRUE;
BOOL bRet = MyFun();
m_bIsNextBtnIsClicked = FALSE;
//Until this function(MyFun()) is executed **WM_NCMOUSEMOVE**
//event is not getting triggered.But this event should get triggered and I
//should be able to see the change of cursor within and out of client area.
Can anyone kindly help me to solve this issue.
SivaV

Hello
sivavuyyuru,
For this issue, I am trying to involve someone to help look into, it might take some time and as soon as we get any result, we will tell you.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Every keystroke and mouse movement, I get an audio notice that I need to shut off. In Safari, the cursor cycles thru every link and metadata field and I get a verbal/audio notice of what it is. How do I shut this option off???

Every keystroke and mouse movement, I get an audio notice that I need to shut off. In Safari, the cursor cycles thru every link and metadata field and I get a verbal/audio notice of what it is. How do I shut this option off???

Press the key combination command-F5 to deactivate VoiceOver. If that doesn't work, proceed as follows.
For OS X 10.7: From the menu bar, select
 ▹ System Preferences ▹ Universal Access ▹ Seeing ▹ VoiceOver: Off
For OS X 10.8 or later: Select
 ▹ System Preferences ▹ Accessibility ▹ VoiceOver ▹ Enable VoiceOver: Off

XY graph "mouse move" event stops generating when click on cursor

Hello All
When the mouse is moving freelly inside the XY graph control, the "mouse movement" event is fired.
The same happens when muse clicks anywhere in the graph with the exception of cursors.
hen mouse clicks on cursors the "mouse move" event is NOT generated even though the mouse is phisically moved.
Is there any explanation to this.
I enclose the example.
regards
Pawel

Just today I had the same problem -> my solution:
set event timeOut to some value(I have it at 1ms) then
add to globalVariables some BOOL variable that will signal if mouse is down or up (set the flag in appropriate event),
then add a case in the timeOut event which will read this
global variable(flag) -> if it's TRUE then change the needed parameter.
So even if the mouse move event isn't fired the main timeout event is.
Not a perfect solution, but better than nothing.
Peace
Waldemar

How to change the mouse cursor

Hi,
I need to change the mouse cursor on a mouseover event of a text filed?
Please help for the same...
Thanks,
Abhijit

I guess your are simply out of luck.....share with us if you find a way.

Adobe pro 9 changes printers when mouse moves over printer window

When trying to print an adobe document, the default printer is ignored and the selected printer changes as the mouse moves across the printer window to reach the print button, making it difficult to stabilize the printer selection. Please advise

I have now checked other people in my departments Adobe versions.
I have Adobe Pro V9.0.0, and does not print correctly.
1 person has Adobe XI Pro and prints correctly.
1 person has Adobe Pro 9.5.5 and prints correctly.
1 person has Adobe Pro V9.0.0 and does not print correctly
I have now installed the available upgrades which only took me to 9.2.0 and still prints incorrectly.
I wil try and find the other updates and see if that helps.
thx.

Cursor doesn't change until mouse move

Similar Messages

Maybe you are looking for