Cursor Jumping In Windows 7 , outlook 2010 , word 2010

I've been reading around and it appears lots of peopel are experiencing this issue. Has anyone managed to fix this annoying issue of the cursor jumping around in when typing. I'm using a sony vaio laptop , windows 7 ?????

Hi jezrp,
Does the issue occur in other applications such as Notepad? If the issue only occurs in Microsoft Office 2010, you can post a thread on Office 2010 Forums.
However, if the issue occurs in other applications as well, please try the following suggestions to see if the issue can be resolved:
If the issue persists after installing the latest drivers which are compatible with Windows 7, the issue can be caused by the factors including third party software, device driver, touchpad settings, virus or spyware infection.
Please see if the following suggestions can resolve the issue:
-    If the issue occurred after installing certain software or hardware, please remove it to check the result. Or, you can perform System Restore to restore to the date before the issue first occurred.
-    Scan your system using anti-spyware and anti-virus software to confirm the system is clean.
-     Check the touchpad's sensitivity if it is available. You can simply disable the touchpad to test the result. You shall contact the device manufacturer directly to confirm the settings.
-    Use a mouse pad for better mouse performance.
-    Replace the mouse and check the result.
Regards,
Linda

Similar Messages

Mangal Fonts and Tunga Fonts in (MS Home and Student 2010) Word 2010 not getting converted into PDF

Why do I get a totally blank PDF file whenever I try to convert any (Microsoft Office Home and Student 2010, Version: 14.0.6029.1000) Word document file containing either Mangal Fonts (Hindi) and Tunga Fonts (Kannada) into a PDF file (by using Adobe Acrobat X Standard - English, Version: 10.1.4, Program File Size: 1790 MB, Complete/Full Version) after formatting and reinstalling all the necessary software / softwares (Microsoft Windows XP, Home Edition, Version 2002, Service Pack 3 and Windows XP Service Pack 3, Version: 20080414-031525, Program File Size: 9.08 MB)?
I'm using
01) Microsoft Windows XP, Home Edition, Version 2002, Service Pack 3
02) Computer: Intel(R) Pentium(R) 4 CPU 3.00 GHz 3.00 GHz, 504 MB of RAM
03) Windows XP Service Pack 3, Version: 20080414-031525, Program File Size: 9.08 MB
04) Microsoft Office Home and Student 2010, Version: 14.0.6029.1000, Product ID: 82503-388-0792296-26607, Program File Size: 490 MB
05) Adobe Acrobat X Standard - English, Version: 10.1.4, Program File Size: 1790.00 MB, Complete/Full/All Version/Features has/have been installed
06) Windows Internet Explorer 8, Version: 20090308.140743, Program File Size: 4.20 MB
Any Word 2010 document file that has been converted into any PDF File unfortunately does not show either the Mangal (Hindi) Fonts or the Tunga (Kannada) Fonts.
The PDF file will unfortunately become/remain totally/fully/completely blank.
When I convert an Excel Workbook having the Tunga Fonts (Kannada) to/into a PDF File, some of the Tunga fonts in the PDF file are legible and some are unfortunately illegible (get superimposed / overwritten on each other).
Perhaps I may get the same result if I try to convert an Excel Workbook having the Mangal Fonts (Hindi) to/into a PDF File with some Mangal fonts being/becoming legible and the rest being/becoming illegible (getting superimposed / overwritten on each other).
Tanveer
Syed Tanveeruddin, Karnataka, India
Message was edited by: tanveerindian
Message was edited by: tanveerindian
Message was edited by: tanveerindian

My chronological sequence of steps to create a Word 2010 Document or an Excel 2010 Workbook:
I first create a Word Document File or an Excel Workbook File and save it by giving an appropriate file name.
Then I right click on the closed Word Document File or the Excel Workbook File in the file folder and convert it into a PDF by retaining the same/original file name.
The font list of Microsoft Word 2010 claims/says/states that both Mangal and Tunga are True Type fonts and also that these fonts will/would be used on both printer and screen.
In case if there is any text content in English in the beginning it will get converted into PDF only till/until either a Mangal(Hindi)/Tunga(Kannada) Font starts.
The remaining English text content does not get converted into/to PDF the moment a Mangal(Hindi)/Tunga(Kannada) Font starts. If the entire matter is purely (100 per cent) in English text it will fully / completely / totally get converted into a PDF file without any problem.
Message was edited by: tanveerindian

Export text from ID5 (Windows) to MS Word 2010

Hi, everybody. My problem goes like this:
I have around 1000 pages of a book in several PageMaker 7.0 files (1 chapter per file).
I have converted the files to ID5 and now I need to export the text and the images to get one Word file for each chapter of the book.
The objective is a major revision/modification.
Eack chapter has a lot of pictures placed inline that flows with the text.
What I need is to put everything in word files in a way that would make life easier for people that is going to make modifications to the text but want to see the images (in screen resolution).
I have no problem exporting the text from ID 5 (rtf files).
Any ideias for putting the images on the Word file without having to do, at least, screen captures with Snagit and placing manually a representation of the images, one by one, in each of the Word files?
Best regards and thank you in advance

Hi Maria,
Not sure how image captions crept into this discussion, but I guessing a language confusion.
Essentially my application works as follows:
It gathers a list of all open documents and their stories, and all the graphics within the stories. Each graphic is checked to make sure it is linked (not embedded), and is inline (not floating) and gives a warning if there is a problem.
Once activated, it finds all the inline graphics,
deletes them and replaces them with the full path to the linked file, wrapped in double < and > symbols. I use this symbol pattern because it is never used in any of our material.
The stories are then exported to rtf files, and all the documents are closed (without saving).
The exported stories are then opened into Word and each placeholder is found using <<*>>, this gives the location for the graphic, and the path can be extracted from the content of the find. The graphic is then inserted, replacing the placeholder text, and repeated until there are no more find results. There may be an easier way to do this bit, but this work for me.
A Word version of the InDesign styles are merged from a separate Word template file to fix other layout incompatibilities.
The files are then saved as Word files.
The application also performs few more functions happening in the background as well to compensate for compatibility problems between the InDesign and Word styles.
This is all done with a combination of AppleScript and Javascript. You should be able to achieve the same with Visual Basic.
Hope this makes it a bit clearer on what to do, and private message me if you need me to talk to your programmer on any details.
Regards.

Cursor jumping in Windows 7

As Im typing this topic the cursor already jumped 3 times, randomly back to the a sentence.
while I think its not a virus as I just got my macbook pro with nothing except windows7 and boomcap 3.2, symantec antivirus and MS office 2007 installed.
Can anyone help on this?
Im using bootcamp updated 3.2

Hi jezrp,
Does the issue occur in other applications such as Notepad? If the issue only occurs in Microsoft Office 2010, you can post a thread on Office 2010 Forums.
However, if the issue occurs in other applications as well, please try the following suggestions to see if the issue can be resolved:
If the issue persists after installing the latest drivers which are compatible with Windows 7, the issue can be caused by the factors including third party software, device driver, touchpad settings, virus or spyware infection.
Please see if the following suggestions can resolve the issue:
-    If the issue occurred after installing certain software or hardware, please remove it to check the result. Or, you can perform System Restore to restore to the date before the issue first occurred.
-    Scan your system using anti-spyware and anti-virus software to confirm the system is clean.
-     Check the touchpad's sensitivity if it is available. You can simply disable the touchpad to test the result. You shall contact the device manufacturer directly to confirm the settings.
-    Use a mouse pad for better mouse performance.
-    Replace the mouse and check the result.
Regards,
Linda

Word 2010 hangs when adding a contact via the Envelopes and Labels dialog box

I am having the following issue on all PC in our network.
Open Outlook.
Open Word 2010.
Click the Mailings tab.
Click Envelopes.
Click the Address Book button.
From the Address Book drop-down select the Contacts folder.
Right click in the list & select New Entry.
Select New Contact & click OK.
Fill in the basic info: name, email, phone numbers, address.
Click Save & Close.
At that point the contact form closes. It looks like the address book list is trying to come back but that is where it hangs. At that point the only option is to force Word to close. However, the new contact is created in Outlook.
I can reproduce this with Word/Outlook 2010 RTM & SP1.
Has anyone else ran into this before?
Patrick Hoban
http://patrickhoban.wordpress.com

Hi
Thank you for using
Microsoft Office for IT Professionals Forums.
Ÿ
Rename the global template (Normal.dotm)
Follow the steps for the operating system that you are using:
Windows 7
Exit Word 2010
Click
Start.
In the
Start Search box, type the following text, and then press
ENTER:
%userprofile%\appdata\roaming\microsoft\templates
Right-click
Normal.dotm, and then click Rename.
Type
Oldword.old, and then press ENTER.
Close Windows Explorer.
Start Word 2010, and then open the document.
Reset Word registry
key and disable Add-in you can refer to this KB article:
“How to troubleshoot problems that occur when you start or use Word 2010, Word 2007, Word 2003, or Word 2002”
http://support.microsoft.com/kb/921541
Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything I can do for you, please
feel free to let me know.
Best Regards,
William Zhou
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]

Lines in shaded table cells do not render properly in pdf created in Word 2010

When creating a pdf with shaded table cells using MS Word 2010; the black lines in the shaded table cells do not show up when looking at the page at a fit page view (anything under around 60%). They print, they are there when I zoom in, but will not show up if you zoom out.
I read a forum post in Adobe here which gave some really logical suggestions, but they didn't seem to work for everyone or the level of effort was not what i can put into it. I also tried some of those and variations of those; but they didn't seem to work.
http://forums.adobe.com/thread/305508
Did anyone come up with a solution? Some people were saying it's a bug in pdf software, if that is the case, has anyone heard of a resolution?
I'm using Windows 7 and word 2010 btw, to create the pdf.
Thanks!!

Just as a test, have you tried the MS plugin for PDF creation? I have found with other versions of WORD and Acrobat that PDF Maker and the MS plugin can both fill in dots and dashes on vector graphics (basically what the border is) and yet it comes out correctly with printing to the Adobe PDF printer. Unfortunately I do not have a solution. In my case, it seemed to be related to the vector graphic itself (I could import it to InkScape or other vector graphic tool and save to EMF and it then worked fine. It may be something that MS themselves have messed up in OFFICE 2013. Good luck.

Can not open Word 2010 docx in Word 2013 from Outlook 2013 mail

Hello,
I got a mail on outlook with a word 2010 attachment in docx format.
Open this attachment with double click will show only the welcome screen with the text Open in protected mode.
With process monitor I could that word 2013 in an endless loop and tries to create the registry key
"HKCU\Software\Microsoft\Office\15.0\Word\Options\Vprsu" in an loop.
The result is always ACCESS DENIED.
When I create this key manually there will be an loop to create the registry key
"HKCU\Software\Policies\Microsoft\office\15.0\word\options\Assist".
The result is always ACCESS DENIED.
When I create this key manually. Word show the attachment immediatelly.
Closing Word and open the attachment again will delete this registry key and the cycle starts again.
Is there a hotfix available that will repair this?
I think this is an error in word 2013 protected view.
Disabling the protected view will help, but is not an good solution.
Is there any other workarround?
Screenshot from process monitor:
Best Regards,
Dieter

This issue may occur if the default file associations for Word are damaged. You may repair Office 2013 to restore the file associations and check if that helps. Refer to the link below for more information. You may restart
the computer once the repair is done.
http://office.microsoft.com/en-us/project-help/repair-or-remove-office-HA010357402.aspx
Note: Close all Office applications before you perform the repair.

Outlook: "Send Immediately when connected" not working for Word 2010

When i disable the option in Outlook "Send Immediately when connected" the messages are placed in the Outbox until i send them manually.
But when i want to send a Word 2010 document from within Word 2010 by E-Mail the message is send immediately.
Is it possible to place the message/document in the Outbox just like with Outlook?
Thnx in advance.

Hi,
I cannot reproduce this problem in my environment. When I send a Word document by clicking File > Save & Send > Send as Attachment, it just go to the Outbox like the common message.
Does this issue happen to all Word documents at any time?
What's the send/receive interval you set in your Outlook? It could still occur that your message will be sent near instantly when you send a message right before the automatic send/receive interval takes place.
For more information, please refer:
http://www.msoutlook.info/question/181
Regards,
Steve Fan
TechNet Community Support

Cannot Import MS Word 2010 to Robohelp 9 on Windows 7 64-bit

I am using Robohelp 9 on my Windows 7 64-bit machine. But when I try to import MS Word 2010 document, I get the following error message:
"The Import Word Document Wizard cannot locate a supported version of Microsoft Word. Please install Microsoft Word 2000 or newer."
What is the solution and why is this happening?

See RoboHelp Tour

No ability to create PDF Files using Acrobat 6.01_6.06 after installing Word 2010. (Windows XP)

Since installing Word 2010 (upgrading from Word 2003) there are no visable PDF Icons nor ability to create PDF Files using Adobe Acrobat 6.06. Operating system is Windows XP. Browser is IE8. Various attempts to bypass this situation have not been successful. No problems had been experienced earlier using Acrobat 6.01 through 6.06 with Word 2003 and earlier Word versions during the passed 10 years or so. Adobe's support is not responding to recognize mentioned situations, nor is there any a solution to fix the problem. Low volume small businesses,with limited need to create PDF files, are being considerably burdened to substante a $200 investment to upgrade to Acrobat X, which may as well not be the solution. It is appealed for Adobe Forums readers to share similar experiences with possible fixes at hand. Responses will be greatly appreciated. Thank you...

Your response is greatly appreciated, Bernd...
Unfortunately, those of us who milk software packages for eons such as
Acrobat 6.06 Standard, a full version of Acrobat X is quoted to be $299
with no ability to upgrade since 7.0 is the cutoff which remains to be
only $139.
It seems to me, Military personal, retired or just ole toots who did
their think, would offer considerations such as Staples, Lowe's, and
other big boxes offer. Such is greed for some who do not consider
alternatives above their noses...
Thank you,
Skip

Quick Parts from Word 2010 not available in Outlook 2010?

Kinda feel daft asking this...
If I type a Autotext (Quick Part) in Word 2010 it doesn't seem to be available in Outlook 2010 and vice versa. Each program seems to be using it's own default template. Saving it to Building Blocks.dotx also makes no difference.
From what I've found looking around the internet it seems this is intentional and the only way to get me AutoText from Word 2010 is to copy the Normal.dotm to NormalEmail.dotm is this right?
Thanks in advance.

Hi,
Your question is not daft! You are right in that there are two templates that are used for Quick Parts. Indeed very annoying because why would you have to insert the same autotext twice right? Unfortunately this is how we stand now.
Maurice
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer. Thank You

Hebrew typing problem in Word 2010 and 2013 in Windows 7 64bit

Hello,
When I am trying in Word (2010 and 2013 32bit installation) to edit a line (inserting a new word for instance in the middle of the line) or start a new line in RTL or LTR Hebrew paragraph I must first type the SPACE char and then to type any other letter. When
I try firs to type a regular letter it is not typed.
It happens only if the Word is installed on a Windows 7 professional 64bit version on my HP 8570p laptop. I formatted the laptop and installed the same OS but 32bit, installed the Office 2010 and the Word works perfect in any language. I formatted the Laptop
again, re-installed again the 64bit OS, installed the Office 2010 again and same symptom - cant type Hebrew letters if not starting with SPACE. If I try to edit the same paragraph with English letters it works OK. When I start a new line with English letters
it works OK. It seem that this symptom happens when the type direction is right-to-left (after ALT-right SHIFT stroke).
This symptom is only in Word. In PowerPoint, in Excel or any other Office application it works fine.
When using Word 365 (not installed localy even I have a local Word 2013 installation) the Hebrew typing is working fine.
I didn't change the default setting options of the Word not after installing the 32bit OS nor the 64bit OS.
I prefer to use the 64bit OS and not the 32bit OS so I do not consider moving to 32bit OS.

Hello,
When I am trying in Word (2010 and 2013 32bit installation) to edit a line (inserting a new word for instance in the middle of the line) or start a new line in RTL or LTR Hebrew paragraph I must first type the SPACE char and then to type any other letter. When
I try firs to type a regular letter it is not typed.
It happens only if the Word is installed on a Windows 7 professional 64bit version on my HP 8570p laptop. I formatted the laptop and installed the same OS but 32bit, installed the Office 2010 and the Word works perfect in any language. I formatted the Laptop
again, re-installed again the 64bit OS, installed the Office 2010 again and same symptom - cant type Hebrew letters if not starting with SPACE. If I try to edit the same paragraph with English letters it works OK. When I start a new line with English letters
it works OK. It seem that this symptom happens when the type direction is right-to-left (after ALT-right SHIFT stroke).
This symptom is only in Word. In PowerPoint, in Excel or any other Office application it works fine.
When using Word 365 (not installed localy even I have a local Word 2013 installation) the Hebrew typing is working fine.
I didn't change the default setting options of the Word not after installing the 32bit OS nor the 64bit OS.
I prefer to use the 64bit OS and not the 32bit OS so I do not consider moving to 32bit OS.

Access Outlook Shared/Delegated contacts in Word 2010's Quick Access Toolbar (QAT)

Hello Nerds,
Is there any way to access Outlook Shared/Delegated contacts in Word 2010's Quick Access Toolbar (QAT).
I am able to see shared/delegated contacts in Outlook by clicking "Open Shared Contacts" but Word's 2010 QAT does not have any option to add/open shared contacts.
Thanks much

Hi,
Do you mean add Delegated Access or Shared Contact command to QAT in Word 2010?
These two commands only belong to Outlook, so we can’t add them to QAT in Word 2010.
More reference about Add commands to Quick Access Toolbar:
http://office.microsoft.com/en-001/support/add-commands-to-the-quick-access-toolbar-HA102814964.aspx
Hope it can be helpful.
Regards,

How do I update to my changed Icloud ID and Passowrd in Windows Outlook 2010. It keeps asking for my old ID

I had to change my Icloud ID and Passworrd recently through my Iphone.. I also have Icloud linked to Windows Outlook 2010 on my computer. Outlook keeps asking for my old ID and password on the computer. How do I change the information in Outlook so I can link back up. Thanks for any help you can give.
VFRIO

Hello vfrio,
Welcome to the Apple Support Communities!
It sounds like you edited your existing Apple ID to a new email address and changed the password as well. To change this on your computer, you will need to sign out of the old account and into the new Apple ID in iCloud for Windows. Please use the attached article as a further reference.
What to do after you change your Apple ID email address or password - Apple Support
Windows PC
Open iCloud for Windows and click Sign Out.
If you're signed out, sign in with your updated Apple ID or password. The data in iCloud will automatically appear on your device after you sign in.
If you're signed in with your previous Apple ID:
Click Sign Out. Depending on what iCloud options are turned on, you'll be asked if you want to make copies or delete iCloud data (Contacts, Calendar, Reminders, Bookmarks, Photo Stream) from your PC. Click Delete. Your data will remain in iCloud and will be updated on your device when you sign in to iCloud again.
Sign in with your updated Apple ID or password.
Have a great day,
Joe

MX885 causing cursor flash in word 2010

For some weeks my mx885 multifunction printer is causing constant and very annoying cursor flash (changing constantly from busy to normal and back) under word 2010. (WIN 7 x64 Office professional x86) If I change printer to anything else, evene mx 885 fax, this phenomenon disappears, but whenever I really want to print I always have to make the printer change procedure to avoid this.
Is there a driver version where this flaw have been corrected? Or is there one to await in the near future? Or any other solution to solve this?
Thank you for your help!

Thanks - it’s a new feature in X - but maybe its not ready for prime time yet..

Cursor Jumping In Windows 7 , outlook 2010 , word 2010

Similar Messages

Maybe you are looking for