Custom badi problem when imported from 4.6C to 4.7

Hi ,
I have the following problem. I imported a custom badi from release 4.6C to a 4.7 and I see a new attribute INSTANCE_FLT_CACHE inside the generated class which is not defined inside the class private section. As a result I get a syntax error .
What can I do?
Thank you very much for your help.

Hi Donatella,
If it is an istance attribute you can declare it using the DATAstatement.
If it is a static Attribute, the contents of static attributes define the state of the class that is valid for all instances of the class. Static attributes exist once for each class. You declare them using the CLASS-DATA statement. They are accessible for the entire runtime of the class.
All of the objects in a class can access its static attributes. If you change a static attribute in an object, the change is visible in all other objects in the class.
The technical properties of instance attributes belong to the static properties of a class. It is therefore possible to refer in a LIKE addition to the visible attributes of a class – through the class component selector or through reference variables, without prior creation of an object.
if it may be useful rewards points are appreciated

Similar Messages

  • BADi problem when upgrading from 4.7 to ECC 6.0

    Hi,
    we are in process of upgrading 4.7 to ECC 6.I had developed the one Z filter dependent BADi ZHR_PBAS0001_BADI in se18 and its differnrt implemations in se19.its working perfectly ok in 4.7 but now in ECC6 its giving error "The program 'ZIF_EX_HR_PBA0001_BADI=====IP' id not unicode-compactible, according to its program attributes.
    I also try to see its attribute parameters but i cannot edit them..they are by default.
    Please Help
    Regards,
    Abhijit

    HI,
       If you want to edit the attributes first deactivate the BADI implementation and change the attributes then re activate it.
    with regards,
    Vamsi

  • Wrong capture time when importing from iPhoto to FCPX

    I am experiencing a strange problem when importing from iPhoto to FCPX. If I open the info panel in iPhoto I see the real date/time when the picture was taken, but if I import them to an event in FCPX using the PHotos Browser and I check the info it shows the time when the image was imported to IPhoto and everything gets messed up.
    I have search for somebody with same problem but I have not found anything so far.
    MY workaround is to import directy onto the timeline, but it is... well, a workaround.
    Thanks in advance

    Why is knowing that important during the edit?
    Yes, FCP only shows the date imported" date metadata.  Future updates of FCP X I assume will add more metadata support, such as Creation Date and Modification Date, since metadata is vital to FCP X and there are some metadata handling features that are on the way. 

  • Bad image quality when importing from word

    When importing from MS Word 2003 to RH X5.0.2, embedded
    images are converted to jpg whith an obviously quite moderate
    compression qulity. This is particularly evident for screenshots.
    Is there a way to improve the image quality?

    Peter , these images were copied and pasted directly in to
    the Word-document (using the Print Screen button) but I did find
    out something. RoboHelp generates two image files of the types PNG
    and JPG for each Word image (named, e.g., image102.png and
    image103.jpg). Regretably, the lesser quality JPG is always
    referenced in the topics instead of the much better PNG. Sometimes
    the two images greately differ in size (pixel size), but most of
    the time they are about the same size.
    So the task might be to change the references in all topics
    using a script and then manually checking the images for their
    size.
    An observation: Any GIF images in the Word file (i.e., real
    *.gif files that were inserted over the Insert menue) remain GIF
    files after the import, they are not converted and maintain a good
    quality.

  • FK DELETE RULE problem when importing 8i SCHEMA on 10g

    Hi everyone,
    I´m having the following problem:
    When importing a SCHEMA dump from an 8i database to a 10g one, some foreign key´s delete rule are changed from 'no action' to 'set null' automatically, even though the whole SCHEMA was imported.
    Has anyone ever had the same problem?
    Thanks a lot,
    Bruno

    I did some more research and I think I was completely misunderstanding Oracle's implementation of delete rules. Now I believe that Oracle implements the "RESTRICT" option in SQL Developer Data Modeler as "No Action", which is the default option, hence why no DDL option is generated. However, it would still be nice if Data Modeler could detect this fact when comparing two models. What I mean it, if comparing an Oracle DB to a model, treat Restrict and No Action as the same, and thus don't attempt to re-generate the DDL for this "difference". For now, I'll just change the action on my models to No Action, and this should resolve the issue.

  • Error when importing from cd

    When importing from cd at random times I'll get this error message "the file "1234" cannot be imported because it does not appear to be a valid exported file" anybody know why? I really want to put these songs on my Ipod. Please help

    I am having the same problem and I know my hard drive is definitely not full

  • Audio problem when importing video files.

    Hello everyone,
    I just started using FCP X a few days ago for a university project and I seem to encounter an audio problem when importing videos in .mp4, .mov format or via the import from camera option.
    Indeed I need to import videos in .mp4 and .mov format into FCP X. The import in itself is normal I can see my videos into the events/clips library and if I play them from the library I can hear the sound quite perfectly.
    However, when I want to edit my videos and put it in the timeline, there is no audio. As a result I started to think that my videos could be the problem so I tried the option "import from camera" option using the Isight camera of my macbook pro but the same things happened. I could hear the sound from the events/clips library but not from the timeline (I can't see any audiowaves in the timeline).
    I found a solution using quicktime and extracting the audio of the video in .m4a then importing the videos files and the audi files corresponding but it's a long process and a waste of time  as FCP X should be able to import the audio of my video into the timeline directly. Especially if it can read it from events/clips library.
    I hope I explained myself clearly and you could help me resolve my problem.
    Cheers
    Christophe
    PS: I'm using FCP X version 10.0

    Update to 10.0.5.
    You have an incorrect setting when you edit. Try trashing your preferences. Post screen shots of your timeline and toolbar.

  • "No photos found" when importing from Canon 7D via USB

    Lightroom has no problem finding my Canon 7D. In the Import dialog, my camera shows up as "Canon 7D" under Source. Still, in the main window it's always that "No photos found" message. :-(
    I have formatted the memory card (Sandisk Extreme Pro 32GB and other cards as well) in the camera a several times, taken some pictures and retried importing. Always that "No photos found".
    Using EOS Utility is never a problem when importing.
    My OS is Windows 7. Firmware 2.0 in camera. EOS Utility version 2.11.4.0
    Always the latest Lightroom version.
    Am I doing something wrong?

    Ken –
    I have Windows 7, PhotoShop Elements 10, and trying this in the organizer.  Basically, I open Photoshop, login to Adobe ID, and then the black screen comes up.  I went to:
    File, then “get photos and video”, then “get from camera or card reader”
    Elements Organizer – Photo downloader box opens up
    There’s a pull down menu asking where to get photos from under the source box but it says “no device found” and doesn’t give me options
    I have an older Canon EOS Rebel XT or 350D Digital camera (approx. from 2005).  Elements does mention that sometimes you have to download the software from the original camera to then be able to download the photos to photoshop.  I was trying to avoid this step and not download this really outdated software on my laptop but if that turns out to be the only way to import my photos, I may not have a choice.  If you can suggest where I am going wrong with trying to download the photos, please do so.  I have the cord plugged correctly from my camera to the USB port on my HP laptop.
    Thank you!
    Allie

  • Audio not in synch when importing from passthrough

    I am trying to transfer some old home movies from VHS to DVD. I am using the passthrough on my Sony TRV-120 to connect the VCR to my Mac.
    For some reason the audio is not synchronized with the video after import, however, when watching from the VHS tape it is fine.
    Any help is appreciated.
    My specs are as follows:
    MacPro Quad Core 2.8 Ghz
    FinalCut Pro Studio 2
    OSX 10.5.4

    I see this question on forums all the time and I see bonehead crap telling people to buy new hardware or software or other trivia. There are real-time, easily implemented things you can do that will fix the problem, immediately and without fail
    1. Convert small as small a chunk as you can at a time. If its a concert, do it one song at a time. If a tv show, go commercial to commercial. The shorter the chunk, the less frames dropped and the less lag time and potential for getting really out of synch.
    2. This is the most important factor: frame rate. The most likely reason you are getting out of synch is that your computer is not fast enough to keep up with the frame rate. Most set the rate at 30fps. Try tweaking it down to 20, then watch how many frames you drop as it's converting: most decent conversion software has a read-out telling you. I use Blaze Media Pro myself. If you are getting almost no dropped frames, you can probably bump it up some, if still too many, knock it down a little. There is very little noticeable difference in 15 to 30 fps, in fact, if you plan on uploading it to YouTube or otherwise converting it, the framerate is going to be sharply reduced anyway.
    This is an almost foolproof way to avoid video/audio synching problems when converting from VHS. I took the time to post this because I was tired of seeing all the useless advice posted on this subject.
    Video editing and conversion takes a lot of CPU power. If you really intend on getting into it in a big way, you'll need a strong CPU capable of handling the load. Other than that, framerate is probably your best bet in making do with what you have.

  • Overly Huge Files when Importing from DVC tape to IMovie

    When importing from my Canon ZR 600 60 minutes of tape equals 16.1 Gigs
    I am looking for what I am doing wrong I have 10 hours of Disney I would like to turn into 5 dvd set not 15 dvd set. Any help would be greatly appreciated.

    Hi Gregory
    About 13-14 Gb per hour miniDV tape movie is as iMovie (QT) works. When
    it is stored down to a DVD disk it will be converted into a working format for
    DVD disks and that will mean that 1 hour will take up a DVD disk in max
    quality and 2 hours in slightly less quality. iDVD doesn't care about how
    many Gb Your movie takes up in iMovie or FinalCut JUST the amount of minutes
    this includes the DVD menues that also need spaces.
    55 min movie and 5 min for menues is OK in max qual.
    115 min + 5 for slightly less.
    You also need to think about how much free space there is on Your hard disk.
    After Your 115 min movie is ready to go to iDVD there should be about 20Gb
    free space left or iDVD will run into problems.
    Yours Bengt W

  • How Can I Delete Originals I Don't Care to Keep When Importing From SD Card?

    Hi All,
    Just installed LR3 thanks to Santa. Have been going thru the video tutorials as well as the Lightroom_3_Help PDF and Lightroom-GettingStarted_Lo PDF but I can't figure out how to simply delete files from the gitgo when importing from SD Card or from my HDD (files already moved to HDD but not yet culled or imported into LR3). I was hoping I could, in LIBRARY, just r/c on a file that is plainly not worth keeping and just delete it so I dont have to do it later. Seems like I could, this way, be able to concentrate more on the shots requiring editing.
    Also, need suggestions as to how I should import my files using DNG, Copy, Move, or Add. First off, I am not a working pro but am an occasional serious amateur. I'm picky and I like things to look good the first time and I like options.  The pix already on my HDD are in the PICTURES folder; those imported from SD card get moved to that PICTURES folder. I have, in the past, moved the processed verssions to a different DESTINATION folder - now I still have the originals and I have processed copies to post and share.
    I understand that LR3 does ND editing but I assume that if I only keep a DNG then any time I want a JPEG or PNG of a picture I have to open LR3 to make one. Since I only have been shooting a few hundred pix a year (though with my new D5000 this will change) I am not gonna load up my HDD any time soon. So, is there a way I can make a DNG file, keep the original RAW or JPEG file AND save a processed JPEG or PNG copy in my DESTINATION folder in one swell foop?
    Thanks in advance,
    Phil in San Diego

    Phil,
    PhilipCWells wrote:
     I understand that LR3 does ND editing but I assume that if I only keep a DNG then any time I want a JPEG or PNG of a picture I have to open LR3 to make one. Since I only have been shooting a few hundred pix a year (though with my new D5000 this will change) I am not gonna load up my HDD any time soon. So, is there a way I can make a DNG file, keep the original RAW or JPEG file AND save a processed JPEG or PNG copy in my DESTINATION folder in one swell foop?
    The LR Exchange site has three plug-ins that allow you to keep a "mirror" copy of your DNG/RAW images in JPG format for use by others without having to go into LR and generate them when needed.  The link is:
    http://www.adobe.com/cfusion/exchange/index.cfm?searchfield=tree&search_exchange=25&search _category=-1&search_license=&search_rating=&search_platform=0&search_pubdate=&num=25&start num=1&event=search&sticky=true&sort=0&rnav_dummy_tmpfield=&Submit=
    One of them should help you with this.
    Jeff (in San Diego as well)

  • Windows 8.1 account limit problem when downloading from store

    windows 8.1 account limit problem when downloading from store        
    I have 250 windows 8.1 tablets.
    I figured since you can use the same account on 81 devices id create 4 accounts.
    I need to download more than 25 free apps from the store
    on each tablet. Putting the same account don't work. (comes up with an error after putting on to many devices that you cant use this account now).
    Whats the best way to do this ? and what if I need to download a paid app ?
    Thank You.

    Hi,
    As far as I know, One Microsoft Account may bound at most five Trusted computers. There is no way to break this limitation.
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • When importing from camera into aperture, photo's are also copied to my desktop, if i delete from desktop i am unable to edit photo in aperture. Must have done something, but what?

    When importing from camera into aperture, photo's are also copied to my desktop, if i delete from desktop i am unable to edit photo in aperture. Must have done something, but what?

    Have a look at your import setting specifically Store Files:
    Make sure it is set to where you want the originals to go.
    Message was edited by: Frank Caggiano - Don;t empty the system trash. The originals that you deleted from the Desktop are in there and are the only copies you have unless they are still in the camera.

  • Problem in importing from dmp file

    Hi ,
    I am facing problem while importing from dmp file on unix server
    Error is as follows :
    Export file created by EXPORT:V08.01.07 via conventional path
    IMP-00013: only a DBA can import a file exported by another DBA
    IMP-00000: Import terminated unsuccessfully
    Export taken was with user xxx@yyy
    import command is : imp xxx/ppp file=abc.dmp TABLES=xxx.table1 ignore=y feedback=500
    please help me out.
    Atul Chougule

    I tried with FROM USER / TO USER , but the result is same.
    $ imp uuu/ppp file=aaa.dmp fromuser=uuu touser=uuu ignore=Y
    Import: Release 8.1.7.3.0 - Production on Thu Jun 15 06:44:49 2006
    (c) Copyright 2000 Oracle Corporation. All rights reserved.
    Connected to: Oracle8i Enterprise Edition Release 8.1.7.3.0 - Production
    With the Partitioning option
    JServer Release 8.1.7.3.0 - Production
    Export file created by EXPORT:V08.01.07 via conventional path
    IMP-00013: only a DBA can import a file exported by another DBA
    IMP-00000: Import terminated unsuccessfully
    I am stucked up ,Dont know what to do .

  • When importing from a Word document placing the text in InDesign

    When importing from a Word document placing the text in InDesign I can only see the text from the first page of the Word document. I have increased the number of pages in the Indesign document to more than what is in the Word document, still only text from the first page is shown. What am I doing wrong or did I not set a setting correctly?

    When you want to auto flow text while placing, hold down the Shift key when clicking with the Place cursor on the first page. New pages will be generated and text will be auto flowed using the margins set up on the master page.

Maybe you are looking for

  • Can't connect itunes to my remote speakers thru airport express

    After having updated the latest itunes 7.3 my itunes does not recognize anymore my remote speakers and does not connect to them. Have resetted my airport, to no avail. still, itunes does not recognize it. please advise what to do as it is very annoyi

  • PE 9; can clip from scene line be saved to use in another project?

    Hi- First time post.  Can a clip in the scene line be saved as a separate clip in organizer to be used in another project?   I have a long project that is comprised of many clips, and I would like to reuse some of them in other projects, or other ver

  • Preview 5.5 won't follow links in pdf

    I have a collection of pdf files that have links to one another embedded in them,. Collectively they form a manual that you can jump around in. In 10.6 when you clicked a link while viewing in Preview it followed the link. In Lion (10.7) it gives a p

  • Possibility of Stock posting when the inspection lot is in created status?

    Dear, Is it possible to do stock posting when the inspection lot is in created status? Please help. Yor suggestion will be appriciated. Regards Vivek Deshpande

  • How to read Chinese though the E71.

    I notice that the E71 doesnt support Chinese anyhow, but you are able to read or maybe send messages in Chinese using the PC suite, which correctly shows chinese on my laptop once synchronize them. Good luck, still waiting for the support from Nokia.