Custom Infotype not displaying locked records in the list screen (3000)

I have a custom infotype (9xxx) that will not display the locked records (locked indicator (sprps) is set to X) in the list screen (3000) in PA20 and PA30.
Any ideas on what may be causing the records to not display in the list screen?
Thanks,
Ted

Hi,
for creating both employee and appliciant infotype you must check 'Both'  in PM01  IT tab.
Regards.

Similar Messages

  • Custom property not displaying at folder creation or Details screen

    Hello everyone
    I have created a custom boolean property that I need to have displayed both at folder creation and in the Details screen of a folder after it's created.  The property is in the default namespace, and is in the Custom group.  I have created a properties file for the label and created the necessary meta data extension.  The folder validity pattern is " / " and the Resource Type listed is "normalct" so that it's active for folders only.
    Then I went to Property Groups and listed my new property in the Group Items field of the Custom group.  The Custom group is a part of "all_groups" so that group is displayed both when a new folder is created in KM and when the Details screen of a folder is displayed.
    <i>However,</i> my custom property isn't displaying under the Custom tab when I go to create a new KM folder, nor when I view the Details screen of an existing folder.  What configuration am I missing?  Do I have to develop a custom property renderer for each new property I need to create?  I was hoping I could achieve this result with configuration changes only, but I must be missing something.
    Any help would be greatly appreciated and rewarded. 
    Thanks in advance,
    Fallon

    Hi Fallon,
    actualy, if you want this property to be displayed only for folders and not for documents, you don't need to specify the resource type for folders. Setting "/" or "/**" for "Folder Validity Patterns" and "" (empty) for "Document Validity Patterns" should be enough.
    If you sill experience problems, you have to check all settings, for example with the settings suggested in this <a href="https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/2654">weblog</a>. If you use the "default" Property Group in the property settings, you don't have to enter the <b>Property ID</b> in a special Property Structure Group that in turn is integrated in the all_groups Property Structure Group.
    Hope this helps,
    Robert

  • Report- not displaying some records in the report

    I have a query say q1 based on the query value. I am getting place holder colums obtained from a procedure. based on one of the place holder columns i want to display the data say i have place holder column err_ind if it y. i don't want to display the record in report.
    how can i do it ? ur help is much appreciated.

    Hi Praveen,
    Thanks for the response.
    Actually i did debug the program with the help of our technical guys but found nothing wrong in both the quality and the production system. We compared the program in both the systems and it seems to be same. I am exploring this issue. Will update the findings here.
    In case anyone has any suggestion please do suggest.
    Regards,
    Gokul

  • RPUAUD00 Reports is not displaying previous records details just new records

    Hi Guru,
    Need some input, I am trying to get infotype log. I maintain V_T585A/B/C for Infotype 2.
    Can you check screen shot of the same and confirm why its not displaying old records .
    Regards,
    Vijay Agarwal

    did you select long term documents? - Long-term documents are used for revision purposes, in other words to find out who changed, deleted or created what and when. check changes of note no. 44206 means, table PCL4 can get pretty large and as a follow up the report RPUAUD00 might take a long time to evaluate the logged changes in the infotype data. Please note that when an archive is selected, then the found archive is read until the record is found. This can take a lot of time (taken into account the access to the file itself), especially with large files. That is currently standard design behavior. But you can run regulary report RPUAUDDL to delete old entries in PCL4. PCL4 contains change documents for Master Data and applicant admin. In PCL4 there are four clusters: LA, LB, SA, and SB.  It contains the data created by using the 'write infotype document' function.  LX are long-term documents, SX are short-time documents. 'A' stands for employee, 'B' for applicant.  The 'write infotype document' function is maintained in tables T585A, T585B, and T585C.

  • Form does not display all records from table

    Hi guys
    I modified one form that was based on a signle DB table. I removed certain fields from the table and added some extra fields to that table. Then based on the new table I also modified the form and removed the text items related to old fields in the table and added new text items pointing to the new fields now. II have checked all the new items properties and they have don't seem to be wrong or so. But now the problem is the form does not display all the records from the table. before it used to display all records from the table when qureied but not now. It only certain records from the table containing all new data and also old data but the form does not display other records though I don't see any obvious discrepancy. Remember that the before doing the modifications, I have table back for the old, created another table that contained new records for the new fields, and then I inserted the old records and updated the new table data in the new table with these new table values. So this way I have got my new table. Could someone help why the new modified form fails to display all records from the new table updated table though it display some of them successfully.
    Any help will be appreciated.
    Thanks

    hi
    Set the block property of "Query All Records" to "YES"
    hope it will work.
    Faisal

  • Query not displaying all records when execute it first tme

    Hello,
    i have an issue with the WEBI report.when i run  the report first time it's displaying only few records, but when i run the same report second time it's displaying the more records and it's correct.
    Could any one tell me why it's not displaying all records when i execute first time.
    Thanks in advance for your help.
    Regards,
    Prathap

    Which BOBJ version do you use?
    Which kind of data source are you retrieving data from?
    Regards,
    Stratos

  • XL Reporter Do Not Display Blank Records

    hey all,
    I've built a standard P&L Budget report in XL Reporter with parameters for each segment of the account code as made possible by patch 02.  However, when I uncheck "Do not display blank records," the generated report lists an instance of each account for each segment that I've chosen in the parameters.
    The selections for the account segmentation don't seem to filter the accounts themselves, instead they filter the balances of each account.  Does anyone know why it only filter's the balances rather than the accounts themselves and ends up repeating the accounts for each segment selected?  Is this a bug?
    thanks in advance!
    Kevin Lee

    Hi Kevin,
    Seems that noone in this forum can answer your question. Maybe this is related to the fact that the main focus here is the SAP Business One SDK?
    In case the question is still open:
    I would recommend that you try these forums - which should fit better:
    For SAP partners only there's a forum where you can discuss implementation questions etc.:
    Got a question about customization / implementation? Maybe ask it in CPSN!
    ...and here's the SAP Business One Forum in the "SAP Community" (public to anybody):
    Re: Got a question about customization / implementation? Maybe ask it in CPSN!
    ...or you might try your luck with SAP Support?
    Bugs should anyway be reported to SAP Support!
    HTH
    Frank

  • Custom barcode not displayed after changing width

    Hi All,
    I have a requirement to increase the size of the barcode from 9cm to 10cm in a SAPscript form.  Previously we were using the standard barcode BC_128B.  Using SE73, you can see the the configuration of standard barcode BC_C128B.
    Bar code        Width       Unit      
    BC_C128B      9,00        CM       
    ZBC12810     10,00        CM       
    ZBC12810 is the custom barcode that I created which slightly differ from the standard object (different width and description).  I also created a custom device types that is used by the barcode and then included the custom barcode in each one of the custom device types.
    The above steps I did to create the custom bar code and device types can be found here: [Traditional Barcode printing for Smart Forms and Sapscript|http://help.sap.com/saphelp_nw04/helpdata/en/68/4a0d5b74110d44b1b88d9b6aa1315b/content.htm]
    I then changed the barcode defined in the sapscript.  The result was the barcode is not displayed anymore and only the barcode text is being displayed.
    Your inputs are greatly appreciated.

    Hi,
    Kindly go through these links below:
    How to create a new BARCODE PREFIX   (for SAPScripts)
    Re: SAPScript with Bar Code
    Hope it helps
    Regrds
    Mansi

  • ITunes will not display my iPhone on the device tab, message appears saying error in reading iPhone what can I do to correct this, I have tried everything suggested in apple support

    iTunes will not display my iPhone on the device tab, message appears saying error in reading iPhone what can I do to correct this, I have tried everything suggested in apple support

    - Try restoring on another computer.
    -  Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • Can we translate in captivate 7? I Have tried and changed the Caption and Notes. Can we change the on screen text of te normal slides, interactive call out boxes, screen recording slides and quizzes? If yes, please let me know the process.

    Can we translate in captivate 7? I Have tried and changed the Caption and Notes. Can we change the on screen text of te normal slides, interactive call out boxes, screen recording slides and quizzes? If yes, please let me know the process.

    Of course! Here ya go
    For the record, I did create a new project with only two slides to try and duplicate the issue. I had the same problem. I unchecked the Mouse Click Sound check box, republished and the slide auto advanced. I'm wondering if a default sound file was somehow moved or deleted? I discussed uninstalling and reinstalling C7 onto my laptop, but that's a frustrating solution haha

  • Help!!! How to make quicktime plugin do not display on top of the web page?

    Any one knows how to make quicktime plugin do not display on top of the web page??? I've tried to change the zIndex property using javascript, but it doesn't work.
    Because we have some widgets which are required to be moved to anywhere on the page, we use iframe to implement that, so it can display on top of quicktime plugin, but the plugin flickers sometimes when we do some operation on the widget which is on top of it.
    Anyone can helps me? Thanks in advance!!!
      Windows XP Pro  

    > Can you tell me how to set the script so that the
    lightbox image is
    > displayed
    > on mouseover instead of mouse click.
    Check the docs. Trent is usually very thorough in his
    instructions.
    Hint: I haven't studied it but it probably involves modifying
    one of DW's
    built-in Behaviors.
    Walt
    "ducati1" <[email protected]> wrote in
    message
    news:gkb906$qrd$[email protected]..
    > Wow that DW extension is just what I needed.
    > Thanks..
    > Can you tell me how to set the script so that the
    lightbox image is
    > displayed
    > on mouseover instead of mouse click.
    > I currently have the thumbnails set to insert the ALT
    text into a text box
    > on
    > mouse click.
    >

  • HT201250 The back ups are not displaying when i enter the time machine

    I'm trying to restore my files to my new MacBook I just purchased. I have the external hard drive connected and entered the Time Machine. But, the back-ups are not displayed "in pink on the right side" as indicated in the directions. I do see the back up folders when I open up the hard drive using Finder.  Any ideas on how I can restore my files?
    Thanks

    You should be using Setup Assistant to import your data, as detailed here:
    OSX Tips: Setting-up a new Mac from an old one, its backups, or a PC Using Setup Assistant on Lion

  • I try to display a number of executed record on the forms screen.

    I try to display a number of executed record on the forms screen
    while a cursor loop statement is running. (the cursor statement is in server)
    And i used the 'when-timer-expired' trigger in forms developer.
    it was possible to update the count of executed record to a temporary table,
    but it didn't work to dislay the result on the forms in real-time .
    only on time the trigger was executed when the cursor loop was finished.
    Does anyone know the method of showing the count in real-time???
    Message was edited by:
    조현정
    Message was edited by:
    조현정

    If I understand you:
    - You created a procedure in the database that uses a cursor to process one record at a time.
    - This procedure updates a temp table that indicates the current record being processed.
    - While the procedure is running you created a repeat timer that queries the temp table and displays in the form the current record being processed.
    Now, you say that the timer only executed once after the database procedure was finished. Is that your problem?
    If so, I think you may have to start the procedure using the database scheduler. Then use a repeat timer to query the temp table. Your procedure will need to indicate in the temp table when it is finished so you can stop the timer. (There may be another way to check if the procedure is done. For example, the database may provide some means to indicate that the procedure in scheduler is done.)
    Message was edited by:
    Mark Roberts

  • My apple TV will not display anything although it [the TV] meets all of the requirements. It worked for about four or five days and than stopped yesterday, but when i brought it to the apple store, it connected fine to their tv. Any help or suggestion?

    My apple TV will not display anything although it [the TV] meets all of the requirements. It worked for about four or five days and than stopped yesterday, but when i brought it to the apple store, it connected fine to their tv. Any help or suggestion?

    mrdctaylor wrote:
    Since I updated to the latest/greatest version of the software I can no longer put my Apple TV to sleep by holding down the middle button.
    Thanks!
    Apple have changed this setting with the Apple TV Software Update 5.1:
    About Apple TV (2nd and 3rd generation) software updates
    Feature
    Summary
    Shared Photo Streams
    Accept invitations for Shared Photo Streams, browse photos and comments, and receive notifications of new content.
    AirPlay
    Send audio content from Apple TV to AirPlay-enabled speakers and devices (including AirPort Express and other Apple TVs). Also includes the ability to require an onscreen code to use AirPlay with your Apple TV.
    iTunes account switching
    Save multiple iTunes accounts and switch quickly between them.
    Trailers
    Search movie trailers. In the United States, see show times for local theaters.
    Screen savers
    New Cascade, Shrinking Tiles, and Sliding Panels screen savers.
    Main menu
    Reorder icons on the second page by holding down the select button on the remote.
    Subtitles
    SDH support for the deaf and hard-of-hearing as well as improvements to viewing and selecting subtitles.
    Network configuration
    Support for setting up advanced network options using configuration profiles. Seehttp://support.apple.com/kb/HT5437 for more information.
    Stability and performance
    Includes general performance and stability improvements.
    If you don't like this, you can leave feedback here: Apple Feedback

  • HP Photosmart Plus B210a all-in-one won't display any networks in the list.

    Hi, I recently purchased a HP Photosmart Plus all in one printer and I've been having trouble with it from day one.
    First off, it won't connect wirelessly.
    It won't display any networks in the list when searched for, it won't take my network details when I manually input them and it won't take any static IP address I've tried from other suggestions.
    Secondly, the print quality is very bad. Streaks and fading are occuring and after using up 70% of my ink trying to sort it out through troubleshooting it's still bad.
    It's extremely important for me to be able to have web access using the printer as all members of my household use it and it'll get fustrating having to car laptops and computers around to print.
    Can anybody help at all?

    Top line says "The wireless radio is not functioning. Contact HP support"
    I take this as a very bad sign and needs replacing?
    The tests I done produce streaks, fading and lines. I printed off two photos, one from a memory card and one from a scan. The memory card produced heavy blocked lines of color and the scan was just dull.
    I'm using a Wanadoo Wireless Livebox and Windows 7 64 Bit
    One other question... is this like a brilliant printer for photos mainly? I'm a Graphics design student and although my final prints are made from home I would like accurate and decent printouts for my portfolios. Should I keep this or go for another one with similar features and better print quality?

Maybe you are looking for