Custom RRI

Hi there
I need to implement custom RRI
If I select material1 (query1) recepient query 2 should show material 2
(I know it soubds stipid but its just test example)
I know where to put ABAP code (se19 , create BAPI based on SMOD_RSR00004) but I dont know what I need to do
Can somebody type a code for me?
Where I should put a restriction that my code is valid for queries 1 and 2 only?

no answer

Similar Messages

Jump target RRI from BW report to CRM Portal

Hello Experts,
Need to create a Jump target from the BW query to CRM Portal Tcode CRMD_ORDER.
I am passing the transaction number ( similar to sales order in R/3) to this tcode CRMD_ORDER in CRM
Step1) create the receiver
Type: Transaction. Defined the source system and entered the Tcode CRMD_ORDER in the 'report' field.
Receiver is created
Assignment. details:
I can see the source infobject 0CRM_OBJ_ID from the Infobject column; Type : Infobject; Field name : OBJECT_ID / GV_OBJECT_ID;
OBJECT_ID is the table field in the CRM System for the transaction number.
GV_OBJECT_ID is the screen field name in the CRM system for TCODE CRMD_ORDER.
I tried with both the OBJECT_ID and GV_OBJECT_ID.
Expected result: Open the Tcode CRMD_ORDER with the transaction number eg: 1000001 that is passed from the Bex report. Currently that is not happening. It is opening Tcode CRMD_ORDER but not the document 1000001. I have to manually open it.
Please suggest if anything got missed in the definetion of RSBBS.
Regards,
BWer

Hi,
What I found out so far is that by using a URL like
http://...:8060/sap/bc/gui/sap/its/BBP_POC_DISPLY?sap-client=300&sap-language=EN&PO_GUID=490622657B526483E10000000A0A3D25
in RRI it is possible to jump from a BW web report to SRM to display a corresponding purchase order. This URL uses the PO_GUID, but with help of a couple of lines of ABAP in a custom BSP I was able to use the PO number instead of the GUID, too.
In general I am looking for URL's do display purchase oders, shopping carts and confirmations in SRM and URL parameters that can be used. Or anything related to that topic.
From my experience users find it very useful to easily jump from BW into the original transactions to clarify potential issues there. I have implemented this a lot in the past with BW and classic R/3 GUI transactions, so I'm looking for a way to implement this with SRM as well.
Best regards,
Rudolf

Recreate report Customer Open Item Analysis of Overdue Items S_ALR_87012178

I am trying to recreate the R/3 standard report S_ALR_87012178 in BEx.
I am filtering Item Status so that only open items are included (0FI_DOCSTAT = "O"). However, the numbers I am getting do not match to R/3.
Any ideas on filters, etc. that need to be applied to duplicate the results?
Update - i'm currently pursuing this as a data loading error since a RRI between this report and it's underlying DSO do not give matching results.
Edited by: Khaled McGonnell on Jan 15, 2010 4:27 PM

hi,
there is a simple solution to this:
go to SE93: S_ALR_87012178 display it take the program name wich is assigned to it.
copy the logic of the report into a Z report.
because STD SAP code should not be distrubed.
customer description will be in KNA1-NAME1/NAME2
the above is already there in the STD program logic.
customer number will be in KNA1-KUNNR
add the above and give it as FS to the developer.
hope satisfies your requriment.
regars,
balajia

RRI - Back to Webreport

Hi experts,
we use 3.5 webtemplates and RRI. We can jump out of a webtemplate in a transaction or ABAP-Report in a WebGUI (R/3). It works fine! But if we want back to the BW-Report, we have to close the browser. If i click on the "Back" or "End"-Button in the WebGUI, i land in rsrr_web. Is closing the browser the only way returning to the BW-Report or is there any customizing i have to do in (R/3).
regards
Daniel

From teh users guide here (it's a .pdf) -> http://images.apple.com/dotmac/docs/L358808ABackMacUG.pdf
"*Adjust sleep settings*
Back to My Mac can connect to your remote computer only if it is awake. If your computer is in sleep mode, it does not automatically wake up when you try to connect using Back to My Mac."

Issue on RRI in BI 7.0

Hi all,
I created sender and receiver queries and assigned in RSBBS. When I run the report, I am unable to see go to option in result screen.
How can i solve this problem?
Thanks,
Venky

HI
RRI is known as Report to Report interface, we use this RRI in the senario to jump from summarised
Report to Granular Report.
When we design the the RRI the following steps to be followed.
1. Make sure common characteristic present in sendr and reciver quaries.
2. created the Sender quary as summarised report, and create a variable for
    characterisitic which is common in both the quaries Ex: customer.
3.Go to the Reciver quary and define characterisitic variable with
Replacement path, on the charecterstic which is common in the
both the quaries Ex: customer
4. Now go with RSBBS T.COAD and define the sender Quary and
   Reciver quary Define the Target name of the sender quary and finaly
   go with Assignment Details Do the Necessary settings.
5.Go to the Analyser and view the Replacement of sender to
receiver quary.

RRI to Project Systems Line Item Report

Hi
I have configured a RRI from a BI query to the report RKPBW000 as per OSS note 356166.
My query includes the restriction for 0DB_CR_IND - (debits only).
However when the RRI is executed the line item report is not restricted by the debit credit indicator ie: Debits only.
The details of my RRI in RSBBS includes the relevant transformation for Datasource 0CO_OM_WBS_1.
Am I missing any settings to ensure the restriciton for 0DB_CR_IND is passed to the R/3 line item report?
I have been looking at the assignment details but not sure if this applicable?
Any help would be appreciated.
Thanks
Ian

Hi
Lets assume that you have the following report:
C001 M001 100 200
C002 M002 200 400
When you select the customer C001 from your report and then select jump target. The customer C001 will be passed to the target and the report will be restricted to C001 and it will be displayed for C001 in the target query.
This needs to be defined in the assignment details of RRI. Plz check the assignment details whether you have configured it properly.
Hope it helps.
Regards
Sadeesh

Query in RRI / Jump Targets

Hello Gurus,
I am querying on the FI-Ageing Analysis. The report is from an infocube. I have created a jump target, which in turn goes an ODS Query. In an ageing report, I have a total Overdue Balance (OB),OB between 0-30 days, OB between 30-60 and 60-90 days. The report is displayed on the customers. When I right click the value in one of the customers 60-90 days column (for eg.) , the jump target takes me to the ODS report but it shows me the line item documents for the total balance of the customer, while I am interested in seeing the documents of only overdue between 60-90 days.
Has anyone encountered this situation. Pls guide.
Thanks in advance

Hi bw,
You can pass parameters in RRI.
Use the URl for furthur details .
http://help.sap.com/saphelp_nw04/helpdata/en/99/08629bd3e41d418530c6849df303c9/frameset.htm
Taru Gupta

How to drill down from summary report to detail report using RRI?

Dear all:
A problem about RRI. Please help me!
1.I create a BEx query 'Q1' to show summary data.
2.I create a BEx query 'Q2' to show detail data.
3.In Q1, all the products are shown each row.
       The 1st coulmn is 'Balance in the begin', it shows how many customer claim cases are opened before this week.
       The 2nd coulmn is 'New', it shows how many customer claim cases are initalized in this week.
       The 3rd coulmn is 'Close', it shows how many customer claim cases are closed in this week.
       The 4th coulmn is 'Balance', it shows how many customer claim cases are still opened now. And this column is calculated by this fomula as follow:
         'Balance in the begin' + 'New' - 'Close'
   4.In Q2, it lists each customer claim case. Include ClaimNo, Sold-To Party, ProductNo...
   5. I set Q1 as sender, Q2 as receiver.
   6. If I focus on the value of 'New' or 'Close' and then go to 'Q2', the correspond detail calim information in 'Q2'. But it is fail if I focus on the value 'Balance'.
   Why?
Thanks,
Jolin

I don't know if you can use the hyperlink to call a subreport but the following has worked for me in Crystal 10:
1. In your main report create a group on the field you want to pass to the subreport.
2. In the Group Footer, use the "Insert Section below" menu command so that you have a Group Footer 1a and a Group Footer 1b.
3. Put your table fields in the Group Footer 1b section (this would be similar to your Details data).
4. Put the sub report in the Group Footer 1a section. Set up the links to the subreport from a table field in your main report.
5. Right-click on the sub-report, select "Format Sub-report". Click on the "x-2" button to the right of the Suppress option and enter "DrillDownGroupLevel = 0" in the "Formula Workshop-Formula Format Editor-Suppress" window and save it.
When you double-click on your data field (i.e. the field in Group footer 1b) it should drill-down and run your subreport.

RRI Jump Query opens the receiver query in standard Template??

Hi,
Few questions from me (Note I have searched the forum database for answers but didnt get a convincing answer)
1) How can I use 1 web custom built template for 2 different queries?
2) I have created the sender receiver setting for the Jump queries. The problem that I am facing is that the sender query uses the custom built web template but when I use GOTO the receiver query instead of using the custome template it executes in standard webtemplate. Kindly suggest how can I open the receiver query in the custom built web template after GOTO function.
Thanks for all your help in advance..
- Amit

Hi SS,
I agree to the statement that RRI uses link to Query but if we setup the custom web template for that jump query in WAD....it will never open in that template via RRI ???
That very disappointing discovery for me !!!
Any other possiblity to make this work????
What if I have the sender and receiver query web template(custom) same???.is it possbile to use the same template for these two template even after jump ???
Regards

Multiple line selection for RRI

Is it possible to select multiple lines from 1 query and do a RRI to the receiver query. Eg : Select multiple POs and then go to PO details query which shows PO details of multiple POs.
Also when you do a RRI from 1 q to other , does the filter criteria of 2nd query pop up to the user ?
thanks in advance ,
LH

Hi Lakshmi,
Yes, it is possible to select multiple lines from one query. It means as you said, if you select multiple PO's i.e., Po's belong to a customer. If 10 PO's belong to single customer, then if you select that customer and Goto RRI in the report, you will get the details of all those 10 PO's in the RRI report. This is done in RSBBS tcode>After creating RRI>Assignment details-->Map the required fields of sender to the reciever queries according to the need.
When you use RRI, the reciver query, i.e., the second query will contain the filter selection as usual in the normal report when executed.
Hope this helps u...
Regards,
KK.

RRI - Jump Target

Hi ALL,
I have a requirement where i have to Create a RRI in bex Reporting, How can i introduce RRI interface for one query to another. Is BI 7.0 supports RRI ? if so How it will process and works ,What are the settings lieing in sender and Receiver and Assgnment Details. Does Query1 and Query2 has atleast one info object common? what if not.
It would be great if anyone answer
Thanks
Dolly.

Hi dolly,
For example, Suppose you created two cube CUBE A ( which contains Company code , Customer, Revenue) and Cube B (Controlling Area, Region, Price) . so There is no common column.
On cube A you created query QUERYA
On cube B you created query QUERYB
GOTO>>> RSBBS,
sender>>>CUBEA/QUERYA
REPORT TYPE>>>>BW Bex query
Target>>>> Local
receiver report>>> CUBEB/QUERYB
save it.
after you run the query in analyzer
Right click on the repor>>>> goto >>>> QUERYB. it will jump.
But Unlike the other it will just jump from QUERY A TO QUERY B. But its not jumping into the query w.r.to particular charecteristic.I mean for the respective region you can't find the detail information like product, and billing document, customer.For these thing threre should be common charecteristic.
Regards,
Ranganath

BI Statistics Query - RRI Issue

Hi Experts,
I have copied a BI Statistics querys and customized it. The RRI Options available for the original query are available for the copied query as well. However, I do not want to keep all of them.
When i checked the T.code RSBBS for the copied query and the original statistics query , it does not show any receivers.Please let me know how I can change the RRI options for the copied query.
Regards,
Kavitha.

Hi kavitha,
This is what we do for a normal RRI,Chnage accordingly as per requirement.
The steps to create RRI
1)Goto T code RSBBS
2)In the Sender Query -give the Query name
3)Press Create tab which is there on the Right Top
4)It will as for a list select the Query name in the Bottom
5)and Press OK.
6)Come back to the main Screen os RSBBS and Select the Receiver Query and click Assignments.
7)Make them objects as Delete.
8)Save and Execute the Query ,Sender Query.
9)Right Click on the Query ,we will find GOTO Tab ,Drill down further
we can view the Second Query.
10)we can view the Second Query through first query
Check these
http://help.sap.com/saphelp_nw04/helpdata/en/99/08629bd3e41d418530c6849df303c9/frameset.htm
https://forums.sdn.sap.com/click.jspa?searchID=6435760&messageID=3353440
https://forums.sdn.sap.com/click.jspa?searchID=6435760&messageID=2762562
https://forums.sdn.sap.com/click.jspa?searchID=6435760&messageID=1846978
https://forums.sdn.sap.com/click.jspa?searchID=6435760&messageID=180080
Rgds
SVU123

RRI problem in the query

I am facing problem using RRI feature.
In my first Query I have Two customer Exit variables to fetch values of 2 dates and i am showing records for dates in between them. The query is working very fine.
Now jumping from this query to another Query which will display all data where a date(different info object than query 1) lies between two dates of previous query(which are customer exit variable).
I can filter data in my second query by applying range of values to both the customer exit variables of query 1.Please help.
Now I just want to know how to pass the values of the customer exit variables form query 1 to query 2.
Message was edited by: Sachin

Hi,
You're trying to use Table Alias(T0), i'm guessing its not allowed. Try also to remove dbo, try @EMPA or just EMPA.
HTH
Manuel

Query Drilldown does not Invoke Customer Exit Variables

We have a problem with performing a drilldown in a BEx Analyzer reprot, basically the client is a Trading company and they have inter company trading. We are using the Profit Centre as one of thre u201CFree Characteristicsu201D in the query and hence we are able to drilldown on a Characterictc by Profit Centre.
We are using a couple of BEx query variables (Customer Exit variables) to determine the inter-area and extrenal area profit centres and these profit centres will be different based on the level of Hieracry node selected when the query is initially executed. For example if we assume a hierarchy with has one root node, 3 children under the root node and 2 grand-children under each of the 3 child nodes, now if we are at the root Node of the Hierarchy then every profit centre is internal and there are no external profit centres, similarly if we are at the 2nd node (i.e. one of the child nodes) then everything under that node is internal and everything in the other 2 child nodes is external and so on.
This is where the issue starts for us, since on the report if we select the the node we want to see the results for at the query rumtime (i.e. the Customer Exit Variables are invoked at I_STEP=2 and they select the other nodes of the hierarcy if any and group them into either external or internal) then the results are correct. Now if we were to drilldown, i.e. We selected the root node and we drilldown on to see for example of the child nodes then the result are not correct, this becomes apparent when we drilldown further to the grand-child nodes.
One logical explaination is that when we are doing the drilldowns the customer exit variables are not being invoked in the BEx analyzer report and hence they are not grouping the sums for the internal and external profit centres relevent to node selected in the Drill down.
Does anyone have any suggestions regarding how to make this query work properly or show the correct results in BEx Analyzer (ideally), I have considered the Workbooks option but the client does not want Workbooks.
Please let me know if there is a program etc we can customise to ensure that the Customer Exit variables logic is used when the user does a drilldown in the query or any other way to make it work.
Many Thanks
Jack

Hi
Just to aid anyone who is thinking what to do in a similar situation, I am aware that RRI or using workbooks are a couple of good alternatives (just that these are currently not being considered by the client, hence I am asking here).. Also, if someone has Business Objects WEBI then we can satisfy the requirement by creating a new Webi Report for each of the nodes and displaying it (similar to Workbooks but much nicer and faster) or we can get the Webi to execute the variables again during the drilldown... Unfortunately the client is not using Webi either... So the solution has to be in BEx Analyzer / Query designer based...
If you have any thoughts on how I might be able to do what I want to do then please feel free, I am quite confident that I am not the 1st person to come accross this issue and someone somewhere has solved this issue.
Thanks

RRI-Drilldown to R/3 system

RRI drill down to R/3 sytem
Posted: Mar 29, 2005 4:17 PM Reply E-mail this post
Hi,
I am working on setting up RRI drill i n the HR benefits InfoCube I did the set up in RSBBS with sender and receiver information etc.
I am using the standard business content delivered by SAPand queries have been created from 0PABN_C01.
the reporting requirements are well catered by creating a queries using SQ01.(usergroup, variant defined and custom transaction code to call the report created).
I run the report in BW . and when I try to filter by employee and then go to R/3 system, it gets the details for all the employees which I don't need because for all employees it takes along time.
I would appreciate if anyone could help me to get to the employee level details?
Thanks
Sampath

hi Prakash,
have you maintain the 'detail assignment' ?
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6eb89190-0201-0010-89bf-ad46d1503ef9
hope this helps.

Custom RRI

Similar Messages

Maybe you are looking for