Customer Exit Variable to populate one of the three dates

Hi ,
There is a requirement where we need to need to enter either of the following dates :
1. Order Date
2. Delivery Date
3. Bill Date .
Hence we need to write a Customert Exit Variable for the same .
One of these 3 dates should be mandatory i.e, the Report should not execute if none of them is entered while it should execute when either of them is entered.
All I know is that this Customer exit should be written in iStep = 3 .
Please suggest the remaining solution.
Regards
Garima

Please verify if this is the correct Code which need sto be written :
IF i_s_rkb1d-compid EQ 'QUERY_NAME'.
If i_Step = 3
LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE WHERE VNAM EQ 'VAR1' OR
           VNAM EQ 'VAR2' OR VNAM EQ 'VAR3'
    LOW = LOC_VAR_RANGE-LOW.
    HIGH = LOC_VAR_RANGE-HIGH.
IF SY-SUBRC NE 0 OR LOC_VAR_RANGE-LOW IS INITIAL.
             CALL FUNCTION 'RRMS_MESSAGE_HANDLING'
               EXPORTING
                 I_CLASS = 'RSBBS'
                 I_TYPE   = 'E'
                 I_NUMBER = '000'
                 I_MSGV1 = 'At least one date parameter should be entered'.
             RAISE AGAIN.
ENDIF.
ENDLOOP.
ENDIF.
ENDIF.

Similar Messages

How to change a customer exit variable in columns

Hallo Experts,
i have a query with two columns. In the first column is a customer exit variable, who get filled with the actual calyear. In the second column is the same variable with an offset -1.
When i execute the query, in the first column i can see the year 2007 and in the second column i can see 2006. That´s ok.
Now i want to change the year (dynamically) in a filter 2007 in 2005. The result should be in the first column 2005 and in the second column 2004.
What can i do?

Hi Jens,
As I understand the scenario, you have two RKF or selections in column 1 and 2, one is restricted with variable ZYear, the other with the same variable, offset - 1 and variable ZYear provides current year.
I think there is no way to change years dynamically in a filter, but you could solve the issue by refreshing the query and overwrite default value provided by customer exit.
To achieve this, please change variable and check 'Ready for input' in change dialog..
If this shouldn't work, please let me know details a variable definition and customer exit.
Have a nice w/e
Joe

Query Drilldown does not Invoke Customer Exit Variables

We have a problem with performing a drilldown in a BEx Analyzer reprot, basically the client is a Trading company and they have inter company trading. We are using the Profit Centre as one of thre u201CFree Characteristicsu201D in the query and hence we are able to drilldown on a Characterictc by Profit Centre.
We are using a couple of BEx query variables (Customer Exit variables) to determine the inter-area and extrenal area profit centres and these profit centres will be different based on the level of Hieracry node selected when the query is initially executed. For example if we assume a hierarchy with has one root node, 3 children under the root node and 2 grand-children under each of the 3 child nodes, now if we are at the root Node of the Hierarchy then every profit centre is internal and there are no external profit centres, similarly if we are at the 2nd node (i.e. one of the child nodes) then everything under that node is internal and everything in the other 2 child nodes is external and so on.
This is where the issue starts for us, since on the report if we select the the node we want to see the results for at the query rumtime (i.e. the Customer Exit Variables are invoked at I_STEP=2 and they select the other nodes of the hierarcy if any and group them into either external or internal) then the results are correct. Now if we were to drilldown, i.e. We selected the root node and we drilldown on to see for example of the child nodes then the result are not correct, this becomes apparent when we drilldown further to the grand-child nodes.
One logical explaination is that when we are doing the drilldowns the customer exit variables are not being invoked in the BEx analyzer report and hence they are not grouping the sums for the internal and external profit centres relevent to node selected in the Drill down.
Does anyone have any suggestions regarding how to make this query work properly or show the correct results in BEx Analyzer (ideally), I have considered the Workbooks option but the client does not want Workbooks.
Please let me know if there is a program etc we can customise to ensure that the Customer Exit variables logic is used when the user does a drilldown in the query or any other way to make it work.
Many Thanks
Jack

Hi
Just to aid anyone who is thinking what to do in a similar situation, I am aware that RRI or using workbooks are a couple of good alternatives (just that these are currently not being considered by the client, hence I am asking here).. Also, if someone has Business Objects WEBI then we can satisfy the requirement by creating a new Webi Report for each of the nodes and displaying it (similar to Workbooks but much nicer and faster) or we can get the Webi to execute the variables again during the drilldown... Unfortunately the client is not using Webi either... So the solution has to be in BEx Analyzer / Query designer based...
If you have any thoughts on how I might be able to do what I want to do then please feel free, I am quite confident that I am not the 1st person to come accross this issue and someone somewhere has solved this issue.
Thanks

Concatination of Two dates in customer exit Variable

HI Expert ,
I am writting customer Exit Variable to get Records from user entered Dates .
Eg. In Variable Screen of Bex report i have 2 Variable LYDate & TY Date both of them are As "Mutiple Single Value" & "Mendetory".
If we give LYDATE and TYDATE Date range as,
LYDate - 01/2013 - 06/2013
TYDate - 01/2014 - 12/2014
So I need ABAP Code which will get Value Range from 01/2013 from LYDATE and 12/2014 From TY DATE . So Query will Get data for 01/2013 TO 12/2014 (2 Years Data).
ZCALYEAR (Cusomer Exit) = LYDATE (01/2013) TO TY DATE(12/2104).
Please provide step by step ABAP Code to Achiev above issue. Points for Sure...
Thanks,
GB

Hi,
Some code like this will solve your issue:
CASE I_VNAM.
   WHEN 'NEWVARIABLE'.
   IF I_STEP = 2.
      READ TABLE I_T_VAR_RANGE INTO LOC_VAR_RANGE WITH KEY VNAM = 'LYDate'.
      If sy-subrc =0.
          CONCATENATE LOC_VAR_RANGE-LOW(4) INTO L_S_RANGE-LOW.
          READ TABLE I_T_VAR_RANGE INTO LOC_VAR_RANGE WITH KEY VNAM = 'TYDate'.
          If sy-subrc =0.
               CONCATENATE LOC_VAR_RANGE-HIGH(4) INTO L_S_RANGE-HIGH.
               L_S_RANGE-SIGN = 'I'.
               L_S_RANGE-OPT = 'EQ'.
          APPEND L_S_RANGE TO E_T_RANGE.
        endif.
      endif.
    endif.
endcase.
Regards
Yasemin...
Just realized that you need the year. Message was edited by: Yasemin ULUTURK

Help needed in Customer exit variable

Hi Experts,
We have a scenario as below.
User enters fiscal year period.Based on the fiscal year period,entire year will be selected.
Row would contains
0fiscper3(Fiscal months from Jan to Dec)
Column contains Amount(Actual or Forecast)--There is a restricted keyfigure on amount.If value type=60 then forecast
and value type=10 then actual amount
If the user enters 002.2010 then it should give Actual values ie value type=10 for 001.2010 and 002.2010.For all values greater than 002.2010, it should give forecast values(value type=60)
Report Format.
Jan----
Actual Value(value type=10 in the column for amount)
Feb----
Actual Value(value type=10 in the column for amount)
Mar----
Forecast Value(value type=60 in the column for amount)
Apr----
Forecast Value(value type=60 in the column for amount)
May----
Forecast Value(value type=60 in the column for amount)
Jun----
Forecast Value(value type=60 in the column for amount)
Jul----
Forecast Value(value type=60 in the column for amount)
Aug----
Forecast Value(value type=60 in the column for amount)
Sep----
Forecast Value(value type=60 in the column for amount)
Oct----
Forecast Value(value type=60 in the column for amount)
Nov----
Forecast Value(value type=60 in the column for amount)
Dec----
Forecast Value(value type=60 in the column for amount)
I know that i have to create a customer exit variable for value type
But in this scenario.the value for value type may change in each row based on fisper3(month).
How can i obtain such a scenario in the customer exit
Your help will be appreciated.
Thanks,
Senoy
Edited by: senoy laxman on Feb 15, 2010 6:42 AM

Hi Senoy,
you have to create two customer exit variables for fiscal year period(0fiscper) as given below.
1. for actual values (value type=10), coding in cmod such that showing values less than and equal to user input values.
2. for forecasting values(value type=60,)coding such that showing values greating than user input values.
use the first varible in the first selction and the second varible in the second selection in the given below structure(use the structure in rows)
use the fiscal period user input varible in the third selection in the given structure below.
structure
selection - (Actual)-restrict with value 20 and first customer exit variable .
selection -(Forecast)-restrict with value type 60 and second customer exit variable.
Selection - 0fiscper
Add the key figure 0Amount in the columns or in rows(in the selection of second structure) as per your requirment.
hope this helps you.

Error while executing customer Exit Variable (No value could be determined for variable. BRAIN 632)

Hello,
I created a customer exit variable which has to show the range between the first and last day of the previous month. The query will be executed every first of the month.
Variable is declared as: Customer exit, based on 0CALDAY, Interval, Mandatory and NOT input.
When i debug the query, it is making the calculation but its not populating my variable; when I execute the query from RSRT, the output test shows a message:
ENo value could be determined for variable ZRANGE_PREVMONTH.                            BRAIN               632ZRANGE_PREVMONTH
Below the code i'm using (SAP 7.4)
***Customer Exit to calculate previous month.
IF i_step = 2.
     CASE i_vnam.
          WHEN 'ZRANGE_PREVMONTH'.
DATA: LS_RA_SID TYPE   RSR_S_RANGESID.
DATA: yyyy(4) TYPE n.
DATA: mm(2) TYPE n.
DATA: dd(2) TYPE n.
DATA: fst_date LIKE sy-datum.
DATA: fst_date2 LIKE sy-datum.
LOOP AT i_t_var_range_c INTO loc_var_range
    WHERE vnam = '0DAT'.
      dd = sy-datum+6(2).
      mm = sy-datum+4(2).
      yyyy = sy-datum+0(4).
      fst_date2 = sy-datum.
      IF dd = '01' AND mm = '01'.
        mm = '12'.
        yyyy = yyyy - 1.
      ELSEIF dd = '01' AND mm <> '01'.
        mm = mm - 1.
      ELSEIF dd <> '01'.
        mm = mm - 1.
      ENDIF.
      CLEAR: fst_date.
      CONCATENATE yyyy mm '01' INTO fst_date.
      fst_date2 = fst_date2 - 1.
      CLEAR: ls_ra_sid.
      ls_ra_sid-sign = 'I'.
      ls_ra_sid-opt = 'BT'.
      ls_ra_sid-high = fst_date2.
      ls_ra_sid-low = fst_date.
      APPEND ls_ra_sid TO e_t_range.
ENDLOOP.
ENDCASE.
   ENDIF.

Hi Fernanda,
Try this:
DATA: LS_RA_SID TYPE   RSR_S_RANGESID.
DATA: fst_date LIKE sy-datum.
   CASE i_vnam.
          WHEN 'ZRANGE_PREVMONTH'.
fst_date = sy-datum - 1.
concatenate fst_date(6) '01' into ls_ra_sid-low.
      ls_ra_sid-sign = 'I'.
      ls_ra_sid-opt = 'BT'.
      ls_ra_sid-high = fst_date.
      APPEND ls_ra_sid TO e_t_range.
ENDLOOP.
ENDCASE.
   ENDIF.
Just post here for any queries..
Regards,
Loed

Customer-Exit variable on 0TCAIPROV

Hello,
we're currently working on the migration of 3.x reporting authorizations into the new analysis authorizations.
Because of the existing requirements we have to have different analysis authorizations on different infoproviders and we want to use infoobject 0TCAIPROV to do this.
But since we have a lot of infoproviders we don't want to maintain the relevant infoproviders in each analysis authorization and because we cannot use infoareas to assign the infoproviders we have created a customer-exit variable for 0TCAIPROV that produces the list of relevant inforpoviders.
So far, so good. But when running queries with this authorization we always the EYE001: No authorization for InfoProvider. So we debugged the query and saw that the customer-exit is being processed. But it seems that the infoprovider check does not support customer-exit variables.
Does anybody have experience with this? Has anybody done this?
Regards,
Jens

Hi,
we have the same issue with the test of autho assignement (manual).
Function module can help you: rsec_get_auth_for_user.
The Autho for a user is in the class S_RS_AUTH:
We try by this way:
data: wa_rsecval type rsecval,
      ta_rsecval type table of rsecval,
      wa_rsecval2 type rsecval,
      ta_rsecval2 type table of rsecval,
      wa_rsecuserauth type rsecuserauth,
      ta_rsecuserauth type table of rsecuserauth.
Autorisations with object w_iobjnm.
select * from rsecval
           into table ta_rsecval
           where tctiobjnm = w_iobjnm.
Autorisations with l'infoprovider.
if w_infoprov is not initial.
    select * from rsecval
             into table ta_rsecval2
             where tctiobjnm = '0TCAIPROV'.
endif.
w_subrc = 4.
Assignment cherch
select * from rsecuserauth
           into table ta_rsecuserauth
           where uname = sy-uname.
Hope it help's

Customer exit variable issue

Hi Friends,
Below code using to find the Quarter values from Year,
For ex: If ZU1_AY_YEAR = 2010 (User entry variable), I need Quarter values like 2009 Q1.
ZZ1_Y_X6 is customer exit variable againt Quarter. Here Quarter values are always 2009 Q1,2009 Q2..etc.
WHEN 'ZZ1_Y_X6'.
      IF i_step = 2.
        CLEAR l_s_range.
        READ TABLE i_t_var_range INTO ls_t_var_range
          WITH KEY vnam = 'ZU1_AY_YEAR'.
        IF sy-subrc EQ 0.
          ls_t_var_range-low = ls_t_var_range-low - 1.
          CONDENSE ls_t_var_range-low NO-GAPS.
          l_s_range-sign = 'I'.
          l_s_range-opt = 'EQ'.
          CONCATENATE ls_t_var_range-low 'Q2'INTO l_s_range-low SEPARATED BY space.
          APPEND l_s_range TO e_t_range.
        ENDIF.
      ENDIF.
This code/customer exit variable is providing description of the values like 2009 Q1 for the text variables but not getting values through this variable (ZZ1_Y_X6) restriction.
Hope you got a point. Other wise please let me know if need more details.
XYZ is the keyfigure --> restricted with ZZ1_Y_X6 --> as per code value is 2009 Q1 --> But not getting key figure values into report as per this 2009 Q1
                                  --> Rows of the query --> created text variable with replacement Hence value/description is getting
Please advise?
Thanks,
RK

Hi,
You cannot use the same variable for text and for restricting the data. I think you have written the code for the text variable. However, for restricting you need to use (or create) a different variable for the 0CALQUARTER InfoObject
And you must not use the letter 'Q' in the cust exit for the filtering variable. The Quarter values are stored as 20091 (first qtr of 2009), 20092 etc.
So for the filtering variable, the concat statement will be
CONCATENATE ls_t_var_range-low '2'INTO l_s_range-low.
Regards,
Suhas

Code (ABAP) for the Customer Exit Variable (CMOD)

Scenario
An employee can purchase any no of policies in a day or month.each policy will have start date and expiry date.
My requirment
Count all the policies(valid) by employee on a ranges basis exception reporting
(0-10;10-20;20-30;30-40) and then able to drill down by policy start date and expiry date.
As per the requirment is to show policies that employee had with in the give date intreval which are not yet expired (active) i need to write a condition that will count only policies whose Expiry date is > Current calender day
As Policy Expiry Date is a char i am converting it to KF using fourmala variable so that i can write a condition on it using current cal day formula variable sap exit
Requirment:
Need a code for SAP exit variable which will meet the following requirment
There are the following 2 variables in the query
1) A variable (User Input)(Date Range) on Policy Start Date and
2) Authorisation Variable which is based on Authorisation Object(Analysis Authorisations)
I need a SAP Exit variable (CMOD) that will
BAsed on the user entered Policy Start date it has to pick all the policy exiry date of the policies and display all the policies whose expiry date is greate than Sy Date (Current Date) and also if Policy Expiry Date is blank or # it has to display
Arun supplied me with the below code...but i think it doesn't include blank expiry date or #...as i am new to ABAP please update me with releavent code
Policy Start Date : ZPST_DTE
Policy Expiry Date: ZPSP_DTE
Variable (Type:Customer Exit) on Expiry Date: ZEEXP_DTE
Arun's Code:
IF I_STEP = 1.
CASE V_NAME
WHEN 'X' " X is the variable u created for the exit
l_s_range-low = SY-DATUM.
l_s_range-opt = 'I'.
l_s_range-sign = 'GT'.
APPEND l_s_range TO e_t_range.
END CASE.
Please modify above code to include Blank or # values of Expiry Date
Thanks Arun
Please ask if you need further info as this is urgent
Thanks

Hi Arun,
Thanks for the help...will definetly assign points
(Closed the previous thread)
Please spare bit of ur time as this is my first ABAP Code
Can i include 2 restrictions..# and Variable (Customer Exit)...But how can i include Records with Blank Values
As the data from Source system the expiry date is filled up with either Date or # or Blank...my requiorment is to include all 3 and
Question:
As there are 2 other variables defined ..one on Policy Start Date (User input date intreval) and Location (Authorization Variable..Analysis Authorisations)...Do i need to change I_STEP in the code
(Req: Reports shows all the(still valid) policies emp has purchased between 2 give date (Variable on Policy Start date)
IF I_STEP = 1.
CASE V_NAME
WHEN 'X' " X is the variable u created for the exit
l_s_range-low = SY-DATUM.
l_s_range-opt = 'I'.
l_s_range-sign = 'GT'.
APPEND l_s_range TO e_t_range.
END CASE.

Error in the ABAP Code for Customer Exit Variable

Could you please update me what is the wrong with the below ABAP Code developed for Customer Exit Variable in BW
i created a Variable (ZVWKNO) of Customer Exit,Single Value ,Mandatory and Variable is ready for input
In CMOD i had written the below Code:
When 'ZVWKNO'.
DATA: WEEK(2) TYPE N,
WEEKNO(2) TYPE N.
IF i_step = 1.
l_st_date = SY-DATUM.
CALL FUNCTION 'DATE_GET_WEEK'
EXPORTING
DATE = l_st_date
IMPORTING
WEEK = l_fn_week.
CHECK sy-subrc = 0.
WEEK = l_fn_week+4(2).
If WEEK 0.
WEEKNO = WEEK - 1.
l_s_range-low = WEEKNO.
l_s_range-sign = k_sign_inclusive.
l_s_range-opt = k_option_equals.
APPEND l_s_range to e_t_range.
ENDIF.
ENDIF.
But when i execute the query the default value is not populated with Week-1 No in the variable screen
Please update me what went wrong
Thanks

Case ZVWKNO.                "write this with out comments
When '1'.              "write the value that needs to equal with value in varaible ZVWKNO after when in sungle quotes
DATA: WEEK(2) TYPE N,
WEEKNO(2) TYPE N.
IF i_step = 1.
l_st_date = SY-DATUM.
CALL FUNCTION 'DATE_GET_WEEK'
EXPORTING
DATE = l_st_date
IMPORTING
WEEK = l_fn_week.
CHECK sy-subrc = 0.
WEEK = l_fn_week+4(2).
If WEEK 0.                                    "check this Week Minimum is '01' and Maximum '52'
WEEKNO = WEEK - 1.
l_s_range-low = WEEKNO.
l_s_range-sign = k_sign_inclusive.
l_s_range-opt = k_option_equals.
APPEND l_s_range to e_t_range.
ENDIF.
ENDIF.
Prabhudas

How to get the current month value for a customer exit variable?

How to get the current month value for a customer exit variable?
And also if we have an InfoObject with date value (including date, month, year), then how to derive the month value from this date type of Char.?
Thanks!

Hi Kevin,
Check here........
Re: Customer Exist for "From Current Date To Month End"
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/25d98cf6-0d01-0010-0e9b-edcd4597335a
Cal month
Regards,
Vijay.

How to use customer exit variable in the report

Dear All,
i want to use a standard customer exit variable in the report properties.
In the Bex Query Designer right hand bottom you will find two buttons "Properties" and "Task". Click on task you will get different option. Choose properties from there and then select "variable sequence tab".
I need to add a standard variable there. How can i achieve it?
Appreciate your early help.

You need to add variable to corresponding charctertic then you can get that varaible for sorting the sequence....
If 0CUST is the varaible then you need to assign it 0CUSTOMER then 0CUST will be available for the sequence.
Edited by: shanthi bhaskar on Apr 2, 2009 5:41 PM

Looking for an ABAP-code for the customer-Exit Variable

Hello,
I have defined a Variable (Interval) which should be processed through Customer-Exit on characteristic Supplier-Date (date format). This Customer-Exit Variable is called ZDATE.
We have another time characteristic Fiscal year / period (0FISCPER) which has single mandatory input variable for ex. 003.2011. This input variable is called ZFISCPER.
Now I have to write an ABAP-Code where the customer exit variable ZDATE is derived (fiscal last year to last period) from input variable ZFISCPER in INCLUDE ZXRSRU01.
Means when the input variable (ZFISCPER) is 003.2011 then the customer exit variable ZDATE should be calculated in INCLUDE ZXRSRU01 as 01.01.2010 u2013 28.02.2011 (fiscal last year to last period).
Since I am quite new in ABAP, I will be grateful if you could write me sample ABAP for this.
Many thanks.

Hi,
should be something like:
DATA: l_s_range TYPE rsr_s_rangesid,
input LIKE sy-datum.
When 'ZDATE'
CONCATENATE '0101' 0FISCPER+3(4)-1 into l_s_range-low. "You get 01012010
CONCATENATE '01' Fiscper+1(6) into input. "You get 01032011
l_s_range-high = input-1. "You get 28022011
APPEND l_s_range TO e_t_range.
Greetings
Roman

Logic of the Customer Exit Variable

Hi Experts,
Could you please explain me the logic (Functionality) of the below Customer Exit Variable .....
WHEN 'AKFR05'. "M-5 monthly forecast version
        CALL FUNCTION 'END_TIME_DETERMINE'
          EXPORTING
            duration         = -5
            unit             = 'MON'
            factory_calendar = l_LACID
          IMPORTING
            end_date         = l_fn_dte
          CHANGING
            start_date       = sy-datum
            start_time       = sy-uzeit.
        CHECK sy-subrc = 0.
        CLEAR l_s_range.
        l_s_range-low(4) = 'LGMN'.
        l_s_range-low+4(6) = l_fn_dte(6).
        l_s_range-sign = k_sign_inclusive.
        l_s_range-opt = k_option_equals.
        APPEND l_s_range TO e_t_range.
Thanks in Advance

Thanks for the update...
The First Part
        CALL FUNCTION 'END_TIME_DETERMINE'
          EXPORTING
            duration         = -5
            unit             = 'MON'
            factory_calendar = l_fcalid
          IMPORTING
            end_date         = l_fn_date
          CHANGING
            start_date       = sy-datum
            start_time       = sy-uzeit.
For Example:
    Current Date : 27.04.2009
By using the FM END_TIME_DETERMINE the END_DATE (27.11.2008) is exported to l_fn_date
Could you please explain me the logic after exporting the end date
l_s_range-low(4) = 'LGMN'.
        l_s_range-low+4(6) = l_fn_date(6).
        l_s_range-sign = k_sign_inclusive.
        l_s_range-opt = k_option_equals.
        APPEND l_s_range TO e_t_range.
Thanks in Advance

Customer exit variables using the Table

Hi Experts,
I'm having the following scenario.
I have created the below table
OGVERSION   Fiscal Year1 OGVERSION1 Fiscal Year2   OGVERSION2
    001                   0                   100                  -1                  100
    002                   0                   100                    2                  200
      007                  3                     200                 1                   300
Now i need to create four customer exit varibles by using the OGversion value which is the variable by fillign with manula input. Here Fiscal year1 & Fiscalyear 2 fields having the values like 0,1,2,-1 means 0 --> Current Year, 1 --> CurrentYear +1 , 2 --> Current Yr +2, -2 --> Current Yr-2...like that.
Please let me know If anybody knows the ABAP for create these customer exit variables.
Regards,
Navin Achanta

Thanks for the reply. following is the code that is used in the exit.
does the code below affect the performance.
select FIELD1 from TABLE into table INT_TABLE
                                       where TCTUSERNM = SY-UNAME.
      if sy-subrc eq 0.
        loop at INT_TABLE into WA_INT_TABLE.
          l_s_range-LOW = WA_INT_TABLE-field1.
          l_s_range-SIGN = 'I'.
          l_s_range-OPT = 'EQ'.
          append l_s_range to e_t_range.
        endloop.
      endif.

Customer Exit Variable to populate one of the three dates

Similar Messages

Maybe you are looking for