Customer Master maintenance with Vertex

Hi,
We have tax determination switched on using Vertex. As a result, a call to Vertex is done whenever a customer master is created / changed.
However, the call is being made to Vertex for customer hierarchy master data records as well. The customer hierarchy node defined may not have a specific address and we are looking for any ways in which the call to Verex can be de-activated based on account groups.
Would appreciate suggestions from the forum on how this could be achieved.
Regards
Rohit Zalani

Rohit-
We are using Vertex and have set up the jurisdiction code 7700000000 for customers outside the US. We manually set this jurisdiction code and then the customer isn't charged taxes.
Have you exempted these customers in Sales Area Data -- Billing Documents-- Tax Classification?
Or on Vertex central - set up a Tax Assist Rule based on the customer account group- when the information is passed to Vertex, it will first hit this rule and then would return exempt status.

Similar Messages

Adding Custom Breadcrumb for SharePoint 2013 Custom Master-Page With A Custom Separator.

Hi All,
I have successfully converted an HTML file to a SharePoint 2013 Custom Master-Page with relevant style sheets. But when I used within the SharePoint site I could not find the breadcrumb. So I want to know how to do that? For that breadcrumb I need a custom
separator like an arrow like in the below.
As you can see the separator is a custom built one. To have this custom separator in my HTML I have used the following code snippet.
<div class="breadcrumb-desktop">
<span class="breadcrumb-links"><a href="#">SharePoint Site Home</a></span>
<span class="breadcrumb-links"><a href="#">Sub Link 01</a></span> Active Page
</div>
The styles are as like in the below.
.breadcrumb-desktop {
width: 100%;
font-family: Arial;
padding: 23px 0 40px;
float: left;
font-size: 0.75em;
line-height: 1.25;
.breadcrumb-desktop > span.breadcrumb-links:after {
content: " \203A ";
white-space: pre;
I have tried the following code snippet within the SharePoint site as


But it did not display as I wanted.
So how am I supposed to insert these to my Custom Master-Page's breadcrumb and style them? Please could someone help me to solve this?
Thanks and regards,
Chiranthaka

Hi Chiranthaka,
Please use the following code snippet in your html master page.
<div class="CustomBreadcrumbs">
You are here:






</div>
Here is a thread for your reference:
https://social.msdn.microsoft.com/Forums/office/en-US/daabd903-df98-41da-80d8-6a942d06980e/add-breadcrumb-to-custom-master-page-html-file?forum=sharepointcustomization
We can also customize a breadcrumb control, then add it in master page.
http://msreddysharepoint.blogspot.com/2013/01/custom-breadcrumb-navigation-in.html
Best Regards
Dennis Guo
TechNet Community Support

Facing Problem in creation on Customer Master Record with reference

Dear SAP Experts,
I am making a New Customer master record with referenec to existing one. Account Group """ Stock Transfer - Depot""" do not use internal no assignment, we put external no to customer code. but when we enter the customer master with reference to existing one, system shows the error.....enter a no between A001 and Z999.
Customer Record Details-
Account Group - Stock Transfer Depot
Customer - 1101
Compnay Code- 1000
Sales Organisation - 1000
Distribution Channel -20
Division - 01
Reference:
Customer - 2001
Comapny Code - 2000
Sales Organisation - 2000
Distribution Channel - 20
Division - 01
Error: ENTER A NO BETWEEN A001 AND Z999
I m not getting why system showing this type of error, should i need to configure new customer code sumwhere in IMG if yes please let me know.
Lokking forward for your quick response on the same.
Regards
Parul Deshwal

Hi Parul Deshwal,
- The number range is created in XDN1.
- The number range is assigned to the account group "Stock Transfer - Depot" in SAP Customizing Implementation Guide>Financial Accounting>Accounts Receivable and Accounts Payable>Customer Accounts>Master Data>Preparations for Creating Customer Master Data>Assign Number Ranges to Customer Account Groups
Remember - If you are entering an external number it generally means the number is created in an external system and replicated to your system.
Help - Check what external number was used last by doing SE16 on table KNA1 and use the account group "Stock Transfer - Depot" as a selection parameter.
Best regards,
Glynn

Create customer master record with reference

Hello guys,
I'm trying to create a customer master record with reference using XD01 (existing in the referent company code only) but no data are copied at the general level of the customer (not only the address data but also these contained in KNA1). Is there something I can do in order to get the referent data?
Thanks

Only data that does not refer directly to the customer/vendor is copied from the reference account to the new account, that is,no address information, and so on.

Create customer master record with reference to existing division

how to create customer master record with reference to existing division?

what type of reports sd consultant configure in implementation project?and in supporting project?

Customer master (XD02) with LSMW

Hi All,
I am trying to update customer master (XD02) with LSMW. But i the First step i.e. Maintain Object Atrributes... when I clic batch input recording & try to give a recording name in th second line... it throws an error saying "Enter a vali Value"... It does not accept a recording name & does not allo me to click Recording : Overview button .
Has this error to do anything with the settings??... The sandbo in which I am working has the component version "SAP R/ Enterprise"(found out by System --> Status) ... Please Help

hI,
You will have to create recording first & then select from drop down box of "Batch Input".
To create recording pls follow this:
Go TO T code : LSMW
Create Project, Subproject & objects.
In Maintain Attributes - press F8
In menu bar
Goto---> recording overview
Now you can create your recorindg which wil be avaliable for selection.
rgds,

Not able to create a customer master record with US as the country code

Hey All,
I am not able to create customer master data in the Transaction Code XD01/FD01 with the country code as US.
The error message for the same is *NO JURISDICTION CODE* COULD BE DETERMINED. I have checked the tax code settings but could not locate the problem.
I have checked the field in the account group(OBD2) but tax code is in optional status
and also checked the country settings for US in the transaction code OY17 still the same error message,
but when I tried checking the settings for a different company code's customer data base (us in county code)
I can see that there is a number mentioned in the address tab under tax jurisdiction field (beside time zone) which is not populating for this company code.
So, do anyone know where exactly we mention this number so that it populates in that field of address.
Hope am clear.
hope to receive a solution
thanks & regards
vinila

Hi,
You need to maintain the JURISDICTION CODE for country US. This JURISDICTION CODE code mainatanance purely FI/CO part.. it depends on the country's tax procedures.. Better take the help from your FI/CO consultant..
Menu path for Defining tax jurisdiction code
IMG -- Financial accounting -- Financial accounting global settings -- tax on sales and purchases -- basic settings -- define tax jurisdiction
reward if helps
Muthu
Edited by: Muthupandiyan on Mar 14, 2008 11:09 AM

Not able to create customer master data with country code US

Hey All,
I am not able to create customer master data in the Transaction Code XD01/FD01 with the country code as US.
The error message for the same is NO JURISDICTION CODE COULD BE DETERMINED. I have checked the tax code settings but could not locate the problem.
Request you to provide me with a solution.
Thanks & Regards
VK

Hey all,
I have checked the field in the account group(OBD2) but its in optional status
and also checked the country settings for US in the transaction code OY17 still the same error message, but when i tried checking the settings for a differnt company code's customer data base i can see that there is a number mentioned in the address tab under tax jurisdiction feild (beside time zone) which is not populating for this company code.
so, do anyone know where exaclty we mention this number so that it populates in that field of address.
hope am clear
hope to receive a solution
thanks & regards
vinila

Custom Master Page with Code behind in SharePoint 2013

Hi All,
I want to create the Custom Master Page in Sharepoint 2013 with Code file in it.
Is it possible to create? if YES the how i can achieve it??
PD

To add something to Amit's reply, you can refer to the following link on how to create master page with code behind if you are new to ASP.net.
Walkthrough: Creating and Using ASP.NET Master Pages in Visual Web Developer
http://msdn.microsoft.com/en-us/library/ehszf8ax(v=vs.90).aspx
Miles LI TechNet Community Support

Help req for check customer table maintenance with XD02 if not throw error

hello ABAP GURUS,
check customer of the table maintenance with XD02 if not throw error i have given the codition for passing the values in the table but before that it has to check whether the customer i am passing in to the table is a customer from xd02.Here whatever no i am passing it is accepting it should not happen, but when i give the customer which is not a customer it should not accept but it has to throw the message as 'customer does not exist.Its urgent please help me
TYPES: BEGIN OF TY_KNVI,
KUNNR TYPE KUNNR,
TATYP TYPE TATYP,
TAXKD TYPE TAKLD,
END OF TY_KNVI.
DATA : VALIDFROM TYPE GUEBG,
VALIDTO TYPE GUEEN.
DATA : IT_KNVI TYPE STANDARD TABLE OF TY_KNVI,
WA_KNVI TYPE TY_KNVI OCCURS 0 WITH HEADER LINE.
DATA : V_NAME TYPE SYUNAME.
SELECT KUNNR
TATYP
TAXKD
FROM KNVI
INTO TABLE WA_KNVI
WHERE KUNNR = YYV_CFORM-KUNNR
AND TATYP = 'ZCST'
AND TAXKD = '1'.
V_NAME = SY-UNAME.
YYV_CFORM-ENTEREDBY = V_NAME.
IF SY-SUBRC NE 0.
MESSAGE E000(E4) WITH 'Please change the tax classification of ZCST as' '1' ', in Sales Area Data'.
ENDIF.
I have used the following code to enter the data into the table maintenance it is working fine and throwing the error when the tax type is not the one which i have given in the select statements but the problem is when i have given the customer no which is not there in the XD02 tcode, it is accepting and showing the error message as MESSAGE E000(E4) WITH 'Please change the tax classification of ZCST as' '1' ', in Sales Area Data'. now i have to check the customer no from XD02 and if it is existing in that tcode it should allow to save in the table maintenance otherwise throw a message as the 'Customer no does not exist, this I am unable to write so how can i check please help me .
thankx in advance.
Edited by: soni khadary on Apr 22, 2008 7:55 AM

Hi Kelly,
I guess <wa_tab>-handle_style is of type lvc_t_styl therefore you can do the following:
ls_edit-style = cl_gui_alv_grid=>mc_style_enabled.
"I assume you know your non-key fields' names so you can use subrotuine to perform update on each of them
ls_edit-fieldname = 'First field name' .
PERFORM update ls_edit.
ls_edit-fieldname = 'Second field name'.
PERFORM update ls_edit.
ls_edit-fieldname = 'Third field name'.
PERFORM update ls_edit
FORM update USING fs_edit type lvc_s_styl.
field-symbols: <style_tab> type lvc_t_styl,
                     <style_wa> type lvc_s_styl.
LOOP AT <tab> ASSIGNING <wa_tab>.
   if e_row = sy-tabix .
     "get you style table
     assign component 'HANDLE_STYLE' of structure <wa_tab> to <style_tab>.
     "as <style_tab> is typed fully you can read the row you are interested in
     read table <style_tab> assigning <style_wa> with key fieldname = fs_edit-fieldname
     if sy-subrc = 0.
       "update this entry
        <style_wa> = fs_edit.
*        modify table <style_tab> from <style_wa>.
     endif.
   endif.
endloop.
endform.
Note!
Though, this should work, the use of RTTI as Uwe suggested would be best practise approach as far as dynamic programming is concerned. Anyhow it is still up to you which one you pick.
Regards
Marcin
I noticed now that this line is not necessary
modify table <style_tab> from <style_wa>.
as we simply are working with field symbols, so changes made to <style_wa> are already visible in that table <style_tab>.
Edited by: Marcin Pciak on Mar 15, 2009 12:44 PM

Custom Master Page with Custom Page Layout

Hi All,
I have created a Custom SharePoint Master Page. In that Master Page I have created a custom Header & Footer. In between the header and the footer I created a space to put page's content.
However I have created a page using that master page and it was successfully published.
After that I wanted to create a Custom Page Layout using that Page previously created. That also was a successful one. But when default Page Layouts in SharePoint 2013 inserted to a page it shows an area that can add content. But in my Page Layout inserted
to a page it does not show like that.
So what have I missed when I created the Custom Page Layout? Could you kindly someone tell me how to solve this matter?
Thanks and regards,
Chiranthaka

Can you confirm that your custom page layout has the same WebPart Zones as the default one? They need to be if you wish to see content that was added with the default page layout.
Nikolas Charlebois-Laprade Microsoft Certified Professional & Software Engineer http://nikcharlebois.com

Custom Master Page with Top Navigation and Left Navigation

Hi All,
I have successfully converted an HTML Page to a SharePoint 2013 Master Page. I also created a Custom Page Layout. Using both them I have created my SharePoint Site with 30+ pages. Each page is consisted with the Top Header Navigation as it is inheriting
from the Master Page I have used. Now I need the left navigation inherit from the master page also. It gives me the advantage of updating it from the master page and affects it through the entire SharePoint Site.
But at the moment I am inserting the Left Nav using a web part as an HTMl code snippet individually for each and every page. If needs a modification I have to go through all the pages and do the modification. This is not convenient also. I want to this left
nav like the SharePoint Current Navigation alternative but within my Page Layout.
Is there an option to chat within these forums?
Could someone help me to solve this problem?
Thanks and regards,
Chiranthaka

Hi,
In your HTML Page Layout, is your "current navigation" in its own content place holder, such as "PlaceHolderLeftNavBar" or did you add the current nav to the "PlaceHolderMain"?
Can you add CSS that hides the left nav found in each content page so that you do not have to manually remove the left nav? Then you could simply add the current nav back into the Master Page.
Eric Overfield - PixelMill -
ericoverfield.com -
@EricOverfield

Create customer with reference to customer master

Hi,
If the user creates customer master (XD01) with reference to another customer master then system should not copy some of the fields. How can I restrict this in SAP. Is there any Copy control functionality for customer master to customer master?
Regards,
Soumen

Hello,
As far as i know in Standard SAP system, when we are copying or even creating a Customer
Master Recording in XD01 with reference to a customer, in case of the basic data i.e. General Data, the
datas that are copied are
1. Country.
Under Company Code data, the following are copied,
1. Reconcilation Account.
Under Sales Area Data the following are copied,
1. Currency.
2. Shipping condition.
3. Account assignment group.
4. Taxes.
Regarding your question, you can change the data and there is no concept of copying control here.
Regards,
Sarthak

Copy with reference to Customer Master

Hi experts,
If the user creates customer master(XD01) with reference to another customer master then system should not copy all the fields say Name and contact number. How can I restrict this in SAP.
Can any body helps???
Thanks!!!
Poorna

Hi.
Normally when we copy existing customer to a new customer we use XD01 with reference and we don't select the items we don't want to copy or we delete the value when we are copying.
But if you want user to have a feature through which when ever they create a new customer using the existing customer they should not copy the recon a/c for Ex, than you have to create a Z transaction by copying the orignial XD01 and have your restrictions coded there..
Regards

Custom SharePoint Master Page with Content Editor Web Part.

Hi All,
I have created a custom SharePoint Master Page to apply within my SharePoint Site and it was a success.
When I want to add the content I have to use the script editor web part and add HTML snippets. Then the styles will reflect correctly. But when I use content editor web part some of the styles do not reflect. Lets assume that if I want to add a H2 with the
custom color, the color do not show in the ribbon. And how SharePoint know that this is an <h2> and reflect the other styles like padding, margin and so on.
Please can someone help me to solve this.
Thanks and regards,
Chiranthaka

Hi,
From your description, my understanding is that you want to add CSS code in your customized Master Page with content editor web part.
I tested your issue in SharePoint Designer, and I added CSS code successfully.
I accomplish your requirement with steps below:
Add a content editor web part in a list and add some CSS code in the web part.
Open SharePoint Designer, enter the master page.
Insert a content editor web part under INSERT tab in the Ribbon.
Open the list that have edited in step1 in the SharePoint Designer.
Copy code from the list to the Master Page as the screenshot below.
The screenshot below is my result:
In addition, why do not you add CSS code just with <style> tag in your page? Just add CSS code as below(in this method, you do not need any web part.):
<style>
h2{
background-color:green;
</style>
Best Regards,
Vincent Han
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Customer Master maintenance with Vertex

Similar Messages

Maybe you are looking for