Customer no moving into GTS due to Postal code error.

Hi
I need your help. While pushing customer form R/3 in to GTS it's showing ZERO partner process. Then I checked in GTS in the BP logs it showed me that postal code has to contain 7 digits.
But in R/3 customer master record it's taking only 6 digits it has set up accordingly. So it's not accepting 7 digits. So what could be the setting so that I can look into it ?
Thanks in Advance.
Best Regards
Sits

Hello Sits,
check in GTS customizing
IMG --> SAP NetWeaver --> General Settings --> Set Countries --> Set Country-Specific Checks.
In here are country specific checks. One of them is also length of postal code.
Check whether for the country of your customer is 7 digit required for the postal code. Then change it to 6.
Best regards,
Gabriel.
PS: To be sure your countries in GTS are aligned with the Feeder use simple "adjustment" in the Utilities to compare/change via RFC to ERP..

Similar Messages

I can't upload images into CS6 due to a plugin error that hasn't occurred before.

As the title says, I keep getting an error when I try to upload an image into CS6. It hasn't done this before, and I don't know what to do. I've even tried opening my previous images I've used in works before in CS6 and they are all greyed out as well. I really need some help, any is appreciated. Thanks.

You can't open the image file in InDesign.
Go to File-->Place and place the image file in InDesign

HT1212 How I restore iPod touch disabled due to pass code error .know i know the pass code

how i restore the disabled i pod due to passcode error

Not knowing what you mean by passcode error:
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

One time customer postal code in sales order

hi
For the one-time customer, it is required to input the postal code in sales order. How to disable it? As I already disable it in customer master. pls advice. thanks

Dear Friend,
The mandatory feilds in the customer Masters can be set to non mandatory in the account group sequence.
Go to transaction OBD2 account group change.
Then select your account group of your customer.
Tehn select the address feilds you will find the customizing of the entries.
Whether it is mandatory supperreses or optional entries.
Now you can make it optional entry.
reward points if helpful,
regards,
Amlan Sarkar

Clearing the the street,Postal code and city in partner tab at sales order

Hi Experts,
I have a requirement like in sales order header or Item, In partners tab, when they are selecting the particular partner function like CR and the customer number is 500, and if they press enter then automaticaly it fetches the name,street,postal code and city at the right side for that entry. My requirement is like for particular customer 700, they want to hide the customer address in that Partner tab while sales order creation VA01. If they select the partner function CR and customer 700, after pressing enter, it shouldn't fetch the automatic address of that customer. They just want the customer name and remaining fields like street,postal code,city should be blank.
Can you please let me know how to reach this requirement ate sales order creation or change level in partner function tab.
I test these exits EXIT_SAPLV09A_001 to EXIT_SAPLV09A_004 but no use. Let me know possible ways to achieve this?
Any idea on these?
Thanks in advance ,
Edited by: dolly B on Jan 18, 2010 11:36 AM

Hi,
This is happening because you have not maintained your data in sales order.
Billing document takes the reference of order and delivery document for taking the data.
Now if you donu2019t maintain your partner function in order nor in delivery then it wont be determine in billing document.
If you want ZZ to shown in billing document then you have to make that function visible in sales order.
While creating sales order it will take it from customer master data but when you are creating billing it wont search in customer master data it will search in sales order only.
You can do one thing make that function non modifiable in partner determination procedure.
So it cant be change in sales order.
But I want to know why you want that should not be visible in sales order.
Hope so I will be correct with my explanation.
Regards
Raj.

Postal Codes are not reflecting in MSA

Hi All,
Please be informed that the change Postal codes in CRM online are not reflecting in MSA. We are using SP07 at the moment.
As a temporary work around we have used the transaction: crm_bupa_send for reflecting the business partners in msa. Do we have a permanant fix as we not sure about the customer list who got affected with the Postal Codes.
Thanks,
Vikram Donthy.

Hello All,
Any updates please?
Thanks,
Vikram Donthy

Postal code

Dear All
In SAP, "Postal Code" is mandetory field. But I want to make it unmandetory
Please help me out.
Eknath Dalvi

Hello Friend,
I think u know the procedure how to do it, just to make it more clear I am giving you step wise how to do,
01. Go to '<b>OVT0</b>', find your account group and then display that.
02. Now give a double click on general data.
03. Now double click on address.
04. Now select the optional entry radio button.
05. And save it.
Now you can create customer master and yoou will have the postal code as optional field.
<b>And will not have any bad impace nywhere</b>.

Error in Postal code .

Postal code error for country XX.
What table is used to configure postal code.

Check the following navigation :
Goto SPRO -> click on IMG ->Basis components ->Basis Services -> Address management -> Regional structure /City file ->postal code
Transaction code :
Creation : SR30
Change : SR31
Display : SR32
Table is ADRPSTCODE
Hope it helps you
Thanks
Seshu

Invalid postal code

Hi everyone,
I'm giving correct postal code during registration of my iphone 4S.But its not accepting code.I bought my phone from Saudi arabia but activated in india.I'm able to make calls,messages,WIFI,internet.I'm not able to download any apps.Please help me out.

I have tried that. Once you click on request repair it takes you to http://depot.info.apple.com/ipod/ which is .com instead of .ca, so it makes no difference. At the bottom of the page you can choose where you live though, and I choose Canada each time, but it still gives me the error.
I tried it with a different address as well, and that gave me the same postal code error, so Im guessing there's something wrong with their site, or perhaps my computer. Ive yet to try it on a different computer. If that doesnt work either though, Im going to phone them.

How to know data in data moved into GL

Hi All,
I have doubt could you clarify it. How can we know that data available in AP and AR is moved into into GL. If Gl_interface is going to act here. How does Gl_interface identify the data. Can you explain me.
Thanks & Regards,
pallis

Hi Pallis,
the flow of data is like this .....
Step 1 - Recording of Transaction in AR or AP ...
System Action - Transaction details are recorded in base tables of specific modules, i.e. for Payables it would get stored in AP related tables and for Receivables it would get stored in AR or RA tables ....
Step 2 - Transaction recorded in AR or AP is accounted ..
System Action - When you run the concurrent process of Create accounting from AP or AR, system creates accounting entries for the transactions and these are stored in XLA tables and not in AP or AR tables ....
Step 3 - Entries transferred to General Ledger ..
System Action - One should always remember that ONLY ACCOUNTING ENTRIES are transferred from subledger modules such as AP or AR to the GL and not the transaction related information. Hence, the accounting entries that are generated and stored in XLA tables are not transferred to General Ledger by running the concurrent program Transfer entries to General LEdger ...
When this operation is carried out, system updates a column in XLA table to mark the entries that are transferred to GL, in order to prevent the duplication ....
So to answer your question ...
1) So when ever data loads into AP and AR tables simultaneously the data is moved even into XLA tables
==> NO, moving the transaction data does not really update XLA tables, these are generated by system automatically and cannot be migrated manually ... this would be generated by running the Create Accounting concurrent program from respective module ...
2) Is there any column to map with ap and ar tables so that record 1 is from ap and record 2 from ar
===> Most of the XLA tables would have a column called Application_Id, this refers to the module from which this accounting entries are generated ... for Payables the application id is 200 and for receivables it is 222 ... these values are system defined hence same for all environments across the globe ...
3) In GL responsibility I find sources where we select the list of sources and run the import and how can we import 3rd party source journals in Import journals
==> If you are importing the entries from standard oracle module such as Payables, Receivables and Assets the source name would be available in the List of values by default, however if you are importing from 3rd party system then you have to define a 3rd party software as a custom source .. only then it would appear in the journal import stage ....
Third party tool should have created the accounting entries by itself, and only send the accounting data to Oracle General Ledger and not the transaction related information ..... if Oracle is expected to create accounting entries for transactions recorded in 3rd party systems, you have to configure FAH as well .....
Regards,
Ivruksha

Postal Code and Region relationship in AR customer

Hi,
Is there a table that maintain the relationship between Postal Code and Region?
If User keyed in the postal code, it would be able to identify the region.
Is there a place to configure it in SPRO?
Thanks
Bye

Hi,
As it was suggested in different threads, you may think to continue updating the address with the BAPI_ADDRESS** and right after the commit, simply trigger XD02 transaction in batchinput + ensuring that ZAV_FLAG is checked in the initial screen then save. This would re-synchronise the master data with the address.
An alternative in one step would be to trigger class CMD_EI_API directly with one of the MAITAIN methods.
Additionallly, SD_CUSTOMER_MAINTAIN_ALL is used in standard during the maintenance of a consumer using the standard customer master data transaction XD01 & XD02.
It is not intended to be used out of the transaction and in no case it should be used out of its original context. Due to the specificity of the function module, out of the original context we may face limitations and data inconsistencies.
This is precisely what you face in your case.
For the maintenance of customers, there is NO BAPI and NO direct function module.
There are some functions modules like the one above where the name is looking nice. But these should not be used.
Below ECC 2005 (6.00), the only solution was batch input and DEBMAS idocs. See note 384462
Starting with ECC 2005 (6.00) and above: a synchronisation tool has been introduce. See class CMD_EI_API and VMD_EI_API
Hope this helps
BR
Alain

Moved into New Build in August - still no phone li...

I know from reading various forums online that ours is not a unique problem but I'm not sure how it can be resolved. In a nutshell we moved into our new build home at the beginning of August. Once we had received confirmation of the completion date I placed my order with BT for a new phone line. I was advised that it would probably be easier to sort out the phone first and then add on broad band when that was done. My order was placed on 31 July. I was told an engineer would attend on 20 August to connect us up. So far so simple but then it all goes wrong. I check online and the engineer should be with me between 8 and 1. That's all fine. I'm working but my husband will be in as he is on a late shift. Come 12.30 no sign of the engineer and now my husband is concerned that if the engineer does show up, he will need to leave for work before the work is done. I call BT from work - I'm told that the engineer is en route but that he's been delayed. My husband and I therefore agree that I will leave work at lunchtime and be in should the engineer arrive in the afternoon. I call up again in the afternoon - I'm told that there is no engineer en route, I should never have been told that. The connection is delayed because of some outstanding works that need to be done. Thus begins the series of lies and untruths that lead us here. I am told time and time again that works will be done by X date, only to receive a text message telling me that it is not possible to provide the update and that BT will contact me again in due course. Then begins the passing of blame - BT tell me that my developer hasn't completed all the ground works, my developer tells me they have and that it is Open Reach who are delaying. This goes on for many weeks and many phone calls. Eventually I'm told that there is to be a meeting between my site manager and Open Reach on the site on Monday 28 October. Surprise surprise Open Reach fail to attend. Not only that, but they they refuse to reschedule despite requests from the site manager. There is clearly a communication issue here - my developer tells me they have done all they need to do. They are therefore not going to do anything else as they don't know what they need to do. The meeting would at least (one hopes) have cleared that up. I have called BT today and been told that a site surveyor is attending our site on Friday but it seems no one has bothered to tell the site manager (obviously I have passed this on and asked him to call to check arrangements).
So here we are many weeks on and still no phone line. I don't feel like I am getting any sort of proper answer from BT about what the issue is and of course Open Reach won't deal with me direct.
Given the number of discussions about this on various forums, does anyone have any advice or tips on how to resolve this. I know it seems like a small issue but it is starting to impact on us. For example we had some bad news in August that required making numerous overseas calls which we had to make on our mobiles. It really is beyond a joke now and I cannot see that it will be resolved this year!

Hi Kale1210,
Welcome to the Forum and thanks for posting. I can look into this for you if you wish. Drop me an email with the details, including order references etc. You'll find the "contact us" form in the about me section of my profile. Once I have the details we'll take it from there.
Cheers
David
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

Unable to display customs document in SAP GTS

Hello,
I am using SAP GTS 7.2 Compliance services. SPL and Embargo services are working well (I am not using License determination).
Indeed, when I save a sales order in ERP, it is effectively checked for compliance, as I receive a message when it is blocked by GTS..
In GTS, I can check that concerning business partners are effectively blocked, using:
"Display Blocked Business Partners" and "Display Business Partners with Embargo Situation".
But I cannot display any customs document in SAP GTS, using transaction /SAPSLL/CUHD_DISPLAY (Display all documents) or SAPSLL/CON_BLOCKED_DOCS_EXP (Display blocked documents).
I get the following error message "No data was found for the selection criteria specified".
As I understood, SAP GTS performs the compliance checks not on ERP documents but on corresponding GTS customs document. Thus I guess they are effectively created somewhere! If it was not the case, I guess the process should not work.
When I look in the audit trail of SPL for documents, I can see all the SPL checks that have been performed. Looking in the corresponding table "/SAPSLL/SPLAUD", I can even find the numbers of the different customs documents...
But there is nothing in table "/SAPSLL/CUHD", where they should be copied... The only entries I found concern biling documents that were transferred for customs purposes...
Could you please help me on this matter?
Many thanks,

Hi Sameer,
Thank you for your fast answer. I checked in the debug mode creating a breakpoint at statement RFC and it effectively stops at RFC /SAPSLL/API_6800_SYNCH.
But when I check the log in transaction SLG1, nothing appears concerning /SAPSLL/API_6800_SYNCH.
I think the customs document is effectively created in GTS as I can see it has a number assigned in the audit trail for SPL screening. And compliance services work.
Though when going through the transaction of displaying all documents in GTS there is nothing. Table "/SAPSLL/CUHD" is empty (except some billing documents that were transferred for customs purposes).
This is really weird... Anyway, thank you for your help.
Kind Regards,

HT201077 After updating my iPhone4s to the lastest update my photostream stopped updated onto my comuter. From my phone it looks like pictures have been moved into the photostream folder... but they are not showing up on my computer. Help!

After updating my iPhone4s to the lastest update my photostream stopped updated onto my comuter. From my phone it looks like pictures have been moved into the photostream folder... but they are not showing up on my computer. Help!
I have signed out then back into the cloud. I have comfirmed location of the photostream folder. I have have even restored settings on my phone. any ideas on what I can do to get it working again? or do I have to accept defect, and manually save my photos?

There's a whole lot to read in your post, and frankly I have not read it all.
Having said that, this troubleshooting guide should help:
http://support.apple.com/kb/TS1538
In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it.

Everytime I try and sign into my iCloud account it tells me I can't log in due to a server error, but there is nothing wrong with my server . It also wont allow me to view any of my Photos or Documents that i have backed up.

Everytime I try and sign into my iCloud account it tells me I can't log in due to a server error, but there is nothing wrong with my server . It also wont allow me to view any of my Photos or Documents that I have backed up. Please help

Hi,
Are you running any Anti-virus software or do you have your firewall turned on? If so, disable them and try again. If that doesn't work, delete the iCloud account and then sign it back on again.
Make sure you are running the most current version of the iCloud Control Panel:
http://support.apple.com/kb/dl1455
Cheers,
GB

Customer no moving into GTS due to Postal code error.

Similar Messages

Maybe you are looking for